Performed tiger clean install on old pbg4 and no ilife

Hi all. I just performed a clean install on my old pb g4 (titanium) and now have no iphoto, imovie, etc. apps. I don't have a copy of the ilife disc as I've always just received my computers with the apps on them. How do I get these apps without having to buy new ilife 06? I don't have original discs that came with computer as I got it used.
Can I use target disc mode to move apps from my new macbook c2d to old pbg4? Both are running 10.4.8.
Thanks...:)
macbook c2d g4 ibook, graphite ibook, ipod Mac OS X (10.4.8)

The Tiger retail install package does not include iLife which is sold separately or included with the Tiger install package that ships with a new Mac.
The apps included with the Tiger retail install package are listed here.
http://www.apple.com/macosx/techspecs/
Was an iLife version included with the install package that shipped with this Mac when new and if so, which version? If yes, you no longer have the install package for this Mac?
Or did you purchase iLife 05 or 06 separately and no longer have this install disc?
Either way, you are in trouble.
Doubtful the iLife applications on your new MacBook are Universal which is required to run the applications on a PPC Mac. More than likely they are Intel binaries only so will not work on a PPC Mac and regardless, doubtful just moving the applications over this way will work.

Similar Messages

While intending to perform a clean install of Mountain Lion while continuing with old apps and files, is it a waste to restore a backup that was made while running Mountain Lion as an UPgrade from Lion?

While intending to perform a clean install of Mountain Lion while continuing with old apps and files, is it a waste to restore a backup that was made while running Mountain Lion as an UPgrade from Lion?
Originally I was running Mountain Lion as an UPgrade from Lion. I created a backup in Time Machine, performed a clean install of Mountain Lion, then I proceeded to use Time Machine to restore the back up.
When thinking about the essence of a back up restore, it occurrs to me that for all I know, I may have just wated my time IF Time Machine also restores all the old unneeded files that remain from Lion after an upgrade.
Since the backup was made while running Mountain Lion as an upgrade from Lion, did restoring this backup defeat the purpose of a clean install by reinstalling old Lion files?
If so, how can I re-do the last portion of the process so that I get all my home-folder files and apps back without the full bulk of old Lion files? Migration assistant I'm guessing?
-Chris

Hello John!
Thank you for your response which solved my problem. For other users who may stumble upon this, I'll clear up the confusion and share how I solved the problem with your help; When looking for answers to my computer problems, finding unresolved questions where person B offers a solution and person A never comes back and says "That worked, thank you.", it demonstrates a "k-thnx-bye" user mentality that leaves others with the same problem lost. Without further ado:
It is not clear what you did because the meaning of "clean install" is vague. You can erase a volume and install an OS which leaves none of its previous content intact,
This is what I did: I erased the volume leaving no previous content intact, while then installing OS X Mountain Lion.
or you can upgrade an existing OS (or reinstall the same one) which does not alter your user - installed files.
An upgrade to Mountain Lion from Lion is what I started with initially before erasing anything. This was undesirable. Since this can cause Macs to run slower (especially whereas I'm using a mid-2011 Mac Mini), my goal was to go from operating within an upgrade to Mountain Lion, to operating within an installation of Montain Lion that was not preceded by any other oprating system.
Hence a "clean install of Mountain Lion while continuing with old apps and files" is confusing.
Well put and understood. What I should have said was:
1.Erase the volume
2.Install Mountain Lion clean
3.Confirm that Mountain Lion is functioning properly
4.Proceed to use either Time Machine or Migration Assistant to Import/Migrate/Copy over only two things; My old apps (That had been stored originally in the designated Applications folder) and all files and folders originally stored in the home folder under users.
If you restore from a Time Machine backup then all modifications that occurred subsequent to that backup become erased. It renders moot any OS X upgrade performed subsequent to that backup.
That makes sense and is just as I later suspected.
If so, how can I re-do the last portion of the process so that I get all my home-folder files and apps back without the full bulk of old Lion files? Migration assistant I'm guessing?
Yes.
This is what I did and everything works perfectly. Thank you so much once again!
-Chris

What is largest solid state drive I can install in MacBook Pro 8,2? I want to perform a clean install of Mavricks and dump my old hard drive.

What is largest solid state drive I can install in MacBook Pro 8,2? I want to perform a clean install of Mavricks and dump my old hard drive.

If the bank account permits, I suggest getting a 1 TB SSD anyway. One cannot have too much storage.
Unless you are having issues with your current installation, a 'clean' install is not necessary. It would be more efficient to clone your current drive to the new SSD, test it, and then do the swap. The installation of Mavericks over Snow Leopard can be done either before or after the cloning process.
Ciao.

I performed a clean install, and upgraded to Yosemite. Now iPhoto is gone.

I recently performed a clean install of Yosemite and I am able to install all my old apps expect iPhoto.
It reads, "iPhoto failed to download" "Use the purchases page to try again". Ive ben trying for the past 5 hrs.
I have a good strong internet connection, I am signed in to app store.
This is the only app that will not install.
Please advise

If a partial download is hanging, have a look at the Launchpad. Is there a progress bar below iPhoto?
Then wait and see, if there is any progress. If not, delete iPhoto from the Launchpad:
Hold down on iphoto until it wiggles and you are seeing a cross in the upper left corner.
Click the cross to uninstall.
Restart your Mac to clear the App Store caches.
Reload the App Store "Purchased" page by pressing ⌘R.
Then try to download iPhoto again.
Another problem may be a firewall interfering. Disable Little Snitch or similar.
If all fails, try the download again while running the Mac in Safe Mode. That will disable non-standard extensions. See this, on how to start-up in Safe Mode: Mac OS X: Starting up in Safe Mode

Cannot perform a clean install of CF 10 - ODBC Agent and ODBC Server are not in Services - Win2k8 R2

I've tried to perform a clean install on a Win2k8 R2 x64 server several times and I can't seem to get it to install.
I was upgrading from CF 9, which took several attempts. I eventually got CF 10 working and running with the latest updates. But the server would only run for about 15 minutes and everything would come to a screaching hault. ColdFusion pages would fail to load with no error. The pages would hang and wait for the server to respond, which it never did. Restarting IIS would fix the problem.
I have about 20 CF sites on the machine. I came accross an article that talked about pool sizes, etc. I ended up trying a few things with the Web Server Configuration Tool, and as I was adding/deleting servers, I got an error that some application unexpectedly quit, but it wasn't the wsconfig tool. This happened about 3 times as I was deleting servers that I had previously added. Then I tried loading the CF Admin and I got a 500.0 internal server error.
So I bit the bullet and figured I would start all over again. I uninstalled CF 10... now there's nothing on the machine. Re-installed CF 10, and I get the same 500.0 Internal Server Error. I uninstalled, restarted, installed... same thing. Then I found an error in the event viewer that reads:
The description for Event ID 0 from source ColdFusion 10 ODBC Server cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ColdFusion 10 ODBC Server error: 0
StartServiceCtrlDispatcher Error!
Then I found out that neither the ColdFusion 10 ODBC Agent or the ColdFusion 10 ODBC Server have been installed... at least they're not showing up in the list of services. msconfig also shows that they don't exist at all. I tried reinstalling several times and I can't get them to show up.
PS: It's 6:15 AM and I've been working on this since 10 PM last night. I NEED HELP! Thanks!

Hello,
Once you move your application from any prior version of ColdFusion to ColdFusion 10, you will have to tune your application, as the architecture changed from JRun to Tomcat.
You can refer to the article http://blogs.coldfusion.com/post.cfm/tuning-coldfusion-10-iis-connector-configuration for parameters, that needs to be tuned appropriately to make CF connector works flawlessly.
Hope this helps
Regards,
Anit Kumar

Is there any advantage in performing a clean install?

I'm curious... My 80GB internal hard drive is nearly full so I will be upgrading to a 250GB.
Is there any advantage in performing a clean install of Tiger on the new HDD and then copying across files etc from the old one using migration tool? (the idea being it will cleanse any old files, code from the numerous OS upgrades as it originally had panther on)
Or will the system be just as fast by using the disk utility to copy the contents (OSX and all) of the 80 GB across to the new 250GB and then set that as the boot drive?

If you are asking if there is an advantage to doing an erase and install, then yes, you'll be able to ascertain any of the issues you've been having with Apple software are hardware related issues if before the migration assistant you have trouble with any Apple applications. Cloning one drive to another, you'll find yourself with whatever corrupted fonts, cache, preferences files you had before. I would though make a backup of your data to a second drive before attempting the move, simply because it is wise to have at least two copies of your data at all times.

How to perform a clean install of Windows 8 / 8.1

This document describes, how to perform a clean install of Windows 8.
Windows 8 System Requirements
1 GHz or faster processor (with PAE, NX and SSE2 support)
1 GB RAM (32-bit) or 2 GB RAM (64-bit)
16 GB available hard disk space (32-bit) or 20 GB (64-bit)
DirectX 9 graphics device with WDDM 1.0 or higher driver
Additional requirements to use certain features:
To use touch, you need a tablet or a monitor that supports multitouch.
To access the Windows Store and to download and run apps, you need an active Internet connection and a screen resolution of at least 1024 x 768.
To snap apps, you need a screen resolution of at least 1366 x 768
More Info: http://aps2.toshiba-tro.de/kb0/TSB2903E20000R02.htm

I have a new SSD drive and need to either migrate my old HD data, including the Windows 8.1 OS or do a a clean install. I have obtained the ISO, prepared the boot for the flashdrive and downloaded the install software. It asks for the product key. I used the suggested BIOS reader and obtained "a" product key off the BIOS and used that it but (as above) it does not recognize the image.
How id I get my single Windows license onto my new SSD HD? Reload, clean install, ???
How do I get the proper product key or confirm it is correct?
It is a new system with little data that I need to copy. I just want the operating system. I have the driver disc that came with it.

After performing a clean install, is my startup disk correct for apple stock 1TB fusion hard drive? I think I may have to reformat.

After performing a clean install on a stock apple 1TB fusion Hard Drive it appears as things got reversed and showing my startup as not using the SSD portion. The SSD portion of the fusion drive used to be on top in disk utility, now its on the bottom. It also appears that I have to many partitions. Im thinking i need to reformat my Hard Drive again. I can't seem to find any answers.
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group C2619AFE-0EB5-4721-8C50-3F3DBA520D1B
    =========================================================
    Name:         fusion
    Status:       Online
    Size:         1120333979648 B (1.1 TB)
    Free Space:   114688 B (114.7 KB)
    |
    +-< Physical Volume 583AAEA9-E333-4A83-9BE3-E937396E9248
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     120988852224 B (121.0 GB)
    |
    +-< Physical Volume B0C1CB16-D46F-4387-A679-B55392BB7934
    |   ----------------------------------------------------
    |   Index:    1
    |   Disk:     disk1s2
    |   Status:   Online
    |   Size:     999345127424 B (999.3 GB)
    |
    +-> Logical Volume Family FB42B9F4-CB77-4162-831B-7DCB7816E760
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume C0B8479B-C51C-45BF-B59B-1AA5DF3A3B83
            Disk:                  disk2
            Status:                Online
            Size (Total):          1111826497536 B (1.1 TB)
            Conversion Progress:   -none-
            Revertible:            No
            LV Name:               Fusion
            Volume Name:           Fusion
            Content Hint:          Apple_HFS
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         121.0 GB   disk0s2
   3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:          Apple_CoreStorage                         999.3 GB   disk1s2
   3:                 Apple_Boot Boot OS X               650.0 MB   disk1s3
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Fusion                 *1.1 TB     disk2

Hi,
According to your descriptioin, I don't think this is system problem, it should be Intel driver problem. It would be contact Intel to confirm this issue whether this is their driver problem.
Roger Lu
TechNet Community Support

I am using an Mac PPC version 10.5.8 and I am trying to download the correct version of Flash Player. I did once but I had to install a "Clean Install" of my computer and when finished I had put back the new Flash Player I just installed well every time

I am using an Mac PPC version 10.5.8 and I am trying to download the correct version of Flash Player. I did once but I had to install a "Clean Install" of my computer and when finished I had put back the new Flash Player I just installed well every time I try install the new player it is place in my Trash Folder and I can not get Player to work. I did everything I was to install it correctly but it still does not install it correctly. Can some help me. Bob

Some MacBook Pro versions cannot be upgraded past 10.6.8; others are maxed out at 10.7.5. newer models can go all the way to 10.10. So it is important to know exactly what version you have--there may be close to 40 variants produced since the MB made its debut in 2006.
You can safely give us a snapshot of your model and its current config that will allow us to deternmmine your model and its upgrade potential, plus show it you have any software that may impede any upgrades. Please download and install this free utility:
http://www.etresoft.com/etrecheck
It is secure and written by one of our most valued members to allow users to show details of their computer's configuration in Apple Support Communities without revealing any sensitive personal data.
Run the program and click the "Copy report to clipboard" button when it displays the results. Then return here and paste the report into a response to your initial post. It can often show if any harmful files/programs are dragging down your performance.
Remember that, on leaving OS10.6.8, you lose the ability to run older softare written for older PowerPC Macs (yours in Intel-based). Programs such as Office 2004 will no longer work (min of Office 2008 needed to work on newer OS versions), and AppleWorks will stop working completely

Performing a Clean Install

I, like many others before me, have noticed some lagginess with the core animations (expose, minimizing, dock magnification) after doing an upgrade installation of leopard. I want to perform a clean install, as people who have done this say that it really helps with this problem and other speed issues in general.
What I would like to do is perform a clean install and then reload all of my documents and applications back onto the disk. What is the best way to go about doing this? I am also interested in freeing up some HD space so it would be nice to not have to do a full restoration.
Would it be unwise to try and selectively restore items back to my drive using time machine? Should I just do a clean install and then a full system time machine restore, or would that just bring back my same speed issues?
I'm just looking for a little insight into what would be the best and safest way to go about a clean install. Thanks a lot!
Nathan Peffer

Use CCC (carbon copy cloner) to clone your system to an external firewire connected hard disk to a partition that is slightly larger than the in use size of your MBP disk.
Verify that you can boot from the clone.
Disconnect the clone disk.
Do an erase and install on your MBP hard disk.
Apply all of the software updates.
Reinstall any purchased applications that you use.
Connect the cloned disk.
Move your data from the clone to the MBP using finder on as as needed basis.
Keep the clone until you are satisfied that you have recovered everything that you need (3 months to a year).

How do I perform a clean install of ios8 on my iPhone 5

I would like to perform a clean install, meaning not putting ios8 on top of ios7.
Is there an advantage to doing this? When I installed Mavericks on my MBP I had the Genius Bar do it and it was like a new Mac,
So, my thoughts are that a clean install, starting as if it were a new phone would be the same.
Is this true?
How would I do that after backing up through the latest iTunes.
Would I need to set up pop mail accounts from scratch or would that come back in the restore backups
As you can see, I am unsure as to the best way to make my iPhone 5 run trouble free with ios8
Advice and instructions are welcome
jojoguitar

Okay....so Apple does have a guide related to Mass deployment which includes a rough way to do a clean OS X Server clean install. You need to use a NetBoot Lion Server as a boot, but it works.
http://support.apple.com/kb/HT4746
Use these steps to create a NetRestore image of an un-configured Lion Server:
Install OS X Lion, and then Lion Server. This server will be used to create the NetRestore image.
On the server, install the app named "Install Mac OS X Lion" from the Mac App Store (a network connection is required for this process).
Install the Server Admin Tools from http://support.apple.com/downloads/ on the server.
Open the "Install Mac OS X Lion" application, and install to an empty volume. This volume can be a spare partition or external hard drive. Be sure to click the Customize button and to select the Lion Server software.
Once installation is complete, the server will restart from the newly installed volume. Instead of completing the setup assistant, press Command-Q to quit the assistant.
Select the option to shut the server down.
Restart the server and hold the Option key.
When the Startup Manager appears, select the volume which you've already configured Lion Server on.
Open System Image Utility and create a NetRestore image from the newly installed (and still un-configured) volume. If you'd prefer to image the volume after it has already been configured, you can proceed with the setup assistant before booting back to the original installation created in step 1.

How to Perform a Clean Install of Panther 10.3

I am currently running Jaguar 10.2.8 (no OS9) on an iMac G3/400, 320 megs ram, dsl internet. I want to perform a clean install of Panther 10.3 (not the upgrade or archive + install). After placing the first Panther disc in the slot, I get a screen on which I click the install icon, I then click the restart, the machine reboots, gives me an installation screen asking me to choose the language, I choose English, then click "continue", I then get a screen telling me I cannot install OSX because the "firmware" is not up to date. I then have to click on the "close" button, then use a pin to get the cd out of the machine. I thought the only firmware update necessary was when you want to install Jaguar over OS9. How can I fix this situation so I can install Panther? I am not much of a techie, fairly new to Mac so please make your reply easy to follow. Thanks.

The firmware update for your model is required for running OS X regardless of which version you install. You will need to install OS 9.1 or later in order to install the firmware update if the computer has not been updated.
OS 9 should have been included with the computer as part of the original software that came with it. You can install OS 9 on the same volume on which OS X is currently installed or you can erase the drive before installing OS 9. After you perform the firmware update you can do an Erase and Install of Panther.
You should avoid using a pin to forcibly remove a disc from the optical drive. Just restart the computer and hold down the mouse button to have the disc ejected. See the following:
Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this:
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following:
/usr/bin/drutil eject.
If this fails then try this:
Boot the computer into single-user mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

How to perform a clean install of Mountain Lion on MBA without usb?

I purchased a new MBA last November and I want to perform a clean install of Mountain Lion (for various reasons), however, the MBA didn't come with an install usb drive from Apple. When I go to the app store it says I need to buy the OS even though it's already on my computer. After all the searching I've done I can't find the answer on what I need to do. Do I need to buy Mountain Lion even though it came with my computer? Please help, thanks!

If you purchased your MacBook Air in November, it means that your Mac already came with OS X Mountain Lion, so even if the App Store tells you that you haven't purchased it, the truth is that it's registered to your Apple ID and you can redownload it without any problem.
Hold Command and R keys while your Mac is starting to start up into OS X Recovery and try to reinstall OS X. It will ask you for the Apple ID you used to set up your MacBook Air, so introduce it. If the OS X download starts, close the installer by pressing the red button at the top left corner of the window, because you can reinstall OS X.
Then, open Disk Utility, choose Macintosh HD in the sidebar, go to Erase tab and erase the drive. Finally, close Disk Utility and reinstall OS X. Make a backup of your data before erasing your disk

How to Perform a "Clean Install" - Offline installer link not working...

The thread containing - "How to Perform a Clean Install of Flash Player in Mac OS X" - was an answer given by Mike M. several times in this forum. I attempted to access the "offline installer" link that was offered, but it does not seem to be working. Does anyone have an updated link to a functional offline installer that I can use to finally download Flash Player for Mac OS X v. 10.9.5?
I receive an error message stating "Error: Unable to proceed with the installation."
Many of the photography and game websites I use (almost all, actually) FP, and I would really love to get back to my daily routine soon!
Best Regards,
Mel R.

Hi Mel,
The correct link is posted at the bottom of the Installation problems | Flash Player | Mac page, in the 'Still having problems section'. The download links recently changed and it appears the FAQ was not updated. I have updated the with the help page URL as it's less likely that this link will change, and if it does, a re-direct to the new location would be implemented.
Maria

Cannot load computer, Cannot perform a clean install

Hello everyone,
Firstly i am primarily a PC user, so bear with my Mac ineptitude. The computer is a MacBook Pro 15" A1286 model - Early 2012 (i think).
I haven't used my MacBook for a couple of months and when i recently went to power it on (full battery charge) i am stuck with a loading/updating screen.
The bar goes about half way and then the computer simply shuts down - so i cannot even load the OS.
Im not sure whats going on, so now i basically want to perform a clean installation / format drive.
So i follow some instructions online and one article says to hold down 'Command + R' when turning the computer on - which brings up the disk utilty fine.
I then proceed to try and erase the drive, format the drive, partition the drive, reinstall os x - nothing works
I am hit with an error message - "Couldn't unmount disk".
After reading several guides, it seems i might be able to boot off another device in order to be able to perform a clean install by loading a file onto a DVD/Flash Stick - but i cannot download anything off my AppStore account as my Mac is not working.
If anyone could point me towards a workable solution, it would be greatly appreciated.
Thankyou

Thanks for the fast reply, however it seems that the first aid utility has detected nothing abnormal with the drive.
Could it really be that the HDD is unusable?
I would still be very interested in any other tips or suggestions.
Thankyou

Performed tiger clean install on old pbg4 and no ilife

Similar Messages

Maybe you are looking for