Performing a manual replica of a new protected workload to an existing protection group
I have read much about creating a manual replica of a datasource when
creating a new protection group. Hopefully my question is simple to answer??!! If I
modify an existing Protection Group and select manual replication, will this only apply to the new protected workload in that protection group or will it apply to all the existing protected workloads that are successfully synchronising
also?
I am using DPM 2012 R2.
Thanks
Mark
That will only apply to newly added Datasources.
attached a Screesnhot for a newly added DS to an existing PG with Manual creation of replica
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat
Similar Messages
-
in ical I just added new calendars to a pre-existing calendar group, I can make events with these calendars, but not reminders, any suggestions?
Hi,
Lion has changed the way reminders (todos as was) work. They now seem to need to be in a seperate calendar.
In iCal open the File menu and select New Reminder List... and select where to put it.
Best wishes
John M -
Manual replica creation of DeDup Volumes
Hi,
we are on the way to update a lot of our file Servers to Windows Server 2012.
DeDup will be enabled on the volumes.
We are going to to backup these voumes via DPM2012SP1.
Now my question: Is it possible to create a Manual replica (for example with the help of USB external drives) for dedup enabled volumes or does the replica creation process have to be triggered from within DPM console so that all data will be transfered
over the Network?
Thanks in advance
regards
/bkpfast
My postings are provided "AS IS" with no warranties and confer no rightsHi,
Unfortumatly, you cannot perform a manual replica creation for a deduped volume in a deduped state, however, you can perform the following, but don't think it would provide you much benefit.
1) On the protected server that has the dedup volume you want to protect, create a dummy folder in the root of the volume.
2) On the DPM Server, protect the dedup volume, except uncheck the dummy folder. Choose to make a manual replica.
3) Copy the contents of the protected volume to the replica volume using any method you choose.
4) Run the mandatory consistency check to make sure the data is equivelent.
5) On the DPM Server, modify the PG and now include the dummy folder - basically uncheck the drive letter and recheck it so DPM will protect the whole volume now.
6) On the protected server, delete the dummy folder.
7) Re-run a new consistency check, and DPM will now protect the volume in a dedup state. This will result in only transfering deduped blocks, and leaving non-dedup blocks intact.
Again, that may not buy you much and may be a waste of time - but give it whirl.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
Photoshop CS2 opens but wont perform any task (open jpgs, create new jpgs etc). Other CS2 progs such as indesign are fine. MAC shop, couldn't fix, said I should try install op system 4 Powerbook G4-dont have discs- can I get them? or other solution? Am using OS 10.4.11 Thanks for any help
Hi
I actually dont think its Lion (sorry i put that as couldn't remember) as not on that computer at the moment, its at home, I am at work. I know CS2 is compatable with whatever OS I am using because I can using CS2 indesign etc and I was able to use CS2 photoshop until I updated the Camino browser (I believe this is when it stopped working). I have CS5 but it wont work at all on my Powerbook G4.
I can send a message later with the OS I am using and maybe you can suggest other help? They told me in the MAC shop to try and get the installation discs. They also said I would be able to get these via Apple's 'media replacement programme' which I cannot find anyway! To be honest, I am not even sure getting the install discs will work but I'll try whatever I need to try and get Photoshop working on it again!
Thanks -
I have a scenario with the three nodes with server 2012 standard, each running an instance of SQL Server 2012 enterprise, participate in a
single Windows Server Failover Cluster (WSFC) that spans two data centers.
If the nodes in the primary data center are unavailable due to data center outage. Then how I can able to access node in the WSFC (Windows Server Failover Cluster) in the secondary disaster recovery data center automatically with some script.
I want to write script that can be able to check primary data center by pinging some IP after every 5 or 10 minutes.
If that IP is unable to respond then script can be able to Perform Forced Manual Failover of Availability Group (SQL Server) and WSFC (Windows Server Failover Cluster)
Can you please guide me for script writing for automatic failover in case of primary datacenter outage?please post you question on failover clusters in the cluster forum. THey will explain how this works and point you at scipts.
You should also look in the Gallery for cluster management scripts.
¯\_(ツ)_/¯ -
I have a scenario with the three nodes with server 2012 standard, each running an instance of SQL Server 2012 enterprise, participate in a
single Windows Server Failover Cluster (WSFC) that spans two data centers.
If the nodes in the primary data center are unavailable due to data center outage. Then how I can able to access node in the WSFC (Windows Server Failover Cluster) in the secondary disaster recovery data center automatically with some script.
I want to write script that can be able to check primary data center by pinging some IP after every 5 or 10 minutes.
If that IP is unable to respond then script can be able to Perform Forced Manual Failover of Availability Group (SQL Server) and WSFC (Windows Server Failover Cluster)
Can you please guide me for script writing for automatic failover in case of primary datacenter outage?You are trying to implement manually what should be happening automatically in the cluster. If the primary SQL Server becomes unavailable in the data center, it should fail over to the secondary SQL Server automatically. Is that not working?
You also might want to run this configuration by some SQL experts. I am not a SQL expert, but if you have both hosts in the data center in a cluster, there is no need for replication between those two nodes as they would be accessing
the database from some form of shared storage. Then it looks like you are trying to implement Always On to the DR site. I'm not sure you can mix both types of failover in a single configuration.
FYI, it would make more sense to establish a file share witness in your DR site instead of placing a third node in the data center for Node Majority quorum.
. : | : . : | : . tim -
I have a scenario with the three nodes with server 2012 standard, each running an instance of SQL Server 2012 enterprise, participate in a
single Windows Server Fail-over Cluster (WSFC) that spans two data centers.
If the nodes in the primary data center are unavailable due to data center outage. Then how I can able to access node in the WSFC (Windows Server Fail-over Cluster) in the secondary disaster recovery data center automatically with some script.
I want to write script that can be able to check primary data center by pinging some IP after every 5 or 10 minutes.
If that IP is unable to respond then script can be able to Perform Forced Manual Fail-over of Availability Group (SQL Server) and WSFC (Windows Server Fail-over Cluster)
Can you please guide me for script writing for automatic fail-over in case of primary data-center outage?+1 to David's comment. I would not suggest to run a script automatically. During such failover you might have data loss and decision has to be made with business owners during disaster.
During such situation, you need to start cluster service in force quorum mode (/fq switch) and then perform manual failover of AG to DR site.
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle -
Where can i find iPhone service manual link to downloadthe newer version?
where can i find iPhone service manual link to downloadthe newer version?
i am not sure which one but wish you can help with some possible links
in ThaiClick Support at the top of this page, then click manuals
-
Photoshop CS2 opens but wont perform any task (open jpgs, create new jpgs etc). Other CS2 progs such as indesign are fine. MAC shop, couldn't fix, said I should ty install op system 4 Powerbook G4-dont have discs- can I get them? or other solution?
Hi
I actually dont think its Lion (sorry i put that as couldn't remember) as not on that computer at the moment, its at home, I am at work. I know CS2 is compatable with whatever OS I am using because I can using CS2 indesign etc and I was able to use CS2 photoshop until I updated the Camino browser (I believe this is when it stopped working). I have CS5 but it wont work at all on my Powerbook G4.
I can send a message later with the OS I am using and maybe you can suggest other help? They told me in the MAC shop to try and get the installation discs. They also said I would be able to get these via Apple's 'media replacement programme' which I cannot find anyway! To be honest, I am not even sure getting the install discs will work but I'll try whatever I need to try and get Photoshop working on it again!
Thanks -
Code to perform a manual GC for running JVM
Hi,
Can anyone share the code to connect to a running JVM and perform a manual garbage collection when the heap size goes beyond say 1.2GB or so.
thanks
vbevbejava wrote:
Fine, agreed. but "may not be" can be some time "may be" rite!!! so whenever possible let it do that !!
As of now, I have configured an OEM alert which will send an email whenever the Heap Size goes beyond 1.3GB. Then I use the button "Perform GC" in the jconsole which help in reducing the Heap Size and there by avoiding OutOfMemory error.
All I want is to do this "Perform GC" used by jconsole, using a java code. The java code should connect to a running JVM, check the Heap Size every 5minutes or so, and perform GC
Is there a code which can perform this?
thanks,
vbeDon't bother. The gc is guaranteed to have run before an OutOfMemory error is thrown. -
Revision: 7499
Author: [email protected]
Date: 2009-06-02 16:10:08 -0700 (Tue, 02 Jun 2009)
Log Message:
Addendum to fix for BLZ-233 - adjust visibility of new internal heartbeat util methods to protected from private.
QA: No
Doc: No
Checkintests Pass: Yes
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-233
Modified Paths:
flex/sdk/branches/3.x/frameworks/projects/rpc/src/mx/messaging/ChannelSet.asinspired2apathy wrote:
... The goal is a ScrollPane that automatically wraps the text inside it. I've just about got it, but I have one thing that's not working. If I just put the JTextArea{s} in as the Editor, then you lose the any text that doesn't fit inside whatever the initial size was. Instead, I put the JTextAreas inside a JScrollPane which works fine, except that I still have to determine the size of the JScrollPane in advance. I would like to make each Editor/JScrollPane start out with just a single line of text and expand until it reaches a certain small number of lines.
... What am I missing?THE BASICS. See if this isn't what you are trying to do.
import javax.swing.JFrame;
import javax.swing.JScrollPane;
import javax.swing.JTextArea;
public class Test
public static void main(String[] args) {
JTextArea ta = new JTextArea();
ta.setLineWrap(true);
ta.setWrapStyleWord(true);
JScrollPane sp = new JScrollPane(ta);
JFrame f = new JFrame();
f.getContentPane().add(sp, "Center");
f.setBounds(0, 0, 400, 300);
f.setDefaultCloseOperation(f.EXIT_ON_CLOSE);
f.setVisible(true);
}OP, your code was too long and complicated for me to compile and run. However, aren't you forgetting the two simple methods <tt>JTextArea.setLineWrap()</tt> and <tt>JTextArea.setWrapStyleWord()</tt>? Furthermore, I absolutely see no need for you to extend SWING components for demonstration this simple -- that is, if I understand your problem correctly. -
SAP Performance Testing - Manual or Automated?
Our organization is attempting to develop a regular performance testing effort. Everything wehave read points to using a tool, such as LoadRunner, to do performance testing. However, we're just starting and simply want to baseline several transactions, jobs, programs, etc (less than 30 items). We have tools to monitor the backend results and grab metrics, but no tools to automate the testing itself. Does anyone do their performance testing manually? What are some advantages to doing this?
Hi Yogi,
I think HP LoadRunner is one of the best tools for SAP performance testing. I did it for many years. It is now included with Solution Manager. Here is the link for for HP Mercury regarding performance testing.
https://h10078.www1.hp.com/cda/hpms/display/main/hpms_content.jsp?zn=bto&cp=1-11-126_4000_100__
Please check this site as well, it has lot of valuable information.
http://www.wilsonmar.com/1loadrun.htm
Regards, Nabi. -
just connected my new iphone 4s to my existing ITUNES to get old music and it wiped my contacts. Can i still get them back , i didn't manually back up my phone before
Contacts are not part of the backup. Contacts, when using your phone as intended, are synched to your computer's Outlook, Address Book or with a cloud service. If you haven't been using your phone as intended, then your contacts are gone.
-
Does my new Ipad and Ipod need antivirus protection?
Does my new Ipad and Ipod need antivirus protection?
well, it depends on how you define a virus, theorically, ios is not prone to viruses, and since ios has built-in security measures (link bellow) theres nothing to fear
and also-since there are more windows users (in theory) than ios users (and again the security) it will be way easier to target windows OS then IOS
http://images.apple.com/ipad/business/docs/iOS_Security_May12.pdf
PDF FILE NEEDS ADOBE READER / ACROBAT / IE WITH PLUG-INS
READ--> kaspery insisted for apple to open up ios architecutre so companies could devolp antivirus software, but apple made the pdf (above) to prove ios dosent need it
hopes this helps -
Impact of Addition of New Value Fields in the existing Op. Concern-COPA
Hi All,
Want to know the steps of adding new value fields in the existing operating concern in COPA?
What is the overall impact of addition of New Value fields in the running Operating Concern?
How do we test the addition of new value fields?
Is the addition of New Value fields to the running Operating Concern advisable?
Your support and advice is highly anticipated and appreciated.
Thanks & Regards
9819528669
Ohter details are as follows...
VALUE FIELDS : Defines the Structure of your Costs & Revenues. (Op. Concern 120 Value Fields)
1) The client requires three new value fields to be created. Value fields for :
- Other Airport Charges - International
- Cargo Commission Cost
- Personal Cost (Direct)
2) What are the Steps involved in creation of new value fields? The steps are :
1) Before creating new value field we need to check whether we can use already existing UNUSED value fields (There are 62 value fields created for the op concern 1000, in production the value fields TBUL1-L7 i.e. to be used (I assume) screen shot1 provided. My predecessor has used value field VV291, VV292, VV380 original description being TBUL3, TBUL4, and TBUL1. I believe he has changed the description in development client and created a transport request ref screen shot 2)
2) You can create new value field thru T-Code KEA6 (4-5 characters beginning with VV) u2013 My predecessor has reused the value fields originally created he has not created new one I believe. please provide give your comments)
3) Specify whether this field is for Currency or Quantity (currency defined in attribute of op concern and quantity defined by its own field u2013 unit of measure) u2013 My predecessor has configured the three value fields as Currency.
4) Describe how the values in this field are aggregated over characteristics. (SUM, LAS, AVG) u2013 My predecessor has aggregated all the three value fields as SUM and they are in Active status.
5) After the value field is created you have to add the value field (active status only) to the operating concern by Editing the Data Structure. (I guess this is done in the next step)
6) Assign newly created Value fields to the Operating Concern u2013 T-Code KEA0 (In development client the value fields are assigned to the op concern 1000 refer screen shot 3. In the production client also those three value fields exist (does it mean they are assigned? your comments please.) As they have the original description TBUL3, TBUL4, and TBUL1 refer screen shot 4.
7) After the Data Structure is defined you need to activate them. (creates plan vs actual database) u2013 Go to the data structure tab and Choose Activate. The status in dev client is Active with correct description but in the production client it is Active with the OLD description. After addition of the value field you need to regenerate the operating concern. T-Code KEA0 u2013 right?
8) Condition Types are assigned to Value Fields? Donu2019t know u2013 T-Code KE45 (I think this is NOT required in our case u2013 Please give your comments)
9) Define and Assign Valuation Strategy u2013 Cost assigned to Value fields u2013 T-Code KE4U (I think this is also NOT required in our case)
10) Define PA Transfer Structure for Settlement u2013 T-Code KEI1 (This step is crucial u2013 I think I have to to include newly created value fields, but am not aware how to do it and what is the connectivity or what happens after this is done)
Note: My predecessor has created a Transport Request No# KEDK902167 for the value fields created by him.
3) Whether my predecessor has performed all the steps for value field creation? How to test it and check that?
4) If yes then, Do I need to perform additional configuration or can I proceed to transport it to Production?
5) What is COPA Allocation Structure & PA Transfer Structure? Where and Why It is used?
6) What are the different methods of cost and revenue allocations in SAP?
7) I have checked the status of the value fields across clients, It is as followsu2026
Value Field Value Field For Description Development Quality Production
1 VV291 Other Airport Charges International TBUL3 Exists DNE DNE
2 VV292 Cargo Commission Cost TBUL4 Exists DNE DNE
3 VV380 Personal Cost u2013 Direct TBUL1 Exists DNE DNE
#DNE : Does Not Exist (assumed since the description given to value field is not the same as in development client.)HI sree,
ofter creation value field and saving that time reqwest number appeare copy the reqwest number and go through the se01 select that reqwest number select and transport click the truck symbole, and draft a mail to basis guyw.
Thank You!
Best Regards,
pradheep.
Maybe you are looking for
-
Multiple Users on Mac–Multiple Apple IDs?
I created a new User account for my daughter on one of our Macs and I want to give her access to my Apple ID–so she can use the Apps, etc. that I have purchased with my account. The Apple ID has already been linked to the OTHER User (my wife's) accou
-
If my network connection goes out briefly due to a problem at my ISP, FireFox immediately opens a "diagnose network problems" page. This is particularly annoying when I don't even have FireFox or any other software open. Ideally, I do NOT want FireFo
-
I have set up a playlist on my iPad I have iTunes Match and icloud. I want to sync my playlist onto my iPod from my laptop, but whilst all my music is available on the laptop, the playlist I set up isn't syncing what am I missing
-
Boot Camp - Windows Switching Utility?
I saw a utility called "Boot Champ" that was designed to allow you to boot windows from Mac OS without shutting down and using the option key. I wasn't very impressed with the utility... are there any other utilities that have the same properties tha
-
I Haven´t got the activation mail for apple id what can I do?
I Started a new apple account and I Waited for the activation mail, but i haven´t got it what can i do?