Performing check and potential update for status control table

Cheers Experts,
I searched in the forum, but I didn't find an answer.
I'm working on a 3.0B BW system.
After updating from PSA to an ODS, in the log I see the following line:
"Performing check and potential update for status control table" and double clicking on it, it says:
If data is loaded into an InfoCube, or existing data is edited (aggregated/compressed/deleted/got from a DataMart), then there is a change in  the potential reportability of the data , or the possibility of deleting data by request, or of aggregating or compressing.
This status of each one of these Cubes is stored in a status table, that is updated when there is any change to the status of a request in the Cube.
The system now analyzes the requests in the Cube and compares the calculated status with the status table.
If deviations from the status table arise then you are given the option of adjusting the status table.                                         
I have 2 questions:
1) What is BW doing, mainly because I'm working on an ODS and not an Infocube?
2) What can I do to reduce its execution time, since it lasts several minutes?
Thanks and greetings.
Roberto

Roberto, did you ever find an answer to your question?  We also are experiencing long runtimes during this particular process running 3.x deltas from ODS to ODS and cubes.

Similar Messages

  • Status control table - 'Perform update for status control table for cube '

    Hello Experts,
    While loading data to DSO, I am getting this message - 'Perform update for status control table for cube Z3MLQUA'.
    What is status control table ? and can I have some inputs as to how to solve this issue
    Regards,
    arjun

    Hi,
    This message is not a issue in itself. It is just a SAP message which means that the system is checking/updating the system tables to carry out the operation whether it can be done or not.
    If your loads are failing at this step or after this message there can be many reasons, check some of  the possible reasons below
    Performing check and potential update for status control table
    Update from PSA error in Process Chain
    problem in deleting request
    Reporting not available ,even if Data is sucessfully loaded into DT
    Hope this helps,
    Kush kashyap

  • Performance check for status control table

    Hi,
    When ever we activate any ODS or delete the request ,a message 'Performance Check for Status control Table ' appears.
    What does it mean?Please explain what is status control table and how it performs?
    Thanks & Regards,
    Dinakar.

    Hi,
    This message is not a issue in itself. It is just a SAP message which means that the system is checking/updating the system tables to carry out the operation whether it can be done or not.
    If your loads are failing at this step or after this message there can be many reasons, check some of  the possible reasons below
    Performing check and potential update for status control table
    Update from PSA error in Process Chain
    problem in deleting request
    Reporting not available ,even if Data is sucessfully loaded into DT
    Hope this helps,
    Kush kashyap

  • Performance Assessment - "Performance and Potential Update in TMC" for VC

    Hi All,
    I am interested in using the "Performance and Potential Update in TMC" enhancement follow-up processing on a Performance Assessment form for a VC object rather than the VA object. I have always got this to work for the VA but so far not for VC. WE put a debugger on BAdI HRHAP00_FOLLOW_UP but it appears this only gets called when you use Follow-Up from the Appraisal Documents menu in PHAP_ADMIN if your Final Appraisal and Progress Potential are not in the VA object.
    Any advice much appreciated!
    Kind regards,
    Luke

    SAP have informed us that the Follow-up BAdI requires a new implementation to specify the VC object.

  • Can not update iTunes because I have iMac with 10.5.8 . How I will sync my iphone 6.0 with an older version of iTunes on my iMac???? There is no update for the software of my iMac and no update for the iTunes.... So how can I sync????

    Can not update iTunes because I have iMac with 10.5.8 . How I will sync my iphone 6.0 with an older version of iTunes on my iMac???? There is no update for the software of my iMac and no update for the iTunes.... So how can I sync????

    Requirements for iPhone 5:
    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.6.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    iTunes 10.7 or later
    The highest version of iTunes you can install is 10.6.3 which will not sync with the iPhone 5.
    Roger Wilmut1 wrote:
    It's always a good idea to check the requirements before purchasing.
    The person I spoke with at 1-800-MY-APPLE gave me totally different info...she said the iPhone 5 would in fact sync with the older version of iTunes and that I could restore from my previous iPhone 4 backup and also bring in my music that way.  Hmmm....
    I'm inclined to go by the published specs, but now I have to jump thru a bunch of hoops I wasn't expecting to.

  • "A security and stability update for FF has bee n dnlded & is ready 2 B installed" Update: FF 37.0.2 but 37.0.1 is most recent. What to do????

    Rcvd a Firefox "Software Update" which said: "A security and stability update for FF has been downloaded & is ready to be installed" Update: FF 37.0.2
    Message has the option to restart now or later. I'm on ver 37.0.1 and FF says it is the MOST RECENT! Is this safe (from Mozilla) or a Scam/Phishing attempt? What to do????

    There is a 37.0.2 that came out recently. If you don't trust the installation prompt, cancel it. You can check using the Help menu, About Firefox. Either:
    * "3-bar" menu button > "?" button > About Firefox
    * (menu bar) Help > About Firefox

  • HT4623 I'm trying to update my iPhone 5 to IOS 7 through iTunes. I get a pop up saying I need to update my iTunes to  11.0.5 before I can update my iPhone. The problem is my iTunes is current, and no update for iTunes is found. Any one have any suggestion

    I'm trying to update my iPhone 5 to IOS 7 through iTunes. I get a pop up saying I need to update my iTunes to  11.0.5 before I can update my iPhone. The problem is my iTunes is current, and no update for iTunes is found. Any one have any suggestions?

    I had the same problem. My phone wasn't finding it so I tried plugging it into my laptop and it said I needed the latest iTunes which I already had.... I unplugged my phone from my laptop and did a soft reset to my phone (hold down the lock button and home button at the same time until your phone turns off) once it turns back on you should find the update... Click general... Software update. Worked for me!

  • Resumable downloads and delta updates for App Store

    Hi all,
    since I didn't find any place where to add product improvement suggestions, I post it here and hopefully someone can point me (and or this post) to the correct location.
    I'd like to vote for resumable downloads (even a shutdown is in between) and delta updates for the Mac App Store. The main reason for this are big apps (i. e. Xcode) which I simply can't update without having the mac running the whole day (and night).
    Thanks and regards,
    Michael

    Hi Michael!
    Apple employees are not going to see feature feedback posted here, but you can use the Apple Feedbck site. There is not currently a category for the App Store but you can use the OSX feedback form here:
    http://www.apple.com/feedback/macosx.html
    The main reason for this are big apps (i. e. Xcode) which I simply can't update without having the mac running the whole day (and night).
    Curious, are you on dial-up or satellite? As I live in a low-population state with lots of miles between towns of even modest size, I hear the slow connection issue a lot when helping users locally. We get 50mbps service in Lewiston, but people in the back country are struggling with some really slow satellite providers.

  • Just downloaded latest update and saw updates for fingerprint scanners. Do I have a fingerprint scanner or where do I get one?

    Just downloaded latest update and saw updates for fingerprint scanners. Do I have a fingerprint scanner or where do I get one?

    If you have an I phone 5s you have a scanner.  It does not exist on any other device at this point, and cannot be added.

  • I just recently installed mountain lion and an update for SMC firmware to install power nap. Everything is working except for the menu bar, the icons native to the system do not respond, and features like the clock and battery meter freeze.

    I just recently installed mountain lion and an update for SMC firmware to install power nap. Everything is working except for the menu bar, the icons native to the system do not respond, and features like the clock and battery meter freeze.
    When I mouse over the icons, the rainbow appears as if it was processing something. The problem is eliminated when I restart my computer but it comes back after a while.
    I guess I cant make a backup copy and restore the whole disk because the copy would be made with this error.
    Can anyone help me? Anyone with the same issue?

    Update: I was able to test out the HDMI adapter as well and the same issue occured.  I'm stumped.  10.8.1 maybe.

  • Software and firmware updates for the Zen Vision M 30 gb.

    On the Creative support homepage I can find the software and firmware updates for the Zen Vision M 60 gb, however, there is nothing listed for the 30 gb unit. Where can I find the software and firmware updates (downloads) for the 30 gb unit's

    http://support.creative.com/Products...me=MP3+Players

  • Creation of a generic extractor and data source for the FAGLFLEXA table

    Hi All,
    Need to create a generic extractor and data source for the FAGLFLEXA table to support AR reporting. This table contains the necessary profit center information to perform LOB reporting against the AR data.
    Please advice on how to do this.
    Regards, Vishal

    Hi Vishal,
    Its seems a simple a work out.
    1.Go to RSO2 & choose the relevant option ie. whether you want to create Transactional DS, Master Data DS or Text DS.
    2. Name it accordingly & then create.
    3. Give description to it & then give table name FAGLFLEXA.
    4. Save it & activate. If you need it to be delta enabled then click over Delta & you can choose accordingly.
    If you still face some problem then do mail me at [email protected]
    Assign points if helpful
    Regards,
    Himanshu

  • How to find unsued Transfer Rules and Data Sources for a Master Table...??

    How to find unsued Transfer Rules and Data Sources for a Master Table...?? My requirement is i need to delete those Transfer rules and Data Sources which are not in use

    Hi
    Go to manage of the Text or attirbute of the master data object, see what are being loaded daily from there and delete the remaining.
    Cheer
    Ans as expected, Please reward

  • Microsoft and Adobe Updates for June

    Microsoft Updates
    These updates are rated CRITICAL:
    MS14-035 Cumulative Security Update for Internet Explorer (2969262)
    MS14-036 Vulnerabilities in Microsoft Graphics Component Could Allow Remote Code Execution (2967487)
    ==================================================​=======
    These updates are rated IMPORTANT:
    MS14-030 Vulnerability in Remote Desktop Could Allow Tampering (2969259)                   
    MS14-031 Vulnerability in TCP Protocol Could Allow Denial of Service (2962478)
    MS14-032 Vulnerability in Microsoft Lync Server Could Allow Information Disclosure (2969258)                   
    MS14-033 Vulnerability in Microsoft XML Core Services Could Allow Information Disclosure (2966061)                   
    MS14-034 Vulnerability in Microsoft Word Could Allow Remote Code Execution (2969261)                   
    Malicious Software Removal Tool (MSRT, MRT) for June, Version 5.13 
    http://www.microsoft.com/en-us/download/malicious-​software-removal-tool-details.aspx
    ==============================================
    Adobe Updates
    Adobe Flash Player 14 has been released (14.0.0.125).
    These updates address vulnerabilities that could potentially allow an attacker to take control of the affected system.
     * Users of IE10/11 on Win8/8.1 will receive their Flash updates directly from Microsoft.
    These updates address vulnerabilities that could potentially allow an attacker to take control of the affected system.
    Direct downloads for Windows 7 and earlier:
    Internet Explorer - http://download.macromedia.com/get/flashplayer/cur​rent/licensing/win/install_flash_player_14_active_​...
    Plugin-based browsers (Firefox etc) - http://download.macromedia.com/get/flashplayer/cur​rent/licensing/win/install_flash_player_14_plugin.​...
    Info:  http://helpx.adobe.com/security/products/flash-pla​yer/apsb14-16.html
    Adobe Air 14.0.0.110 http://get.adobe.com/air/
    ThinkPad: T530 / X1 Gen 2 / Helix - Yoga: Tablet 2 Pro (Win) / Yoga 3 Pro
    If you find a post helpful and it answers your question, please click the "Accept As Solution" button.
    Lenovo Advocate ~ I am not employed by Lenovo or Microsoft. I am a volunteer.
    Microsoft MVP - Consumer Security
    SpywareHammer

    Silly me, I check for updates daily, and install all of them as soon as they appear.
    The KB3035583 appeared for me, on the following Lenovo systems:
    System                  OS                Type                    Date       Result
    X1 Carbon Gen 2, Win 8.1,         Optional,             3/30/15,  Successful Install, No problems noted.
    A520,                     Win 8.1,         Optional,             4/1/15,    Successful Install, No problems noted.
    Y470,                     Win 7 SP1,    Recommended,  4/4/15,    Successful Install, No problems noted.
    Did you happen to read this "take" on the update? (From the ESET Forum)
     https://forum.eset.com/topic/4581-kb3035583-windows-update-is-an-adwarepuapuspup-for-windows-10-upgr...
    Hope this helps.
    Cheers
    DragonRider
    I'm DO'ing IT
    Lenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )
    IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )
    YOGA Tablet 2 Pro-1380F
    X1 Carbon 2nd Gen (20A8) ThinkPad + T420

  • Need Update For Southbridge Control For PM8M-V

    Hello Ruudt, Michael, Leon & Warner ,
    Most Welcome To This Forum !!! I Think You Can Play Best  Contribution in This Forum .
    - I Have A Motherboard Model- PM8M-V (MS-7104 Ver: 1.00) . Bios Version : 2.4B3 (Just Updated- 10/07/2009) . This Mainboard Chipsets are VT8237 + P4M800 . It has Two SATA Ports . But The SATA Ports are Controlled By Southbridge . So, SATA Ports are Not Detecting SATA2(3.0 GB/S) Hard Drive or Device . It Is Only Detecting SATA1 (1.5 GB/S) Hard Drive . At This Moment -
    I am Expecting From You an Updater of SouthBridge Controll For This Model, So that- My SATA Can Detect SATA2 Device .
    - Thanks
    - Night Eagle

    Hello Night Eagle,
    the PM8M-V has a VIA VT8237R Southbridge.  This chipset natively only supports SATA I.  It is impossible to add SATA II Support unless you change the whole chipset.  And that is something nobody will (or can) do for you.  The lack of SATA II Support is a hardware/chipset limitation, not a BIOS/Firmware question.  You cannot add support for something on the BIOS Level which is not there in the first place.
    Let's face it:  Your board is rather  outdated.  If you want to use SATA II drives with it, you have to force the hard drives into SATA I compatibility mode (check for jumpers on the hard drives and if there are none, go to the manufacturer's site and download the proper service tool to access the firmware switches).
    There is nothing else that can be done about this.
    Quote
    I am Expecting From You an Updater of SouthBridge Controll For This Model, So that- My SATA Can Detect SATA2 Device .
    Not possible.   

Maybe you are looking for