Perhaps a missing driver from SCCM pack for x230 (2325)

We used the Lenovo tool to import W7 x64 drivers for the 2325 model into MDT.
When connecting a test laptop after deployment to a large external monitor (by VGA), nothing would display on the external monitor and Fn F7 only resulted in a black screen.
It was resolved by getting the latest video driver from the 2325 support page (g1d625ww.exe)
At this point, I'll try to find a way to get that driver into MDT individually, but long term, it might be missing from the SCCM pack? (which we had gotten from here http://support.lenovo.com/en_US/downloads/detail.p​age?&DocID=DS034785)
If there's any other detail I can provide, just ask!
(I'm new to this, so what I'm suggesting could be entirely wrong)

I believe you may have used the wrong SCCM Driver pack.  The link you provided list the pack for the X230s and the machine type you have is an X230.  The X230 driver pack is here:  http://support.lenovo.com/en_US/downloads/detail.p​age?&DocID=DS030230
It contains the prior version of the driver you mentioned - g1d622ww instead of g1d625ww.  The X230s uses a different driver - g1d652ww.  Perhaps that would account for the issue you encountered.  
If you would like to manage interim driver releases with MDT (since the SCCM Driver Packs are only refreshed when we refresh our manufacturing preload images) it might be easier to use Update Retriever.  It will let you find drivers by specifying the machine type and OS you are using.  You can select and download drivers to a local repository.  Then you can select drivers to Export to a folder.  You can then use the driver import wizard of MDT to import the driver(s) from that folder.  It will handle picking up the INF files and other required files and adding them to the folder you initiate the import from.  Then you just have to make sure that folder is included in the selection profiles for your deployment.

Similar Messages

  • Out of Date NIC driver in SCCM Pack for T440s

    win7 32 bit T440s
    Driver version 12.8.33.9427 seems to be included in the sccm pack, but the consumer download page has version 12.11.77.1
    http://support.lenovo.com/en_US/downloads/detail.p​age?DocID=DS035977
    The driver in the pack seems to have an issue where the NIC doesnt resume its connection after the laptop comes out of sleep unless you uncheck the "Allow the computer to turn off this device to save power" box in the nic properties.

    We are in the process of doing a refresh of these SCCM driver packs.  They are targeted to be avialable around the middle of August.  The newer Intel NIC driver should be included in the new packs that are coming.

  • Upgrading my intel iMac to internal SSD and running 1TB external drive from firewire 800 for mass storage while still using a second external drive for backups...my goal-speed with a SSD, to still have 1TB of room for everything i have now..possible?

    I seem to kill HD's every two years...the last two i've installed were WD Caviar Black 1TB 7200rpm 3.5" drives. The speed gains over  stock drives have been remarkable. I don't blame the drives for the failures, my machines are up and running 16 hours a day, every day, year round. They die from 'mileage' so to speak...i assume...there's no viral acvtivity or questionable downloads to gunk things up...just lots of work.
    I have my third new drive ready to install in my intel based iMac...but i've had a thought...I want to install a SSD in my iMac for the speed gain (and recent price drops)...for standard storage i want to use this new WD Caviar Black 1TB in an external drive bay and connect via firewire 800 for storing everything except the OS and my most commonly used software...am i crazy? will the firewire 800 external drive negate the speed gained with an internal SSD??
    I have four iMacs in my office, and one at home. I buy second hand and install new drives and boost memory. I'm going to do this on my 'home' machine...if it works out well i want to upgrade the other three this way...but first i need to know if i'm just dreaming, or will it really make a difference? or even possible??
    Thanks!
    2.66 intell core2duo
    2009 iMac
    8gig ram
    1 gig hd
    OSX ver. 10.8

    The SSD gives great bootup and Application launch speed. I think it also speeds up the video rendering a bit, I do all that on the SSD and then move the finished project to the external drives. As far as the speed for the external drives they are quick enough for viewing video and the file transfer rate is good. I had initially put the SSD into an external cradle (FW800) and the system was faster than on the internal drive. I only got a 1.5GBs SATA drive, perhaps yours could benefit from the 3GBs. I know the 6GBs would be too fast and costs a lot more, even the MacPros need special hookups to make use of the 6GBs.

  • Downloaded HP driver from their site for my laserjet, but it states this OS will not accept anything below 10.6 version

    I just downloaded the HP laserjet driver from their website and received an error stating my OS Yosemite system will not accept any driver version at or below 10.6.  Is their a driver within the Apple site that I can use or do I have to go back to my older OS version?
    Thanks.

    What is the version of the driver you downloaded?
    Which printer?
    Apple menu > App store and click Updates.
    See this -> OS X Yosemite: Add or remove a printer

  • Cloneing hard drive from intel machine for Powerbook g4

    I have a powerbook as well as 2 macbook pros. The hard drive in the powerbook crashed and I can't find my startup disks for the powerbook g4. If I clone the one of the mackbook pro HD's, will it work in the powerbook chip set?
    Don't need it for the programs, just the OS.
    If not, how can I get startup disks for the powerbook?
    Thanks
    Phil

    This is what I did. Took a PATA HD that I had with a firewire external connection. Did a complete erase using MAC OS Extended (journaled) format.
    Used Carbon Copy to make a bootable copy. Put it back in the Powerbook g4 and booted it up.
    Worked like a charm and is still working great.
    Maybe someone who did it before did it diffent and it did not work. But mine is working like a charm and my daughter is thrilled.

  • SCCM Driver Packs for Windows 8

    We have several SCCM driver packs for Windows 8 available now...
    ThinkPad L430, L530
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_l430-l530_w832_201210.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_l430-l530_w832_201210.exe
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_l430-l530_w864_201210.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_l430-l530_w864_201210.exe
    ThinkPad T430(s,i), T530(i), W530
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_t430x-t530x-w530x_w832_201210.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_t430x-t530x-w530x_w832_201210.exe
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_t430x-t530x-w530x_w864_201210.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_t430x-t530x-w530x_w864_201210.exe
    ThinkPad X1 Carbon
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x1carbon_w832_201210.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x1carbon_w832_201210.exe
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x1carbon_w864_201210.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x1carbon_w864_201210.exe
    ThinkPad X131e
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x131e_w832_201210.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x131e_w832_201210.exe
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x131e_w864_201210.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x131e_w864_201210.exe

    Adding X230
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x230x_tablet_w832_201210.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x230x_tablet_w832_201210.exe
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x230x_tablet_w864_201210.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x230x_tablet_w864_201210.exe

  • I can't seem to remove a driver from a driver pack

    As weird as it may sound this is what happens to me.
    I use Config Mgr 2012, SP1.
    I'm currently OSD'ing 6-7 different type of machines, one of those is the Lenovo T520.
    I went to Lenovos site and picked up their drivers for this model for Windows 7 x64.
    It aborted though during the task sequence, after downloading and applying windows, halfway through installing the driver pack
    that I assigned for the model.
    Error:
    Windowsfailed to start.
    A recenthardwareofsoftwarechangemightbethecause.
    File:ifM63x64.sys
    Status:0xc0000098
    Info:Windowsfailed to loada requiredfileBecauseis missingor corrupt.
    a bit of googling told me that several other people have had issues with this driver..
    "Intel Ethernet FCoE Virtual Storport Miniport Driver Version 1.14.12.0"
    The sites I checked seemed to have 100% succes rate by simply removing this specific driver from the package.
    They also stated its not an essential driver.
    So I completely deleted the driver from config mgr, and of course updated my driver package to the distribution point.
    Then got the same error during task sequence
    Thought that was pretty weird, to get an error on a driver that was now supposedly non existent..
    So I googled some more and saw that some had issues with the driver pack did not actually update even though it said it did.
    they fixed this by completely removing it and making a new one.
    So I did the following:
    1: Deleted the driver Pack
    2: Went to the directory and made sure the driver pack had no files left on the server.
    3: I created a brand new Driver Pack, I added all the drivers, without the previously deleted 'FCoE Virtual Storport miniport Driver'
    4: I make sure the task sequence uses the correct new Driver Pack
    And I still get the error. This is where I'm lost.. why am I still getting this error? the driver doesn't exist in SCCM anymore, and I even made a new package
               

    How about this:
    Delete the driver package and delete the folder that got created during the creating the driver package
    Re-import the drivers for the model, make sure the FCoE driver isn't included in the source
    Re-create driver package, distribute it to DPs
    Apply Driver Package -step in TS, make sure it uses the new package and it's filtered with WMI (SELECT * FROM Win32_ComputerSystem WHERE Model LIKE '%TS520%' or something that works...)

  • Read this for CD/DVD Drive with burning, missing drives, not seeing discs

    Seeing lots of the same posts with the same solutions being applied (mostly upper/lower control filters/MS Fixit)... so I thought I'd put this up for everyone.
    *Update* If this helps, please click the kudos to the right as I'm trying to gauge how effective this is. If you have the time to help the community, please reply stating what did or did not work.
    There are some helpful HP support articles that you may want to try before posting:
    If your drive cannot burn discs... or you can burn CDs but not DVDs (or vise/versa)... read this...
    Drive Cannot Write to Writable Discs (Windows 7)
    Drive Cannot Write to Writable Discs (Windows Vista)
    Drive Cannot Write to Writable Discs (Windows 98, ME, XP)
    Summary:
    1) Try different discs! Cheap discs can be hit or miss. Find a disc brand and type that works best.
    2) Try burning at a slower speed (not the best option, but can often get the job done if the laser is fading).
    3) Remove drive from Device Manager and remove upper/lower filters (see below).
    4) Use MS System Restore to go back to a time when it was working.
    5) Use PC-Doctor/HP Hardware Diagnostic software to check for a bad drive.
    6) If the drive is not bad - save your files and use HP Recovery to put the system back to the beginning.
    If your drive cannot read discs; CDs or DVDs or both...
    Drive Cannot Read Discs in Windows 7
    Drive Cannot Read Discs in Windows Vista
    Drive Cannot Read Discs in Windows 98, ME, and XP  
    Summary:
    {restart the PC at least once to see if the drive shows up on boot}
    1) See if the drive is listed in Device Manager (look for problems if it is).
    2) Check autoplay (skip if you don't use).
    3) Make sure a bad disc isn't knocking out the drive (an operating system mounts discs as drives and things can get screwed up).
    4) Try reading the disc from a command prompt environment (outside of Windows).
    5) Reinstall drive from Device Manager (if drive is listed). {I'd replace this with bigger process of remove upper/lower filters (see below)}.
    6) Use MS System Restore to go back to a time when it was working.
    7) Use PC-Doctor/HP Hardware Diagnostic software to check for a bad drive.
    CD/DVD drive is missing (not in Windows Explorer or My Computer or in burning software)...
    CD/DVD Drive is not Detected (Windows 7)
    CD/DVD Drive is not Detected (Windows Vista)
    CD or DVD Drive is not Detected (Windows 98, ME, or XP)
    Summary:
    1) See if the drive is listed in Device Manager (troubleshoot based on what you see).
    2) Reset Power: Unplug power cord, press Power button for 10 seconds.
    3) Check power and data cables attached to the drive and look in the BIOS for the drive name.
    4) Remove upper/lower filters (see below).
    5) Reinstall burning software
    6) Get and CD/DVD drive firmware updates if available (to prevent missing drives in the future (I assume)).
    7)  Use MS System Restore to go back to a time when it was working.
    Stuck Drawer...
    Opening a Stuck CD or DVD Drive Tray
    Summary:
    1) Press eject button on case, on drive, button on keyboard (if exists).
    2) Right-click drive icon in Windows and select Eject.
    3) Turn off PC and inert a straightened paper clip into the manual release hole on the drive.
    4) Check the power cord on the back of the drive.
    MS FIXit, Resetting Upper and lower Filters (XP, Vista and 7)
    First... try to use the MS Fixit (for Vista) if you are on the computer having the problem)...
    Microsoft Fix it Solution
    Otherwise, here are the manual steps (overview):
    1) Uninstall the CD/DVD drive in Device Manager and DO NOT RESTART the computer. 
    2) Uninstall your CD burning software (make sure you have the installation disc or you can resinstall from Start, Programs, PC Help and Tools, Recovery Manager (or Driver/Application Recovery). If you don't have the installation discs, skip this step - it might still work).
    3) Open the registry editor (Start -> Run -> enter Regedit) ... might want to make a backup of the registry at this point.
    4) Open the following keys:
     + HKEY_LOCAL_MACHINE
     + SYSTEM
     + CurrentControlSet (or the current control set with lowest number if that is all that is listed)
     + Control
     + Class
    5) Select 4D36E965-E325-11CE-BFC1-08002BE10318. It has to be this exact key - make sure you can see the last numbers!!!
    6) Delete the UpperFilter and or the LowerFilters value in the right window if either exists.
    7) RESTART the computer - this step is important. Wait for Windows to find and install the CD/DVD drive you removed earlier.
    8) Reinstall your burning software and restart the computer again.
    Message Edited by GarenT on 10-07-2009 06:32 PM
    Message Edited by RasterBlaster on 11-30-2009 03:51 PM
    ... an HP employee expressing his own opinion.
    Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

    That's why you want to make a backup of the registry. If you didn't make a backup, use MS system restore to go back. The only values you should remove are UpperFilter or LowerFilter - one or both may be in there and can be removed. If neither value exists, then that is probably why you can't burn and Windows is not recognizing your drive as a writable drive.
    ... an HP employee expressing his own opinion.
    Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

  • T410, T420 driver pack for MDT deployment

    Is there a page where I can get the MDT driver pack for the T410 and T420 models?  The current page (http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=SCCM-INDEX) Does not have drivers for the anything older than a T430.
    Solved!
    Go to Solution.

    Hi BDS_Vince, welcome to the forums,
    Lenovo's first SCCM packs were first released for the T430 and other Think systems current at that time, please see following linked to thread;
    http://forums.lenovo.com/t5/Enterprise-Management-IT/Introducing-ThinkPad-Driver-Packs-for-SCCM/m-p/...
    As suggested on page 2 of that thread you could maybe use Update Retriever as an alternative method to manage drivers for older systems.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Driver Packs for XP - T430

    Afternoon All,
    Just taken delivery of a T430 eval unit which I am using to build an image via SCCM OSD.
    Question - to save me hours of work do Lenovo produce XP driver packs for this model? Unable to find them using a search or browsing.
    Solved!
    Go to Solution.

    Lenovo does not provide driver packs for XP. 
    You can save yourself a lot of time and effort by using Update Retriever however.  With UR you can give it the machine type of your T430 (the first four numbers of the product number) and it will find the available drivers without you having to search through our web site.  Then you can select just the hardware drivers to download.  Once downloaded you can export the hardware driver to a speciifed folder that your SCCM console has access to.  Then you can use the Driver Import wizard to import the drivers.

  • How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet.  I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7

    How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet.  I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7.  HP computer intel Dual Core.  Thanks for any help!

    Hey idw3,
    Welcome to Apple Support Communities, and thanks for the question. Follow the instructions on this article to move your iTunes Media folder to an external hard drive:
    iTunes for Windows: Moving your iTunes Media folder
    http://support.apple.com/kb/HT1364
    Regards,
    David

  • I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go.

    I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.

    Hold down the option key and select
     ▹ System Information...
    from the menu bar. In the window that opens, select
    Hardware ▹ USB
    from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown?

  • I just bought a MBA and I need to move my photos and itunes to an external hard drive (from my old MacBook Pro) because they won't fit on the Air.  I got the photos moved fine and I followed an online tutorial to move the necessary files for itunes, but i

    I just bought a MBA and I need to move my photos and itunes to an external hard drive (from my old MacBook Pro) because they won't fit on the Air.  I got the photos moved fine and I followed an online tutorial to move the necessary files for itunes, but it didn't work.  The files copied fine, but when I tell iTunes on the Air to look at the external drive for the library, it doesn't find anything.  What I copied was the entire iTunes Media folder.  So, how do I move the necessary iTunes files from my old Pro to a external drive so I can access them from my new Air?  Whew!

    iTunes- How to move the library to an EHD
    After you move the library you need to open iTunes by first depressing the OPTION key then launching iTunes. You will be given a choice of which library to use. This can then be made a permanent change, if you wish, in the Advanced section of iTunes preferences.

  • Will Mac allow you to boot from an external drive...specifically for windows programs?

    Will a new Mac allow you to boot from an external drive...specifically for windows programs?

    ps...I've read the threads on Bootcamp.

  • Can i hook a external hard drive to the tc usb port and fire wire from the computer for faster movie transfer ?

    Will i be able to hook a WD 3tb external hard drive via the TC USB port for network storage as well as a direct firewire to the same WD 3TB external hard drive for faster transfer of home movie for storage?

    In general, no.  I do know of any drives that support simultaneous use of the USB and Firewire ports.  (Or eSATA, if equiped.)  I have several USB/FW drives from Seagate, Western Digital, Iomega and others that I used my own hard drive and none allow this.

Maybe you are looking for