Perhaps a visualizer for iPad when playing music?

I just updated to the latest version of iTunes and must say I am very impressed with the new visualizer. However I can't seem to find one on the iPad. Does anyone know of a way to get a visualizer for iPad? Or is one stuck with a still picture during playback?

Just realised this happens without earphones and without using the running app. My iphone will only play 2 songs when I select shuffle in any playlist, driving me mad!

Similar Messages

Downloaded new format yesterday and now when playing music the sound is low for first few seconds of each subsequent track. Is this a bug?

Under new format when playing music each track after the first starts in low volume then kicks in within 3 seconds. very irritating. is this a bug?

I'm having the same issue on my iPad (the "new iPad" / 3rd gen with retina display and 30 pin dock connector) after downloading iOS 7 (is that what you meant by the new format, updating to iOS 7?).
The music will play quietly for a few seconds then it will play at the volume it's supposed to.

My ipad will play music but no sound for games?

My ipad will play music but no sound comes out for games?

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Can anyone please advise me how to solve while music pauses by itself when playing music on i tunes

can anyone please advise me how to solve while music pauses by itself for few seconds randomly when playing music on i tunes. Already tried playing in safe mode and using a different user account the problrm still exist. i am using mountain lion and i tunes 11

How to use multiple iPods, iPads, or iPhones with one computer

HT1414 touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod

touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod, can anyone help or what is the cause

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

The sound on my iPhone 4S cuts out when playing music/podcasts.

The sound on my iPhone 4S cuts out when playing music/podcasts. If I unplug and replug in the headphones, the sound comes back on, but often for only 20 seconds or so before cutting out again. Sometimes it will play for 15-20minutes before cutting out. The track is not "paused", and appears to continue, just no sound. I tried cleaning the headphone jack with compressed air to no avail. I also noticed the the same phenomenon occurs when I sync my bluetooth to my car audio. That is, it will play for a while, then the sound will cut out, even though the track is still shown to be playing. If I reset the bluetooth, the sound comes back on.
This started happening about a week ago, but no "event" that I can think of caused it. I didnt' get the phone wet, forcefully drop it, or leave it in extreme heat. I've tried doing a reset of the phone. I also was running iOS5 when I first noticed this, and since upgraded to iOS6. The problem appeared with both.
Any help would be greatly appreciated.
Thanks,
Steve

One thing that helped was getting a toothbrush and scrubbing the dock connector on the phone. I scrubbed the connector and used compressed air for about 1/2 hour till the connector looked much cleaner. An Apple employee told me that the pins on the phone had a little corrosion and sand. The problem hasn't gone away completely, but has been significantly reduced. I'm going to hold out until my contract expires after which time I'll switch to an iPhone5 (or newer) or Android phone.

Pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 via blutooth (firmware prob) to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all

pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.

Dear Valued Pioneer Customer:
We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device. If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
This firmware update may be used only with the following 2012 Pioneer products:
CD Receivers
DVD Receivers
DEH-P8400BH
DEH-P9400BH
DEH-80PRS
AVH-P2400BT
AVH-P3400BH
AVH-P4400BH
AVH-P8400BH
In order to perform this update, the following items are needed:
A Pioneer CD or DVD Receiver above with built-in Bluetooth
Laptop with built-in Bluetooth running Windows® 7
Bluetooth firmware update (HW05-SW01.27.20)
How to Obtain the Free Firmware Update
1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
How to Determine if the Firware Update has Already been Installed
CD Receivers:
• With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
DVD Receivers:
• With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
Questions
If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
Sincerely,
Pioneer Electronics (USA) Inc.

The off button does not switch to 'hibernate' or lock when playing music.

The off button does not switch to 'hibernate' or lock when playing music. I have to hold the off button down
for a prolonged period of time to get it to switch off; have had to resort to holding the off button and the main
button simultaneously to reset but no improvement.

- First try restoring the iPod from backup via iTunes.
- If problem persists, restore to factory defaults/new iPod.
- If still a problem than you likely have a hardware problem and an appointment a the Genius Bar of an Apple store is in order.

How to get blank TV screen when playing music

I am using Apple TV to stream my iTunes music to my television.
What setting do I need to make my television screen completely blank when playing music?
Thanks

Grahamfff wrote:
Hi - thought that might be the answer!
Sadly, I cant connect the ATV optically, as my amp doesn't have an input, nor does the ATV have phono output, unfortunately.
Thanks for your reply
That was an advantage of ATV1 - analogue audio out (and component video, and the hard drive, and iTunes Extras/LP....I'll stop there ).
No reason trhey couldn;t potentially add as an option though:
http://www.apple.com/feedback/appletv.html

I have a new iphone6+ and have paired it to my 3 cars. When playing music from my iphone, the volume is very low and I have to turn the car volume to max to listen. I had no issues with previous iphone parings. Pls help.

I have a new iphone6+ and have paired it to my 3 cars. When playing music from my iphone, the volume is very low and I have to turn the car volume to max to listen. I had no issues with previous iphone parings. Pls help.

Sorry if this is too basic or confusing
Apparently in iOS 8 there are different volume settings for different applications
The setting on the home screen does not carry over to Pandora for example and it is different ( or at least appears to be) for the in-car experience.
So I would try to stream the music when not in the car - see if you can turn the volume up and then try again in the car
Please let us know what happens
Thanks

5530 XM Restart when playing music

my 5530 is XM Restarted when i trun the set when playing music please help me in this regard

Is the phone restarts only when playing music..? o
There is this issue on 5530xm wherein the phone restarts especially when answering a call or if phone locks up when you are loading some applications, then it restarts. We are still waiting for Nokia to post an update for this issue.
Nokia 5530 Xpress Music
v11.0.054
"How We Respond Is Who We Are..."

Creative Roar SR20A continuously prompts "TeraBass On/Off" When Playing Music While Charging

I have noticed that when playing music for a while (over an hour or so) on the Roar while charging causes the speaker to prompt "Tera Bass On" and "Tera Bass Off" continuously every one or two seconds. This continues till I switch off the charging and then its functions normally. I believe this happens once the unit gets fully charged. Has somebody faced this issue??? Is there a fix for it??? This is an annoying bug in the firmware.

Originally Posted by apratimsau
I have noticed that when playing music for a while (over an hour or so) on the Roar while charging causes the speaker to prompt "Tera Bass On" and "Tera Bass Off" continuously every one or two seconds. This continues till I switch off the charging and then its functions normally. I believe this happens once the unit gets fully charged. Has somebody faced this issue??? Is there a fix for it??? This is an annoying bug in the firmware.
Hi apratimsau,
It does not seem normal. Please contact our Support at the link.
Cheers,
JL-CL

Can smbody please tell me what to do to my iPhone 4s, when playing music or ringer, the sound will just stop without stop it.. I am really getting tired of this...

Can smbody please tell me what to do to my iPhone 4s, when playing music or ringer, the sound will just stop without stop it.. I am really getting tired of this...

After updating to iOS6, I lost all sound for apps like YouTube, Netflix, games, and even notifications. The only time sound worked was during a phone call or when the head set was plugged in.
I did a full back up and restore- sound restored but only for a day before the problem returned.
Called Apple Support and was advised to do another restore, but this time restore it as NEW first, then do the restore from back up.
Seemed to do the trick.
Here are the instructions of what I was given- hopefully this will help you too:
Here is a link about backing up your iPhone with iTunes.
http://support.apple.com/kb/HT1766?viewlocale=en_US
Once you back up your device you will want to restore it.
You will need to have iTunes open on your computer screen.
Please turn your iPhone off.
Press and hold the Home Button.
Continue to hold the Home Button as you plug you iPhone in to the usb cable.
You will want to continue to hold the Home button until you get a screen with the message "device found in recovery mode".
Please follow the prompts and restore device as NEW.
once the restore is done you will have to set up the device and test the sound.
If it works you will then need to restore the device from the back up to restore your user settings.
You can find the instructions how to restore from back up also from the the link I provided.

No sound when playing music iPhone 4s and not charging right on some chargers.

No sound when Playing music on iPhone 4s and issues charging on some chargers. This below worked for me - Thanks.
No sound only when playing music. 2013 11:05 PM. My wife had the same issue with her iPhone 4. The volume bar was grey inside the music app and the volume buttons on side of phone didn't work. Cleaned out the charging port using rubbing achoal and a Q-Tip.

Hi
I have the same problem. iPhone 4S with newest update. No sound while playing music (grey volume buttons). No sound for alerts e.g. incoming SMS.
Total reset does not help. Restore from iTunes Backup helps, but sound only available for some minutes (can play music direct form iPhone, without ear-phone)
Issues is still open. All contact cleaned (ear-phone etc.)
Please help.
With kind regards,
Swiss JFK

Hp stream 13 buzzing sound when playing music and watching videos/movies.

I recently bought my HP Stream 13 and everything was fine. Suddenly, whenever I watch or listen to music online and offline, I get this buzzing sound from my speaker. Even through my headphones and when I connect to a TV Monitor through HDMI. It's really gettting annoying. Please help.

Hi @21coldones ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Stream 13 buzzing sound when playing music. Have you restarted the Notebook without the headphones and external HDMI removed?
Here is a link to resolve headphone and speaker issues in Windows 8. Using the Microsoft troubleshooting tool to be the most helpful.
Please make sure your updates have been done on the Notebook. In the device manager under sound right click and update the driver. Here is another step to try.
1. Right click the Speaker icon in the bottom right corner by your time.
2. Click Playback Devices.
3. Click Speakers/Headphones.
4. Click Properties.
5. Click the Advanced tab on the Properties window.
6. Change the Default Format drop-down to the highest quality.
7. Apply the properties.
8. Click OK to close the properties window.
9. Click OK to close the Playback Devices.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase.
Hope this helps with the sound.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Perhaps a visualizer for iPad when playing music?

Similar Messages

Maybe you are looking for