Period to be evaluated 20110501 before earliest recalculation period 999912

Hi all,
I am busy doing some testing so hired an employee as at 01/05/2011. Now when I try and run Time evaluation for this employee I get the following error :
Period to be evaluated 20110501 before earliest recalculation period 999912
I am not sure how to sort this out ..............
Any help will be greatly appreciated.
Thanks
Mark

Did you check value in  field 'Earl.pers.rec.date' of the ee's IT0003 ?

Similar Messages

  • Payroll - Check for Previous Period which did not run before

    Hi all,
    I have an employee who was terminated hence payroll was not run for him from his poiint of termination, i.e. he was terminated from period 03, 04, 05 onwards.
    Now currently it is period 06,... I wish to run payroll for him, for his period 03, 04, 05, I need to be able to detect that I am running payroll for the 2 conditions:
    1) That the period i'm running FOR (03,04,05) is before the currnet period.
    2) And that for periods 03, 04, 05 I am running the payroll for this employee for the FIRST TIME.
    Are there any commands in the schema that I can use to know this?
    Regards,
    Kevin

    Hi Kevin
    When simulation or payroll is running for the employee at the bottom of the screen it tells you which period it is processing as payroll runs thru each pay period.
    The log when expanded also does the same. If an employee has not had pay run for 3 months prior it is still a retro. Also check info type 0003 see if the PDC recalc date has been set and this will tell you how far back pay will run, if pay has been run the pay results.
    if its the schema commands then print your paryoll schema to the screen and then expand and search for "retro", this will give you the retro commands or run program RPDASC00 and fill in the schema name etc.
    Rona

  • What is the earliest prior period that you would like to enter into SAP B1

    Can anyone please explain the need of gathering the following information in a BBP for SAP B1 2007B?
    "What is the earliest prior period that you would like to enter into SAP Business One to allow for Comparative Financial Statements?"

    If you want to be able to create year over year reports, create budgets based on history, etc. you can't just start with opening balances for your GL accounts. You need to create past periods and load history amounts. That's all.
    My clients typically want to be able to answer questions like 'How much higher (or lower) are sales this month than sales in the same month last year?' So for a client who 'went live' with SAP on January 1, 2009, I would create 12 periods for 2008 and enter their monthly balances for their GL accounts.

  • Posting Period to close and open the New Posting Period

    Hi,
    I am trying to do MIGO, it is not allowing to post in the current period.
    Pls let me know, How to close the current period (AUg) and Open the posting for Sep. Pls provide the steps.
    Thanks

    Thanks for the quick response,
    I did MMPV and Gave the company code and enter period as 08 and selected check and close period and executed. It gives the response as
    It gives period closing terminated
    Can you tell me what should i do
    thanks

  • In oneasset class i have created 2 assets by using of aso1 after that i acquired one asset for that i run the depreciation for first 5 periods, it has been showing depreciation for those period but if i am trying to run the depreciation for second asset i

    in on asset class i have created 2 assets by using of aso1 after that i acquired one asset for that i run the depreciation for first 5 periods, it has been showing depreciation for those period but if i am trying to run the depreciation for second asset it is not showing first 5 periods why it is not showing? Is there any reason?

    Hi
    Repeat run you can do only for the last depreciation period. For the asset which you are tryin to post depreciation from July to Jan, please check the asset value date which you have given while posting the transactions or in the asset master.
    If the asset value date is in July, then deprecaition from July - Jan will get posted in the current month depreciation in total. You will not be able to post depreciation individually month wise using AFAB.
    REgards
    Malathi

  • Periodic Alert scheduler not picking up 3 Check period Alerts out of 46

    Hi All,
    Please help me on this. It is rellay urgent.
    In production we have 46 period alerts on one username. Due to recent changes in organization that user transferred to other organization. Now I need to cancel all these jobs on his name and need to assign on my user account since I am the owner of the applicaitons now.
    I went to Periodic alert scheduler and deactivated the scheduler and activated again with today date. So now new request id came on periodic scheduler and all 43 jobs are showing scheduled on my user account . Even periodic scheduler also shwoing 'scheduled' on my user account . But some how only 3 alerts not picked up by scheduler.
    Only difference I found for those 3 Alerts are they have start time and end time. Can anybody let me know how to schedule these 3 alerts again. Why did n't scheduler picked up these 3 alets.
    Alert details:
    Frequency-evey n calender days,Days-1,start time :05:00:00, end time : 22:00:00,Check interval : 01:00:00
    I need the resoluciton asap . Appreciate your help and many thanks to looking into this issue.
    Thanks,
    SJP

    Hi,
    Please review these documents and see if it helps.
    Note: 2059482.7 - Set Information and make Sure Periodic Alert Scheduler is Running
    Note: 1016672.102 - Periodic Alert does not Run at Scheduled Time, Runs when Periodic Alert Scheduler Runs
    Note: 427965.1 - Periodic Alert Scheduled for On Day of the Month, Runs on Day Enabled
    Regards,
    Hussein

  • Xl reporter shows different result before and after Period-End Closing.

    Hi SAP experts,
    We have an issue with XL Reporter. When we ran Period-End closing and ran XL - PL Period & YTD (with the same parameters), XLR shows nil in the Actual YTD column and the monthly figures are out by a big difference (example pre-rollover it was $110K after rollover it shows negative $12M).
    This happens on 2 different clients running 2 different SAP B1 (2007A PL 42 and 8.8 PL 13) on the same XL Reporter which is possibly the default XL report that comes with the installation.
    I don't have any idea why the XLR is running 2 different figures altogether when running the same XLR using the same parameter before and after rolling the year over. The default SAP B1 P&L report stays the same before and after the rollover, I would have expect that the same would happen with the XLR.
    Please advise.
    Regards,
    Didy Arfiono

    Hi Julie,
    Thanks for the reply. I'm not entirely sure what you mean by excluding a certain transaction for closing entries as this would defeat the whole purpose of PEC which as you stated was to transfer P&L balances to retained earnings account to be carried forward.
    I've check at some guides including one from Orchestra Team (http://www.youtube.com/watch?v=e4tUo774eXg) and so far the process that I've done is exactly what it is.
    Regards,
    Didy

  • I downloaded all my photos on to photoshop cs5 trial period but the trial ended before I was ready can anyone help me to retrieve my photos

    I downloaded my photos onto photoshop cs5 for a trial but the trial period fininshed before I was ready. Can anyone help me to retrieve my lost photos.

    What are you talking about?
    Photoshop is not a "container" for images, those must have existed somewhere else. (With the exception of newly created unsaved images, but as you claimed you downloaded them this case does not seem to apply.)

  • HT203254 This does not work. Apple refused to repair my notebook though I applied for the the repair before 4-year period has expired. I am very frustrated with Apple and its quality and support.

    4-year period expired on 12-th of December.
    I have applied to an official Apple service on 4th of December with this problem with nvidia-8600 chip that was confirmed by the official Aplpe service.
    I have a document that confirms the purchase date.
    It was sent to Apple by the official service and they refused.
    What we have is that Apple does not respond to obligations and all it declares can be considered as lie.

    The details:
    Repair Confirmation Number: G141323406
    Serial Number: W8******YJX
    Reason for cancellation: Part is out of range, It does not qualify for quality program.
    <Edited By Host>

  • Modify view of Default timecard periods view in OTL to sort list of periods

    Hi,
    Can someone guide me if there is any way to modify default timecard periods view in OTL. We intend to sort the list of timecard periods in OTL in order to show old non sumbitted timecard periods as default rather than based on system date.
    I have checked preferences->System that allow edits but that is not helpful in what we want to achieve.
    Thanks,
    Rajan

    These are the tabs that are displayed and the ones it gives me options for.
    There are many improvements needed for Bridge and the default metadata workspace is certainly one of them. In fact, in its current state it is next to useless and no help at all. But you are right, it should provide you with at least the description field but it does not. Oddly enough, the only way to achieve this is using the bottom right icons in the Bridge window. You see three of them, thumbs, large thumb with list and small thumbs with list. Currently you have selected the default small thumbs with list, if you use the middle one (large thumbs with list) and fiddle around with the slider for the size of the thumbs the description field magically appears in view but you are not able to put it in a separate column.
    So the find option is still your best option I'm afraid...
    You can also try to create your own workspace. Start dragging the borders to change the size of the panels to your comfort so you have a good overview of the panels you want to have in view.
    You can also change the order and place of panels in multiple rows but you are limited to max three columns. Place the cursor on a panel tab and start dragging it to a new location. A single blue line means either between a row or a column, a surrounded blue line means add as a tab in same location. You also can drag the tabs for your custom order.
    Now with the content panel in reasonable size use the icon bottom right for large thumbs and list view and use the slider for correct position of the description field. Save it as a new workspace (important to retrieve it when messed up). You can also have multiple windows in Bridge (at least on a Mac, you seem to be on Windows) and use one for list view and another for find results. etc. etc.

  • How do I set up a periodic job to run only if the previous period job ran

    I want to sent up a process that will run on the second work day of the month that will run program A.  If program A runs successfully, then I want to run program B.  If B is successful, then program C.
    I tried to setup A to run on the second work day of the month using a calendar. 
    I then setup B to run after event A.
    I then setup C to run after event B.
    This all worked great the first month.  Now we are coming up on the second month, and A is still scheduled and will run on the second work day of this month, but B and C are no where to be found.
    I found various threads to use bp_event_raise and SM62, but I guess since I am not an ABAP programmer I did the program wrong.
    can someone please give me detailed instructions on how to set this up.

    Hi John,
    Create a process Chain with start variant sheduled using EVENT.
    1. Create a event in TCODE SM62. In the Event tab on the process chain give the event ID and a Parameter name.
    2. In SE38, create a program. call method RAISE of class CL_BATCH_EVENT. Give Event ID and Paramter name as given in Process chain variant.
    Coding will be like:
    if sy-datum+6(2) = '02'.
      CALL METHOD cl_batch_event=>raise
        EXPORTING
          i_eventid                      =
          i_eventparm                    =
         i_server                       =
         i_ignore_incorrect_server      = 'X'
       EXCEPTIONS
         excpt_raise_failed             = 1
         excpt_server_accepts_no_events = 2
         excpt_raise_forbidden          = 3
         excpt_unknown_event            = 4
         excpt_no_authority             = 5
         others                         = 6
      IF sy-subrc <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      endif.
    Schedule this program in background daily. when eve the date in '02' the event will be triggered.
    3. Place the process type "ABAP progam", maintain the variant as Program A.
    4.  Place the process type "ABAP progam", maintain the variant as Program B.
    5. Place the process type "ABAP progam", maintain the variant as Program C.
    Connect all this with tpye only on Success.
    This will ensure that program A will be executed on 2nd of every month. If success Program B and then Program C.
    -- Selva

  • Earliest retro calculation problem???

    Hi experts,
    In PT60, I am getting error 'Period to be evaluated 20090101 before earliest recalculation period 201001,
    I checked infotype 0003, Here Earl.Ret is set to 01.01.2009.
    I also checked control record,, it is set to 01.01.2005.
    I am not understanding why this error is coming.
    Please let me know where it is going wrong.
    Regards
    Ravi

    Hi Ravi,
    Check all the Validity period and Date related configuration.
    Regards
    Chandrashekar

  • Report RPTIME00 error

    Hi!
    I have an employee with infoset 0007:
    Start: 01.07.2011
    Time Mgmt status:  1-Time Evaluation of actual times
    The status infoset 0003 is in time evaluation section:
    Earl.pers.rec.date   01.07.2011   Pers.calendar from   01.01.2012
    PDC recalculation    01.07.2011
    When I run RPTIME00 for the employee with the params:
    Personnel Number: 00101698
    Time statement variant: SAP&TEDT
    Evaluation up to: 01.07.2011
    I get the next one log errors messages:
    Log: Time Evaluation
           General data
           Successful personnel numbers
           Personnel numbers with errors
           Personnel numbers ended early
               00101698 ANTONIO PEREZ
                   Start of pair formation changed from 20110630 to 20110701
                   Initialization 07/2011
                   01.07.2011 Friday
           Personnel Numbers Rejected
           Messages
               Personnel No.: 00101698
               Period to be evaluated 20110630 before earliest recalculation period 201107
           Statistics
               Selected personnel numbers                         1
               Successful runs for                                0
               including with errors                              0
               Processing not completed for                       1
               Rejected                                           0
               Total number of messages and error messages        2
    I think is trying evaluate 30.06.2011 but in the filter the day is: 01.07.2011 and if I change it by other day greater than 01.07.2011 I get the same error.
    How can I fix this error?
    Kind Regards,
    Julian.

    Hi!
    I paste part of the log
                   Start of pair formation changed from 20110630 to 20110701
                   Initialization 07/2011
                   01.07.2011 Friday
                   Final processing 07/2011
                       IF              EOM       If last day of period
                       ENDIF
           Personnel numbers with errors
           Personnel numbers ended early
           Personnel Numbers Rejected
           Messages
               Personnel No.: 00101698
               Period to be evaluated 20110630 before earliest recalculation period 201107
    Now it doesn't show error because I have copy and modify rules TE20, TE30 and I have changed the 'E' by 'I'.
    Kind regards,
    Julian.

  • Material master posting  initializing periods (MMPI)issue

    I am getting an error while intialiing periods (MMP).
    ERROR  before initializing fallow the instructions of note 487381.
    needs payable remote consulting help.How to solve this error?

    Hi Sridhar,
    For period closing with initialization, the system displays a message saying that period closing cannot be started.Before you start period closing with initialization, you must be aware of the consequences of period closing with initialization.This note describes the possible data inconsistencies that might occur if you carry out the initialization in a productive system.The resulting inconsistencies are not to be traced back to a system error but they are a result of the period closing program with initialization.
    Hence, these inconsistencies can only be corrected within the remote consulting purchased separately since normally you no longer need to start the period closing program with initialization in a release > Rel. 4. 5.
    regards
    kiran.

  • ICR Process 003 Month-End Cut-off

    We have implemented ICR process 003 in the 5.0 system.  It seems that "posting period" relates to the period that the document was posted in ICR not necessarily to the customer account.  How can we get a good month-end cut-off when new documents are posted all the time.  For instance, when we run FBICS3, FBICA3, and FBICR3 after the new period begins, it will pull in documents created in the new period and all still open before in previous periods.

    Hello Staci,
    The period and year you enter on the selection screen is combined with the fiscal year variant maintained in your process customizing to derive a key date for open item selection. The open items are then selected in the sender system and stored in the year and period specified on the selection screen in the ICR database. This is also explained in the first message that is displayed in the log of data selection.
    Best regards,
    Ralph

Maybe you are looking for

  • Need help with IDOC CREMAS_03 mapping

    i was not able to figure out what values to assign to the following mandatory fields. BEGIN EDI_DC40(node not mandatory) SEGMENT TABNAM DIRECT IDOCTYP MESTYP SNDPOR SNDPRT SNDPRN RCVPOR RCVPRN i am trying to map the following structure to the CREMAS_

  • Oracle Performance Issues

    Greetings listers, I've some performance metrics reported as critical on my system. Can you help me understand how to fix these issues? I've the performance tuning guide , which am going through. would like to know the experts comments here about the

  • About to become a father...

    My wife is going to have our baby tomorrow or Friday...She's going to be inducted so the birth is going to somehow advanced. So, I just wanted to share my happiness with all of you -:D You want pictures? You may need to wait for my "reporter" to get

  • CUP - Enterprise Portal Provisioning

    Hello 1. CUP can provision UME roles to Enterprise Portal using Webservices. The steps are provided in the GRC AC 5.3 configuration guide. 2. It has no mention of installing EPRTA (Enterprise Portal Real Time Agents) Is this required? Also is there a

  • TS4062 I am getting error msg when trying to sync-iPhone could not sync because the sync session failed

    I am trying to sync my iPhone and receiving the following message:  iPhone could not sync because the sync session failed I have tried walking through the set ups again, and cannot figure this out.  Any help out there?  Thank you.