Periodic automatic data connection (unwanted)

This sneaky little 5800 initiates a data connection automatically from time to time and upon startup. I cannot tell which program is communicating let alone whom with. It causes around 10KB of traffic on EDGE (I use the phone in GSM mode), and I can only see two running applications: Menu and Home.
I tried setting the GSM data profile to "Ask first" under Settings Connectivity Destinations, but it doesn't help.
I disabled AGPS.
I disabled Automatic checking for Application Updates.
What else can I try? Is there an diagnostic application that can tell me what programs are running? I mean a real list of running processes, not the shiny app selection bar.

You have a 5800. Did yo uinstall FreeTimeBox to make sure the clock stays in sync? That can be set to connect at startup to do just that.
Other common culprits are automatic e-mail retrieval and share online, neither of which show in the list of open applications.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

  • E71 hanging Data connection after automatic email ...

    Hello all,
    My E71 seems to suffer from hanging Data Packet Connection after automatic email retreival.
    So I configured my email IMAP4 retreival and set it to automatic retreival every 15 minutes.
    Then after a few hours I check my phone and there is a data connection open and active. If I check the connections it is open for a few hours, sucking my battery.
    What should I do to make it automatically disconnect after email retreival?
    PS: I configured my packet data settings with "Data Packet connection only when needed"
    Regards,
    Menno

    I found the only solution is to set the frequency of update to more than 30 minutes. This really is a problem since the next interval is 2 hours, not 1 hour like in other nokia devices. I don't believe that my nokia N series had this problem, either.
    This is a SIGNIFICANT issue that needs to be fixed by nokia considering they want the e71 to be messaging/email device. It is very annoying to have to be prompted to close the data packet connection to do anything; i.e. make calls, use google maps, etc. Checking e-mails only once every 2 hours is obviously not a solution either.
    Get on the ball nokia!

  • Data connection disabled automatically & issue on social networking

    I hv Lenovo A7000-a with latest firmware upgrade but I can't connect data in 2g Vodafone India(Bhubaneswar). I can't use WhatsApp,fb,twitter and other applications in 2g network.I can't sent messages even don't receive messages in WhatsApp, fb,twitter & some other apps like taht..sometime data connection disabled automatically. I can't connect with other phone hotspot using wlan but some of phone can connect me with my hotspot.... This problem persists in my phone in xender,share it and wlan sharing with my friends... Why this happened that I don't know but I know that from which time I last est update the new system version I am facing this problem.

    Hi usman34,
    If you are having an issue with keeping a good cellular data connection with your iPhone, I would suggest that you troubleshoot using the steps in this article - 
    iPhone cellular data connection issues - Apple Support
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • Lenovo a7000-a Data connection disabled automatically & issue on social networking

    I hv Lenovo A7000-a with latest firmware upgrade but I can't connect data in 2g Vodafone India(Bhubaneswar). I can't use WhatsApp,fb,twitter and other applications in 2g network.I can't sent messages even don't receive messages in WhatsApp, fb,twitter & some other apps like taht..sometime data connection disabled automatically. I can't connect with other phone hotspot using wlan but some of phone can connect me with my hotspot.... This problem persists in my phone in xender,share it and wlan sharing with my friends... Why this happened that I don't know but I know that from which time I last est update the new system version I am facing this problem.

    RW-50010: Error: - script has returned an error: 1
    RW-50004: Error code received when running external process. Check log file for details.Check the following log file for more details about the error:
    $APPL_TOP/admin/$CONTEXT_NAME/log/installAppl.log

  • Ho to automate data extraction from KSB1 and GR55 transaction code

    Hi All,
    Can you please let me know if their is a way to automate data extraction from transaction code KSB1 and GR55. I have to extract data from 5 different servers .i.e different server for each region and again i have different controlling area codes in each region. Following are the details which i use to extract the data. It takes too long for me to extract data from all this regions and controlling area codes using my parameters. It's very time consuming so i want to automate this process. I am end user so i don't have any admin rights. Please let me know any workable solution asap.
    Production areas : PNA for Americas, PSI for Asia Pacific and Japan, PGY for Germany, PIT for Italy and PEU for Europe
    Controlling area codes in PNA : CAR for Argentina, CBR for Brazil, CMX for Mexico and CUS for USA. Same way there so may other controlling area codes for all other production areas
    Period From 1 to 12
    Fiscal Year : 2009
    Cost Centre Group : G_6284
    Cost Element Group : 1742000000
    Please let me know in case you need more details.

    Hi,
    Here follows a translation from German:
    SAP GUI (client) for Windows enable
    Start SAP Logon and log on to the SAP server.
    Click the button on the toolbar to adjust for Local Layout.
    Click Options and then click the tab for the scripting.
    Select the Enable checkbox for scripting.
    Disable the checkbox for Notify when a script is assigned to an active GUI and the checkbox for Notify when a script opens a connection.
    Save the settings and restart the SAP GUI again.
    SAP-server enable
    With the following procedure, you can enable scripting by the SAP client temporarily. The specified value in this way is lost when you restart the server.
    Start SAP Logon and log on to the SAP server.
    Start a transaction RZ11.
    Enter sapgui / user_scripting in the window to manage the profile parameters.
    Click on ads.
    Click in the window to display the profile parameter attributes to change value.
    Enter TRUE in the field for a new value.
    Save the settings and log out from the SAP GUI.
    Quit the SAP Logon.
    Note:
    If the server administrator edited the application server profile of the SAP system to sapgui / user_scripting = TRUE to include the scripting is enabled when you restart the server by default.
    SAP provides an option to change the network connection mode at any server. The following two connection modes are available: high-speed connection (LAN) and connecting with a slow speed. Although Functional Tester works in both modes, the high-speed connection with a recorded script is played only in this mode. This also applies to other modes. They must reflect your SAP script in the same network connection mode, with which the script was recorded. It is recommended that the mode of "high-speed connection, as it offers a greater number of valid recognition properties.
    Regards,
    ScriptMan
    Edited by: ScriptMan on Apr 13, 2010 12:32 PM

  • Is there a way to selectively put on and off your data-connection(3G)?

    Hi there!
    I'm currently working on an app that uses GPS to track a person's location, this location is than in turn send to an online database.
    Obviously sending that location to the database requires an internet connection, I could use WIFI for that which is no issue but what if there's no WIFI available, if that's the case I want to use the phone's 3G data connection.
    Since I only need that connection for a short period(just to send the location to the database) I think it's rather dumb to put it on when opening the app and keeping it on as long as the app is running.-->It would quickly drain the available data memory.
    So my question is, is there a way to put the 3G connection ON and OFF in code? So the app would have the rights to do that.
    To clarify: Suppose whenever I track a person's location(every 5 minutes for example --> that's sufficient for my app even though it doesn't seem so useful) I want to put on the 3G connection to send the location to the database.
    The following 5 minutes however I've no need of that internet connection since no communication with the Database is required so I would want to put the 3G connection off then.
    -->Is this possible?
    Thanks in advance!
    My best regards
    Jan

    There is no way to turn on and off the phones 3g connection via code.

  • Slow/non-existent data connection on 3GS/iOS 4.0.1

    I have been a happy 3GS user since last December. About three days ago, I synced to iTunes and installed the latest software update, to iOS v4.0.2. Since then, whenever I try to access any web page in Safari, it just sits there for a while trying to access the page before eventually coming up with a message that it was unable to access the web page "because the server stopped responding". The same happens if I try to use the data connection via another app (e.g. Facebook). I should add that everything works fine if I connect via WiFi.
    I did manage to get on the web yesterday evening when I was in a city centre area with five bars of 3G signal strength, but even then it took ages to load a web page. I have always had between about two and four bars of signal strength at home, and this has always been sufficient to load web pages reasonably quickly.
    I usually use the 3G data connection several times a day, and have never experienced this problem until now. I've just got off the phone with O2 technical support – they asked me first to reset network settings and then reset all settings, but neither of these made any difference. They left me with two suggestions: go to an o2 store and ask them to try my SIM card in a different handset (I don't have much faith in this working), or do a factory reset/restore via iTunes. I'm loathe to do this unless absolutely necessary, as I guess it means losing all my data and having to resync everything from scratch.
    Is anyone else experiencing this problem? Any suggestions other than what the o2 guy said? Is there any way I can get back to 4.0.1, which worked fine?
    Thanks in advance,
    Rob

    Wow, our responses are starting to get long.
    robgrayson wrote:
    actionmarker wrote:
    It's a pity he didn't (or wouldn't) change the SIM. It probably took him longer to explain to you that he didn't need to test the SIM that it would have take to set up a new SIM and test it.
    So unfortunately, you still don't know for certain that it's not a SIM issue.
    I agree it's a pity. I really wanted to be eliminate this as a possible cause, but I couldn't make the guy do it.
    Maybe try another store, or do it over the phone and get them to send you one out?
    I did a full restore – and incidentally discovered that the backup I made before applying the 4.0.2 OS update was not available to restore – I'm guessing it may have been corrupted or something. So I've had to revert to a backup that was saved in June, which is a bit of a pain. Anyway, the restore has changed nothing in terms of connectivity – with 3 bars of 3G signal, no web page will load – I just get the spinner in the status bar at the top of the screen, and eventually a message saying that the server has stopped responding.
    Did you restore to 'new' or tried to the backup? You need to try it to 'new' as this erases all previous settings.
    I restored it to the backup. I guess I need to restore it to new – which is a pain because it means I then have to manually reset any settings for mail accounts, etc.
    You need the restore to 'new' so you have a clean phone, test in internet connection with nothing added and see what happens.
    Personally I don't particularly like the way iTunes backs up. It's probably fine when this are all good, but when testing or trying to fix issues, I find it a bit limited.
    All the Backups on your Mac go to this location;
    /Users/[username]/Library/Application Support/MobileSync/Backup/
    The issue I have with it is that in the backup folder, some of the files are overwritten each time that a backup occurs, making only the last backup available for restoring.
    Yes, I find that pretty annoying to. I've just lost two months' worth of text message history because of it.
    My work around for this is to copy the complete backup folder then in the copied folder I open the Info.plist file with TextEdit and edit the Device Name string by adding the date. When you then open iTunes and try to restore from backup, multiple backups are displayed.
    You said you copy the entire folder before editing the Info.plist file. I presume you put the copied folder in the same location as the original?
    In the backup folder, there is a folder with a big long alphanumeric name. Make a duplicate of this and leave it in the backup folder, so there is the original folder and copy of original folder. then edit the info file in the duplicate.
    Once done, open itunes without the phone connected and go to iTunes > Preferences > devices and you should see your extra backup appear in the list there.
    When you edit the info file change the following line:
    +<key>Display Name</key>+
    + <string>[robgrayson]’s iPhone 20100511</string>+
    I add a date at the end of the line. This line is then displayed in iTunes as the name of the backup
    I also set iTunes to not automatically sync when the iphone is connected. This give the control back to me of when and how often I backup.
    Yes, I changed this setting yesterday too.
    Do you use Time Machine to back up your Mac? If so, you could restore the backup location on your Mac to before you did the restore and bring back you most recent backup that way.
    Yes, I do use TM – I've been using it for a couple of years but have never actually had to restore anything. Just to be clear, I suppose you mean restore the backup folder from before I did the iOS upgrade, and then restore my phone from that?
    How about this: if I do a restore from new first and see if that makes any improvement, do I then have an option of applying a dated backup (or would I have to go through the whole restore process again in order to do so)?
    Yes, Navigate to the backup folder location, open time machine and restore to yesterday or when ever the last back was.
    Duplicate the backup as above as a precaution.
    Check iTunes recognises it. (make sure iTunes is closed when you are adjusting the backup files.
    Restore to 'new' and check the phone. If it all is OK and working, its probably something in the backup and you don't want it back on your phone, and you will have to manually restore everything.
    So unfortunately, you don't seem to be any closer to resolving the issue. Let us know if you want any more help, or alternately how you go with Apple.
    I may try restoring from a previous backup via Time Machine, as you suggested. (This should also give me back my lost text messages.) There are also rumours that iOS 4.1 will be released today, so I may give that a try first.
    Thanks once again for your very helpful suggestions.
    If I were you, I would try to get the phone working before you worry about 4.1
    Message was edited by: actionmarker

  • How to create a data connection with dynamic XML file?

    Thanks for all reply first!
    I have formatted the submitted data into an XML file on the server side,this file can be import to PDF form correctly.
    I try to send this XML file to the user to let him can review what he has submitted.
    I guess that I should create a data connection to the XML file so that it can be reviewed by the user.
    But the question is that the XML file is dynamic generated.
    How can i do?
    give me some clus or examples,please.
    thanks,
    Jasper.

    Hi Jasper,
    To show user back the result, you can use PDF instead of XML. You can store the PDF template in server and you can merge XML data with PDF template by Livecycle Form Data Integration service.
    We, as KGC, can generate huge number of Adobe Livecycle forms in small periods. Also we give consultancy on Adobe Livecycle ES products and Adobe Livecyle Designer. In case of any need, do not hesitate to contact us.
    Asiye Günaydın
    Project Consultant
    KGC Consulting Co.
    www.kgc.com.tr

  • How do you configure the set of port to use for FTP passive data connection

    I was able to start the ftp server xml db and connect to it locally. When I tried to connect to it from home, I was able to log in but when i do a "get" command the sessions hangs. I also tried passive mode and do a "get" command and it gives me a connection refused error. I am using the default port 2100. I think this might be a firewall issue with the data connection port. I am not sure which range of ports to open for the passive ftp connection on the server side or where to go and set them for for the ftp server to use? Or this issue might not be firewall related??? Any thoughts. Thanks.

    This is a typical problem with VPN/Firewall software and FTP on ports other than 21.
    When you open the FTP data connection the FTP Server identifies which port the data will be sent on using the PORT command which is sent on the command port (typically 21 with a normal FTP server, 2100 by default with XDB). THe client then opens that PORT to accept the data (file, output of an ls etc).
    As I understand it most VPN/Firewall are configured to monitor 21 for 'PORT' requests. They then understand to allow connection on the PORT number passed on the command PORT. Hence with Port 21 firewall / VPN software is not a problem. However since the XDB command PORT is something other than 21 they do not see / honour the PORT commands from the server and hence the client cannot open the data connection on the specified PORT
    As to how to solve it, I wish I knew (After 5 years I still can't use XDB FTP from home to a machine in the office once the VPN tunnel is open :( ). I'm sure it's going to be firewall / VPN software specific and may need the VPN servers to be configured.
    The best bet would be to run the FTP server on 21...
    Add the following line to your listener.ora file
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP) (HOST = hostname) (PORT = 21))
    (PROTOCOL_STACK = (PRESENTATION = FTP) (SESSION = RAW)))
    and then restart the listener as root
    Start the listener as root.
    At the operating system prompt, enter tnslsnr with optional command line arguments. The usage is as follows:
    tnslsnr [listener_name] [-user user] [-group group]
    where:
    Table 4-3 tnslsnr Utility Options
    Option Description
    listener_name
    Specify the name of the listener. If omitted, the default name LISTENER will be used.
    -user user
    Specify the user whose privileges the listener will use when super user (root) privileges are not needed. After performing the privileged operations, the listener will give up root privileges irreversibly.
    -group group
    Specify the group whose privileges the listener will use when super user (root) group privileges are not needed. After performing the privileged operations, the listener will give up root group privileges irreversibly.
    The listener will temporarily switch to the provided user and group immediately after startup. All subsequent operations will be done with the specified user and group privileges, except the system calls necessary to listen on configured endpoints. The listener will revert to super user (root) for a short period of time to listen on reserved addresses, such as TCP ports less than 1024. After the listener starts listening on all of its endpoints configured in listener.ora, it will switch to the specified user and group irreversibly. Therefore, the listener will give up the root privilege that it initially had. In the current release, -user and -group command line arguments only accept user and group identifiers specified in numeric form.
    For example, to execute a root listener called mylsnr and have it use privileges of a user identified

  • I need HELP! I want to populate fields from a data connection...

    I am new to livecycle and am having problems making this work...
    I have an xml data table that is 5 columns wide and 1000 rows deep. (So too much data for list boxes)
    The data connection comes in looking like this:    - DataConnection
                                                                                   - (Ordered Group)
                                                                                        -Row
                                                                                              -(Ordered Group)
                                                                                                    Job
                                                                                                    Customer
                                                                                                    Part Number
                                                                                                    Rev
                                                                                                    Description
    When I pull Row into the form it makes a subform with the 5 fields as above.
    When I preview this it automatically pulls in the first record from the data source...I want to be able to fill in Job manually and have the other
    fields automatically pull in the appropriate information from the correct row in the data source. I have not been able to do this! Can anyone
    help me?
    Thank You,
    CLC

    Hello,
            I am sorry to say that, i felt hard in understanding the requirement. Can you please pass over the working copy to my email address [email protected], i try to get what you are looking for.
         Please find a sample that you can download from the link below, which demonstrates populating fields from a data connection. please take a look at it and i hope this will help you.
    https://acrobat.com/#d=5TstZ2VeptoSs6IAZ*81Yw
    thanks,
    Rajesh

  • 5800 Email setup wizard use data connection withou...

    While setting up my email account on 5800xm through Messaging>Options>Settings>Email, the email setup wizard automatically opens. After defining the email address and password, the wizard automatically attempt to connect through 3g data connection to retrieve the email settings. Why is there no options to choose which connection to retrieve the email account settings?
     Does anyone expereince the same problem? How can i change this? 
    was: 3310--> N80 v5.0719.0.2--> N82 v31.0.016; now: 5800xm v40
    KeN82Ny

    It seems to have worked on my 5800 Xpress.  To decode the advice, two icons regarding the email setup were on my screen, one for email and one for email set up.  The email set up was in pink.  I pressed the white button to get the Organise, went in , selected the pink email set up icon and Removed it.  Now both icons are gone.  We will see tomorrow morning if I get the annoying message again asking me to go on the network.  Think it is sorted. I suspect that accidentaly starting the proceedure keeps it hanging around in the background.

  • Data Connection to MS-SQL using Windows Auth from untrusted machine

    We have an Excel Spreadsheet that uses a Data Connection to a MS-SQL database.  The database server is joined to our domain, and Windows Authentication is enabled.
    Here is a sample of the connection string (with revealing info obfuscated):
    Description=DataConnection;DRIVER=SQL Server;SERVER=10.x.y.z;UID=domain_user;Trusted_Connection=Yes;APP=Microsoft Office 2010;DATABASE=DatabaseName
    And the Authentication Settings are set to "Windows Authentication"
    This works perfectly fine from a domain-joined / trusted machine.  It doesn't even ask for credentials; it just works flawlessly when I hit Refresh.
    It will work from a non-domain / un-trusted workstation, if I use SQL Authentication.  But we are trying to move away from that.
    Likewise, it will from a non-domain machine using Windows Authentication if I use "runas" to launch Excel with domain credentials, as follows:
    "runas /netonly /user:domain\user %path-to-excel%\excel.exe"
    However, using "runas" is a kludge, and our employees will almost certainly have issues... even if I were to create batch files to help automate it.
    When launching Excel normally (without using "runas") from a non-domain machine, it gives this error when I hit Refresh:
    Upon hitting OK, I have the option to un-check "Use Trusted Connection" and manually enter a user/password.  I put in a valid user that would be able to connect fine from a domain-joined machine, or that worked fine using "runas".
     This is the error it gives with that:
    At this point, I have not a clue what to do to get Excel to successfully connect with domain credentials from a non-domain machine. 
    Ideas?

    Hi ltwally1,
    From your description, you want to connect to non-domain machines using domain credentials. Based on my research, you can use the
    ShellRunAs utility to achieve your requirement , it provides functionality similar to that of RunAs to launch programs as a different user via a convenient shell context-menu entry. 
    Reference:
    How to Run Programs as a Domain User from a Non-domain Computer.
    However, if you still encounter issues by using  ShellRunAs utility, you can consider to use the Credential Manager built into Windows. For more details, please review
    this similar
    blog.
    Thanks,
    Lydia Zhang
    If you have any feedback on our support, please click
    here.
    Lydia Zhang
    TechNet Community Support

  • Export to Excel: Row Auto Height Removed on Data Connection Refresh

    Hi all,
    When I perform a Data Connection Refresh on an Excel workbook exported from SharePoint it removes the row auto height I had in place, hiding valuable information. This is an additional column I added to perform some calculations.
    Any ideas?
    K.
    Personal Blog: http://thebitsthatbyte.com

    Hi Kelly,
    As I understand, you have a SharePoint list and click export to Excel under List tab. Then the list is exported to Excel spreadsheet.
    Generally speaking, all field column width and height keep in the same size when the list is exported to Excel. In Excel, under PAGE LAYOUT tab > Scale to Fit, make Width and Height to be Automatic and Scale to 100%.
    Then the cell should be good. If there is some column still exceed the width of Excel cell, please right click the cell > Format cells > Alignment > Text control, click Wrap text to increase the cell size to fit the text, or click Shrink to fit
    to shrink the text.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • TS3297 I find the instructions to use automatic date/time in ts3297 to be totally unacceptable.

    I do things on my MBP (software builds) that REQUIRE consistent timestamps. I also travel extensively, which frequently results in "going backwards in time' (flying east to west). Updating date/time automatically causes total confusion for my builds, among other things.
    I haven't debugged (yet) the same error message on my iPhone 4 which _does_ have 'automatic date/time' set.
    My iPhone 4S and original iPad seem to work just fine. The 4S has automatic date/time, original iPad has manual date/time.
    All ios devices are 5.1.1, MBP is Mountain Lion. In other words, no software updates required for any device.
    The interesting thing, it's only updates.... Now that _does_ require date/time info, but I would expect to see 'no updates found', not 'unable to connect'.

    Okay, checked the iPhone 4 debug steps.
    Not my ISP, I can press 'featured' in the App Store and see what's up. Safari works, etc.
    Doesn't matter whether connection is Wi-fi or 3g, fails.
    Powered down/up, no change. Switched from automatic to manual and back, no change.
    Went back to MBP, the OSX app store works just fine. It found I needed to update iTunes on my MBP. We'll see what happens after that. Can't expect it to solve my iPhone 4 issue, though.
    Download time for iTunes update is 35+ minutes (hotel connection). I'll be back.....

  • Automate SQL Connect in essbase

    Is there a way to automate the connection to SQL database while retrieving the data in essbase during rules file build. So everytime I have to update the metadata or fact data I won't have to type in the username and password for the SQL Data Source.
    Thanks ahead of time.

    You should write a maxl shell script (embedded in a batch script )which should call the essbase metadata and dataloads from the sql and later parameterize your essbase login credentials in the Batch script.
    For example.
    Content of batch script
    @echo off
    set d=%date:~-4,4%%date:~-7,2%%date:~0,2%
    set d=%d: =_%
    set t=%time:~0,2%%time:~3,2%%time:~6,2%
    set t=%t: =0%
    set ESSUSER=admin
    Set ESSPWD=Password
    set ESSSERVER=localhost
    set ESSAPP=Sample
    set ESSDB=Basic
    set DBUSER=admin123
    set DBPWD= password
    SET ESSBASE SERVER PATH=D:\Hyperion\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer
    set MaxlScript=D:\Hyperion\Middleware\user_projects\epmsystem1\Essbaseserver\essbaseserver1\bin
    essmsh "D:\Load.mxl" %ESSUSER% %ESSPWD% %ESSSERVER% %dt% %tm%
    Maxlscript Content
    spool on to "D:/dataload.log";
    set timestamp on;
    login $ESSUSER $ESSPWD on $ESSSERVER;
    display session all;
    alter system kill request all;
    alter system logout session all force;
    import database $ESSAPP.$ESSDB data connect as $DBUSER identified by $DBPWD using server rules_file Sample.rul on error write to "d:\rule.log" ;
    spool off;
    logout;
    exit;
    I hope this one helps you
    Thanks,
    Sreekumar Hariharan

Maybe you are looking for