Periodic pauses when copying data

I noticed that when I tired copying a couple dozen gigabytes to my Apple Xserve Raid (configured RAID 5 + Hotspare) that the status of the data transfer would pause periodically every 500MB-800MB or so, for a duration of approximately 8 seconds +/- 2 seconds)...
Can someone help me shed some light on why this might be happening?

Google translate at http://translate.google.com/ is your friend. Your post translates to:
+The finder could (not) conclude this operation because some data in "Favorites" could not be read or written. Error: -36)+
So, there's something within Favorites that's corrupted. Try copying those a couple at a time to determine the culprit and delete it.

Similar Messages

  • Clean install on new 1TB hdd, Yosemite keeps freezing when copying data from an ext drive and also from a usb

    Hi all,
    I'm trying to figure out why my macbook keeps freezing when I try to drag my data across to it (even small files from a USB).
    I've had to force restart over a dozen times today :/
    I ran EtreCheck and there are a couple of issues (I've no idea what they mean).
    If anybody could share some light into the report below I would be very grateful:
    Problem description:
    Macbook Pro mid 2010, Yosemite, blank new install on 1 TB hdd, keeps freezing when copying data from an ext drive and also from a usb
    EtreCheck version: 2.2 (132)
    Report generated 5/2/15, 4:55 PM
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Mid 2010) (Technical Specifications)
        MacBook Pro - model: MacBookPro7,1
        1 2.4 GHz Intel Core 2 Duo CPU: 2-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery: Health = Normal - Cycle count = 2061 - SN = W013358KQD3BA
    Video Information: ℹ️
        NVIDIA GeForce 320M - VRAM: 256 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.3 (14D136) - Time since boot: 0:7:25
    Disk Information: ℹ️
        ST1000LM024 HN-M101MBB disk0 : (1 TB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 999.35 GB (968.00 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        HL-DT-ST DVDRW  GS23N 
    USB Information: ℹ️
        Apple Inc. Built-in iSight
        Apple Internal Memory Card Reader
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
        Apple Inc. Apple Internal Keyboard / Trackpad
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Problem System Launch Daemons: ℹ️
        [failed]    com.apple.mtrecorder.plist
    Launch Daemons: ℹ️
        [failed]    com.apple.spirecorder.plist
    User Launch Agents: ℹ️
        [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
        [loaded]    com.google.keystone.agent.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    UNKNOWN Hidden (missing value)
        Caffeine    Application  (/Applications/Caffeine.app)
    Internet Plug-ins: ℹ️
        Default Browser: Version: 600 - SDK 10.10
        QuickTime Plugin: Version: 7.7.3
    3rd Party Preference Panes: ℹ️
        None
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
            20%    WindowServer
             6%    com.apple.WebKit.WebContent(7)
             4%    Safari
             3%    hidd
             1%    launchd
    Top Processes by Memory: ℹ️
        1.07 GB    com.apple.WebKit.WebContent(7)
        439 MB    kernel_task
        90 MB    spindump
        57 MB    mdworker(5)
        57 MB    Safari
    Virtual Memory Information: ℹ️
        4.54 GB    Free RAM
        3.46 GB    Used RAM
        0 B    Swap Used
    Diagnostics Information: ℹ️
        May 2, 2015, 04:47:31 PM    Self test - passed
        May 2, 2015, 01:39:52 PM    /Library/Logs/DiagnosticReports/DesktopServicesHelper_2015-05-02-133952_[redact ed].cpu_resource.diag [Click for details]
        May 2, 2015, 01:23:20 PM    /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2015-05-02-132320 _[redacted].crash
    Regards
    Hoz

    Thanks - I had a 1TB hdd in my macbook for about 12 months but it started playing up a few days ago (I got the question mark folder on bootup) so I bought another 1TB hdd (same model) and started from scratch.
    My macbook is an early 2010... now I'm wondering if Yosemite is a bit too much for it?
    The ext hdd is my timemachine backup, so yes I have used it often and it has my TM backups - and the usb is a new usb which Ive used a few times.
    The issue seems to be when Im transferring files from an ext drive to my mac. I can use it fine and browse (worked find for 45 mins) then I tried to bring my data across.. and it copied a few gig over before total freeze.
    This has happened about a dozen times.
    I keep running disk utility and checking the disk. I also just ran the apple diagnostics tool that came in the apps cd - the hardware apears to be fine.
    I have a 250 gb partition for the OS and the rest is my second partition for data.
    I'm now wondering if I should reformat the first partition, install leopard from the CD, then upgrade to mavericks and leave it at that.
    Any thoughts would be awesome. Thank you for reading and replying!
    Hoz

  • My external hard drive ejects when copying data. It works on windows and ubuntu. Are there any fixes?

    My external hard drive ejects when copying data. It works on windows and ubuntu. Are there any fixes?

    mine do the same thing... its one of the bugs from the 10.6.8 update

  • Hp probook 4403s run slowly when copy data

    Why do my hp probook 4430s core i3-2330 with 4GB ram, 500GB HDD run slowly while copying data? (tested in win8-64bit, win 7-64 bit, win 7-32bit) My HDD is tested. It is in good condition, no bad sector. When i copy data (between logical drives or external drives), my laptop is running slowly and lad. It runs like a old computer with pentium 4 and ram 500MB. So, when i copy data, i do nothing and waiting it completed.. My old laptop with core2duo and ram 1GB give me both copying data and do another things like browse web easily?
    Please help me solving it.

    Hey mayouly,
    While "slow" is a subjective term, I want to give you some things to consider. You may already be aware of these things but I wanted to put the information out there, just in case. Over time, hard drives accumulate data and the more full they are, the more time it will take a to access data, in turn slowing down the copying process. Also as you use your computer, the services running in the background accumulate and can be set to run on start up without you being aware. To check what is running in the background,
    Bring up Task Manager (Ctrl + Shift + Esc) > Click on the Processes tab > Click on the Memory column to put in descending order. 
    This will put the heavier, resource-hogging processes at the top. Sometimes anti-viruses may have an updater service going, or another 3rd party program may have an updater service running without you knowing about it. Like I mentioned, these processes could be installed set by default to start up when you power on the computer, even if you don't open that program. For instance, after installing iTunes, the applepush (iTunes' updater service) will run every time you power on the computer. This is not the only program that sneaks these services in. Browser toolbars will sometimes do the same thing. You can also check to see what is starting up at power on by using msconfig.
    Click the Start button > Type "msconfig" > click "msconfig.exe" > Click the Start Up tab.
    Every thing that is checked must start at power on. There may be some unnecessary processes in that list which can simply be unchecked. You'll want to use caution though because something that may look unfamiliar might be a required driver for your computer, like audio or touchpad software. When you're done making changes, Click Apply. It will prompt you to Restart. You should see a difference, if you can get rid of some unnecessary processes running.  Of course, every computer can use a recovery periodically, to clean up the clutter in the registry and get rid of unused applications and processes. You'll need to save your personal files on an external hard drive before performing a recovery because everything on the hard driver will be removed and Windows will be reinstalled. 
    If you go through these steps and the computer still seems slow, or if the computer has always seemed slow since you got it, you may see an increase in performance by installing additional RAM. If you haven't already used HP System Diagnostics to test your hard drive you will to follow these steps for a Hard Drive test.
    Turn off the computer.
    Use one of the following methods:
    Turn on the computer and immediately press the F2 key repeatedly, about once every second, until the HP System Diagnostics program opens.
    OR 
    Turn on the computer and immediately press the Escape key repeatedly, about once every second, until the Startup menu opens. Then press F2 .
    The System Diagnostics window allows you to run several diagnostic tests. Each test determines if the hardware is functioning properly, and displays an error message and a warranty ID if there is a hardware failure.
    I hope these steps help. Let me know if you have any questions. I'll keep an eye out for your reply

  • Excel 2010 Freezing when copying data

    Hi
    A user I support has an issue whereby Excel 2010 freezes when they are trying to copy and paste data within a particular spreadsheet. This issue is the same whether the file is opened from a network location or locally, the file doesn't seem particularly
    large - only 290KB. To troubleshoot this I have so far tried:
    Asking the user to save a new copy of the file, and then recreate the file from scratch.
    Reinstalling Office 2010 Std.
    Recreating the user's local profile on the PC.
    I copied the file to my own PC and found that while I could Insert data as much as I liked, I had the same problem copying and pasting data within the file. Excel froze & eventually Windows prompted me to close or restart Excel. On restart it launched
    a repaired copy of the file, in this repaired file the copy and paste issue seems to have disappeared.
    I'm not sure whether the issue is truly resolved in this repaired file. When I saved it Windows saved an xml file to say that "One or more invalid conditional formats have been removed." I'm not sure what to make of this, can you advise?
    Thanks
    Alex

    Hi
    Thanks for the suggestions, we've had no joy unfortunately. The spreadsheet in question now doesn't open at all, Excel crashes immediately when we try, even when we use Open and Repair as above. Please find the details below. Another spreadsheet is now giving
    us exactly the same behaviour and error code, compared to the first problem file there is very little formulae or formatting in this 2nd file.
    Does the below tell you anything?
    Thanks
    Alex
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: EXCEL.EXE
    Application Version: 14.0.7109.5000
    Application Timestamp: 522a4031
    Fault Module Name: EXCEL.EXE
    Fault Module Version: 14.0.7109.5000
    Fault Module Timestamp: 522a4031
    Exception Code: c0000005
    Exception Offset: 002e0de2
    OS Version: 6.1.7601.2.1.0.256.4
    Locale ID: 2057
    Additional information about the problem:
    LCID: 1033
    skulcid: 1033

  • I have to paste/special/text when copying from Firefox and pasting in Word or Excel

    When copying data from a table on IE, I just have to paste (ctrl-v), and the data is pasted into appropriate separate cells.
    In Firefox, I have to "paste special" and click "text" to separate the fields. Otherwise, all the data is pasted into a single cell or in the case of Word, one paragraph.
    Is there a setting that can be designated to allow paste as in IE or as within Word or Excel?

    The [https://addons.mozilla.org/firefox/addon/1852/ Dafizilla Table2Clipboard] extension should help with this.

  • 4.0 EA3 - Data Default not duplicated when copying a table

    I noticed that when copying a table from one schema to another, if a column has a data default property it is not preserved.
    Steps to recreate:
    Copy a table that has at least one column with a non-null DATA_DEFAULT property (right click on table -> table -> copy)
    Double click on the new table, and open the Columns tab. Notice that all values under DATA_DEFAULT are null.

    The same behavious exists in 3.2.20.09 and whether the table has existing data or not.

  • Retaining date/time stamp when copying files from a backup network drive

    How do I retain the date/time stamp when copying files from a backup such as a external drive or a network drive?

    i don't trust MA at all. known to create a lot of problems.
    instead, see the green box in this user tip.

  • Copy comments when doing data copy

    Hello,
    we have a copy function in IP that copies data from version to version.
    At the same time we have flagged 0VERSION as a Document attribute characteristic.
    What we need is that when we copy data from version A to version B, all the comments entered in version A are also copied to version B.
    Thanks for your help.
    C

    Hi Carles,
    did you find a solution?
    Thanks in advance for sharing your experience.
    Michael

  • Can't shown chinese text when copy & paste data from server to Outlook, Word & notepad, etc.( Office 2013)

    Can't shown chinese text when copy & paste data from server to Outlook, Word & notepad, etc.( Office 2013)

    Hi
    As per the information and details provided by you, when you copy & paste a data from server to Outlook, word, notepad, then you do not receive the Chinese text.
    For Outlook, please follow these steps: -
    Close and reopen Outlook in your western locale (or switch the windows system to your Western locale if you changed that),
    Manually change the message from Western to Chinese encoding, which you can do in all versions up to Outlook 2007.
    If you want to stay in your Chinese locale in Outlook 2007, then:
    After you hit reply, go to the Option tab > More Options.
    In the Encoding drop-down menu, select the Chinese encoding you are working in (Not the encoding used by the person who will receive the message)
    Note:
    To set the Chinese locale in all versions up to 2007 the controls are under.
    Tools > Options. In Outlook 2010 File tab > Options > Advanced > International options.
    Unicode (UTF-8)
    is a good setting for multilingual users.
    Check the
    Auto select 2007)/ Automatically select (2010) encoding box.
    I hope this information will be helpful for you.
    Thanks and regards
    Shweta@G 

  • When copying one of my old cassettes to a CD how do I get the data - album name, artist, etc. to show up when the CD is inserted into a player?

    When copying one of my old cassettes to a CD how do I get the data - album name, artist, etc. to show up when the CD is inserted into a player?

    To what format file are you saving from Audacity?  Although technically AIFF format can save data tags within the file itself I have not found this to always work with all applications.  Likely the information you enter into Audacity is just being saved in the file name.  When you add this file to iTunes, if iTunes cannot find tags it recognizes it will simply add the track with the file name as the track name.  You need to add the tracks to iTunes, then enter the information using File > Get Info for a track or series of tracks,
    Some of the above information may vary slightly depending upon the file format being used.
    It helps when asking questions here to provide as much information at the onset as possible.  We didn't know until this stage that all these menus were in fact part of Audacity and not iTunes.

  • Error when activating the copied data elem.:Medium key word in language DE

    Hello,
    I have copied data element dats and created a z data element for myself and added the text description.
    Am getting following error.Please guide me for the same-
      Check data element ZDATS1 (C04EAPHALES/15.01.10/16:37)
      Medium key word in language DE: length 18 > maximum length 10
      Data element ZDATS1 is inconsistent
    Please help me resolve the issue.
    Thanks.
    Edited by: sanjivrd on Jan 15, 2010 12:21 PM

    Hi,
    It won't take from domain it always takes from data element... data element only stores the semantic information... Try to change the domain description to someother and then activate both domain and dataelement...and also table and then see...It will take from data element only.
    Regards,
    Nagaraj

  • Trigger a Workflow when a date is reached in SharePoint Online

    I have created a simple list workflow (SharePoint Online) which emails a user, informing them a Document's
    Target Closure Date has been reached. The workflow works fine when started manually.
    I want to trigger the workflow only when Target Closure Date matches today's date.
    The best solution seemed to be to use a Retention Policy. So I went to:
    > Library Settings
    > Information Management Policy settings
    > Document content type
    > ticked 'Enable Retention'
    > Time Period:  Target Closure Date + 0 days
    > Action:  Start the relevant workflow.
    This worked only on two occasions - both were Saturday mornings, at 3.30am and 4.30am. I can see
    in this MS article the Expiration Policy timer job only runs weekly on SharePoint 2013, so can anyone confirm that the schedule is the same in SharePoint Online?
    If so, is there any way in SharePoint Online I can trigger a workflow when a date is reached?
    Thanks for your help,
    Alyosha

    Hi Alyosha,
    According to your description, my understanding is that you want to send an email to a user when the Target Closure Date was reached in SharePoint Online.
    The timer job of Retention Policy runs weekly in SharePoint Online, so we cannot use the Retention Policy to trigger the workflow.
    As a workaround, I recommend to create a workflow associated with the library to send the email when the Target Closure Date was reached.
    Here are the detailed steps:
    Create a workflow associated with the library and set the workflow to start when an item is created.
    Select Pause until Date to set the workflow to pause until the Target Closure Date.
    Select Send an Email.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • BPC 7.5 NW - COPY DATA in ScriptLogic

    Hi we have this code ok.
    *WHEN CTA_HHRR
    *IS BAS(REMUNERACIONES)
    *REC( FACTOR = ([CTA_HHRR].[PARAM_000000001],[Centro_De_Costo].[Dummy]),BAS(REMUNERACIONES) )
    *ENDWHEN
    Now, we need copy data value inserted in ACCOUNT1 for 2010.ENE to FEB.2010 until 2010.DEC.
    But MONTH is Dinamic, Code need work for any YEAR, 2010 or 2011, or 2012, etc.
    We all time insert value in Current view for  ????.ENE
    After value is inserted in ????.ENE need run ScriptLogin for Copy Values from ????.ENE to ????.FEB until ????.DEC
    For all ACCOUNTS inside BAS(REMUNERACIONES).
    After COPY process, we run Code:
    *WHEN CTA_HHRR
    *IS BAS(REMUNERACIONES)
    *REC( FACTOR = ([CTA_HHRR].[PARAM_000000001],[Centro_De_Costo].[Dummy]),BAS(REMUNERACIONES) )
    *ENDWHEN
    This Code Ajust IPC value, after call Currency Convert to USD and PEN.
    We insert in Include :
    *include COPIA.LGF
    *include FXTRANS.LGF
    Working good.
    FXTRANS.LGF
    *RUN_PROGRAM CURR_CONVERSION
          CATEGORY     = %CATEGORY_SET% 
    //GROUP = NON_GROUP 
          TID_RA = %TIME_SET%
          R_Entity = GLOBAL
          OTHER = [Centro_De_Costo=%Centro_De_Costo_SET%]//For More than one other scope parameters: OTHER = [CentroDeCosto=%ENTITY_SET%;INTCO=%INTCO_SET%...]
    *ENDRUN_PROGRAM
    Thank you.

    This code working:
    *XDIM_MEMBERSET CATEGORY = PLAN
    *XDIM_MEMBERSET Centro_De_Costo = Dummy
    *XDIM_MEMBERSET CTA_HHRR = BAS(REMUNERACIONES)
    *XDIM_MEMBERSET Empleado = %Empleado_SET%
    *XDIM_MEMBERSET RPTCURRENCY = LC
    *XDIM_MEMBERSET TIME = %YEAR%.JAN
    *XDIM_MEMBERSET MEASURES = "PERIODIC"
    *WHEN TIME
    *IS %YEAR%.JAN
    *REC(FACTOR=1, TIME = TMVL(1,2010.JAN))
    *REC(FACTOR=1, TIME = TMVL(2,2010.JAN))
    *REC(FACTOR=1, TIME = TMVL(3,2010.JAN))
    *REC(FACTOR=1, TIME = TMVL(4,2010.JAN))
    *REC(FACTOR=1, TIME = TMVL(5,2010.JAN))
    *REC(FACTOR=1, TIME = TMVL(6,2010.JAN))
    *REC(FACTOR=1, TIME = TMVL(7,2010.JAN))
    *REC(FACTOR=1, TIME = TMVL(8,2010.JAN))
    *REC(FACTOR=1, TIME = TMVL(9,2010.JAN))
    *REC(FACTOR=1, TIME = TMVL(10,2010.JAN))
    *REC(FACTOR=1, TIME = TMVL(11,2010.JAN))
    *ENDWHEN
    But not want coding in ScriptLogin : 2010 i need var
    This code Working only for first line or single line the REC:
    *XDIM_MEMBERSET CATEGORY = PLAN
    *XDIM_MEMBERSET Centro_De_Costo = Dummy
    *XDIM_MEMBERSET CTA_HHRR = BAS(REMUNERACIONES)
    *XDIM_MEMBERSET Empleado = %Empleado_SET%
    *XDIM_MEMBERSET RPTCURRENCY = LC
    *XDIM_MEMBERSET TIME = %YEAR%.JAN
    *XDIM_MEMBERSET MEASURES = "PERIODIC"
    *WHEN TIME
    *IS %YEAR%.JAN
    *REC(FACTOR=1, TIME = %YEAR%.FEB )
    *ENDWHEN
    This code not working:
    *XDIM_MEMBERSET CATEGORY = PLAN
    *XDIM_MEMBERSET Centro_De_Costo = Dummy
    *XDIM_MEMBERSET CTA_HHRR = BAS(REMUNERACIONES)
    *XDIM_MEMBERSET Empleado = %Empleado_SET%
    *XDIM_MEMBERSET RPTCURRENCY = LC
    *XDIM_MEMBERSET TIME = %YEAR%.JAN
    *XDIM_MEMBERSET MEASURES = "PERIODIC"
    *WHEN TIME
    *IS %YEAR%.JAN
    *REC(FACTOR=1, TIME = %YEAR%.FEB )
    *REC(FACTOR=1, TIME = %YEAR%.MAR )
    *REC(FACTOR=1, TIME = %YEAR%.ABR )
    *REC(FACTOR=1, TIME = %YEAR%.MAY )
    *REC(FACTOR=1, TIME = %YEAR%.JUN )
    *REC(FACTOR=1, TIME = %YEAR%.JUL )
    *REC(FACTOR=1, TIME = %YEAR%.AGU )
    *REC(FACTOR=1, TIME = %YEAR%.SEP )
    *REC(FACTOR=1, TIME = %YEAR%.OCT )
    *REC(FACTOR=1, TIME = %YEAR%.NOV )
    *REC(FACTOR=1, TIME = %YEAR%.DEC )
    *ENDWHEN
    Any idea ?

  • Showing GL, PA Period error when create new Project

    Hi All,
    I am facing an Issue while creating a Project through Template, though I have opened PA Periods and GL Periods of current, but still showing following error
    "Cannot copy a budget to a period which is out of the range of system defined periods (e.g. PA period or GL period)"
    Please help me in resolving this.
    Regads
    Madhu

    Hi
    I assume your template budget has periods within the range dates of the template project, between the start date and the completion date of the project.
    When you copy the template to create a new project, enter the start date of the new project as the start date of the template. If your project start date is different from the template start date, the system will try to more the end date, and may also try to move the budget periods, so those will keep the same lenght, but starting from the new project start date. In those case you might be creating budgets in other periods then the original template budget.
    Dina

Maybe you are looking for