Periodically disappears outgoing traffic. Iphone4. SIM card changed, update the firmware.
periodically disappears outgoing traffic. Iphone4. SIM card changed, update the firmware.
This wine automatic translation ... I can not make outgoing calls except emergency calls.
Similar Messages
-
The salesperson for my iphone 4 said on Christmas morning we could go to our online account, select my number, select to change my SIM card, and enter the ICCID number so that I'd be able to use my iphone 4 today instead of my old phone (not an iphone). I have not seen any such steps. Help?
I suspect the salesperson that told you that meant your online account with your carrier...have you tried logging into your carrier account online? To do this will require the sim number on your sim card, as well as the phone's IMEI number...you get the sim number off the sim card & the IMEI number, for the phone, is printed on the box.
-
Hi Guys,
I have a Nokia 9500 symbian operating system phone and have enabled the "lock if sim card changed" option. And now when I put a new sim to my phone it gets locked and for unlocking request the password or even when I put back my old sim and try to off the setting of sim change it requests for password. And unfortunately I have forgotten the password; and please don't bombard me that whey enbled this option and give password if I can't remember it; actually it's first time I have forgotten a password. So does anyone know how to off this option and use other sims in my cellphone.
Thanks,you can reset your handset back to factory by turning off the handset, remove battery cover and battery, open handset and hold CTRL+Shift+F and re insert the battery at the same time continuing to hold this key combination down, the nokia logo will show on the internal screen and then it will turn grey and ask if you wish to confirm the format, choose yes and the format will load and the handset will re-boot. Unfortunatly all of your data will be lost but will get your handset working again.
doing this is a little tricky so be prepared to try more than once
Short but to the point. -
I have iphone4s in Shanghai, China, but I cannot use it to make a phone outside Shanghai. I have already changeded my SIM card and upgraded the iOS to 5.1 vision. Now can I slove it?
It's not clear what you mean. Do you mean you can't place a call to anyone outside of Shangai? That would be an issue with the calling plan you have with your carrier. Contact them. Likewise, if you can not place a call when you are outside your coverage area, that is also a carrier issue. If you are trying to use a different carrier while travelling, it's possible your phone is carrier locked and you can not use the carrier you are trying to use.
-
E66: "Lock if SIM card changed" menu is missing?
Hello everyone!
I have an E66 device and I haven't found Lock if SIM card changed option in the Settings/General/Security/Phone and SIM card menu. Does anybody knows how can I enable this feature? Is it removed from this device - or automatically enabled?
Thanks in advance,
Zoleyyou can reset your handset back to factory by turning off the handset, remove battery cover and battery, open handset and hold CTRL+Shift+F and re insert the battery at the same time continuing to hold this key combination down, the nokia logo will show on the internal screen and then it will turn grey and ask if you wish to confirm the format, choose yes and the format will load and the handset will re-boot. Unfortunatly all of your data will be lost but will get your handset working again.
doing this is a little tricky so be prepared to try more than once
Short but to the point. -
Lost CONTACT list after SIM card change requested by operator
Dear All, this is my first post, so please bear with me. I am recurring to this forum to ask for HELP on an issue that is really annoying, specially after spending over an hour with a BlackBerry Support Person who tried many steps to solve the issue without any luck [it was obvious this person did not have the technical expertise to handle the problem at hand]. Here's the story: Last week I received on the mail a new SIM card with a letter indicating I had to replace my "old" SIM card with this new one, after receiving a text message from the operator. On Friday I received the SMS and proceeded with the change. Prior to exchanging SIM Cards, I asked the Call Center Agent if this would cause any problems with my 8520 BB. The answer was NO, all the configuration info remains on the device, and not on the SIM card. Well, this was not the case and some applications lost their configuration: email and contacts. Curiously, the BBM service was unaltered. So I would like to know how can I get back my Contact List? (the email service was quickly and easily reconfigured). Apparently my old Contact list is somewhere in the Device's memory... but a New Contact List has been created after the SIM Card change. I know this because when I press the Call History, all the contacts' info is available ... but when pressing the Contacts Address I can only see 1 contact. Any ideas???? Thank You All.
This is a fun little (and I mean little) problem. Let's walk through it here.
1) Some applications lost email and contact configurations.
A) I'm not entirely sure what you mean in particular as far as the email problem goes. Were the e-mails still set up, but you weren't receiving them? Most likely because the new SIM card contained a new ID number. If you were to go to Options > Advanced Options > Host Routing Tables, press the menu button, and hit Register...that should fix your problem there.
2) BBM Service was unaltered.
A) This is because the BBM service is reliant on the PIN number unique to your device (not your SIM card).
3) Lost contact list, but still showing in the call history.
A) Your call history is just data stored on the device, the only time your contact history is access when sending and making a call is just a simple check to see if you have the information stored already to match a name to it. The data stored in history is it's own entity. I explained this in a slightly confusing manner, but it's slightly irrelevant.
It's entirely possible that your contact list was stored on your SIM card and not to your device. Try this out:
-Insert your old SIM card into your phone
-Open up your contacts and hit the menu button
-Scroll down and select "SIM Phone Book"
-Here you should see the list of contacts if they were truly stored on your SIM and not your phone.
-Hit the menu button again, and choose "Copy all to Contacts"
Once the process is complete, you may reinsert the new SIM card and continue on using the phone as normal.
Hope this helps!
Disclaimer: I'm just a regular user like the rest of you. I have spent a lot of time learning the limitations of the Blackberries to know how to fix most problems. If I have suggested a fix, please give a kudo and mark as a solution! -
Any solutions yet?
"No SIM card installed in the iPhone you are attempting to activate" after updating to iOS 5.
Living in Canada with Rogers service provider.Its an IMEI issue. In my case, about a year ago, after originally purchasing my iP4 from AT&T store, I had a prox. sensor issue. Went to the Apple Store, they replaced the phone. Here is where it all stems from. The IMEI of the new phone was never updated in AT&T/Carriers systems. For iOS updates prior to iOS5, this was not an issue. My phone did its iOS updates along the way with no probs. However, when I updated to iOS5, the firmware did not match the IMEI with what AT&T/carrier had. When I went to Apple Store for the issue about 3 days ago and was given a new phone....again....the new phones IMEI was never updated with AT&T/carrier. I then again attempted the upgrade to iOS5 with the new phone and iOS5 bricked that one also. Today, at the store, we tried 3 replacements with same outcome.
So, after 4 hours and 3 replacement phones with Apple Store Tech (BTW totally gobsmacked), we solved the issue. Luckily, due to iPhone 4S launch, there was an AT&T guy there with a computer tied to the AT&T network to work along with us. The issue is......once the IMEI's on carrier account and phone do not match, iOS5 shuts down the sim card reader within phone.....forever. How to reverse this?......this is a question Apple needs to come up with, because with my case, they have 5 "bricked" phones.
What solved the issue was to get a new phone with iOS4.3.5, new SIM from carrier/AT&T, have carrier/AT&T (in their system) change/match the IMEI to the new phone and activate new SIM. Then, do iOS5 upgrade.
Simple and makes total sense..........however........there is an internal firmware (Apple Security??) issue that bricks the phone once IMEI's dont match.
I am now on iOS5.....no problems......so far. Good luck to all others. -
Can't find vodafone sim card after updating to 5.1.1
I updated my iphone4s OS to 5.1.1 this morning, but it can not find my vodafone sim card today? What's the problem??
i met same problem now! Dx
how you restore with iTune on pc?
cuz after i connect my iphone to pc,
it says "there is no sim card installed in the iphone you are attempting to activate"
and on my iphone,
upper left there keep appear "searching" even i din put in my sim card =(
so wat's the problem? -
My iphone give me an error message saying "
There is no SIM card installed in the iPhone you are attempting to activate.
Problem is my sim card is valid. ( i change for a new few mn agos thinking it was the problem....)
What can i do ?Its an iphone 4 and i precise that this i phone has been totally reboot so you only see the language and country selection to initiate the phone...
-
I having problem keep ask me connect to itunes......can't restore...keep show there is no sim card installed in the iphone you are attempting to activate.....how?
ITUNES show keep show there is no sim card installed in the iphone you are attempting to activate.....how?rajafromcalifornia wrote:
how can i get rid of this error There is no sim card installed in the phone u are attempting to activate please disconnect and a sim card in the phone please help me and my iphone cannot go to menu display can u help me please
You cannot active a phone if it does not have a SIM card in it. Period. End of discussion.
If you get this error and it has a SIM card in the phone then either the SIM card is defective or the phone is defective. Get a new SIM card and try again. If the problem occurs with the new SIM card the phone needs to be repaired. -
please help me < when update my i phone 3G < i finish update but face problem , appear me msg There is no SIM card installed in the iPhone You ar attempting to activate. Please disconnect
Sounds like your phone was hacked to use with your carrier. Updating it has relocked the phone to it's original carrier. You will not get the phone working again without a SIM from the original carrier.
-
Can you put the sim card in without the tray on the iPhone 3GS?
Can you put the sim card in without the tray on the iPhone 3GS?
I don't have the tray, I have ordered a new one but would like to still use my iphone for the next few weeksDon't....wait until you get a tray...never a good idea to rig something up
-
I just got an apple at&t iphone 4 and I have it unlocked. But I want to connect it to t-mobile, so I trimmed my sim card and once the phone was unlocked I inserted the sim and it says no sim, activation error. What can I do to fix this? What is wrong?
JayleneC wrote:
Wait.. Everything on iTunes worked, but when I insert my sim it brings me to the start were I have to choose my language, etc... Then it says activation error.. Are you sure it's the sim card?
As you addressed me that is exactly what I said
Dodgy trimming ?? get a new micro sim from T-Mobile -
I have tried to update my 3GS phone and now it longer works as it comes up with message there is no sim card installed in the phone. Can anyone help please as I am no where near technical support as I am working as volunteer in remote Asian country
Hi Allan,
Thanks for asking, I knew I had forgotten to mention something. The phone was indeed unofficially unlocked, since there were no apple stores or even premium resellers in the region I lived in during the given procedure had to be done.
I understand this could be a further complication, especially the fact the home button does not work. However, I was wondering if there would be a possibility to use a third-party application instead of iTunes to restore the iPhone? IF someone does know of such an application, I could easily solve further problems myself. Basically, the main issue here is my lack of ability to enter DFU mode. -
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. But it got stuck and now my itunes is displaying Error message: "there is no sim card installed in the iphone you are attempting to activate" and my iphone is without service. While i am trying to activate my ihone on wifi also it doesnt saying servers are temporary unavailable try after sometime. Kindly suggest
It sounds a lot like your phone was hacked or jailbroken to unlock it prior to your trying to update it.
If that is the case, it is nowpermanently bricked.
Maybe you are looking for
-
How to get return values from stored procedure to ssis packge?
Hi, I need returnn values from my stored procedure to ssis package - My procedure look like and ssis package .Kindly help me to oget returnn value to my ssis package SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO -- ===============================
-
IPod Touch and iTunes: The Crash of '08
iTunes crashes when I try to sync my iPod Touch. Suggestions? Thanks.
-
Smart cover not working properly after upgrade to iOS7
Since I upgraded my Ipad mini to iOS7 the smart cover stopped working as it was working before. Usually, when I closed the cover the ipad went to sleep and when I opened it the ipad woke up. Is it another problem of iOS7 ? Is there any solution?
-
Hi, I would like to buy a good speaker system for my Laptop. The problem is that I have only one stereo jack output on the laptotp (headphones). I want to buy 5.1 speakers but how I will connect them to the Laptop. There Is need of multichanell sound
-
Db_writer_process and async IO??
we have ORACLE 10Gr2 on Redhar AS LInux server version 4.X. I checked one of database init.ora have following setup: db_writer_processes = 2 filesystemio_options = asynch DISK_ASYNCH_IO = true TAPE_ASYNCH_IO = true Based on what I know "db_writer_pro