Periodically, I will have a page up for a while and then suddenly it will revert back to my Google home page. Why? How do I stop this?

Periodically, when I have a page up for a while, the page will suddenly change to my google homepage. This has happened frequently and with multiple sites.
I can click the back key to the page I was on. It is not a slip of the mouse since most of the time I'm not touching it.
It is as if a home button has been clicked..it moves forward, not back a page.
Why does this happen? How do I stop it from happening?

Bumping

Similar Messages

  • I am a new mac user and have a 15 macbook pro (non retina display).  I am having an issue with safari "freezing" ...it will work fine for a while and then I will open a new tab and attempt a website that won't load and after that it seems no website will.

    So yes like mentioned above...i am a new mac user...have only had it about four days and have had a windows based system always before this.  The issue I am having is that I will be in safari and it will work perfect for a while and then i will open a new tab and attempt another website and it will either be extremely slow or will give the error that it cannot connect to the server, however, when i run diagnostics my internet is fine.  The only solution i have found is to reboot and geeksquad has been unable to replicate the problem while connected to my computer to try to do so.  Does anyone have any suggestions or anyone else with this problem?  If you have a "fix" please try layman's terms because again I have no idea about macs haha.  Thanks, 

    So yes like mentioned above...i am a new mac user...have only had it about four days and have had a windows based system always before this.  The issue I am having is that I will be in safari and it will work perfect for a while and then i will open a new tab and attempt another website and it will either be extremely slow or will give the error that it cannot connect to the server, however, when i run diagnostics my internet is fine.  The only solution i have found is to reboot and geeksquad has been unable to replicate the problem while connected to my computer to try to do so.  Does anyone have any suggestions or anyone else with this problem?  If you have a "fix" please try layman's terms because again I have no idea about macs haha.  Thanks, 

  • My PowerBook G4 says that it's connected to wifi, but it still no internet connection. The connection will work for a while, and then I'll have to run diagnostics and it will work again for a few minutes and then stop working again. What's going on??

    My PowerBook G4 says that it's connected to wifi, but it still no internet connection. The connection will work for a while, and then I'll have to run diagnostics and it will work again for a few minutes and then stop working again. What's going on??

    Basic troubleshooting techniques for any problem
    Restart the computer = joy?
    Reset the router = joy?
    Restart the computer in Safe Mode = joy?
    ask yourself "What changed immediately preceding the onset of the problem?" = Anything... hardware, software, cabling, environment (interference source)
    ÇÇÇ

  • I have Lightroom 6 (not CC) on a Windows machine.  I'm prompted to log into Creative Cloud when I restart my computer (I don't have, use, or pay for Creative Cloud), and then when I launch Lightroom, it tells me to use the application I have to log into m

    I have Lightroom 6 (not CC) on a Windows machine.  I'm prompted to log into Creative Cloud when I restart my computer (I don't have, use, or pay for Creative Cloud), and then when I launch Lightroom, it tells me to use the application I have to log into my Adobe account...AGAIN!  And then to further add insult to injury, I'm prompted to enter in the license number of my product.  I've gone through this process a dozen times now...SCREAM!!!

    Paulou12 what type of a Creative Cloud Membership do you have?  You can find details on how to update Lightroom using the Creative Cloud Desktop application at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
    Finally if you are in a managed environment then please work with your I.T. department to apply the update.

  • Hi. I am running Windows 8.1 on a  64 bit Toshiba Satellite P70-A laptop with 16Gb of RAM. I have installed Adobe Creative Suite 6 - Master Collection. All is fine except for Adobe Acrobat X. It runs OK  for a while, but then suddenly it won't work. I uni

    Hi. I am running Windows 8.1 on a  64 bit Toshiba Satellite P70-A laptop with 16Gb of RAM. I have installed Adobe Creative Suite 6 - Master Collection. All is fine except for Adobe Acrobat X. It runs OK  for a while, but then suddenly it won't work. I uninstall it, re-boot and re-install again, bit the same process repeats itself and once again I have to uninstall and re-install again. I don't know if windows update interferes with it? Has anyone else had a similar problem? Is it fixable?

    I think you'd be much better off asking in the Acrobar forum, Acrobat

  • HT3546 I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to

    I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to do?

    What model and firmware is the 2TB TC?
    What firmware is the AE?
    Does the AE get good signal from the TC in its current location?
    Signal can only be extended that is received intact.
    Is it extending on 5ghz? As I remember it a Gen2 AE is only single band, although you can choose either 2.4ghz or 5ghz.
    I am fairly sure you are going to tell me your TC is AC model..
    I would do a couple of things..
    1. Fix the wireless name, make it short, no spaces and pure alphanumeric.
    2. Fix the wireless channel for 2.4ghz so it is not going to jump around.
    3. Get real results from the AE in its current location for signal strength.. this is really only possible on v5 utility. And that is a double pain with Mavericks because you cannot use it.
    Apple have removed all the useful diagnostics from the airport utility. There is next to nothing left. So you need to use the computer and its diagnostics to find signal levels in the location.
    http://support.apple.com/kb/HT5606

  • Something going seriously wrong with my install of CC. The CC desktop app won't show what apps I have, and when I select that tab the wheel spins for a while and then the app quits. I am running Yosemite 10.

    Something is seriously wrong with my install of CC desktop. The icon won't show up in the upper bar as it always has. When I start it from th finer it starts, but when I select the Apps tab is spins for a while and then quits. Tried re-installing it from Adobe downloads. Same behaviour. What's up?

    Rdgates55 have you utilized the solutions listed in App doesn't open | Progress wheel spins continually?  If so what version of the Creative Cloud Desktop application are you using?

  • I have a factory unlocked 4s I'm haveing trouble with the mms withI have a  straight talk I'm useing the sim card swap with tmoblil sim card I'm following the insructions but it works for a while and then its gone. I've set the settings at least ten times

    I have a factory unlocked 4s I'm having trouble with the mms with straight talk I've been useing the sim swap system with tmobile i have put the settings in five times. The setting won't stay it works for a while and then it's gone. I'm not in a good coverage area but when i put the settings in i make sure i'm getting a good signal or near wifi. any suggestions would be great.

        Congrats on your recent upgrade actionkatie! I am sorry to learn of the difficulties you are experiencing with your Samsung Galaxy S4. Let's get to the bottom of this because we want you to love your phone.
    I understand you have done all necessary troubleshooting steps that should have enabled you to send messages to iPhone users without them having to disable iMessage. Have you tried contacting Apple Support regarding the inability to send a text message to iPhone users? Apple can be reached at (800) 275-2273.
    In addition, do you get a certain error message when your WiFi stops working? Have you verifed that Auto Switch network is disabled? To disable this setting simply to go Settings > Wi-Fi > Tap the Menu Key(to the left of the home button) > Select Advanced and it is called `Auto network switch. If you are still experiencing difficulties, please feel free to reach out to us for further assistance.
    Thank You,
    MichelleL_VZW
    VZW Support
    Follow us on Twitter @VZWSUPPORT

  • Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

    Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

    There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
    1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
    2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
    3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
    4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
    5. Reset the System Management Controller.
    6. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
    7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
    8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to  behave erratically. If you're using such an adapter, disconnect it and test.
    9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
    10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
    11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

  • My brother and I phone number is link together on the same iTunes and Icloud therefore I am getting all his text messages on my phone, how do I stop this? He does not even have an Iphone anymore.

    My brother and I phone number is link together on the same iTunes and Icloud therefore I am getting all his text messages on my phone, how do I stop this? He does not even have an Iphone anymore.

    Try going to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at".   If that doesn't work, you'll have to tap the ID, sign out, then sign back in with a different Apple ID for iMessage.

  • Every time I try to download a game on my iPad it says please verify your account and follow the intrustion now I have a email n password set up and every time I click send it to my email there is nothing how do I acces this pla

    Every time I try to download a game on my iPad it says please verify your account and follow the instructions now I have a email n password set up and every time I click send it to my email there is nothing how do I acces this please

    Hi Mark ohara,
    Welcome to the Support Communities!
    The following articles will help you with your Apple ID verification:
    Frequently asked questions about Apple ID
    http://support.apple.com/kb/HT5622
    Click on My Apple ID to access and edit your account.  You will be prompted to verify your email address.
    Apple ID: Associating and verifying email addresses with your Apple ID
    http://support.apple.com/kb/he68
    I hope this information helps ....
    Have a great day!
    - Judy

  • Each time I open Safari it opens the last web page I was at rather than my home page. How do I stop this from happening?

    Each time I open Safari it opens the last web page I was at rather than my home page. How do I stop this from happening?

    This is part of Lion's Resume feature (I assume you are on Lion).
    A couple of things you can do: System Preferences>General and deselect 'Restore windows when quitting and re-opening apps'.
    Also when you shutdown or restart make sure the following is unticked:

  • HT4352 my aptv2 turns on homesharing when I launch a movie it plays for a while and then it stops and remove my libary

    my aptv2 turns on homesharing when I launch a movie it plays for a while and then it stops and remove my libary from where it should show my playlist any sugestion. it was wifif thoufgt it might be that so i tried ethernet wired and does the same any suggestions my connection is up when it shuts down

    Did you restore to factory defaults/new iPod and sync stuff to your iPod?  If you restore from backup there may be some corruption that is now in the backup.

  • After Downloading v8 I keep getting checking compatibilty dialogue box popping up, then Firfox opens two tabs, Meet Mozilla welcome page and my home page. How can I stop this?

    After Downloading v8 I keep getting checking compatibilty dialogue box popping up when I launch Firefox. Then Firfox opens two tabs, Meet Mozilla welcome page and my home page. How can I stop this?

    That is a legitimate Mozilla newsletter. As it says in the email:
    You're receiving this email because you subscribed to receive email newsletters and information from Mozilla. If you do not wish to receive these newsletters, please click the Unsubscribe link below.
    Unsubscribe https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/
    Modify your preferences https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/ "

  • My macbook from 2008 which I bought used worked fine for 3 weeks and then suddenly it started restarting and now it restarts, goes to grey apple screen and a code saying something about a kernel panic appears and it restarts again and again. Help?

    My macbook from 2008 which I bought used worked fine for 3 weeks and then suddenly it started restarting and now it restarts, goes to grey apple screen and a code saying something about a kernel panic appears and it restarts again and again. Help?

    Restart the computer and immediately hold the Option key down.
    Select the Recovery partition and continue.
    On the next pane, select Disk Utility and continue.
    When DU opens, select your hard drive in the left column, click the First Aid tab, the click Repair Disk.
    When that is done, quit DU and restart in the usual way.

Maybe you are looking for

  • How to stor special characters in a VARCHAR2 field?

    I am trying to store a encrypted string into a 'varchar2' field. But, the encrypted string is not stored properly. Some characters are stored incorrectly. Can anybody help me in storing an encrypted string into a varchar2 field??

  • Using Logical Directory property in Assign File Adapter BPEL

    Hi, I wanted to use The Logical Directory which I created while making File Adapter in a BPEL process in 11g, in an assign activity. How it can be done? Thanks in advance Sharat

  • LAYOUT problems in Pages

    I am new to Pages. I am trying to produce a newsletter and I am having trouble with the layout and column parts. I tried to vary the column width and followed the directions in the pdf manual. But it isn't working for me. I probably need a step by st

  • OraDynaSet not returning the correct number of records.

    Hello All, I am writing VB code in Excel 2007 and retrieving records from a Oracle 9i database. When I run my query from TOAD or any other sql app I get 56 records returned for certain query. However, when I do it from VB in excel and write the value

  • Dynamic approval hierachy process

    Hi, I've a scenarion where I need to develop a BPM process that goes through various approvals in the hierarchy. When a user creates a task, it goes to his/her manager queue. Once the manager approves, the task should go to manager's manager queue an