Periods moving around in hebrew text

Hello,
I am trying to create a tutorial in Hebrew and am
experiencing difficulty.
When pasting text from Word into Authorware, I am having
trouble with the period moving from its correct placement at the
end of a sentence to the right side of the last line of text.
For example, in the source text, the period is placed
correctly as:
.*** *** *** (left side of line)
However, when pasted in Authorware, the period is placed as:
*** *** ***. (right side of line)
Thank you very much for any help you can provide!

tiredmommy wrote:
> Hello,
> I am trying to create a tutorial in Hebrew and am
experiencing difficulty.
>
> When pasting text from Word into Authorware, I am having
trouble with the
> period moving from its correct placement at the end of a
sentence to the right
> side of the last line of text.
>
> For example, in the source text, the period is placed
correctly as:
>
> .*** *** *** (left side of line)
> However, when pasted in Authorware, the period is placed
as:
>
> *** *** ***. (right side of line)
>
> Thank you very much for any help you can provide!
>
I don't know about Hebrew but I never copy directly from Word
to AW. I
copy from Word to Notepad, and then from there into AW.
Andrew Poulos

Similar Messages

InDesign CC (CS7) Scrolling and moving around so slow and choppy!!

Adobe - please send out an update for CC!! Me and IT dept checked my Mac system requirements and all is fine there. Moving around on my pages (e.g. hand tool) and scrolling is so choppy, slow, and lags. And sometimes my art disappears and I'm looking at blank pages until I stop or let refresh for a bit.
I also noticed that when I'm in "preview mode," CPUs go down and much less choppy and smoother moving around, but I can't work in preview mode. (e.g. I need hidden characters on for Indexing markers, and my frames and guides on).
CS6 works MUCH smoother, but I can't save client files down if that's how they provide them to me. Please recommend any other suggestions or hopefully an update will help this issue.

I also hop on the issue to give it some more attention.
InDesign scolling lags badly, Tools are slow, Program crashes. Equal problems using Illustrator/Photoshop.
My Mac is not the newest – but CS6 was running like a charm before.
Some TechSpecs:
OSX Mavericks (Clean Install)
Core2Duo 2.4 GhZ
8GB 1067MhZ DDR3 RAM
OCZ Vertex SSD 256GB
Currently using the Test-Period of CC on this machine to figure out how it works – but that should not be a problem as the Programs are the same. As a student I would prefer the current discount offer (the normal rate is al little too much for me right now). Please fix this problem, otherwise I can't buy it the next year. Btw. Subscription method is great compared to the old payment method.

Hebrew text placement missing characters

When placing text into ID CS6 (8.0) from an RTF file created in Davka Writer 7, I get a lot of pink boxes, all vowels AFAICS. This happens whether I use the ME version or InTools, and on both Windows and Mac. Anyone else had to deal with this?

I think you are exactly right that it is a mapping problem, but it's a puzzling one. The RTF generated by Davka Writer shows up perfectly in Word (on Windows--the Mac has its own problems which I'll leave aside for now). So all the glyphs, including the nikud, are there and are found and correctly displayed by Word.
When the file is placed into an ID document, however, many of the nikud are missing. I have been searching for a work-around with no success so far. Is there some setting in InDesign ME that handles the way text is handled under the "place" command?
We have a 500 page book to lay out, and really don't want to re-type all the Hebrew text, of which there is a lot!
--Leon

Photoshop CS2 redraw garbage when moving around an image window on my G4 laptop

Hi.I recently had to reinstall Photoshop CS2 onto my Mac Laptop 1.5 GHz PowerPC G4, running system 10.4.11, which required a new hard drive after the old one died. I am immediatly encountering a serious redraw/image repositioning problem in Photoshop that I have never seen before, and in Imageready as well. This does not happen in Macromedia Fireworks 8 however.
I am zoomed into an image. Using the hand tool, or the scroll bars or the arrows, as soon as I move an image little messed up line graphic glitches appear and stay in place for the remainder or working with an image, and ultimately covers the image completely after moving around within it a number of times. you can see examples of this in these screenshots I've uploaded:
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage04.gif
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage03.gif
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage02.gif
and the lines stay the same size and position even when zooming in. here's the same image w/ the same defects zoomed out and in:
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage01.gif
http://pixeljam.com/temp/photoshopRedrawGarbage/moveGarbage01_zoomed.gif
I've tried trashing & re-installing photoshop completely, tried running it before the updates needed from the original Photoshop application disk, and after. still the same problem.
This occurs only when using the laptop on its own. When I hook it up to my Apple Studio Cinema Display, it works fine. The problem does not occur on the Cinema Display OR the laptop screen! it's very odd. Basically, the laptop is now something I cannot actually use away from my desk until this is resolved.
Has anyone ever encountered this or possibly have any suggestions or advice? Thanks so much!
-Rich
And here are some more specs on my computer & hardware:
Hardware Overview:
Machine Name: PowerBook G4 12"
Machine Model: PowerBook6,8
CPU Type: PowerPC G4 (1.5)
Number Of CPUs: 1
CPU Speed: 1.5 GHz
L2 Cache (per CPU): 512 KB
Memory: 1.25 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.0f0
Serial Number: 4H5456AZRJ7
Sudden Motion Sensor:
State: Enabled
Version: 1.0
GeForce FX Go5200:
Chipset Model: GeForce FX Go5200
Type: Display
Bus: AGP
VRAM (Total): 64 MB
Vendor: nVIDIA (0x10de)
Device ID: 0x0329
Revision ID: 0x00b1
ROM Revision: 2122
Displays:
Color LCD:
Display Type: LCD
Resolution: 1024 x 768
Depth: 16-bit Color
Built-In: Yes
Core Image: Supported
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Cinema Display:
Display Type: LCD
Resolution: 1680 x 1050
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
DIMM0/BUILT-IN:
Size: 256 MB
Type: Built-in
Speed: Built-in
Status: OK
ATA Bus:
MATSHITADVD-R UJ-845E:
Capacity: 1.72 GB
Model: MATSHITADVD-R UJ-845E
Revision: DMP2
Serial Number:
Removable Media: Yes
Detachable Drive: No
BSD Name: disk5
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
OS9 Drivers: No
S.M.A.R.T. status: Not Supported

Hi. Thanks for your responses. There is definitely some incorrectness in the info I provided about the computer. for the Hard Drive, it's odd.. I copied and pasted that from my system profiler.. In actuality the Hard Drive is 74.53 GB. Not sure how that error occurred.
Also I looked again at the computer's memory. I forgot the second larger 1GB memory card when I was copying and pasting from the system profiler. Sorry about that. I was in a but of a rush to get the question out.
DIMM0/BUILT-IN:
Size: 256 MB
Type: Built-in
Speed: Built-in
Status: OK
DIMM1/J31:
Size: 1 GB
Type: DDR SDRAM
Speed: PC2700U-25330
Status: OK
Another thing I noticed about the problem I'm facing is that it leaves defects from mouse trails as well in the image window. None of the defects are lasting nor will they print. I close the file and they go away, if I zoom, they stay the same size. I'd agree, it sounds like a video card problem, but the reason I posted here is that only in photoshop and imageready do these problems occur. My guess, if it's the video card is that they are just programs that require more of the system. why my video card would be crapping out now, I have no idea. but I guess that's how it goes.
But why would it work fine when hooked up to the apple cinema display? even on the laptop screen itself the problem is not present. only when the laptop is on its own.
The computer has served me very well for almost 3 years without this problem, so that's why it's something that is not a normal problem that should be expected from this computer. I am grateful to have it & can't afford a new one.. this one is still sitting on my credit card balance. Thankfully I am under the applecare protection plan and will bring it in to the local Mac shop on monday and demonstrate the issue to them.
Thanks for your replies.

Not happy with moving around keys on the timeline

I just changed from Final Cut to Premiere CS5.0 and I really like it. Working on a Macbook Pro i5 2.3GHZ, Mac OSX 10.7 But I am not happy with moving around on the timeline. I was used to using the up and down arrows to move to next video edit point, marker point or audio edit point. I tried everything to change it, highlighted the track etc. It only works together with the FN key, which is a bit uncomfortable. And then it definetely is not going to any audio edit points (very annoying!!!) and marker points (have to use Q and W keys). It makes me doubting if continuing with Premiere or not. Its such an esencial and easy to use tool while editing in a normal fast editing rythm. When I change it in the customize keyboard menu, into a Custom keyboard or FCP keyboard, it would ignore my changes on the arrowkeys, although it recognizes any other changes I do. Is it so complicate to change this issue in Premiere to how it is set in FCP? Its such an obvious tool, using the arow keys to move around, cannot beleive that we have to live with such a limitation. Please!!!

Its such an obvious tool, using the arow keys to move around, cannot beleive that we have to live with such a limitation. Please!!!
You dont have to live with that at all if you are fixed only to what you have previously done.
It makes me doubting if continuing with Premiere or not.
There ya go!

I can't sync my ipod to itunes. It looks like it is going through all the steps to sync but nothing happens. The music I moved around is not going where it should

I can't sync my ipod to itunes. It goes through all the steps to sync but it does not sync. The music I moved around does not go where I put it. It shows up in itunes (when changing music around) but does not change it on my ipod. Can someone help me?

Sync Session Failed to Start iTouch iOS5: Apple Support Communities
iphone could not be synced sync session failed to start...: Apple Support Communities
and
Can't connect to the iTunes Store

How to deal with moving around like in gta2?

Hi there,
I'm programming an game but i was wondering how to deal with moving around like in gta2.
my game is also top-down with you(tha player) constantly in the middle of the screen. I know how to deal with button press etc.. but how to calculate how manny pixels the map has to move in the x and y axis...
It's difficult to explain for me.. but hope the picture is clear..
greetings

I was afraid for this one already.. the picture is not clear:) thanx for your response so far.. I will try again.. with the game gta2 in mind:)
see this screenie: http://www.vollversion.de/bilder/705_1_full.jpg
My game looks the same as gta2 top down... with the character in the middle of the screen(the one firing the flame thwower )(the player). if i press up he walks towards the police car.. if i press left or right.. he only turns around(an combination of pressing up and left is also posible) thus the character walks in the direction he's facing.
Now i would like to know how did they do this? how to programm such a movement? Because the character is standing constnatly in the middle of the screen the map has to move like in almost every game... how to calculate the x and y axis movement of the map?
Please.. try agian.. hopefully the screenie will help.

Creating Trendline of 50 Period Moving Average

HI, im trying to plot my graph in LabView and trying to do create a treadline of 50 period moving average like in excel.
is it possible for me to do it in LabView?
i have tried General Polynomial Fit VI and some other VIs in Fittings but cant get anything close to the way i want
any ideas? anyone?
Solved!
Go to Solution.

Charlie, There's a better VI called "Mean PtByPt". Look in the palette "Signal Processing >> Point by Point >> Prob & Stat >> Mean". One added benefit: this VI gives valid data for the first 50 points, even though the mean is not "fully developed" or "stabilized" during the first iterations. (Also, keep in mind that "Delete from Array" and "Build Array" primitives make a call to the memory manager, meaning memory copies for large arrays and fast loop rates will result in a CPU bottleneck. Using circular buffers is one way to mitigate this limitation.)
64864050, try adapting this code to fit your needs:
a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

Arabic and Hebrew text appears in reverse

Arabic and Hebrew text appears in reverse
זה מאוד מפריע פתאום שקורא דבר כזה

Hi There,
Welcome to Adobe Forums.
As such there is no skin specific to RTL in Captivate 8. As of now bullets in quiz cannot be alligned to right . To know more you can refer to the following link : Right to Left Language Support in Adobe Captivate 7 - YouTube
Regards,
Mayank

Windows Crashes with JRE 1.4.2 When Moving around JDialog

Hi!
I work on a Java Applet/application that was originally written to run on java 1.1 -- only AWT that too. Recently I managed to convince my manager (and his manager and his manager) to migrate from the AWT framework on java 1.1 (Microsoft JVM that is ) to Swing/JFC on Sun Java 1.4.2 ... it took a lot of explaining, demostrating, begging, pleading etc., to get this project funded.
Now, my app is all developed in JFC and ready for deployment and during testing found a potential show stopper -- When a Dialog Box or any moveable componant (internal windows etc) is moved around (holding down the mouse on the title bar of a dialog and dragging it around), the OS simply froze up ... nothing could be done other than power cycling the PC. Does anyone know if its a bug in JRE 1.4.2 and if it has been fixed?? This could potentially result in rolling back to AWT :(( .... and of course me looking like a fool in front of my manager!!
..... Please provide any suggestion other than moving to JRE 1.5.x beta. I've also noticed this happening in other Java Applications (Netbeans for example). So, I think this is a major bug the JRE 1.4.2.
A million thanks and few Duke Dollars for anyone pointing me in the right direction.
Note:
1. This problem is not just with my app ... some other java apps that are installed on my workstation (like netbeans) behave the same when Moving Around dialog boxes.
2. The behaviour is very random. But it has happened multiple times (and the very first time my manager run our app on jre 1.4.2)
I would give a million dollars if I had them. But for now, please do with the million thanks and few duke dollars.

Have you tried this on another machine?Yes ... actually this has happened on a few workstations here ... all of them are Pentium IV based dell workstations running Windows 2000.
What exact version of 1.4.2 did you download?Java(TM) Plug-in: Version 1.4.2_04
Using JRE version 1.4.2_04 Java HotSpot(TM) Client VM
Have you searched the bug database? This one could be related to yours:
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4673572
This sounds similar but the difference is its not just the app that feezes up (so that you could do an alt+ctrl+del and kill it)..... the OS freezes up and you can move the mouse around still the system even queu e is not full and eventuall all I hear is the beeping. At this point I've to power cycle.
Is there any way you could post the code or is it too big? Or, have you tried just creating a very small >application or applet that just shows one dialog, and if so, does that show the same problem? (What I'm >trying to get at here is - is it something in your code that is causing this, or something in the JRE, or >perhaps something to do with your machine's configuration/OS?)Unfortunately I cannot post the code ... its company rules and regulations. I've tried creating a very small app and it appears to work ok .... but randomly causes this freeze up. There is no definate pattern (except that it happens when you move around a JDialog or a JInternalFrame) . It could freeze up some time and work perfectly fine at other times. It has actually happened on other applications too (Netbeans, JEdit etc). That's why I suspect this might be a obscure bug in the JRE.
I'll try to find a pattern so that it can be re-produced by everyone.
Thanks for the help.

Why when I am converting a word doc into a PDF are some of the pages moving around. It appears to be

Why when I am converting a 50 page word doc into a PDF using Acrobat XI Pro the pages are moving around.
It appears to be happening in the places where the previous page is not a complete full page, just a half page.
It is moving these pages up into the previous half page, but it is only moving them several lines into that page
Which has totally distored my e-book.
It is attaching all my pattern sheets at the very end of the file okay, etc.

Also, to be more sure you get in the PDF what you are seeing in WORD, go to the print menu and select the Adobe PDF printer, then go back to editing. The is a feature of almost all word processors to reflow the document for best results with the attached printer. It is also one of the problems of using WORD forms that such form designers miss. If you don't like the reflow, many the Adobe PDF printer your default and always print to Acrobat. If you want it to go to a printer, then print from Acrobat to that printer and it should remain intact. The other way to avoid the reflow is to use a layout program like Publisher or InDesign.

IPad mini keeps clicking when open and green bars highlight and keep moving around the screen

MY iPad mini when open keeps clicking and a green bar keeps moving around the screen highlighting things, how do I stop it?

Go to Settings > General > Accessibility > Switch Control and turn this OFF.

Ipad mini screen keeps moving around and switching screens as though someone else is using it? any ideas what is going on?

Ipad mini screen keeps moving around as though someone else is fiddling with it while I am using it. Any ideas what is goi g on?

Hi Deeveeay,
Try resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). When the Home screen redisplays, see if the issue has resolved itself.
Cheers,
GB

I created an album from photos taken off three different cameras. I am sorting the photos manually and when I close iPhoto, the photos move back either by date or by camera import time. How can I keep the photos from moving around?

I created an album from photos taken off three different cameras. I am sorting the photos manually and when I close iPhoto, the photos move back either by date or by camera import time. How can I keep the photos from moving around?

Don't tell us, tell them
http://www.apple.com/feedback/macosx.html is the place for feature requests and feedback

Problems importing Hebrew text

I cut and pasted Hebrew text into MS Word from a Hebrew Word Processing Program (Davka 6). I then imported the text from Word into ID CS4 Standered. In about every third word a vowel sign under a letter dissappeared and was replaced with a box in middle of the word. I tried cutting and pasting from MS Word and got the same result. Does anyone have any suggestions for me? Switching fonts doesn't help. (The font I used is DavidD) Thank you!
Bubby Bella

The only thing that got displaced was the hyphens in the text which
turned into superscripts.
That would be correct. They are called "makaf"s. The correct position
for hyphens (makafim) in Hebrew is at the x-height.
Harbs
http://www.in-tools.com
Innovations in Automation

Periods moving around in hebrew text

Similar Messages

Maybe you are looking for