Peripheral device disconnection

Hi,
in a mesh network, temperature sensing peripheral devices are connected directly via ethernet to the mesh access points.
Sometimes, the peripheral device disconnects even when the access point itself is up and running. At this instance, the interface to which it is connected on the access point still remains up. bridging is configured on the access point with required vlan for the device access.
At times, the device returns back to normal by itself , other times it only gets up after reboot of the access point.
please provide some help on this. thanks in advance.

It's call an Airport Extreme…
http://www.apple.com/airportextreme/
… else an Airport Express…
http://www.apple.com/airportexpress/
Be aware that the Airport Express unit will operate at 802.11g speeds which is much slower than the 802.11n speeds of the Extreme units.

Similar Messages

I want to use my Time Capsule as a central 'hub/hard-drive' in order to keep all my working files in one place. I then plan to use my laptops/desktops as peripheral devices for editing and creation of these files. Is it possible? Create a personal cloud?

I want to use my Time Capsule as a central 'hub/hard-drive' in order to keep all my working files in one place. I then plan to use my laptops/desktops as peripheral devices for editing and creation of these files. Is it possible? To create a personal cloud?
Can someone advise as to whether i can do the following:
                            Future Internet connection -------------------TIME CAPSULE (containing all files) -------------- Backed up on the WD 2T Hard-drive I have
                                  (not connected yet)                                         I                                                          (*connected to timecapsule physically)
                                                                                                        I
                I                                         I                                                I                                                              I                                                I
      Macbook Pro                             iMac                                       HP (PC)                                             OLD Macbook Pro                         iPhone
(used for remote working)       (Used for home working)     (used for heavy CAD and rendering)    (not being used for anything at the moment)        (& iPods)
I am looking to have all my files in one place as i am hopelessly disorganised. I know the online clouds are a good solution (used Dropbox at work and uni for 3 years) however i am wanting to create my own 'dropbox/icloud' at home. So whenever i get back home with my laptop, any work i have been working on whilst out that day is updated to the timecapsule, and then ultimately as i turn on the other devices, they update to those newer versions of the files. Please tell me that the 3TB time capsule i have can do this, otherwise it feels rather overpriced as a wireless storage device?
Another note (to those in the know) If i am to be working on large files (REVIT/SOLIDWORKS/KEYSHOT/CREO/AUTOCAD) - is the timecapsule connection good enough to support editing and updating these files?
I know i may be asking a question that many have before, but as a bit of a technical novice I wanted a clear-cut answer to my specific circumstances. Your help is greatly appreciated.
(*can i use this WD hard-drive that is connected to the Time Capsule as a back up? so that the time machine back-ups/any back ups are also backed up onto this one? can the WD be a backup for the TC?)
Kind Regards
Joe

The diagram was supposed to look more like this......
Internet ---------TIME CAPSULE(containing all files) --------WD 2T Harddrive
                                            I
     I                           I                          I                            I                                   I
Macbook Pro         iMac                 HP (PC)            OLD Macbook Pro           iPhone
Sorry!
Regards
Joe

No sound on my Sony Bluetooth Headset because Windows 7 can't find Bluetooth peripheral device driver

SO, I am dealing this problem for the second day in a row and no working solution still. I own the latest iMac 2014 (though the model is exactly as 2013) 2,7 Ghz with Bluetooth 4.0, I've installed through Bootcamp Windows 7 x64. My bluetooth headset Sony DR-BTN200 http://store.sony.com/bluetooth-headphones-zid27-DRBTN200//cat-27-catid-All-Home -Theater-Headphones (which is on Bluetooth 3.0 and of 2013 year model) is working fine with Mavericks and Yosemite on my MBP, but not working as it should on iMac with Windows 7..
THE PROBLEM: I find the headset, connect it, but afterwards Windows writes that no drivers for Bluetooth peripheral device were found (3 or 4 encriptions like this, so, 3-4 drivers needed). The headset itself guarrantees fine working with Windows 8, the producer doesn't give any drivers to install, you won't find them on Sony's website - it should work as plug-n-play, they say those drivers are preinstalled on Windows 8.
WHAT I'VE TRIED: So, the problem, as I've read from many-many-many sources is common for everybody running Windows on Mac devices. In cases with notebooks it is easy to solve (if you know it) - download the Bluetooth software from Broadcom (the producer of Bluetooth adapters/receivers of Macs) http://www.broadcom.com/support/bluetooth/update.php - install, it finds the devices and istalls correct driver. This worked with my MacBook Pro 2010, on iMac it stucks on recognizing devices - nothing happens next, like it doesn't recognize any bluetooth device. Downloading many other drivers packages didn't help either, nor Toshiba Bluetooth helpers could detect Bluetooth headset to properly download the correct drivers (though it was already recognized by Windows, just couldn't connect properly), nor different other programs like Bluesoleil, Blue manager and so on.
On other notebooks and computers many try to install manually the drivers, usualy Microsoft Windows mobile-based device support. I've tried to install many drivers, all of the Broadcom drivers I've found (including the Broadcom Bluetooth 3.0 USB driver that makes the headset work on MBP), and I must say that Windows recognizes (doesnt show the yellow triangle next to the icon of the driver) only for the Microsoft Windows mobile-based device support driver. Though it's like that, the sound still is not playing out of my headset. On MBP after the drivers were installed, I chose the device in Printers and devices and there was an option of Control (maybe I remember the name wrong), it went first in the right-click menu, and aftewards there was a page were I could connect my headset through ticks/checks on different options. Nothing like this appears if I install any of the drivers on iMac (nor Broadcom, nor Win mobile-based). I must also mention, that some kind of package that I've downloaded from Toshiba or Acer's Broadcom Bluetooth kit, I don't remember, installed some bluetooth drivers (Bluetooth Audio, "receiver" if I recall it correctly and 2 more), that were recognized as right drivers for peripheral device when I connected my headset, but even then - no sound came out of the headset.
HELP ME: What shoud I do? I've tried all of the methods that are on the net. Sony store won't help me out, because the problem is not in the device - it's in the software/hardware of "your iMac". The headset works with Mac OS, should work fine with fully-Windows PCs, it just doesn't with iMacs on Bootcamp Windows. The interesting thing is that updating windows to Windows 8 might also not help, since Sony guarrantees only work on pre-shipped with Win 8 devices, not with the upgraded devices. I do think the problem is with drivers, that Mac's Bootcamp utility doesn't come with pre-installed Bluetooth drivers for connecting Bluetooth headsets, only for the Apple mouse and keyboard. I must also mention that I've tried to install manually many of the Broadcom drivers, all of which were for Bluetooth 3.0 or 4.0, they didn't help.
It's awfull that I've got the latest iMac, so the latest hardware and face such problems. I only think that a cheap 5-7$ bluetooth-usb adapter could help, maybe it could recognize the headset and therefor install its own drivers for its manufacturer. But I don't imagine how would it work and connect since iMac has a peinstalled Bluetooth receiver. Is there a software sollution? An app or driver?

So, finally I found what worked for me: Re: Full Bluetooth functionality in Bootcamp (audio, A2DP, FTP, OBEX) third variant, none of first 2 worked.. The only trouble was to find the correct link since on Acer site there is no download link. I've googled for "Bluetooth_Atheros_7.4.0.96_W7x64_A.zip" since this is the archive the guy is actually talking about. The 4th link on google was http://www.laptop-software.com/Acerdriversdownload.php?GDFiles/Driver/Bluetooth/ Bluetooth_Atheros_7.4.0.96_W7x64_A.zip?acerid=634556349384706773&Step1=Notebook& Step2=Aspire&Step3=Aspire%204830Z&OS=721&LC=en&BC=Acer&SC=PA_6 and I chose to downlad from the first download link. Then the steps are:
1) unzip the folder
2) don't look for x64 or x32, there is only a one installer called "Bluetooth_Suite_win7"
3) install Bluetooth_Suite_win7
4) after it installs Windows starts downloading and recognizing drivers, I don't know how it actually works, but it also downloaded and recognized the unrecognized before drivers for my Bluetooth headset.
5) Restart Windows
6) Turn on headphones - they connect automatically, everything works and works great, the quality of sound is exactly the same as it was on Mac OS, nothing that would bother me.
****, it took me 2 full days... finally...

Windows Vista claims for "Bluetooth Peripheral Device" driver

When I connect my iPhone via bluetooth to my computer for "tethering", Windows Vista claims for "Bluetooth Peripheral Device" driver and i can´t connect.
Where is the driver? Anyone knows it?
Thanks!

My Mac Book Pro decided to update with windows update ... I lost bluetooth and when my machine started up it said found new hardware ... and proceeded to look for the driver BCM2046A ... its not on the Mac Discs nor on the XP Disc ...
I searched and searched and searched ..bump
I then found this link download and use ... and pass on ....
http://www.broadcom.com/support/license.php?file=SetupBtwDownloadSE.exe

The USB port on my 4th generation Airport Extreme does not recognize any peripheral devices whatsoever. In other words, it does not function at all. What can I do?

I have had my Airport Extreme for almost a year now. I have not been able to get it to work. It has never worked. I have tried everything in the apple manuals, my peripheral device manuals, and online help. My Airport Extreme Base Station has a completely dead USB port. The USB connector does have voltage and ground. Apparently there is no data transfer. I do not know how to test the data pinouts. I don't know if it is a software or driver problem, or if it is a hardware or wiring problem. My computer is a mid-2009 13" MacBook Pro. All of my external devices work well with the MacBook Pro. The USB functionality on the MacBook Pro has always performed without a glitch. It seems the problem with the Airport Extreme must either be a network communication problem or a hardware/hardwire problem. I bought the Airport Extreme to build a home inTRAnet network. I have a seperate 3rd party router for inTERnet. Contrary to what the manuals declare, the initial setup of my Airport Extreme requires inTERnet setup during the process. Even when the choice is made to limit the network access to LAN only, when I reach the end of the setup process, a prompts reads that the Airport Extreme may not function because I have not set it up for inTERnet with the WAN. Well, Dah... during the intial stages of the setup I told the machine to configure an inTRAnet only LAN setup. So... I went ahead and set it up for inTERnet and WAN. Either way, the USB port is not working. Then I set it up for the whole package, WAN, LAN, and everything. Still... no function out of the USB port. Any ideas?
P.S. The Ethernet works and so does the 802.11 tranceiver. The USB port is the only problem, but a major, major one for my needs. There is no peripheral functionality.

Okay so I figured it out. I inherited the Configurator already set up so I didn't realize that our former administrator was brilliant and set things up a little differently. To anyone else who finds themselves in this spot try this:
After you plug the iPad in and open Configurator instead of trying to 'Prepare' the device click 'Assign'
There should be groups of Users listed on the left hand side of the screen.
Select the group you want the ipad to be a part of, or make a new group. ***Note a group can be one person so this is a good feature for teachers to have individual app assignements for students.
After you select the user group click the little plus ( + ) button on the bottom of the screen under the second column of info where names and device serial numbers should appear.
Type the name of the person, group, whatever you want to identify that assignment by into the blank that pops up after you hit the plus ( + )
Then select the assignment you just made and tohe 'Check Our' button at the bottom. At this point a box will pop up with a window at the top listing all devices supervised by Configurator. There is a tiny down arrow button that opens a scroll down menu to the right of this box. Click that, then select the device connected by USB as the one to assign.
The name of the assignment you gave it will show on the lock screen now and you can assign apps and profiles to the device like you would any other device in your Configurator inventory.
Good Luck.

Closed-lid mode USB devices disconnect randomly

I just recently connected my MacBook Pro to my Samsung DLP HDTV and started running it in closed-lid mode so my TV is the primary/only display. I also have an external hard drive (USB), external mouse (wireless with USB toggle) and the new Apple bluetooth keyboard.
The problem I have isn't entering the closed-lid mode. But once in closed-lid mode (after a short period of time) all of my USB devices disconnect and then reconnect. I know this because I get an error saying that my hard drive was removed improperly (please eject before disconnecting, etc) and I also get a message from my mouse software saying that my mouse has been disconnected. But then they reconnect themselves (hard drive shows up again on desktop and mouse software informs me that the mouse is present again).
Has anyone had this problem before where USB devices disconnect in the closed-lid mode? I just upgraded to Leopard (formatted the drive and started from scratch). I never tried this within Tiger so I don't have that for a reference. This is really annoying because I have my entire music collection on the external hard drive and it just stops playing when this happens and I have to restore the path to my music collection within iTunes' preferences (it defaults back to ~/Music/iTunes/ when it figures out that the hard drive is no longer there).
The strange thing about this is that when I don't run in closed-lid mode this never happens. I'll be more than happy to provide more details if needed. I greatly appreciate your help.
Thanks!
Mike

i appear to have the same problem under Vista (via Bootcamp) on MBP (2007). i close the lid, and 5-20min later i hear the sound a USB device makes when it disconnects, and a minute or 5 later it reconnects. i don't actually have any USB devices plugged in, but there are several components in the MBP that are connected internally via USB (DVD drive, etc).
what's almost as annoying is that the LCD backlight will come back on of its own accord, even though the MBP's been idle for more than the LCD/backlight time-out period. after the next idle timeout it turns off, only to turn back on againa while later. i see this under OSX & Vista.

Terminal command to refresh USB peripheral device

I'm running OS 10.7.5, and I have a recurring problem with the USB ports on my Mac mini. After several days of up-time, one or more of the ports will sometimes become non-responsive. This seems to be software related, because logging off and logging back into the machine always fixes the problem (as does a restart and a cold-reboot). I was thinking maybe the "checklist" of device filenames somehow gets corrupted over time, and needs to be recreated.
Does anyone know how to refresh the list of peripheral devices without restarting, rebooting, or logging off? Ideally a terminal command? I'm hoping not to have to keep shutting down the session each time this happens to get my list of connected devices back.
Thanks very much for your suggestions for the newbie.

Hi Korby,
If you are having difficulties with USB devices such as you describe, I would suggest resetting your Mac mini’s parameter RAM, as described in this article -
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Specifically -
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Thanks for using Apple Support Communities.
Best,
Brett L

All iOS devices disconnecting randomly from D-Link router

Hi,
All my Apple devices disconnect every 10 to 15 minutes from my D-Link DIR-615 router. My Apple TV, 2 iPhones and my iPad always lose the connection. Can't stream anything on my Apple TV, I have to reset the router every 10 minutes. This happens only on Apple/iOS devices. My 3 PCs and my Samsung Galayx device don't have these problems, never disconnect and can stream for hours with no problems.
All my Apple devices are up to date. My router has the latest firmware. I have tried to change the channel and channel width to different settings with no luck.
Any idea on how to solve the problem? Changing my router to an Apple AirPort is not an option. The fact that only Apple devices are concerned is certainly not an accident.
Thanks in advance!

Settings > General > Reset > Reset Network Settings
Restore the router to default settings and reconfigure.

Intel Mini DVD+RW re-burns fail: 4/03/00 Hardware Error, Peripheral device

I can't re-write DVD+RW discs on my Intel Mini. The log says:
Backup: Burn sense: 4/03/00 Hardware Error, Peripheral device write fault
Backup: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.
It happends with every Philips 4x DVD+RW I have after first burn. Also the log says it is trying to burn at 47x speed. Could this be why it is so noisy - it spins up like a rocket at 5 second intervals and then the disks can't be ejected.
Backup: Requested burn speed was 47x, actual burn speed is 4x.
Is this a sign of a bug or just an optimistic Backup?

I'm 99.99% sure this is an Intel Mini Superdrive problem now. I think it is incompatible with the Philips DVD+RW media. I will try to get new +RW media soon and see if I get joy with other formats.
I have taken the exact same media from the same pack and I can burn > erase FIVE times on the same disk, and not a single problem yet on my PPC G4 mini. I can only dream of doing this cycle once on my Intel Mini.
Intel mini (OS X 10.4.7) has:
Vendor Product Rev
MATSHITA DVD-R UJ-846 FM3J
PPC (OS X Server 10.4.7) mini has:
Vendor Product Rev
MATSHITA DVD-R UJ-845 D8PB
What's more the PPC mini makes almost zero noise, only one burst of quier "roar" near the start of erase. Contrast this to the constantly 5s roaring cycle that makes you raise your voice on the intel mini.
I believe my Intel Mini is either faulty or there is a firmware issue with the drive.
Can somebody else try Philips 4x DVD+RW discs in an Intel Core Duo and report their drive info?
Thanks in advance

Bluetooth Peripheral Device driver failure in Windows Vista

I've linked my computer and my Palm Centro using a Bluetooth connection and now I keep getting an error message that says...
"Device driver was not successfully installed...Bluetooth Peripheral Device - Failed"
It tries to search the computer to find the driver and when it can't it asks me to put in the CD that came with the phone. I do that and it still can't find the driver.
Does anyone know where I can find this mystery driver??? Please help!! Thanks
Post relates to: Centro (Sprint)

I am having the same problem with a new RocketFish Bluetooth adapter. I did NOT have this problem when I was using a Kensington USB Bluetooth adapter. One big difference that I notice between the two adapters is that the Kensington adapter came with an updated version of the Toshiba Bluetooth Stack software which contained its own DUN drivers. However, the new RocketFish Bluetooth 2.0 EDR USB adapter does not seem to work with the Toshibal BT Stack.
Maybe this helps. Maybe it doesn't. Either way, I don't care. It's how I roll. I'm a smart ass.
I will check back for any additions to this thread. I hope we can figure it out! I will also post more Prose of Indifference.
Post relates to: Centro (AT&T)

Bluetooth Peripheral Device driver failure in Windows Vista and Windows 7 (solved)

I had problems setting up Bluetooth HotSync. Following the directions for pairing the device resulted in a "Bluetooth Peripheral Device" missing driver in Device Manager. I finally figured out how to setup HotSync and am able to sync over Bluetooth to Windows 7 64-bit.
On the PC
Right-click on the Bluetooth icon and select Show Bluetooth Devices
Delete the Palm Phone
Right-click on the Bluetooth icon again and select Bluetooth settings
Turn Discovery on for the PC
On the Palm Device
Select Bluetooth
Turn Bluetooth On
Set Visibility to Hidden (if desired)
Select Setup Devices on the Bluetooth screen
Select HotSync Setup
Click Next
Select your PC
This is the important part: Click Next 3 times (don't do what the screens tell you -- just click Next, Next, Next)
Click Launch HotSync
Viola!
On the PC
Right-click on the Bluetooth icon again and select Bluetooth settings
Turn Discovery off for the PC (if desired)
Post relates to: Centro (AT&T)

I am having the same problem with a new RocketFish Bluetooth adapter. I did NOT have this problem when I was using a Kensington USB Bluetooth adapter. One big difference that I notice between the two adapters is that the Kensington adapter came with an updated version of the Toshiba Bluetooth Stack software which contained its own DUN drivers. However, the new RocketFish Bluetooth 2.0 EDR USB adapter does not seem to work with the Toshibal BT Stack.
Maybe this helps. Maybe it doesn't. Either way, I don't care. It's how I roll. I'm a smart ass.
I will check back for any additions to this thread. I hope we can figure it out! I will also post more Prose of Indifference.
Post relates to: Centro (AT&T)

Flex Peripheral Device Support

I'm trying to decide whether Flex is the right tool for me on
a new development project I'm thinking about. I have a couple of
requirements that I'm not sure if Flex will be able to meet. It's
also possible that a combination of technologies with Flex may
solve my issue. It is also possible that what I am trying to
achieve is outside the boundaries of a web flex application.
I would like to create a web application that also has the
ability to utilize the Windows API. I am also interested in
controlling peripheral devices like, cameras, pin pad devices,
biometric devices, scales, and barcode readers. I have not been
able to find anything on the internet regarding these questions.
I also cant seem to find a report generator for Flex.
Normally a development environment like Delphi or VS includes some
type of report writer. Is there some kind of report writer for
Flex?
Any help would be very much appreciated.

Does anyone have any advice here? I can't be the only one
trying to attempt
this. Any advice would be greatly appreciated.
- StinkyDuck
"msmughal" <[email protected]> wrote in
message
news:fmkcl5$ld7$[email protected]..
> I'm trying to decide whether Flex is the right tool for
me on a new
> development
> project I'm thinking about. I have a couple of
requirements that I'm not
> sure
> if Flex will be able to meet. It's also possible that a
combination of
> technologies with Flex may solve my issue. It is also
possible that what
> I am
> trying to achieve is outside the boundaries of a web
flex application.
>
> I would like to create a web application that also has
the ability to
> utilize
> the Windows API. I am also interested in controlling
peripheral devices
> like,
> cameras, pin pad devices, biometric devices, scales, and
barcode readers.
> I
> have not been able to find anything on the internet
regarding these
> questions.
>
> I also cant seem to find a report generator for Flex.
Normally a
> development
> environment like Delphi or VS includes some type of
report writer. Is
> there
> some kind of report writer for Flex?
>
> Any help would be very much appreciated.
>

Accessing peripheral devices using NetWeaver Mobile 7.1 application

Hi,
I'm developing an occasionally connected application for handheld devices using NetWeaver Mobile 7.1. From my application how can I access other peripheral devices (for example: WebCam) to capture the pictures.
Suggest me the ways to access the peripheral devices (WebCam) from my NetWeaver Mobile application.
Thanks in advance.
Regards,
DVR.

Hi Vinodh,
Please refer to SAP Note: 1057759 for getting the list of peripheral input/output device drivers supported in SAP Netweaver Mobile 7.1
You can also go through the help portal link on how to use peripheral devices in mobile application.
http://help.sap.com/saphelp_nwmobile71/helpdata/en/8F/0B674240449C60E10000000A1550B0/frameset.htm
In case you want to use another peripheral device like Webcam not supported, then you will have to take care of this in the application code itself. You can use JNI etc to talk to drivers like in a normal java application.
Regards,
Nipun

Device Disconnect Sound Plays Sporadically

Hello my Toshiba Satellite L675-57115, Windows 7 (browser Internet explorer 9.0.8112.16421) plays the device disconnect sound randomly while I'm surfing the Internet, with no seemly pattern that I am able to discern. At times the sound will play several times back to back and then it will be a few minutes before it plays again.
I'm not sure if this is related but when insert addresses (in yahoo mail) is clicked it does nothing. It will not go to the addresses. It also will not go to some sites that have addresses within a site when addresses are clicked on. When the address is clicked on it does nothing, but "open in a new tab" will work.
I would appreciate any help/advice from the knowledgeable Toshiba Forum posters.

I have no idea what could cause that, Doc, but if it were me and no problem was being caused, I would right click the speaker icon in the System Tray (AKA Notification Area), click Sounds, select Device Disconnect, click on the down arrow and select None, click Apply and OK out.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Satellite C850-B519 - Bluetooth peripheral device not found

I have Satellite C850-B519 notebook serial no. 9c287842r from egypt where i live but after downloading bluetooth drivers from toshiba website and installed i got that *"bluetooth peripheral device"* couldn't be found .....also when installing toshiba bluetooth stack it gives me that screen ( it's the jpg link ) and make no progress even i left the notebook installing for 3 hours without any progress
Please answer me i'm sick of it

> and already installed realtek waln driver in addition to realtek bluetooth filter package
As I said: Realtek WLan driver -> Realtek BT filter package + Toshiba BT stack
Here you can get the BT stack:
http://aps2.toshiba-tro.de/bluetooth/
Finally you have to enable the BT using F12 (or Fn + F12) to finish the installation!
> my friend has a toshiba c850 with win 8 installed but bluetooth stack have my problem .....i don't know what the hell is wrong with c850 series
First of all not all Satellite models supports Bluetooth. In case the BT isnt supported, you could not install BT drivers and BT stack!
Furthermore the Satellite C850 series is equipped with different modules (Atheros, Intel or Realtek). Usage of wrong drivers leads to the same error.

Peripheral device disconnection

Similar Messages

Maybe you are looking for