Permanent up/down link between host fiber card and fiber switch
During connecting emc symterix to ORACLE VM machine with ECC there is instability of connection as described here:
Description: Switch switch31 Slot 3, Port 4 Linkdown. Reason: None
Severity: CRITICAL
Server Timestamp: Mon Jul 26 17:39:26 IDT 2010 Agent Name: Fibre Channel Connectivity Agent Agent Timestamp: 2010/07/26 17:39:08 Alert Name: Port Link Status Changed Alert ID: 534 Host Name: zil01app15.ds.mot.com Canonical Managed Object Name: Connectivity Device=2000000dec6d6280>Connectivity Port=2084000dec6d6280 Managed Object Persistent Id: [com.emc.ecc.dl.persistent.topology.ConnectivityDevFibrePort,3369032]
Description: Switch switch31 Slot 3, Port 4 Linkup
Severity: NORMAL
Server Timestamp: Mon Jul 26 17:39:28 IDT 2010 Agent Name: Fibre Channel Connectivity Agent Agent Timestamp: 2010/07/26 17:39:08 Alert Name: Port Link Status Changed Alert ID: 534 Host Name: zil01app15.ds.mot.com Canonical Managed Object Name: Connectivity Device=2000000dec6d6280>Connectivity Port=2084000dec6d6280 Managed Object Persistent Id: [com.emc.ecc.dl.persistent.topology.ConnectivityDevFibrePort,3369032]
link is going up and down
any idead what can it be ?
Regards
Victor
we also tried the following:
2. We compared OS/driver versions on both ( Oracle VM and Oracle Linux ) machines.
Here is the table:
Hostname OS HBA version
zil01gscapp01 Oracle VM server release 2.21 8.03.00.10.02.02_k
zil01gscmgt01 Oracle Enterprise Linux release 5.5 ( Carthage ) 8.03.01.04.05.05_k
From this comparison we concluded that VM server HBA driver should be upgraded.
We have downloaded from the QLOGIC site driver version 8.03.01.06 ( see the link )
http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/SearchByProduct.aspx?ProductCategory=39&Product=937&Os=65
By installing driver we got following error:
[root@zil01gscapp01 qla2xxx-src-8.03.01.06.05.06-k]# ./extras/build.sh install
case=install here2 main
QLA2XXX -- Building the qla2xxx driver...
drv_build modules
RedHat 1 make -j5 -C /lib/modules/2.6.18-128.2.1.4.25.el5xen/build M=/tmp/qla2xxx-src-8.03.01.06.05.06-k modules
make: Entering directory `/usr/src/kernels/2.6.18-128.2.1.4.25.el5-xen-i686'
make: *** No rule to make target `modules'. Stop.
make: Leaving directory `/usr/src/kernels/2.6.18-128.2.1.4.25.el5-xen-i686'
/lib/modules/2.6.18-128.2.1.4.25.el5xen/kernel/drivers/scsi/qla2xxx/qla2xxx.ko
QLA2XXX -- Installing the qla2xxx modules to /lib/modules/2.6.18-128.2.1.4.25.el5xen/extra/qlgc-qla2xxx/...
install: cannot stat `*.ko': No such file or directory
It looks like there is no kernel source in order to compile with the new driver, in other words Oracle VM comes wihout kernel source.
Please, your advise/opinion about all above activities and further work.
Similar Messages
-
HT3702 how can i get rid of the link between my credit card and itunes?
i initially linked my credit card to my itunes account as i thought it would be easier to download songs. but now whenever i go to update an app on my phone it tells me i need to support billing details so i re enter them and it tells me that i am wrong and i cant update my apps? even when they are free?
is this because there is no money in my account or what? and how do i get rid of the assosiation with my card and itunes?You have to create a new Apple ID by following the steps in this article: http://support.apple.com/kb/ht2534.
-
Link between A/R Invoice and the A/R credit memo
dear all
how do we find the link between A/R invoice and it's credit memo from the database level.
Thanks & Regards
Kanishka WickramaHi
You can link AR Invoice and AR Credit memo through internal reconciliation for that customer.
Go to banking --> bank reconciliation --> Automatic Reconciliation --> internal reconciliation.
Regards
Kamlesh Vagal
Edited by: kamlesh vagal on Jul 21, 2008 10:59 AM -
Link between schedule Line Number and Delivery
Is there a link between Schedule line Number and Delivery number ?
Eg. Line item 10 with quantity 100.
has 5 schedule lines..with 5 different delivery dates.
1 . quanity 40
2. quantity 30
3. quantity 20
4. quanity 6
5 quantity 4
For schedule line 1, 2 deliveries were created,
one with quantity 20
another with quantity 15
quantity 5 is still not delivered.
also schedule lines 2,3,4 and 5 are fully delivered.
Is there any table, FM etc in SAP which will give me the link between the schedule line and delivery number ?
Total deliveries created : 6. - But which delivery corresponds to which schedule line ?
Please dont tell me to look VGBEL and VGPOS.. that will just give line item number 10.. I need to get the schedule line number.
Also, RV_SCHEDULE_CHECK_DELIVERIES --> will give me the delivered quantity against each schedule line.
My purpose is to create an ontime delivery report .
a report which list each schedule lines, and tell, how many shipments were late/ontime/early etc..
and for Late ones, how many days late has to be found.
this is where i need the delivery.
No. Of days Late = Actual GI Date - Planned GI Date.
Actual GI date is in the delivery.
Any suggestions ?
Thank you in advance.Hi,
Check in the below link.
relation between VBEP-ETENR and LIKP-VBELN
Thanks,
Sree. -
How do i remove the link between my apple ID and my mobile number?
i decided to move away from iPhone a couple of days ago as a result of renewing my contract. When I got my new phone, I factory re-set it and handed it in to my network provider as part of a recycling scheme. Since getting my new phone, when people send me texts they are still sending as iMessages. I have logged onto my iTunes and removed my iPhone from the account but still nothing. How do I completely remove the link between my mobile nuber and iMessenger?
Contact Apple support to deactivated iMessage: https://www.apple.com/support/appleid/contact/
-
Link between G/L Account and profit center
Hello dear all,
I have an issue in Intra-company process.
I made 2 customer payment for 2 different company code:
1/ Company 1000: i have 2 line items posted (in G/L View)
2/ Company 2000: For the same Cash account and the same customer account used in my first case (with company 1000) i have 4 line item posted in the G/L view and with different " PARTNER PROFIT CENTER"
I do not know wher can i find in customizing the link between G/L Account and Profit center ?
Thank you in advanceThe document splitting is active in your company, at the same time, the "zero balance" for profit center is activated in your doc split characteristics. In order to balance the profit center in General View, it creates another line item for balancing it which is the zero balancing account or split the cash account according to profit center assignment. For some cases, they are split equally that is why it is best that you assign the profit center in the cash account upfront and create line item for each payment with different profit center assignment.
For instance, there are two customer line items with different profit center assignment
Customer Line Item 1 = Assigned to Profit Center 2000 amount 500
Customer Line Item 2 = Assigned to Profit Center 3000 amount 500
When I post a payment of 1000, the Entry View is
Cash 1000
Customer 1000
GL View
Cash PC 2000 500
Customer PC 2000 500
Cash PC 3000 500
Customer PC 3000 500 -
Link between Credit Risk Category and Terms of Payment
Hi,
Is there a link between the Credit risk category and the terms of payment. Where can we maintain this.
For instance, if risk category is x, the top is a, risk category is y, top is b.
Please suggest.There is no link between credit risk category and Terms of Payment. The Risk Category is assigned to credit limit of the customer which determines if it will be blocked at certain level for sales transactions or just a warning message that the customer is over the limit. For the terms of payment, it just determines when it's due or whether it's overdue or not.
-
Link between Service Entry Sheet and Material Document
Hi
I am busy with developing a report where i am required to find the link between the Material Document and Service Entry Sheet.
I am aware that on the Purchase Order Data tab of the Material Document has the service entry sheet number and line item. However the problem I have picked up here is in the event I create a Service Entry Sheet with a service in line 1 and for some reason Delete that Line and then capture the service again, it is saved in table ESLL as line 2. This is correct. However when I have a look at the material document, it references it as line 1 of the service entry. Is there any way to get this in sync?
Thanks
VineshThanks
This table does show the service entry sheet number and line item however the line item does not correspond with the line item on the service entry sheet.
Eg.
I create a service entry sheet where I capture a service in line 1.
I delete Line 1
I recapture on line 2.
Post Service Entry
The Material Doc reference document is the service entry however the line item for the reference is 1.
I need to try and link the line items
Thanks
Vinesh -
Technical link between a PM order and its operations (routing number)
Hi all,
I would like to know how to make link between a PM order and its routing number for operations in the order (field AUFPL) ?
Thank you.
Regards.
Laurent.Hi again,
I just found function module CO_DB_HEADER_READ.
With Order Number as import parameter you got in export parameter CAUFWA value AUFPL.
Then with +AFV+* tables, you have operations data.
Regards.
Laurent. -
How to get the link between mara, ausp, cawn and cawnt tables
hello ABAPERS
i have got a requiremet in that i have to get the relation .
how to get the link between mara, ausp, cawn and cawnt tables and also type how can we get link between char value and char description in cawn and cawnt tables through ausp and mara tables.
I would be very thankful for ur help in advance.
Thanks & Regards.
soniHi,
Sample report using the linkage between tables;
report batch_char no standard page heading
line-size 132
line-count 58(1)
message-id mm.
Report by Batch Characteristic *
Description : Report by Batch Characteristic *
Declaration for Tables
tables: mara, " Material Master
mard, " Storage Location Data for Material
t001w, " Plants/Branches
t001l, " Storage Locations
cabn, " Characteristics
inob. " Link between Internal Number and Object
Declaration for Constants
constants : c_klart like ausp-klart value '023', " Class Type
c_obtab like inob-obtab value 'MCH1', " Database Table
c_flag type c value 'X', " Flag
c_c23 type i value '23', " Ratio
Constants for Ratio Categories
c_13 type p decimals 2 value '13.00', " For Ratio 13
c_1499 type p decimals 2 value '14.99', " For Ratio 14.99
c_15 type p decimals 2 value '15.00', " For Ratio 15
c_1699 type p decimals 2 value '16.99', " For Ratio 16.99
c_17 type p decimals 2 value '17.00', " For Ratio 17
c_1899 type p decimals 2 value '18.99', " For Ratio 18.99
c_19 type p decimals 2 value '19.00', " For Ratio 19
c_2099 type p decimals 2 value '20.99', " For Ratio 20.99
c_21 type p decimals 2 value '21.00', " For Ratio 21
c_2299 type p decimals 2 value '22.99', " For Ratio 22.99
c_23 type p decimals 2 value '23.00', " For Ratio 23
c_g23(4) type c value '>=23', " For Ratio >=23
c_ratio(5) value 'RATIO', " For Ratio
Constants for Storing Selected item field information
c_cursor1(15) value 'I_OUTPUT1-MEINS', " For Selected Base
" Unit of Measure
c_cursor2(15) value 'I_OUTPUT1-MATNR', " For Selected Base
" Material Number
c_cursor3(15) value 'I_OUTPUT1-MAKTX', " For Selected Base
" Material Des.
c_cursor4(15) value 'I_OUTPUT1-CLABS', "For Selected Base
" Stock Value
c_cursor5(15) value 'I_OUTPUT1-ATFLV', " For Selected Base
" Char.Value (Ratio)
c_cursor6(5) value 'C_G23'.
Declaration for Global Variables
data : g_exit type c, " Flag
g_clabs1(16) type c, " Quantity
g_clabs(18) type c, " Quantity
g_cursor(15) type c, " Cursor field name
g_matnr type mara-matnr, " Material Number
g_werks type mchb-werks, " Plant
g_atinn(30) type c. " Character.
Declaration for Internal tables
Internal table to hold Batch Stock data
data : begin of i_mchb occurs 0,
matnr like mchb-matnr, " Material Number
werks like mchb-werks, " Plant
lgort like mchb-lgort, " Storage Location
charg like mchb-charg, " Batch Number
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Unit of measure
atflo like ausp-atflv, " Char.Value (Ratio)
atflv like ausp-atflv, " Char.Value (Ratio)
end of i_mchb.
Internal table to hold Secondary List data
data : begin of i_mchb1 occurs 0,
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
lgort like mchb-lgort, " Storage Location
charg like mchb-charg, " Batch Number
atinn like ausp-atinn, " Char.Value
clabs like mchb-clabs, " Stock Value
atflo like ausp-atflv, " Char.Value (Ratio)
atflv like ausp-atflv, " Char.Value (Ratio)
end of i_mchb1.
Internal table to get the Plant Name
data : begin of i_plant occurs 0,
werks like t001w-werks, " Plant
name1 like t001w-name1, " Name
end of i_plant.
Internal table to get the Material Description
data : begin of i_makt occurs 0,
matnr like makt-matnr, " Material
maktx like makt-maktx, " Description
end of i_makt.
Internal table to hold AUSP data
data : begin of i_ausp occurs 0,
objek like ausp-objek, " Object No
atinn like cabn-atinn, " Characteric value
atflv like ausp-atflv, " Characteristic Value
end of i_ausp.
Internal table to hold output data
data : begin of i_output occurs 0,
atinn like cabn-atinn, " Characteric value
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
atnam like cabn-atnam, " Characteristic
atflv like ausp-atflv, " Char.Value (Ratio)
name1 like t001w-name1, " Plant Description
maktx like makt-maktx, " Material Description
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Base Unit of Measure
end of i_output.
Internal table to hold final Output data
data : begin of i_output1 occurs 0,
atinn like cabn-atinn, " Characteric value
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
atnam like cabn-atnam, " Characteristic
atflv(32) type c, " Char.Value (Ratio)
name1 like t001w-name1, " Plant Description
maktx like makt-maktx, " Material Description
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Base Unit of Measure
end of i_output1.
Selection screen
selection-screen begin of block b1 with frame title text-001.
select-options: s_werks for t001w-werks obligatory, " Plant
s_lgort for t001l-lgort, " Stor.Location
s_matnr for mara-matnr obligatory, " Material No
s_atinn for cabn-atinn. " Character.
selection-screen end of block b1.
At selection screen
at selection-screen.
Validation of Selection Screen Fields
perform validate_screen.
Start of selection
start-of-selection.
Get the Material and Batch Stock data from MARA and MCHB Tables
perform get_mat_stock_data.
Get the Material Group Text and Plant Name from T023T and T001W Tables
perform get_plant_grp_data.
Append the data into final Output Internal Table after getting the
Characteristic Values data from INOB and AUSP Tables
perform append_final_data.
Processing if the Characteristics contain 'RATIO'
perform collect_ratio.
End-of-Page
end-of-page.
write /1(125) sy-uline.
End of selection
end-of-selection.
if g_exit <> c_flag.
Display the Report Output data
perform display_report.
endif.
Top-of-Page
top-of-page.
Write the Report and Column Headings
perform get_headings.
at line-selection
at line-selection.
if sy-lsind = 1.
perform display_batch.
endif.
Top of page during line-selection
top-of-page during line-selection.
perform heading_seclist.
Form validate_screen
Validation of Selection Screen fields
form validate_screen.
Validation of Plant
clear t001w.
if not s_werks[] is initial.
select werks
into t001w-werks
from t001w
up to 1 rows
where werks in s_werks.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Plant'(002).
endif.
endif.
Validation of Material Number
clear mara.
if not s_matnr[] is initial.
select matnr
into mara-matnr
from mara
up to 1 rows
where matnr in s_matnr.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Material'(003).
endif.
endif.
Validation of Storage Location
clear t001l.
if not s_lgort[] is initial.
select lgort
into t001l-lgort
from t001l
up to 1 rows
where lgort in s_lgort.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Storage Location'(004).
endif.
endif.
Validation of Characteristic Value
clear cabn.
if not s_atinn[] is initial.
select atinn
into cabn-atinn
from cabn
up to 1 rows
where atinn in s_atinn.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Characteristic Value'(005).
endif.
endif.
Validation of Plant, Material and Storage Location
clear mard.
select matnr werks lgort
into (mard-matnr, mard-werks, mard-lgort)
from mard
up to 1 rows
where matnr in s_matnr and
werks in s_werks and
lgort in s_lgort.
endselect.
if sy-subrc <> 0.
message e899 with 'No Data found for the Selection Criteria'(006).
endif.
endform. "validate_screen
*& Form get_headings
Write the Report and Column Headings
form get_headings.
data: l_repid type sy-repid.
l_repid = sy-repid.
call function 'Y_STANDARD_HEADING'
exporting
repid = l_repid
heading1 = sy-title.
write:/1(125) sy-uline.
format color col_heading on.
write : /1 sy-vline, 2(18) 'Material Number'(008) centered,
20 sy-vline, 21(40) 'Material Description'(011) centered,
61 sy-vline, 62(22) 'Ratio'(009) centered,
84 sy-vline, 85(18) 'Quantity'(010) centered,
103 sy-vline, 104(20) 'Base Unit of Measure'(015) centered,
125 sy-vline.
write:/1(125) sy-uline.
format color off.
endform. "get_headings
*& Form get_mat_stock_data
Get the Material and Batch Stock data from MARA and MCHB Tables
form get_mat_stock_data.
clear: i_mchb,i_output, i_output1.
refresh: i_mchb,i_output, i_output1.
select a~matnr " Material Number
b~werks " Plant
b~lgort " Storage Location
b~charg " Batch Number
b~clabs " Stock Value
a~meins " Base Unit of Measure
into table i_mchb
from mara as a inner join mchb as b
on amatnr eq bmatnr
where b~matnr in s_matnr and
b~werks in s_werks and
b~lgort in s_lgort.
if sy-subrc <> 0.
g_exit = c_flag.
message s899 with 'No Data found for the Selection Criteria'(006).
stop.
endif.
sort i_mchb by matnr werks lgort charg.
endform. " get_mat_stock_data
*& Form get_plant_grp_data
Get the Material Group Text and Plant Name from T023T and T001W
form get_plant_grp_data.
if not i_mchb[] is initial.
Get the Plant Description from t001w Table
clear i_plant.
refresh i_plant.
select werks " Plant
name1 " Name
into table i_plant
from t001w
for all entries in i_mchb
where werks = i_mchb-werks.
Get the Material Description from MAKT Table
clear i_makt.
refresh i_makt.
select matnr " Material number
maktx " Material Description
into table i_makt
from makt
for all entries in i_mchb
where matnr = i_mchb-matnr and
spras = sy-langu.
sort i_plant by werks.
delete adjacent duplicates from i_plant comparing werks.
sort i_makt by matnr.
delete adjacent duplicates from i_makt comparing matnr.
endif.
endform. "form get_plant_grp_data.
*& Form append_final_data
Append the data into final Internal Table
form append_final_data.
data : l_matbatch(28),
l_tabix like sy-tabix.
if not i_mchb[] is initial.
loop at i_mchb.
l_tabix = sy-tabix.
clear l_matbatch.
concatenate i_mchb-matnr i_mchb-charg into l_matbatch.
move-corresponding i_mchb to i_output.
Get the Plant Description from i_plant Table
read table i_plant with key werks = i_mchb-werks binary search.
if sy-subrc = 0.
i_output-name1 = i_plant-name1.
endif.
Get the Material Description from i_makt Table
read table i_makt with key matnr = i_mchb-matnr binary search.
if sy-subrc = 0.
i_output-maktx = i_makt-maktx.
endif.
Get the Characteristic Values data from INOB and AUSP Tables
clear inob.
select single cuobj from inob
into inob-cuobj
where klart = c_klart and
obtab = c_obtab and
objek = l_matbatch.
if sy-subrc = 0.
select objek
atinn
atflv
from ausp
into table i_ausp
where objek = inob-cuobj and
atinn in s_atinn and
klart = c_klart.
sort i_ausp by objek atinn.
loop at i_ausp.
clear cabn.
select single atinn atnam from cabn
into (cabn-atinn,cabn-atnam)
where atinn = i_ausp-atinn.
if sy-subrc = 0.
If the ratio value is between 13-14.99, display 13
if cabn-atnam cs c_ratio.
if i_ausp-atflv between c_13 and c_1499.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_13.
If the ratio value is between 15-16.99, display 15
elseif i_ausp-atflv between c_15 and c_1699.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_15.
If the ratio value is between 17-18.99, display 17
elseif i_ausp-atflv between c_17 and c_1899.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_17.
If the ratio value is between 19-20.99, display 19
elseif i_ausp-atflv between c_19 and c_2099.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_19.
If the ratio value is between 21-22.99, display 21
elseif i_ausp-atflv between c_21 and c_2299.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
elseif i_ausp-atflv >= c_23.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_23.
endif. " Condition for RATIO values
else. " If characteristic does contain RATIO
i_mchb-atflv = i_ausp-atflv.
endif.
i_output-atinn = cabn-atinn.
i_output-atnam = cabn-atnam.
i_output-atflv = i_ausp-atflv.
i_mchb1-matnr = i_mchb-matnr.
i_mchb1-werks = i_mchb-werks.
i_mchb1-lgort = i_mchb-lgort.
i_mchb1-charg = i_mchb-charg.
i_mchb1-clabs = i_mchb-clabs.
i_mchb1-atinn = i_ausp-atinn.
i_mchb1-atflo = i_mchb-atflv.
i_mchb1-atflv = i_ausp-atflv.
append : i_output, i_mchb1.
clear i_mchb1.
modify i_mchb index l_tabix transporting atflo atflv .
endif.
endloop.
endif.
endloop.
endif.
Checking whether the table is filled or not
if not i_output[] is initial.
sort i_output by atinn werks matnr atflv.
else.
g_exit = c_flag.
message s899 with 'No Data found for the Selection Criteria'(006).
endif.
Delete the records where RATIO is less than 13.
delete i_output where atnam cs c_ratio and atflv lt c_13.
endform. "append_final_data
*& Form display_report
Display the Report Output data
form display_report.
data: l_tabix like sy-tabix.
loop at i_output1.
l_tabix = sy-tabix.
At new Characteristic
at new atinn.
read table i_output1 index l_tabix.
format color 1 intensified on.
write: /1 sy-vline, 2(20) 'Characteristic Name:'(007),
23(40) i_output1-atnam,
125 sy-vline.
format color off.
format color 4 intensified on.
write: /1 sy-vline, 2(20) 'Plant Name :'(022),
23(4) i_output1-werks, 29(30) i_output1-name1,
125 sy-vline.
format color off.
write /1(125) sy-uline.
endat.
clear: g_clabs, g_clabs1.
format color col_normal.
write :/1 sy-vline, 2(18) i_output1-matnr,
20 sy-vline, 21(40) i_output1-maktx,
61 sy-vline.
if i_output1-atflv = c_c23.
write: 62(22) c_g23 centered.
else.
shift i_output1-atflv left deleting leading space.
write: 62(22) i_output1-atflv centered.
endif.
write: 84 sy-vline,
103 sy-vline,
110(5) i_output1-meins.
If the quantity value is negative
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
hide : i_output1.
new-line.
At end of material
at end of matnr.
sum.
move : i_output1-matnr to g_matnr.
format color 3 intensified on.
write /1(125) sy-uline.
write :/1 sy-vline, 2(25) 'Total for Material :'(012),
28(18) g_matnr.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
write: 125 sy-vline.
format color off.
write /1(125) sy-uline.
endat.
At end of plant
at end of werks.
sum.
move : i_output1-werks to g_werks.
format color 3 intensified off.
write :/1 sy-vline, 2(25) 'Total for Plant :'(013),
28(4) g_werks.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
write /1(125) sy-uline.
endat.
At end of characteristic
at end of atinn.
read table i_output1 index l_tabix.
sum.
format color 3 intensified on.
write :/1 sy-vline, 2(25) 'Total for Characteristic:'(014),
28(25) i_output1-atnam.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
write /1(125) sy-uline.
endat.
endloop.
endform. " display_report
*& Form DISPLAY_BATCH
Display the batch details for the seclected material *
form display_batch.
Get the batch details for the selected material
get cursor field g_cursor.
if g_cursor = c_cursor1 or
g_cursor = c_cursor2 or
g_cursor = c_cursor3 or
g_cursor = c_cursor4 or
g_cursor = c_cursor5 or
g_cursor = c_cursor6.
format color 3.
write: /1 sy-vline,
2(17) 'Material Number :'(020),
20(17) i_output1-matnr,
94 sy-vline.
format color off.
write /1(94) sy-uline.
loop at i_mchb1 where matnr = i_output1-matnr and
atinn = i_output1-atinn and
atflo = i_output1-atflv.
format color col_normal.
shift i_mchb1-charg left deleting leading '0'.
write :/1 sy-vline, 2(16) i_mchb1-lgort centered,
18 sy-vline, 19(17) i_mchb1-charg centered,
36 sy-vline.
if i_output1-atnam cs c_ratio.
write: 37(29) i_mchb1-atflv
exponent 0 decimals 2 centered.
else.
write : 37(29) i_mchb1-atflv
exponent 0 decimals 0 centered.
endif.
write : 66 sy-vline, 67(27) i_mchb1-clabs unit i_mchb-meins,
94 sy-vline.
format color off.
endloop.
write /1(94) sy-uline.
else.
message s899 with 'Invalid cursor position'(016).
exit.
endif.
endform. " DISPLAY_BATCH
*& Form HEADING_SECLIST
Write the Column Headings for Interactive Report
form heading_seclist.
write /1(94) sy-uline.
format color col_heading on.
write :/1 sy-vline, 2(16) 'Storage Location'(021),
18 sy-vline, 19(17) 'Batch Number'(017) centered,
36 sy-vline, 37(29) 'Characteristic Value'(018) centered,
66 sy-vline, 67(27) 'Quantity'(019) centered,
94 sy-vline.
write /1(94) sy-uline.
format color off.
endform. " HEADING_SECLIST
*& Form COLLECT_RATIO
Display the Characteristic ratio data
form collect_ratio.
loop at i_output.
clear g_atinn.
i_output1-atinn = i_output-atinn.
i_output1-atnam = i_output-atnam .
i_output1-werks = i_output-werks.
i_output1-name1 = i_output-name1.
i_output1-matnr = i_output-matnr.
i_output1-maktx = i_output-maktx.
i_output1-clabs = i_output-clabs.
i_output1-meins = i_output-meins.
call function 'CONVERSION_EXIT_ATINN_OUTPUT'
exporting
input = i_output-atinn
importing
output = g_atinn.
if g_atinn cs c_ratio.
If the ratio value is between 13-14.99, display 13
if i_output-atflv between c_13 and c_1499.
i_output1-atflv = c_13.
If the ratio value is between 15-16.99, display 15
elseif i_output-atflv between c_15 and c_1699.
i_output1-atflv = c_15.
If the ratio value is between 17-18.99, display 17
elseif i_output-atflv between c_17 and c_1899.
i_output1-atflv = c_17.
If the ratio value is between 19-20.99, display 19
elseif i_output-atflv between c_19 and c_2099.
i_output1-atflv = c_19.
If the ratio value is between 21-22.99, display 21
elseif i_output-atflv between c_21 and c_2299.
i_output1-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
elseif i_output-atflv >= c_23.
i_output1-atflv = c_23.
endif.
write i_output1-atflv to i_output1-atflv .
else.
write i_output-atflv to i_output1-atflv exponent 0 decimals 0.
endif.
collect i_output1.
clear i_output1.
endloop.
sort i_output1 by atinn werks matnr atflv.
endform. " COLLECT_RATIO
Reward if useful..
Regards,
Anji -
How to get the link between MCH1, AUSP, CAWN and CAWNT tables
Hi,
Can anyone let me know how to get the link between MCH1, AUSP, CAWN and CAWNT tables as I want to get the description (CAWNT-ATWTB) for a particular Batch (MCH1-CHARG).
Thanks & Regards,
KumarHi,
Can anyone let me know how to get the link between MCH1, AUSP, CAWN and CAWNT tables as I want to get the description (CAWNT-ATWTB) for a particular Batch (MCH1-CHARG).
Thanks & Regards,
Kumar -
Line connection between PCI-6527 card and instrument
Sorry for my foolish. My poor electronic knowledge prevent me from fully understanding what you explained in your last reply and need more help.
In fact, we plan to control two instrument switchs, one is for the Magnetic_Suspension_Control(MSC) , another is for control the Weight-changing-Device(WCD).
The instrument manufacturer provide a cable for the MSC and WCD. The cable looks as follows: there is one connection to the computer(25-pin subD-plug) of which two cables lead away, one to the MSC(6-pin Lemosa)and the other to the WCD(15-pin subD-plug).
The interface of the MSC is internally realized by using only two simple optocouples(OC). Their input-pins are connected directly to the 25-pin SubD-plug of
cable as follwing:
25-pol.SubD; meaning
Pin 9 anode of OC1-LED
Pin 7 anode of OC2-LED
Pin 23 cathode of OC-LED
Pin 18 cathode of OC-LED
Because of the optocouplers draw some current from the NI-card, the manufacturer let me make sure that the NI-card can source circa 7mA(better 10mA) on each pin.
The interface of the WCD consists of three simple TTL-level inputs, which are also directly connected to the 25-pin SubD-plug of our cable as following:
25-pol.SubD; meaning
Pin 4 TTL-Input (remote) (0-1V/3.5-5V)
Pin 3 TTL-Input (weight 1) (0-1V/3.5-5V)
Pin 2 TTL-Input (weight 2)(0-1V/3.5-5V)
Pin 5 common ground
The current drawn by the TTL-inputs is not worth mentioning.
By controling the logic state of these above pin states through labview, I then can control the instrument switch.
Based on above information, how should I choose right resistor for achieving the suitable v
oltage and current on each pin and How should I connect line between PCI-6527 card and 25-pin sub-D plug(I plan to use port 3 of PCI-6527 card).
Thanks, your help is greatly appreciately
zhouZhou,
My best recommendation is that you find someone who can give you a better and more direct advise in electronic circuiting. We don't have in our hands the manual of your instrument in order to clarify what it needs and where, although you gave some pin numbers we cannot take the risk of advising something that we don't have the absolute knowledge of. We can give you all the details you want about our card and what does it gives, but you have to decide how are you going to connect it to your instrument. If you recall your email about the manual, in fig. 3-6 page 3-12 you can see a picture of how to connect a TTL driven device, in the last email we gave you an option of how to connect the resistor and where, please read it again, basically I am going to repeat the same, we feel sorry about not been able to give you more help, but is opt to you to find help in electronic theory. Remember in my last email that I told you the 3 cases in which your instrument may need either voltage, current or both, and I told you how RL will change and what new resistors you may need to connect. Review that and make tests with your switch, your question about how to choose the right resistor is answered in the previous email and how to connect lines between the board and the cable of your instrument you have both pin outs... match them... the person who has in his hands the manual and the instrument is the best person to choose how to interfase both appliances... we are sorry Zhou but if we advise you about pin connections of your device with our blindness we have of your device we may make a mistake, we told you about our pins and how to choose resistors.
If you need more direct assistance on this Zhou you may better try to call us, by text messaging is limited and this requires direct guidance. If you decide to call us you can find instructions at www.ni.com/ask hope you move forward in your application as soon as possible.
Nestor Sanchez
Applications Engineer
National Instruments
Nestor
National Instruments -
Create or remove link between a webi doc and a category with SDK
Hi,
I'd like to use SDK to assign a category to a webi document, or to "uncategorized" document (remove the link between the document and a Corporate Category).
I first tried to select the document in the infostore (via infoobjects, "select * from CI_INFOOBJECTS where SI_ID = xxx") and use the "delete" option on the "SI_CORPORATE_CATEGORIES", but obviously, this is not the right method.
If someone has a little idea of how I can manage this link between a webi doc and a corp. category, I would be very grateful.
Thanks !
DavidHi,
This is much easier than it looks like, although it's not intuitive.
For example, when some webi is in a category, categories where the webi is linked are underlined in blue:
If you click in those blue marked categories and click Accept, you're unlinking the webi/report/dashboard from that category:
-->
Hope it helps
Alberto -
Link between subcontracting p.o and BOM
Hi
What is the link between subcontracting p.o and B.O.M
Thanksthe bill of material is stored in tables MAST and STKO and STPO
if you create a subcontract PO, then SAP is using the material number and searching for the bill of material is read and the needed components are copied into RESB table.
So in general the material number is the main link to the BOM.
If you have several BOMs and use alternative BOMs for subcontracting, then you find the BOM via production versions. this field is maintained in the info record.
But the BOM becomes always PO specific, as it is copied to the PO. A change in CS02 will not effect the open PO.
You can even create a subcontract PO without having a BoM in your system, you then enter the components manually in ME21N detail material tab. then these components are stored in RESB only. -
Link between MM accounting Document and FI accounting Doc
Hi,
How to get a link between MM accounting document and FI accounting document.
Is there any standard report available.
Regardsthe link is here:
SPRO --> MM --> Valuation and account determination --> Account determination --> A/c determination w/o wizard -> inside this check every trasaction...
Hope it helps...
Regards
Priyanka.P
Maybe you are looking for
-
Macbook dual VGA display output
Hi, I was wondering if there is a way to use 2 VGA displays in extended desktop mode with my Macbook. I currently use my MacBook (with lid open) with a 21" external display, but just found an old 18" monitor which I would also like to use. I am willi
-
How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server.
How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server With Oracle 11g R2. How many database will play in this role. Best,
-
Uninstalling the trial version of Lightroom 4.2
I cannot uninstall the program via Windows Vista's "Uninstall or Change a Program." When I try, I get this message, "The system administrator has set policies to prevent this installation," then this message, "You do not have sufficient access to uni
-
External keypad will not connect to MacBook
I have an external Samsonite Comptuer Keypad and it will not connect to my macbook. It is saying to press the key next tothe shift key, but there is not shift key, because it's only a keypad. If anybody knows what to do..please help! Also, there is n
-
IPaletteMgrService in CS2 and CS3...
I try to use IPaletteMgrService in both CS2 and CS3 on the Mac (10.4.x, PPC only or Universal) and I am going no where... as always, I can get it to compile but the call back is not happening.<br /><br />In the class descriptoion table, I have:<br />