Permission denied error while CBS is building DCs

Hi,
from time to time we get an permission denied error when activating changes. The CBS server tries to check out files into the temporary build folders at the server and cannot do that for one file (see following error message).
As already said this happens only sometimes and only for single files.
Does anyone have the same experience and/or a suggestion how to solve this problem?
When deleting the folder and activating again the error has gone.
Build number assigned: 5843
Change request state from QUEUED to PROCESSING
ACTIVATION request in Build Space "CMS_EBYASZ_D" at Node ID: 9.611.151
 [id: 2.568; parentID: 0; type: 4]
 [options: NO OPTIONS]
REQUEST PROCESSING started at 2005-09-30 12:53:00.074 GMT
===== Pre-Processing =====
List of activities to be activated:
 1 activity in compartment "eon.com_EON_EBY_ASZ_R_1"
 Recherche Splitting Nachtrag 7 (30.09.05, 14:51)
 [seq. no 23][created by H15430J at 2005-09-30 12:52:46.0][ID 4e1a116731af11daa5b00003ba1edce1]
Analyse activities... started at 2005-09-30 12:53:00.172 GMT
 Synchronizing component "eon.com/eby/asz/recherch/util" from repository... finished at 2005-09-30 12:53:01.414 GMT and took 824 ms
 Component "eon.com/eby/asz/recherch/util" is to be CHANGED by this activation.
 1 component to be build in compartment "eon.com_EON_EBY_ASZ_R_1"
Analyse activities... finished at 2005-09-30 12:53:01.574 GMT and took 1 s 402 ms
Calculate all combinations of components and variants to be built...
 "eon.com/eby/asz/recherch/util" variant "default"
Prepare build environment in the file system... started at 2005-09-30 12:53:02.173 GMT
 Synchronize development configuration... finished at 2005-09-30 12:53:02.176 GMT and took 2 ms
 Synchronize component definitions... finished at 2005-09-30 12:53:02.274 GMT and took 97 ms
 Synchronize sources...
12:53:06.831 SYNC (FAILED: Failed to create/open file:
/usr/sap/D16/JC00/j2ee/cluster/server1/temp/CBS/39/.CACHE/228/DCs/eon.com/eby/asz/recherch/util/_comp/src/packages/de/isenergy/eby/zaehlerwesen/recherche/util/UtilComp.wdcontroller
(Permission denied)) UtilComp.wdcontroller (/usr/sap/D16/JC00/j2ee/cluster/server1/temp/CBS/39/.CACHE/228/DCs/eon.com/eby/asz/recherch/util/_comp/src/packages/de/isenergy/eby/zaehlerwesen/recherche/util/UtilComp.wdcontroller)
Prepare build environment in the file system... finished at 2005-09-30 12:53:08.555 GMT and took 6 s 382 ms
===== Pre-Processing ===== finished at 2005-09-30 12:53:08.560 GMT and took 8 s 411 ms
Change request state from PROCESSING to FAILED
ERROR! The following problem(s) occurred during request processing:
ERROR! The following error occurred during request processing:Failed to synchronize
/usr/sap/D16/JC00/j2ee/cluster/server1/temp/CBS/39/.CACHE/228/DCs/eon.com/eby/asz/recherch/util/_comp/src/packages
REQUEST PROCESSING finished at 2005-09-30 12:53:08.563 GMT and took 8 s 489 ms
Thanks for any hint
Helmut

Hi Sidharth,
good to hear that we are not the only company with this problem.
We also do have this problem since months, from SP9 to SP11.
First we thought that it would have been a CBS configuration or an OS problem but this cannot be the reason because as you already mentioned it works after serveral attempts. We also analysed the temporary CBS folders and noticed that only one file (the one that causes the error) does have other attributes than the others.
That sounds very strange and I hope that someone from SAP will read this task.
At the moment we are collecting all the problems and errors that appear with the JDI and the Netweaver Developeer Studio to present SAP this list in bulk. We cannot write an OSS note for every error we discover as suggested by SAP.
Stability mainly of the NWDS plugins is the biggest problem we have at the moment. Did you make the same experience?
Regards
Helmut

Similar Messages

Permission denied error while checking in

I am working on webdynpro DC. While i try to checkin the DC, the following permission denied errror pops up. I have seen a blog with similar problem, but no answer. Will someone from SAP help solve this issue?
The related link with similar problem is
Permission denied error while CBS is building DCs
My Log is as follows:
Build number assigned: 7900
Change request state from QUEUED to PROCESSING
ACTIVATION request in Build Space "D30_ESSJAVA_D" at Node ID: 7,433,150
 [id: 7,756; parentID: 0; type: 4]
 [options: IGNORE COMPONENT INTERSECTION]
REQUEST PROCESSING started at 2007-05-22 15:55:22.138 GMT
===== Pre-Processing =====
Waiting 5 ms
List of activities to be activated:
 1 activity in compartment "com.swiss_XSSswiss_1"
 Model_KA_22022007_1735
 [seq. no 1129][created by INDIA at 2007-05-22 17:55:14.0][ID 4db56227087911dcb96f0013217ca473]
Analyse activities... started at 2007-05-22 15:55:22.155 GMT
Analyse dependencies to predecessor activities... finished at 2007-05-22 15:55:23.704 GMT and took 1 s 400 ms
 SKIP : Development Component "com.swiss/xss/glbmr"
 1 component to be build in compartment "com.swiss_XSSswiss_1"
Analyse activities... finished at 2007-05-22 15:55:23.777 GMT and took 1 s 622 ms
Change request state from PROCESSING to PROCESSING
Calculate all combinations of components and variants to be built...
 "com.swiss/xss/glbmr" variant "default"
Prepare build environment in the file system... started at 2007-05-22 15:55:23.876 GMT
 Synchronize development configuration... finished at 2007-05-22 15:55:23.877 GMT and took 0 ms
 Synchronize component definitions... finished at 2007-05-22 15:55:23.892 GMT and took 14 ms
 Synchronize sources...
17:55:36.481 SYNC (FAILED: Failed to create/open file: /usr/sap/trans_D30/CBS/65/.CACHE/437/DCs/com.swiss/xss/glbmr/_comp/src/packages/com/swiss/glbmr/trainmodel/types/Bapiqualif.dtstructure (Permission denied (errno:13))) Bapiqualif.dtstructure (/usr/sap/trans_D30/CBS/65/.CACHE/437/DCs/com.swiss/xss/glbmr/_comp/src/packages/com/swiss/glbmr/trainmodel/types/Bapiqualif.dtstructure)
17:55:36.702 SYNC (FAILED: Failed to create/open file: /usr/sap/trans_D30/CBS/65/.CACHE/437/DCs/com.swiss/xss/glbmr/_comp/src/packages/com/swiss/glbmr/trainmodel/types/Plstx.dtsimpletype.xlf (Permission denied (errno:13))) Plstx.dtsimpletype.xlf (/usr/sap/trans_D30/CBS/65/.CACHE/437/DCs/com.swiss/xss/glbmr/_comp/src/packages/com/swiss/glbmr/trainmodel/types/Plstx.dtsimpletype.xlf)
17:55:36.714 SYNC (FAILED: Failed to create/open file: /usr/sap/trans_D30/CBS/65/.CACHE/437/DCs/com.swiss/xss/glbmr/_comp/src/packages/com/swiss/glbmr/trainmodel/types/Syuname.dtsimpletype (Permission denied (errno:13))) Syuname.dtsimpletype (/usr/sap/trans_D30/CBS/65/.CACHE/437/DCs/com.swiss/xss/glbmr/_comp/src/packages/com/swiss/glbmr/trainmodel/types/Syuname.dtsimpletype)

Hi Sandeep,
looks like your CBS has no permission in the filesystem where it tries to build your DC.
The prefix "/usr/sap/trans_D30/CBS" looks a bit suspicious to me. Is it really intentional that CBS should work in some (probably publicly visible) transport directory?
Regards,
Marc

ADT packaging with native extensions : permission denied error when running remote build.

Hi Team,
We are facing the following error when running the nightly ant build script on Mac machine for our air mobile application. We are using iOS native extensions and package with ADT. This works fine when we run the build as local user in the Mac machine. Earlier we faced some issues due to headless build and we have added the <headless-server>true</headless-server> in corresponding config files (flex-config.xml, airmobile-config.xml). After that we are facing the following error, even when we run the ant build in headless mode using the following command.
ant -Djava.awt.headless=true -f build.xml buildPackage
When running this build as local user in the Mac build machine, we see a window opening with com.adobe.air.ADT while packaging. This is the issue when running nightly build as there is no graphics window.
Can anybody please help how to get rid of this issue for nightly build using adt,jar?
Here is the error from build log:
buildiOSPackageWithNativeExtensionMac:
 [echo] Export the iOS package with Native extension for ApprovalsMobile in Mac
 [java] Exception in thread "main" java.lang.InternalError: Can't connect to window server - not enough permissions.
 [java] at java.lang.ClassLoader$NativeLibrary.load(Native Method)
 [java] at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1827)
 [java] at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1724)
 [java] at java.lang.Runtime.loadLibrary0(Runtime.java:823)
 [java] at java.lang.System.loadLibrary(System.java:1045)
 [java] at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
 [java] at java.security.AccessController.doPrivileged(Native Method)
 [java] at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
 [java] at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
 [java] at java.awt.Dimension.<clinit>(Dimension.java:70)
 [java] at com.adobe.air.validator.ApplicationDescriptorValidator.validateImageUri(ApplicationDescri ptorValidator.java:183)
 [java] at com.adobe.air.validator.ApplicationDescriptorValidator20.validateElement(ApplicationDescr iptorValidator20.java:121)
 [java] at com.adobe.air.validator.ApplicationDescriptorValidator25.validateElement(ApplicationDescr iptorValidator25.java:65)
 [java] at com.adobe.air.validator.ApplicationDescriptorValidator26.validateElement(ApplicationDescr iptorValidator26.java:62)
 [java] at com.adobe.air.validator.ApplicationDescriptorValidator30.validateElement(ApplicationDescr iptorValidator30.java:52)
 [java] at com.adobe.air.validator.ApplicationDescriptorValidator31.validateElement(ApplicationDescr iptorValidator31.java:46)
 [java] at com.adobe.air.validator.DescriptorValidator.endElement(DescriptorValidator.java:239)
 [java] at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.endElement(AbstractSAXParser .java:601)
 [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(XML DocumentFragmentScannerImpl.java:1782)
 [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(XMLDocumentFragmentScannerImpl.java:2939)
 [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImp l.java:648)
 [java] at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScanne rImpl.java:140)
 [java] at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDo cumentFragmentScannerImpl.java:511)
 [java] at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.ja va:808)
 [java] at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.ja va:737)
 [java] at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:119)
 [java] at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java :1205)
 [java] at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.j ava:522)
 [java] at javax.xml.parsers.SAXParser.parse(SAXParser.java:395)
 [java] at javax.xml.parsers.SAXParser.parse(SAXParser.java:198)
 [java] at com.adobe.air.Descriptor.validateXML(Descriptor.java:182)
 [java] at com.adobe.air.Descriptor.<init>(Descriptor.java:56)
 [java] at com.adobe.air.ApplicationDescriptor.<init>(ApplicationDescriptor.java:84)
 [java] at com.adobe.air.ApplicationPackager.validateApplicationDescriptor(ApplicationPackager.java: 101)
 [java] at com.adobe.air.ApplicationPackager.createPackage(ApplicationPackager.java:64)
 [java] at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:217)
 [java] at com.adobe.air.ADT.parseArgsAndGo(ADT.java:557)
 [java] at com.adobe.air.ADT.run(ADT.java:414)
 [java] at com.adobe.air.ADT.main(ADT.java:464)
Thanks,
Swathi.

Note: Before the above error that were two other errors .
1) The build complained that the adt-bundle-linux toolchain could not be found and required that it be added to .mozconfig. This was done.
2) The build complained that dx could not be found.
The configure file was edited and the values $DX, $AAPT and $AIDL were all set to the adt-bundle-linux/sdk/build-tools/android-4.4 path.
The instructions given on the Mozilla Wiki did not work right for Android and several modifications were made to move it along. But this permission error is tough to figure out.

Permission Denied error launching content in SumTotal 7.2

I’m testing the trial version of Presenter 7 with SumTotal 7.2. I’m running into an inconsistent Permission Denied error that sometimes occurs when the lesson is launched and the lesson will not load/display. It doesn’t happen every time, even on the same computer. I may get the error message when trying to launch the Presenter lesson and then it may launch as expected on the second attempt. This has happened on three different computers and with each one it seems to happen sporadically. I believe, when it does happen, it will occur the first time a new lesson is launched, but then it may or may not happen again.
The error message appears in a pop-up labeled Internet Explorer with the following details:
Problems with this Web page might prevent it from being displayed properly or functioning properly. In the future, you can display this message by double-clicking the warning icon displayed in the status bar.
Line: 15
Char: 3
Error: Permission denied
Code: 0
The error points to the SCORM.HTM file. Here's the code its referring to:
<script type="text/vbscript" language="VBScript">
 Sub SlideContent_FSCommand(ByVal command, ByVal args)
 select case command
 case "putHREF" location.href = args
 case "putTitle" document.title = args
 case else call SlideContent_DoFSCommand(command, args)
 end select
 end sub
</script>
I tried to comment out the vbscript, but the error occured with the next script on the page.
Currently I'm using Breeze 5.1 on SumTotal 7.2 and eveything works as expected. I checked a copy of a SCORM.HTM file created with Breeze 5 and it appears to have the same script in that spot and it's never caused a problem.
Workstation configuration:
WinXP SP2
IE6
Presenter 7 (trial version)
Flash Player 9
Thank you in advance for your help!

Hi Sandeep,
looks like your CBS has no permission in the filesystem where it tries to build your DC.
The prefix "/usr/sap/trans_D30/CBS" looks a bit suspicious to me. Is it really intentional that CBS should work in some (probably publicly visible) transport directory?
Regards,
Marc

Access Denied Error while accessing "Site Settings Access requests and invitations"

Hi,
I am getting Access Denied Error while accessing "Site Settings > Access requests and invitations" in SharePoint 2013 online. Currently I am the owner of the site and have "FULL CONTROL" access. I am able to access using
site collection account. So, what permission I have to give my regular account to access this page?
Thanks, Pal

Hello,
Have you recently changed the Owners group of the site collection or removed the user from the original owners group?
The reason I am asking is when the Access requests and invitations list are created, the permissions are given only to the default owners group at the time that the Access Request list was created. If this "regular account" is not part of that owners
group, the user will receive access denied. Site Collection Admins always have permissions for the Access Request List.
A workaround for the Access Denied issue is listed in the KB article http://support.microsoft.com/kb/2911390/en-us. By giving the correct group or user the permissions to this list, the users will not receive
the Access Denied issue anymore.
Preferably, in order to grant the user the full permissions ( you will see features like resending invitations may still fail after implementing the above workaround) there is one other workaround that may be required depending on what the original issue
was. Below are additional steps to restore full functionality.
1)Access the /_layouts/15/permsetup.aspx of the site collection, make sure the default Owners Group
is set correctly. (There is a group selected)
2) Add user to that Owners Group. (Issue may be resolved at this step if the site collection Owners
Group was never changed, if not continue to next step.)
3) Implement workaround on http://support.microsoft.com/kb/2911390/en-us, by adding that owners
group as Full control on Access Request list Permissions.
Let me know how this works out for you.
- Shpendi Jashari

Permission Denied Error when RWD auto playback file is published in portal

Hi All,
We are trying to Publish RWD Auto play back file link in Portal Environment. While doing so, we getting error Permission Denied" error(Java script error which comes on the status bar)
Following are the steps been followed so far for enabling this RWD file
1. We have uploaded an entire folder consisting of RWD Document say a HTML file which is of size say 15 MBwhich makes use of many other image files,GIF files, HTML files which are all present inside the folder into KM content of SAP EP Portal
2. We have created a KM document iview out of the HTML file(flash file)
Regards,
Sowmya

Hi,
Its not related to Work flow.Its just related to KM upload in the portal but the problem is the file will play only when the entire folder is uploaded.But after creating the KM document iview out of the link to the file,its not opeining.Its giving a blank screen with the "permission denied" error in the status bar
Regards,
Sowmya

Script ran by Lingon gets "permission denied" error

I am trying to use Lingon to run a script every 60 minutes, and am getting a permission denied error:
2009/05/27 18:12:52 com.apple.launchd[73] (Time.Machine.monitor.launcher[1006]) posixspawnp("Library/Scripts/User_scripts/Time_Machinemonitor.app", ...): Permission denied
The script was saved as an application bundle.
Why would permission be denied? Where does one set permissions??
Thanks in advance for any help.

It seems a script saved as an "application bundle" will get the "permission denied" message, while a script save as "application" will run normally.
Note that startup screen should also be off.

Why sign in as xelsysadm get a permission denied error

Hi all,
i install oim11g (11.1.1.3.0) finished
but while i at "advance - System Managenment - Scheduler" and try to Sesrch Scheduler , a "Permission denied" ERROR occurred.
while the errror occurred,can find a Warning in logs :
<Jun 17, 2011 10:48:17 AM CST> <Warning> <oracle.iam.consoles.faces.mvc.common> <BEA-000000> <oracle.iam.platform.canonic.base.NoteException: Permission denied>
is the xelsysadm a Super Administrator ? why the error happened ?
Thank you.

Hi Sunny,
i query select # from USG where USR_KEY=1
(# is *)
got below datas
"UGP_KEY" "USR_KEY" "RUL_KEY" "USG_PRIORITY" "USG_RULE_BASED" "USG_DATA_LEVEL" "USG_CREATE" "USG_CREATEBY" "USG_UPDATE" "USG_UPDATEBY" "USG_NOTE" "USG_ROWVER"
1 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@fe3b60
5 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@ec3ae8
6 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@10f81ed
7 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@11b06be
8 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@157b5f3
9 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@16a870f
10 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@c90428
11 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@12fe9c7
13 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@9d3cbd
14 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@fedb2e
15 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@1e7dedc
16 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@1d85823
18 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@828086
19 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@1c41b39
20 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@1d75be3
21 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@1d1c74a
22 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@172f436
24 1 "" 1 "0" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@1ff310d
25 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@ed84e6
17 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@1b01eab
12 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@1ad8c30
26 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@cedfab
27 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@1be7f0c
Edited by: Lighting Cui on Jun 19, 2011 6:26 PM
Edited by: Lighting Cui on Jun 19, 2011 6:28 PM

JSP calling a shell script (permission denied error)

HI there,
I am trying to execute a shell script command from JSP, and I am pretty close to getting it done. The actual shell comnmand I am trying to run
"scp test.txt somebody@somedomain:~/directory1/test.txt"
is working fine when I run it from the shell command line (when I am logged in as that somebody)
However, when I try to execute this script with the following JSP code (by accessing the JSP file from the browser, I get a permission denied error). The JSP file is set to 777 permission, and I have been trying lots of stuff with not much luck for a few days now .....
any input is much appriciated
<%@page language="java"%>
<%@page import="java.io.BufferedReader"%>
<%@page import="java.io.File"%>
<%@page import="java.io.InputStreamReader"%>
<%@page import="java.io.StringReader"%>
<%@page import="java.io.File"%>
<%@page import="java.io.FileInputStream"%>
<%@page import="java.io.FileReader"%>
<%@page import="java.io.Writer"%>
<html>
<body>
<%
String osName = System.getProperty("os.name");
out.write(osName+" ");
String s = null;
String cmd1 = "scp test.txt somebody@somedomain:~/directory1/test.txt";
out.write("Execing \"" + cmd1 + "\" ");
File workDir = new File("/export/home/web/admintool/web/javatest");
try {
 Process p1 = Runtime.getRuntime().exec(cmd1, null, workDir);
 int exitValue = p1.waitFor();
 if (exitValue == 0){
 BufferedReader stdInput = new BufferedReader(new InputStreamReader(p1.getInputStream()));
 while ((s = stdInput.readLine()) != null) {
 out.write(s + " ");
 else {
 BufferedReader stdErr = new BufferedReader(new InputStreamReader(p1.getErrorStream()));
 while ((s = stdErr.readLine()) != null)
 out.write(s + " ");
 out.write("exit value is" + exitValue + " ");
catch (Exception e) {
 System.out.println(e);
} %>
</body></html>

Doesn't matter what perms the JSP has.
The servlet container and web server must allow it to runtime.exec, for one, which is insecure and dangerous. Talk to your admin if you want that and they may sandbox it for you.
The next thing is that the JSP will run as the web server -- so the file to exec must be set as 777 or 755 with the web server uid in the same group as the owner (share gid).

Timerjob Access denied error while opening web object

Hi Team,
I have created a timer job to get list information on the site. Everything is fine in the development(Stand alone server) . Got access denied error while running same timer job in QA server(one app and one WFE).
Note: This timer job is globally deployed.
Code snippet :
SPSite site1 = webApp.Sites[0];
SPWeb web = site1.RootWeb;
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite(site1.ID))
using (SPWeb currWeb = site.OpenWeb(web.ID)) // Got access denied error here.
Additional information:
Sharepoint timer service account : Domain\SP_Farm
Site app pool account : Domain\SP_App.
Both accounts have site collection administrative access on the site. Do i need to check access permissions on DB level also this error ?
Waiting for urgent reply..

Hi,
1. Please check the link below:
Fixing Access Denied Errors With SharePoint 2010 Timer Jobs
http://www.sharepointsecurity.com/sharepoint/sharepoint-security/fixing-access-denied-errors-with-sharepoint-2010-timer-jobs/
2. Try to set RemoteAdministratorAccessDenied to false using PowerShell
Access denied when deploying a timer Job or activating a feature from SharePoint 2010 content web application
https://support.microsoft.com/kb/2564009?wa=wsignin1.0
3. Check your ULS log for detail error message.
Best Regards
Dennis Guo
TechNet Community Support

Error while exporting release build.

I'm getting this error while exporting release build targeting iOS, running Flash Builder 4.7 and Apache Flex 4.10.0, any help would be greatly appreciated.
Error occurred while packaging the application:
# A fatal error has been detected by the Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x0000000180386950, pid=3328, tid=2472
# JRE version: 6.0_31-b05
# Java VM: Java HotSpot(TM) 64-Bit Server VM (20.6-b01 mixed mode windows-amd64 compressed oops)
# Problematic frame:
# C [llvm.dll+0x386950]
# An error report file with more information is saved as:
# C:\wamp\www\Flex\ROMCorp\bin-release-temp\AOT\hs_err_pid3328.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
Compilation failed while executing : ADT

My application contains too much private data, I can't attach it. Just several notes about my problem:
1. It's not reproducible in the Flash Builder 4.6 on OSX 10.6.8
2. It's reproducible with ant build script
3. Error is gone when I removed all <icon></icon> elements from descriptor file.

Getting access denied error while importing file using input type="file"

Hi All,
I am using struts application wherein I need to import file for some purpose.I have used input type="file" for the same which goes like:
<input type="file" id="uploadFile" name="uploadFile" size="50">
I have the import button on which I have used onClick event to call javascript function submitValues() used to validate all the fields from the page which goes like:
<input type="button" name="select" value="Import" class="CSSButton" onClick="javascript:submitValues();">
The JS function then in turn submits the form and calls the action.The problem is sometimes even when the correct path is specified for the file to be imported results in access denied error.This error comes sometimes and other times it works fine.But when this error comes,I need to relogin into the application and then it works fine.I am using IE7 for this.
Any idea why I am getting access denied error while importing? Has it got something to do with IE7 version or with the input type="file" which is being used here?
Thanks for any help if anyone can provide.
Edited by: passionateforjava on Mar 4, 2009 2:18 AM

vishnuS1984 wrote:
Hi Friends,
I have gone through scores of examples and i am failing to understand the right thing to be done to copy a file from one directory to another. Here is my class...So let's see... C:\GetMe1 is a directory on your machine, right? And this is what you are doing with that directory:
public static void copyFiles(File src, File dest) throws IOException
// dest is a 'File' object but represents the C:\GetMe1 directory, right?
fout = new FileOutputStream (dest);If it's a directory, where in your code are you appending the source file name to the path, before trying to open an output stream on it? You're not.
BTW, this is awful:
catch (IOException e)
IOException wrapper = new IOException("copyFiles: Unable to copy file: " +
src.getAbsolutePath() + "to" + dest.getAbsolutePath()+".");
wrapper.initCause(e);
wrapper.setStackTrace(e.getStackTrace());
throw wrapper;
}1) You're hiding the original IOException and replacing it with your own? For what good purpose?
2) Even if you had a good reason to do that, this would be simpler and better:
throw new IOException("your custom message goes here", e);
rather than explicitly invokign initCause and setStackTrace. Yuck!

DB13 jobs cancelled due to "Permission denied" error.

Hi all,
DB13 jobs are cancelled due to "Permission denied" error. I pasted the error log below. Actually we have upgraded database from Oracle 9 to 10, then after these jobs are cancelling before that this was fine. What could be the problem cousing to cancell these jobs in DB13. Please help me to resolve this issue.
Please let me know if you need any more information.
Current Database:- ORACLE, Release:- 10.2.0.2.0
SAP Component version:- SRM 4.0 , Release 640
Job log
Job started
Step 001 started (program RSDBAJOB, variant &0000000000080, user ID sridharm)
Execute logical command BRCONNECT On host aaebp0us
Parameters: -u / -c -f check
BR0801I BRCONNECT 7.00 (26)
BR0252W Function fopen() failed for '/oracle/PRD/102_64/dbs/initPRD.ora' at location BrInitOraCopy-2
BR0253W errno 13: Permission denied
BR0252E Function fopen() failed for '/oracle/PRD/sapcheck/cdyeuiqp.chk' at location main-11
BR0253E errno 13: Permission denied
BR0121E Processing of log file /oracle/PRD/sapcheck/cdyeuiqp.chk failed
BR0806I End of BRCONNECT processing: cdyeuiqp.chk2008-06-21 22.00.15
BR0280I BRCONNECT time stamp: 2008-06-21 22.00.16
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job finished
Thanks for your help....
Sridhar M

Hello,
Please check the SAP Note 113747 - Permissions for DBA tools BR*Tools and SAPDBA
The following settings are required for calling the BRTools and SAPDBA correctly, in particular when calling the BRTools from sapgui:
(1)
ora<sid> and <sid>adm on DB server have a search path on /sapmnt/<SID>/exe. (All br* and sapdba are contained in this directory.)
ora<sid> belongs to the dba group,
<sid>adm belongs to the sapsys group,
(2)
<sid>adm on the database server has the rhosts entry: "+ <sid>adm".
(3)
The ops$<sid>adm Oracle user must be created in the DB and must have the sapdba role (not DBA!) (refer to Note 134592 for more information about the role).
(4)
brarchive, brbackup, brconnect, brtools have permission 4775:
-rwsrwxr-x ora<sid> sapsys ...
These can be started by the ora<sid> or the <sid>adm OS user.
brrestore, brrecover, brspace, and sapdba have permission 755:
-rwxr-xr-x <sid>adm sapsys ...
These can only be started by the ora<sid> OS user.
<<
Problem is due to authorization, so correct it and it will work.
Peter

Permission denied (error 13) - trying to use goodsync to backup contents?

Hi all
I use Goodsync to sync files.
I'm trying to copy the contents of one 2TB partition (a) to an identical 2TB partition (b). (a) and (b) are both on seperate identical freecom mybook hard drives, They're both chained together with a firewire cable. (a) is attached to my macbook pro via the firewire port. (b) is connected through the chain.
This is the error I get when I try to sync: ( FYI Part 2 [MAC] is drive (a) ):
Cannot read folder /Volumes/Part 2 [MAC]/.Spotlight-V100/Store-V1/Stores/A2B518A5-EAA8-437B-AE14-720C356E3834: cannot open folder /.Spotlight-V100/Store-V1/Stores/A2B518A5-EAA8-437B-AE14-720C356E3834: Permission denied (error 13)
Cannot read folder /Volumes/Part 2 [MAC]/.Trashes: cannot open folder /.Trashes: Permission denied (error 13)
Very stumped so greatly appreciate some advice from someone who may know the resolution to this one
Many thanks to you!

Contact the developer of Goodsync at http://www.goodsync.com/mac/support/

Permission Denied Error when calling Matlab script from LabWindows/CVI

Hello,
I am reading in data from a DAQ and am writing it to a .csv file in LabWindows/CVI. I am then sending this data to Matlab to be filtered. I would like the filtered data to be accessed by LabWindows/CVI so that I can display it as a strip chart. I have gotten everything to work except the writing to a file in a Matlab script that is called from LabWindows/CVI. I am basically using the shipped example in found in the activex demo. (http://zone.ni.com/devzone/cda/epd/p/id/2994). I select the script that I want to run and each time it tries to open a file with write permissions I get a "Permission Denied" error. This occurs when using fopen() in Matlab. I have also tried using csvwrite() as well as dlmwrite(). Each one gives me a similar error. The script currently does not try to do any data processing. It just opens the file, if it is successful it then prints "hello" and then closes it. The script works well when it is run in Matlab, just not when it is called in LabWindows/CVI. Below is the script. Any thoughts, comments or suggestions are greatly appreciated. I am also open to using other approaches for sending data between Matlab and LabWindows/CVI. Thanks in advance!!
fclose('all');
[file, errmsg] = fopen('out.txt', 'w');
if(file<0)
 disp(errmsg)
else
 fprintf(file, 'hello');
 fclose('all');
end;
[file, errmsg] = fopen('out.txt', 'w');
if(file<0)
disp(errmsg)
else
fprintf(file, 'hello');
fclose('all');
end;

I am using Windows 7. I am running CVI as an administrator and was able to get rid of the "Permission Denied" error by going into the User Account Controls in windows and changing it to "Never Notify". However, this did not fix the problem of Matlab not being able to write to a file when the script is run from CVI. In the Matlab code below, It now gets in to the "else", suggesting that fopen() returns a good file handle. After getting in to the else statement, it will not actually write to the file, nor does it create it. However, I can make changes to the plot settings and those appear. Everything is functional when run from Matlab but when run from CVI, things get screwy with opening the file for writing. It handles the read well. It seems like there would have to be some file permission errors but, in the CVI program, I open and write to the file "in.csv". Any help is greatly appreciated.
clear;
fclose('all');
t = zeros(1000);
t = csvread('in.csv');
for i=1:1000
 t(i) = t(i)*4;
end;
[file, errmsg] = fopen('out.txt', 'w');
if(file<0)
 disp(errmsg)
else
 fprintf(file, 'goodbye');
 for i=1:1000
 %t(i) = t(i)*3;
 fprintf(file, '%f,', t(i));
 end;
 fclose(file);
 plot(t/3, t);
 ylabel('t');
 xlabel('Time (s)');
 title('Is this really working?!?');
end;
Thanks,
Chris

Permission denied error while CBS is building DCs

Similar Messages

Maybe you are looking for