Permission denied on the RedHat 6.2

Hi,
I have created the Oracle e Dba group. I have
installed OAS 4.x e WebDB 2.x for Linux.
I have always the error PERMISSION DENIED
when I run a command (for example: tnsping,
genclntsh, .....) and therefore I can not
complete the installation because I don't make to compile the packages.
Bye.

I have resolved the problem.
I mounted the file system ORACLE in noexec
mode and therefore I could not execute the
commands.
Bye

Similar Messages

Why is permission denied on trying to download the GB English version of Firefox 3.6.10?

I am trying to roll back to the previosu version of Firefox - v3.6.10 - the GB English version - too see if the problem of Firefox hanging when you search bookmarks goes away. I get permission denied from the FTP site.

Firefox 4 requires at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
For Mac OS X 10.4.11 or Mac OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
Download a new copy of the Firefox program
* Firefox 3.6: http://www.mozilla.com/en-US/firefox/all-older.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

What can I do to create a disk image when I continue to get the prompt "permission denied"? I have run the permission repair, restarted the computer and nothing changes.

I want to create a disk image for important information. I continue to get "Permission Denied" even though I have run the disk utility for repair and verify disk permissions. Is there a solution for this?

I had same problem as I was trying to build a windows iso following the bootcamp instructions (last evening). I learned you cannot create a disk image at root due to changes in the operating system made by apple. As a user (even an admin user) you can only create a disk image below root (such as in your desktop). Any attempt to creat an image at root will return permission denied.
The Apple Disk Utility (on three macs I have tried so far) defaults to creating an iso image at the root. If you tell it to create the image - you immediately get a permission denied error.
None of the iso creation instructions I have found on apple site so far speak to this.

Permission Denied error on RAC Install Sun SPARC Solaris-NetApps

Our RAC Installation is failing when installing in silent mode the base install of Oracle RDBMS 10.2.0.1. During the process file emtgtctl is copied from node1 to node2. On node1 the file has the following permissions:
-rwsr-s--x (note the user group and set-id "s" is on).
Oracle user is performing the intsall and he is a member of oinstall.
We get the error:
"Permission Denied" and the install fails.
We try and do the copy manually as well and this fails also.
Any one ever run accross something like this?

is oinstall the primary group for that user ?

Permission Denied when calling a method from VB using WebLogic 8.1.2 JCOM

Hi,
We are calling an java/ejb methods from VB using WebLogic JCOM 8.1 SP2. But
using JCOM, we are getting a error Permission denied when called from VB. We think
that we should update pathch jintegra 2.0 or 2.1 in WebLogic 8.1.2 the to solve
this issue, because we faced the same problen "permission denied" when we used
JINTEGRA(third party software). Once we installed the JINTEGRA 2.1 it solved the
issue.
So, can anyone help on regard to this issue of "Permission denied" in WebLogic
JCOM 8.1 SP2.
Thanks & Regards
Raghu

I too am experiencing the jCOM error: "Run-time error '70': Permission Denied". The problem appears to be related to a Microsoft Security Patch KB835732 (MS04-011 which, as you indicated, has been fixed in J-Integra v2.1 (FYI, jCOM 8.1 is based on J-Integra 1.5.4, see J-Integra/jCOM versions.
Did you ever get a resolution concerning 8.1 SP2? 8.1 SP3 is available now but I don't see any mention of jCOM updates in the WebLogic 8.1 What's New documention. I can't immediately upgrade (trying to stay on same version as a few other developers I work with) but I am hoping it is resolved in SP3.

Crontab: Permission denied

I wanted to install a cron entry to rsync my home dir to my backup server.
[ebal@myarch ~]€ crontab -e
bash: /usr/bin/crontab: Permission denied
In the begging i thought that it was something i did.
So i re-installed dcron and tried again.
The same result.
I checked the perms:
[ebal@myarch ~]€ ls -l /usr/bin/crontab
-rwsr-x--- 1 root users 9948 Jan 19 05:20 /usr/bin/crontab
I synced my abs directory and looked on PKGBUILD
# by default, any member of group "users" can edit their own crontab
make PREFIX=/usr CRONTAB_GROUP=users CRONTABS=/var/spool/cron CRONSTAMPS=/var/spool/cronstamps || return 1
The obvious solution is to add my self to users group, but why this is a necessity?
Why by default all the users can not edit their crontab ?

From the crontab manpage:
Only users who belong to the same group as the crontab binary will be able to install or edit crontabs. However it'll be possible for the superuser to install crontabs even for users who don't have the privileges to install them themselves. (Even for users who don't have a login shell.). Only the superuser may use the -u or -c switches to specify a different user and/or crontab directory.
A posible solution is to set another group for the binary (eg: crontab) and only add the user allowed to run cron jobs to that group instead of users (users is more general). The drawback with this approach is updates might change ownership back to root:users.

Firefox exits with CreateDirectoryAtPath: Permission denied error

I just downloaded and installed Firefox from
.../firefox/releases/latest-8.0/linux-x86_64/en-US/firefox-8.0.tar.bz2
When exiting, I get the following error messages
CreateDirectoryAtPath: Permission denied
RemoveFilesRecursively: stat: Permission denied
These specific messages are repeated about 6 times each.
The problem does not exist for all users.
I can reproduce the problem at will. The easiest way is to login as
the problematic user, start up firefox and then immediately close
with Ctrl+Q.
$ /opt/firefox-8.0/firefox/firefox
CreateDirectoryAtPath: Permission denied
RemoveFilesRecursively: stat: Permission denied
$
Note: the error messages don't appear until I "Quit."
Also there is a child zombie process. Both processes disappear on exit.
$ ps -fu user
user 2756 1744 3 14:50 pts/1 /opt/firefox-8.0/firefox/firefox
user 2757 2756 0 14:50 pts/1 [firefox] <defunct>
The popup
Help -> About Firefox
says
Firefox 8.0
And the result of
Check for update
is
Firefox is up to date
I'm running Debian Squeeze 2.6.32-5-amd64.
Thanks

Take a look at
this.
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

Scp works sftp permission denied - debug sftp-server process ?

We have a number of servers where we can scp a file on to the server, but when we try and sftp onto the server and put a file we get permission denied. The sftp connection works and we can cd arround just not put a file.
Its not a file/folder permissions problem.
Any ideas?
Is there any way under solaris 10 to put debug on the sftp-server process? you could under solaris 8 but according to the man pages under 10 the options have gone.

Try turning on logging.
I typically edit /etc/syslog.conf and add an entry
local7.info;local7.debug /var/log/sshd
ensuring the entries are tab delimited.
Then
touch /var/log/sshd
Edit /etc/ssh/sshd_config and change
SyslogFacility auth
LogLevel info
to
SyslogFacility LOCAL7
LogLevel debug
Restart everything:
svcadm restart system-log
svcadm restart ssh

[solved] nginx chroot jail: open() "/run/nginx.pid" Permission denied

I used the perl script from the nginx wiki to configure chroot jail and also configured the nginx systemd unit file. When I try to start the service I get
# systemctl start nginx
Job for nginx.service failed. See 'systemctl status nginx.service' and 'journalctl -xn' for details.
# systemctl status nginx.service
nginx.service - A high performance web server and a reverse proxy server in chroot jail
Loaded: loaded (/etc/systemd/system/nginx.service; enabled)
Active: failed (Result: exit-code) since tis 2013-05-07 20:58:49 CEST; 4s ago
Process: 418 ExecStartPre=/usr/bin/chroot --userspec=http:http /srv/http /usr/sbin/nginx -t -q -g pid /run/nginx.pid; daemon on; master_process on; (code=exited
, status=1/FAILURE)
Executing the ExecStartPre line produces the open error.
# /usr/bin/chroot --userspec=http:http /srv/http /usr/sbin/nginx -t -q -g 'pid /run/nginx.pid; daemon on; master_process on;'
nginx: [emerg] open() "/run/nginx.pid" failed (13: Permission denied)
What could be causing this?
Here's my nginx.service
# cat /etc/systemd/system/nginx.service
[Unit]
Description=A high performance web server and a reverse proxy server in chroot jail
After=syslog.target network.target
[Service]
Type=forking
PIDFile=/srv/http/run/nginx.pid
ExecStartPre=/usr/bin/chroot --userspec=http:http /srv/http /usr/sbin/nginx -t -q -g 'pid /run/nginx.pid; daemon on; master_process on;'
ExecStart=/usr/bin/chroot --userspec=http:http /srv/http /usr/sbin/nginx -g 'pid /run/nginx.pid; daemon on; master_process on;'
ExecReload=/usr/bin/chroot --userspec=http:http /srv/http /usr/sbin/nginx -g 'pid /run/nginx.pid; daemon on; master_process on;' -s reload
ExecStop=/usr/bin/chroot --userspec=http:http /srv/http /usr/sbin/nginx -g 'pid /run/nginx.pid;' -s quit
[Install]
WantedBy=multi-user.target
/srv/http/run
# ls -ahl /srv/http/run/
totalt 8,0K
drwxr-xr-x 2 root root 4,0K 7 maj 20.53 ./
dr-x--x--x 9 root root 4,0K 7 maj 20.16 ../
-rw-r--r-- 1 root root 0 7 maj 20.53 nginx.pid
edit:
# chroot --userspec http:http /srv/http /usr/sbin/nginx
nginx: [emerg] bind() to 0.0.0.0:80 failed (13: Permission denied)
I tried to change the port to 8080 and got
# chroot --userspec http:http /srv/http /usr/sbin/nginx
nginx: [emerg] open("/dev/null") failed (13: Permission denied)
solution:
The problem was due to the partition being mounted nodev,nosuid.
Last edited by seron (2013-05-08 11:25:12)

I know this post is quite old but I wanted to say thank you to the author that you posted this solution. THANKS!!!

Why sign in as xelsysadm get a permission denied error

Hi all,
i install oim11g (11.1.1.3.0) finished
but while i at "advance - System Managenment - Scheduler" and try to Sesrch Scheduler , a "Permission denied" ERROR occurred.
while the errror occurred,can find a Warning in logs :
<Jun 17, 2011 10:48:17 AM CST> <Warning> <oracle.iam.consoles.faces.mvc.common> <BEA-000000> <oracle.iam.platform.canonic.base.NoteException: Permission denied>
is the xelsysadm a Super Administrator ? why the error happened ?
Thank you.

Hi Sunny,
i query select # from USG where USR_KEY=1
(# is *)
got below datas
"UGP_KEY" "USR_KEY" "RUL_KEY" "USG_PRIORITY" "USG_RULE_BASED" "USG_DATA_LEVEL" "USG_CREATE" "USG_CREATEBY" "USG_UPDATE" "USG_UPDATEBY" "USG_NOTE" "USG_ROWVER"
1 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@fe3b60
5 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@ec3ae8
6 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@10f81ed
7 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@11b06be
8 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@157b5f3
9 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@16a870f
10 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@c90428
11 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@12fe9c7
13 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@9d3cbd
14 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@fedb2e
15 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@1e7dedc
16 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@1d85823
18 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@828086
19 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@1c41b39
20 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@1d75be3
21 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@1d1c74a
22 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@172f436
24 1 "" 1 "0" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@1ff310d
25 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@ed84e6
17 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@1b01eab
12 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@1ad8c30
26 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@cedfab
27 1 "" 1 "" 1 17-JUN-11 1 17-JUN-11 1 "" oracle.sql.RAW@1be7f0c
Edited by: Lighting Cui on Jun 19, 2011 6:26 PM
Edited by: Lighting Cui on Jun 19, 2011 6:28 PM

Server Debug Permission denied

I upgraded to CF8 and now when using the "Server Debug"
feture in Dreamweaver 8 I get an error. I can skip the error and
everything seems ok. It is just such a pain to get the error
message each time I start a debug session.
The error is:
The following error has occured while connecting to the
ColdFusion Server:
Permission denied for the requested operation.
Each time I make the error occure an entry is placed in the
ColdFusion Runtime log:
user RDSServlet: Permission denied for the requested
operation
I am running on MS IIS on a windows XP pro

Try turning on logging.
I typically edit /etc/syslog.conf and add an entry
local7.info;local7.debug /var/log/sshd
ensuring the entries are tab delimited.
Then
touch /var/log/sshd
Edit /etc/ssh/sshd_config and change
SyslogFacility auth
LogLevel info
to
SyslogFacility LOCAL7
LogLevel debug
Restart everything:
svcadm restart system-log
svcadm restart ssh

Bash: ./jdev: /bin/sh: bad interpreter: Permission denied

Unzipped the jdevj2eebase1013.zip
Set permissions as per install guide.
Try to run jdev get this error
bash: ./jdev: /bin/sh: bad interpreter: Permission denied
Note the install guide says to run $ jdev
from command line, surely this means
$ ./jdev
instead. Tried it verbatim but get
hj54@devhost:~/downloads/oracle/10g/jdeveloper10.1.3pre/jdev/bin> jdev
bash: jdev: command not found
Distro is Novell Linux Desktop ( Suse 9.0 )

ls -la runInstaller
Check permission, that user can run.(execute)
By the way, if you use "oracle" user rune it...
Please Extract Oracle Source by oracle user.
Or user root user and change permission source ...
root$ cd SOURCE
root $ ls -la runInstaller
root$ chown -R oracle:oinstall .
example:
$ cd Disk1/
$ ls -la runInstaller
-rwxr-xr-x 1 oracle oinstall 1756 Mar 12 2008 runInstaller

Pages downloaded from the App-store refuses to save: Permission denied. How can I download a new one?

Pages downloaded from the App-store refuses to save: Permission denied. How can I download a new one? Please Advice .

Is the computer yours, and are you the Administrator or a user with administrator rights? Are you allowed to install software on the computer?
Check your "purchased" list. Pages should show there, and if it's not installed it should read "install" next to it.
Have you tried another mac? You can install the purchased software on another Mac by using your AppleID that you purchased the software with on the first mac.
And yes, kerropas se viesti

Error while consolidating (The operation couldn't be completed. Permission denied)

I have just bought a new MacBook and that has given me extra harddrive space, and now I am trying to consolidate some masters in Aperture, that I have on my Time Capsule. But I get this error:
Error while consolidating (The operation couldn’t be completed. Permission denied)
I can access my Time Capsule in Finder perfectly well. Can anyone help?

I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-)

Why The SELECT permission was denied on the object 'Facts', database

What this error means?
I have configured Data Source to use a specific Windows user name and password. The SQL database have the windows user account with db_owner rights.
Error 11 OLE DB error: OLE DB or ODBC error: The SELECT permission was denied on the object 'Facts', database 'Customer_2011_CBA', schema 'dbo'.; 42000.
Error 12 Errors in the OLAP storage engine: An error occurred while processing the 'Facts' partition of the 'Facts' measure group for the 'Customer 2011 CBA Cube' cube from the Customer Analysis Services 1 database.
Kenny_I

I'm beginning point:
Error 11 OLE DB error: OLE DB or ODBC error: The SELECT permission was denied on the object 'Facts', database 'Customer_2011_CBA', schema 'dbo'.; 42000.
Error 12 Errors in the OLAP storage engine: An error occurred while processing the 'Facts' partition of the 'Facts' measure group for the 'Customer 2011 CBA Cube' cube from the Customer Analysis Services 1 database.
The Windows account do have right in the SQL Server->Object Explorer->Databases->'Customer_2011_CBA'->Security->The user->Properties->All server roles
Kenny_I
can you try your SQL account?
If you think my suggestion is useful, please rate it as helpful.
If it has helped you to resolve the problem, please Mark it as Answer.
Sevengiants.com

Permission denied on the RedHat 6.2

Similar Messages

Maybe you are looking for