Permission error when capturing

when try and capture now says "file error: access denied". i know this is a permission error but where am i being blocked at?
permissions are open for final cut and my hard drive. is this a firewire permission thing?
please help! what am i missing?

figured it out: had to reset scratch disks.
thanks.

Similar Messages

Permission errors when using File Sharing

I am having permission errors when trying to transfer from Mac to Mac over the network using Filesharing.
I mount the other computer, but when I try to copy I get:
"You may need to enter the name and password for an adminstrator on this computer to change the item named "xxxxxx""
(but I am signed in with adminstrator accounts)...I click continue then get:
"The item "xxxxxx" contains one or more items you do not have permission to read. Do you want to copy the items you are allowed to read?" ....I click continue then get:
"The operation cannot be completed because you do not have sufficient privileges for some of the items"
thanks

I had to reset the permissions on the "other" machine as well using the Installation boot disk.
That seem to fix the issue.

Permission error when syncing

I just started getting a permission error when I tried syncing my iPhone, than iPod to iTunes.
Have tried all the normal options, reboot iPhone, iPod and iMac, but still getting error.
Any suggestions?

I uninstalled, than reinstalled iTunes and it is working again.

Permission error when saving as pdf

I am using 10.6.7 on a Mini and I get a error when saving a documetn as a PDF. It says I don't have permission to save the file.

Hi Arnis,
I have also posted this separately.
Following is the ditamap i am using to create the PDF. This has booktitle, front matter, toc, chapter and backmatter. I am able to generate a PDF (complete with title page, toc, chapter, backmatter, index) using fop 0.25. However, when I try to create a pdf in FM 9.0, I get only the chapter. How can get the others through FM 9.0. Please provide a solution.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE bookmap PUBLIC "-//OASIS//DTD DITA BookMap//EN" "bookmap.dtd" [

<?Fm Validation Off?>

]>
<?Fm Condition DITA-Topicref Blue NO_OVERRIDE show?>
<?Fm Condition FM8_SYSTEM_HIDEELEMENT AsIs NO_OVERRIDE hide?>
<?Fm Condition FM8_TRACK_CHANGES_ADDED Forest%20Green SINGLE_UNDERLINE show?>
<?Fm Condition FM8_TRACK_CHANGES_DELETED Red STRIKETHROUGH show?>
<?Fm BoolCondExpr "" State 0?>
<?Fm TrackChange Off PreviewState PREVIEW_OFF_TRACK_CHANGE?>
<bookmap
    xmlns:ditaarch = "http://dita.oasis-open.org/architecture/2005/">
<booktitle><mainbooktitle>Management</mainbooktitle>
<booktitlealt>Version 4.0</booktitlealt>
<booktitlealt></booktitlealt></booktitle>
<frontmatter><notices></notices>
<booklists><toc navtitle = "Contents"/></booklists>
<preface id = "preface">
<topicref navtitle = "Preface" href = "nm\concepts\nm_Preface.xml"
    type = "concept"><?Fm Condstart DITA-Topicref?><?Fm Condend DITA-Topicref?></topicref></preface></frontmatter>
<chapter navtitle = "Management" href = "nm.ditamap"
    format = "ditamap" id = "chapter"><?Fm Condstart DITA-Topicref?><?Fm Condend DITA-Topicref?></chapter>
<backmatter><booklists><indexlist navtitle = "Index"/></booklists></backmatter></bookmap>

Write permission error when Save for Web & Devices

I'm using PS5.1. When I try to Save for Web & Devices I'm getting write permission errors. I haven't used this application for over a year, but it used to work fine. I'm not sure what changed.
I also used the Mac Disk Utility to Repair Permisions, but that didn't help.
Please help.
Thanks!

The problem could be related to Mavericks permission problems. You can try the Bridge fix:
Open Finder > (go) Computer > Macintosh HD (for me) > Users > Click once on the Home icon (main admin) > Get Info >
click on lock and authorise bottom right > click on cog wheel drop down > click on 'Apply to enclosed items' > OK

General Error when capturing

I try to capture from a VHS tape deck thru a Sony DCR-TRC460 camcorder. The signal is reaching the computer because I see it in the Capture window. When Capture Now is clicked, it alerts "General Error" and the capture window goes away. Click Capture Now again and General Error again. Easy Setup set to DV-NTSC DV Converter.

This is from the browser.

I got a write permission error when i was finalizing my iMovie. What should i do

I got a write permission errow when I was finalizing my iMovie. What should I do?

Are you running Time Machine? If so, there is a bug. You can solve this by
1) Go to System Preferences/Time Machine Preferences and turn off Time Machine
2) Now Share or Finalize your movie
3) Don't forget to go back and turn Time Machine back on

Permission error when WebLogic Server starts up

Dear WebLogic gurus
When I try to startup WebLogic server with 80 listening port in Solaris 2.6,
it did not startup due to permission problem.
The error log said that
Sat Dec 11 06:11:02 GMT 1999:<E> <ListenThread> **** Unable to create server
socket. Perhaps another process is using port 80.
Sat Dec 11 06:11:02 GMT 1999:<E> <ListenThread> java.net.BindException:
Permission denied
To solve this problem, I just tried to startup WebLogic with root user
because I was sure that another process did not run with port 80.
It works now but with only super user. This kind of problems did not happen
with 7001 port.
What's the reason of this ?
Thanks in advance

Hi there.. Looking at your error, it appears that you there is a web server
already running and bound to port 80. Check with your system admins to see if
you have a web server installed on port 80. Another easy way to figure out
would be a simple telnet to your server name at port 80. Try this:
$ telnet localhost (or servername) 80
GET / HTTP/1.0
If that works any returns any data, you've got a webserver running at port 80.
Work with your system admin's to turn off that running webserver and picking
another port for WebLogic.
Under UNIX, anything under port 1024 is considered a privileged port and root
would have to start the server to be able to bind to port 80. You'll also want
to enable the setUID program in weblogic.properties. Look for the following
lines in your weblogic.properties and see if they apply.
# UNIX only: If running on port 80 on UNIX, enable the setUID program
#weblogic.system.enableSetUID=false
# UNIX only: Unprivileged user to setUID to after starting up
# WebLogic Server on port 80
#weblogic.system.nonPrivUser=nobody
Hope this helps.
--Vinny
Changyong wrote:
Dear WebLogic gurus
When I try to startup WebLogic server with 80 listening port in Solaris 2.6,
it did not startup due to permission problem.
The error log said that
Sat Dec 11 06:11:02 GMT 1999:<E> <ListenThread> **** Unable to create server
socket. Perhaps another process is using port 80.
Sat Dec 11 06:11:02 GMT 1999:<E> <ListenThread> java.net.BindException:
Permission denied
To solve this problem, I just tried to startup WebLogic with root user
because I was sure that another process did not run with port 80.
It works now but with only super user. This kind of problems did not happen
with 7001 port.
What's the reason of this ?
Thanks in advance

Timecode error when capturing with USB in Premiere Elements 7

When trying to capture video from my DV I get an error "\src\Timecode.cpp-955" and PE7 crashes.
I upgraded from PE2 to PE7, and I just checked that it still works in the old version.
I'm using a USB cable, so the Device Control is set to USB Video Class and split scenes are set to content. The camera is a Panasonic NV-GS300 and I'm on Win XP Pro with SP3, Celeron 2.8 Ghz, 2GB RAM.
Any ideas?
Will a firewire solve my problem?

I would not recommend capturing over USB in Premiere Elements -- even though it supposedly works with USB Video Standard 1. The results are too inconsistent and problems, at least in my experience, are common. It's really a pretty obsolete video capture method.
Try it with FireWire and you'll likely see the problem go away.
But it still might not hurt to make sure everything is updated on your computer -- that you're using XP SP3 and that you have the latest Quicktime and firmware for your graphics card.
http://www.adobeforums.com/webx/.3c057647

Solved, permission error when creating Flash Clip

My new HP PC is equipped with a device called a personal media drive (K:\). When I tried to and write to this new external drive when creating a Flash clip for the first time, I was unable to do so because I did not have permission. After much searching, I determined that this error is not an Adobe error, but rather a Windows error in Vista. I accessed the drive in explorer, right clicked on it and went to properties. By following the tabs, I was eventually able to enable sharing and grant all permissions to the drive. Once this was done, I was able to successfully render out a .flv file without no diffuculty and withut needing to restart the computer.
Please, all users, when you do eventually solve your problems, do post your results. Forums are such depressing places to visit otherwise. Registration is pretty quick and "paying it forward", is just being a good human.

ChojinDSL wrote:
However, when I try to run gitosis-init as the git user I get the following error:
IOError: [Errno 13] Permission denied: '/usr/lib/python2.7/site-packages/soaplib-1.0.0_beta8-py2.7.egg-info/top_level.txt'
What are the permissions of that file? Did you use a restrictive umask while building gitosis-git?

[solved] Permission Error when trying to run gitosis-init

Im trying to install a git repository using gitosis, as described in the Arch Wiki:
https://wiki.archlinux.org/index.php/Gitosis
However, when I try to run gitosis-init as the git user I get the following error:
sh-4.2$ gitosis-init < /srv/id_dsa.pub
Traceback (most recent call last):
File "/usr/bin/gitosis-init", line 5, in <module>
from pkg_resources import load_entry_point
File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 2691, in <module>
add_activation_listener(lambda dist: dist.activate())
File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 668, in subscribe
callback(dist)
File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 2691, in <lambda>
add_activation_listener(lambda dist: dist.activate())
File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 2192, in activate
self.insert_on(path)
File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 2299, in insert_on
self.check_version_conflict()
File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 2338, in check_version_conflict
for modname in self._get_metadata('top_level.txt'):
File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 2186, in _get_metadata
for line in self.get_metadata_lines(name):
File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 1174, in get_metadata_lines
return yield_lines(self.get_metadata(name))
File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 1166, in get_metadata
return self._get(self._fn(self.egg_info,name))
File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 1281, in _get
stream = open(path, 'rb')
IOError: [Errno 13] Permission denied: '/usr/lib/python2.7/site-packages/soaplib-1.0.0_beta8-py2.7.egg-info/top_level.txt'
It works if I run gitosis-init as root. But I'd rather avoid that.
Any ideas on how I could fix this?
Last edited by ChojinDSL (2011-03-16 12:29:54)

ChojinDSL wrote:
However, when I try to run gitosis-init as the git user I get the following error:
IOError: [Errno 13] Permission denied: '/usr/lib/python2.7/site-packages/soaplib-1.0.0_beta8-py2.7.egg-info/top_level.txt'
What are the permissions of that file? Did you use a restrictive umask while building gitosis-git?

Unknown file error when capturing in FCP 6

I capturing from a DVD, using AJA Kona card, component in. I can preview the video in Log & Capture, but when I try to Capture Now, I get an unknown file error and cannot capture. Just a regular DVD, analog capture. I've tried creating new projects. I save to an internal HD with over 300GB of available space. What am I missing?

If it is a data file drag and drop it on your desktop and open it.
If it is an encoded movie file can you play it? If so you can use the software I suggested to rip it from the DVD.
Give it a go.

Error when capturing excise invoice

Dear guys,
I am unable to capture excise invoice in J1IEX. After entering all the values and when i click on the check button, am getting "Run time error- description". Short Text " Division by 0 (Type p) in progran SAPJ1IEX.
Runtime errors : BCD_ZERODIVIDE
Exception : CX_SY_ZERODIVIDE.
Kindly help me to resolve this issue..Thank you..

Hi,
Check in J1IEX, under "Duty Values" tab,
Whether your Excise Duties (BED, ECS & SECess) are greater than the Excise Base Value.

Permission Error when copy files into cmsdk using NFS with non admin user

Hi All,
We are using CMSDK with NFS protocol and we have created different users with ACL to control different access for users.
When we copy files into cmsdk folders using one of the admin user this works fine, even a multiple copy works fine. But when we use any non admin user , some time copy commands works but some time it throw a permission deny error. and this is happening very intermittently.
when we use ftp protocol and ftp file it's all works fine for the both admin & non admin user. Is there any limitation in using CMSDK NFS protocol
Did any one encouter any similar issue. Any pointers would be of great help.
Thanks in advance
Regards,
Navin

Hi All,
We are using CMSDK with NFS protocol and we have created different users with ACL to control different access for users.
When we copy files into cmsdk folders using one of the admin user this works fine, even a multiple copy works fine. But when we use any non admin user , some time copy commands works but some time it throw a permission deny error. and this is happening very intermittently.
when we use ftp protocol and ftp file it's all works fine for the both admin & non admin user. Is there any limitation in using CMSDK NFS protocol
Did any one encouter any similar issue. Any pointers would be of great help.
Thanks in advance
Regards,
Navin

Operation not permitted - Permission errors when restoring

Hi Guys,
I'm trying to restore some files from a time machine backup from a DIFFERENT machine (i.e. browse other Time Machines) to a different laptop.
BOth machines run 10.6. When using Time Machine it didn't want to know about it with the graphical restore.
I tried the browsing via Finder and drag/drop onto the new machine's desktop and no joy - error messages.
Finally, I used the command line and the even used sudo, but got this error:
mv: Linwood College//10Bi SS/Global Terrorism/Rainbow warrior comic.comicdoc: Operation not permitted
The command I used was:
MacBook:Grad School sam$ sudo mv -f Linwood\ College/ ~/Desktop/
I did enter my password too, which is an Admin account on the machine.
Any suggestions on how I can recover these files? I'd really like to get them off the external hard drive before I give up and wipe it.
Appreciate all help in advance.

shanachienz wrote:
Hi Guys,
I'm trying to restore some files from a time machine backup from a DIFFERENT machine (i.e. browse other Time Machines) to a different laptop.
BOth machines run 10.6. When using Time Machine it didn't want to know about it with the graphical restore.
What does that mean? Did you get an error message? If so, what? If not, what happened?
You should be able to restore to an "alternate location," per #16 in the Frequently Asked Questions *User Tip,* also at the top of this forum.

Permission error when capturing

Similar Messages

Maybe you are looking for