Permission errors in /home

Hi, I've searched the best I could do to find a solution to this problem, but I haven't found one yet!
So, on my fresh Arch install, I followed the newbie-guide and installed XFCE. I encountered a problem with permissions:
First, I couldn't even start xfce without being root. I fixed that by chowning .ICEauthority in /home/vertigo to vertigo. Secondly, I got some error about Dbus I think(Can't remember, but I don't get it anymore), that was fixed by chowning the whole /home/vertigo folder+subfolders. This was however not a overall great way to solve it, as the problem still remains on certain places. For example, when I try to open Namoroka, it asks for a user profile, and as I don't have one, I shall create one. But this isn't possible as it says permission denied when trying to create a folder for the user(in the default folder which is /home/vertigo/.mozilla/firefox/).
A friend also have this problem, and he "solves" it by chowning his home folder all the time, and that's just ridicolous.
I would be glad for any help here!
Thanks!

Can you post the list of files that don't belong to vertigo but are in his home or subfolders?
> If it is necessary to chown your home directory over & over
Only if you chown it back to root in the meantime:
root -> vertigo -> root -> vertigo -> ...

Similar Messages

Web-Disk on OSX 10.9 Give me this error: "Finder got an error: Network file permission error."

Previously I was using OSX 10.8 and Web Disk was working great.
Since I upgraded to OSX 10.9 Web Disk Dont Attach to my compputer and give me this ERROR:
FInder got an error: Network file permission error.
When I got this ERROR first time I searched GOOGLE and found this link: http://cammodude.blogspot.no/
And I did:
To force all connections to be SMB1:
Open A terminal window
paste in the following line followed by the return key(should be all on one line):
echo "[default]" >> ~/Library/Preferences/nsmb.conf; echo "smb_neg=smb1_only" >> ~/Library/Preferences/nsmb.conf
What the command does:
Creates a file called nsmb.conf in your home directory at the path ~/Library/Preferences/nsmb.conf.
Adds directives to force SMB connections to use the SMB1 protocol. This is slower but stable.
Then I could use Web Disk on OSX 10.9 after executing this command in Terminal.
But now I restarted my Macbook and now Im NOT able to connect to Web Disk and get the same ERROR.
FInder got an error: Network file permission error
After trying 100 times it attaches 1 time but then show this ERROR:
Can't get <<class cdis>> "my.server.com/2078" of application "Finder".
If this happen then I can see the files in Finder and see the Contents and Size of files but if I open a PHP file in BBEdit then it shows BLANK.. But actually it is NOT blank.
Now Im stuck How can I solve this? All help is highly appericated..
Thank you so much...

Hi,
Make sure to chmod the app, something like this :
chmod -Rf 777 secure_site_WebDisk.app
(in my case the CPanel provided the app for my OSx version.)

Dropbox Permission Error

My iPhone 4 now cannot sync with my windows vista computer. "Storing home folder on a network share can also cause an error. This computer is stand alone and not on a network unless dropbox.com and sharing files with invited friends constitutes
a "network".
Dropbox Permission Error - I checked the Temp file and all users allowed full control. I couldn't edit as "full control" was already marked. Checked inheritable permissions as well. Running
Vista Service Pk 1, Avast 2014.9.0.2018. Dropbox running in Windows XP compatibility mode. I realize Vista is no longer supported. Is Avast preventing access to the home folder on the Dropbox.com site?

This is related to DropBox. Please post your question here :
https://forums.dropbox.com/
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

File permission error; NI-488: DMA hardware error detected

I'm running LabVIEW 8.0 on the latest supported SUSE linux. My vi saves a data file. If I save a file named "/home/bill/LabVIEW/data/file.dat," it saves okay the first time. But then if I run the program again, it gives me an error instead of just writing over file.dat (which is what I want it to do).
Error 8 occurred at Open/Create/Replace File in filename.vi
Possible reason(s):
LabVIEW: File permission error.
NI-488: DMA hardware error detected.
Also, I don't know if this is related, but when I click on the folder icon to the right of the file path on the front panel, and navigate to the directory mentioned above, then type "file.dat," I get the message "/home/bill/LabVIEW/data/file.dat does not exist." Shouldn't this *create* the new file?
Thanks,
Bill

You should really start your own thread describing your problem in detail. One of the issues here is that there are two possible sources for the error code 8. Which one is applicable to you? What platform are you on? What version of LV? What are you trying to accomplish? What exactly triggers the error?
Please start again with your own thread and with the answers the questions I asked (as well as anything else that you think might be of value).
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Java update 6 causing constant permission errors

Hi Folks
I was looking for a little more experienced thoughts about the numerous persistent permission errors caused by the last java update for apple's software update. I've read forum articles that says it's OK to ignore them. And the Apple Support KB page that list the dozens of errors that can be safely ignored. But it just doesn't feel right. I'm tempted to revert to a pre java update backup version of the OS, that repair permissions gave a clean bill of health to it's screen. My question is; By not updating java Do I have more risk than by running with all the constant errors caused this update in file permissions? In trying to learn more about java I found among other things these snippets from Boutell.Com
However, most people do not have Java applications on their computers these days, and most websites useFlash instead of Java for the interactive features that used to be commonly written in Java.
Removing Java on MacOS X
Removing Java on MacOS X is not recommended as Apple has made Java a standard part of the operating system and may rely on it to a greater degree than a typical Windows system.
What you should NOT do
Either update Java, or remove it. Do not refuse the updates. That gives you the worst of all possible worlds: a buggy old version of Java that might be exploited by
maliciously coded web pages.
Just wondering what others thought about this. And just how useful is java these days? Is it true Java has been dropped from OS 10.7? Hopefully, Flash is on the way out too.
Well thanks for considering this.
Paul
Here is the list of errors encountered every time the repair permissions script is run;
Repairing permissions for “Macintosh HD”
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/dt.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/dt.jar".
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar".
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r", should be lrwxr-xr-x , they are lrw-r--r-- .
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r".
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/management- agent.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/management- agent.jar".
User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib", should be 0, user is 95.
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib".
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/dt.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/dt.jar".
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/jce.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/jce.jar".
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/management -agent.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/management -agent.jar".
Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/security/b lacklist", should be lrwxr-xr-x , they are lrw-r--r-- .
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/security/b lacklist".
User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries", should be 0, user is 95.
Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries".
Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Home/lib/security/cacerts", should be lrwxr-xr-x , they are lrw-r--r-- .
Repaired "System/Library/Java/Support/Deploy.bundle/Contents/Home/lib/security/cacerts".
Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Repaired "System/Library/Java/Support/Deploy.bundle/Contents/Resources/Java/deploy.jar".
Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Repaired "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar".
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar".
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar".
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ", should be -rw-r--r-- , they are lrwxr-xr-x .
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ".
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar".
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib", should be 95, user is 0.
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib".
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar".
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar".
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar".
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist", should be -rw-r--r-- , they are lrwxr-xr-x .
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist".
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries", should be 95, user is 0.
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries".
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle", should be drwxr-xr-x , they are lrwxr-xr-x .
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle".
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar".
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib".
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Home/lib/security/cacerts", should be -rw-r--r-- , they are lrwxr-xr-x .
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Home/lib/security/cacerts".
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/deploy.jar".
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/Java/libdeploy.jnilib".
Permissions repair complete

I don't see those errors, but Disk Utility cannot fix anything related to symbolic links, so all I can recommend is to ignore them. Your other option is to reinstall the OS and then run Software Update, after making a bootable backup/clone.

Error creating home directory - Access is denied.

Hi,
I am getting one issue on the task while provisioning homedrive and homedirectory on AD resource.
Error creating home directory '\\rusehf06\home\rc9782rf': ': Access is denied
Please help. Thanks in advance.

These error messages are typically pretty obvious with permission errors. It's getting the correct permissions that is the challenge. I would suggest you start by adding the user whom is in your IT Resource for Active Directory into the local administrators group for the server you are trying to create the folder on. Also, consult with your AD Admins to get it resolved the quickest most likely. Their skill set will be better than what we can provide.
-Kevin

HT5096 What about the permission errors from ACLs when you try this?

I followed the instructions for using Finder to copy the Backups.backupdb directory and get permission errors. Another post says to use DiskUtility restore. I guess I'll try that after wasting a day.

Hi -- we copy zip files and move them from one site to another. Prior to zipping, we have to push the permissions through on the home folders. Perhaps you should do this. Just do a get info on the folder and apply permissions to internal folders. However, this will not capture hidden folders.
If you are on a local workstation and are backing up the home, to reset the permissions (ACLs) -- just reset the password (you can even reset it to the same password).
Don't know if this info will help --

Write permission error when Save for Web & Devices

I'm using PS5.1. When I try to Save for Web & Devices I'm getting write permission errors. I haven't used this application for over a year, but it used to work fine. I'm not sure what changed.
I also used the Mac Disk Utility to Repair Permisions, but that didn't help.
Please help.
Thanks!

The problem could be related to Mavericks permission problems. You can try the Bridge fix:
Open Finder > (go) Computer > Macintosh HD (for me) > Users > Click once on the Home icon (main admin) > Get Info >
click on lock and authorise bottom right > click on cog wheel drop down > click on 'Apply to enclosed items' > OK

Sharing video using MPEG2 comes up with no permission error, what do i do?

When I go to share my video using the MPEG2 setting, and I keeps throwing a permission error. Changing the file output location, running as admin, changing codec settings, making a new project all have not worked.
I also cannot burn to a disc as it throws a transcoding error, but I'm not sure if that's related to the first issue.
I am using Premiere Elements 10.
Thanks

Christopher
Thanks for the reply.
You have 2 known Premiere Elements 10 issues that need clearing out of the way to see what, if anything, is behind them.
1. There is a serious problem with Premiere Elements 10 run on a computer that uses a NVIDIA GeForce card.
ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
The answer has been and is to roll back the driver version to about May 2013 (no typing error). In your case, Windows 7 Home Premium 64 bit and the NVIDIA GeForce GT-545
As you see, the oldest driver version is July 1, 2013. That driver version may not be old enough. But worth a try if no where to go.
2. Please install QuickTime latest version on your computer with Premiere Elements.
Once both are ruled out, then back to the present....
1. You say
Every instance of using the MPEG2 codec it has always asked for activation instead of saving the code I put in.
Here is the error message I am getting:
Interesting, since I might expect to see an error message specific to MPEG2 Activation there instead of Error compiling movie.
You report that export to file MPEG2 and burn to DVD disc result in this error. What happens with burn to Folder (4.7 GB)? Same thing?
If none of the above, two possibilities
a. Uninstall, free ccleaner run through, reinstall with antivirus and firewall(s) disabled.
b. Create a new user account with administrative privileges and install and try to run Premiere Elements 10 from there.
Please review and consider.
Thank you.
ATR

2008 Macbook OS 10.7.5 disk permission errors, freezes

Hi, I have a 13" early 2008 MacBook 4,1, described as:
Processor 2.4 GHz Intel Core 2 Duo
Memory 2 GB 667 MHz DDR2 SDRAM
Graphics Intel GMA X3100 144 MB
Serial Number W88280ZR0P6
Software Mac OS X Lion 10.7.5 (11G63)-
A few days ago it froze on startup. It loaded to my home window, I could move the cursor, but couldn't click on anything.
I got around that by unplugging from the wall and the battery, then it would run all right for a short while, then freeze again.
Ran Disk Utilities, verified and repaired the disk, and then found over 1,000 disk permission errors. Permissions errors were mainly from Safari or Itunes, a typical message line reads:
Permissions differ on "Applications/ITunes.app/Contents/Resources/tr.Iproj/InforDialogue ArtworkVieww.nib",should be drwxr-xr-x, they are -rxwr-xr-x.
I have the utility repair the disk permissions, which it says it does, then clear the window, and restart. When I go back to disk utiities, all the errors are back again.
I don't know what to do next. Re-install the Operating System? Get rid of Safari? (I hardly ever use ITunes, the other main source of error messages.) Take the machine to the local Mac shop? Any advice or insight would be appreciated.

Open Users & Groups preferences. Click on lock icon and enter your admin password. Click on the Add [+] button below the users list. Configure the new account and be sure to check the box for an Admin account. You also need to change the auto-login account which is done in Login Options. Log out of your account then log into the new one.
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

Network file permission error and Log??? Need help...

Hi everyone!
Based on what I learned here:
http://discussions.apple.com/thread.jspa?messageID=1760312&#1760312
I have a log in my script like this:
set log_path to (startup disk as string) & "Applications:My Folder:My Log"
set the_date to (current date) as string
set logfilecontent to (open for access file log_path with write permission)
try
write the_date & return & "Here's my Log:" & return & "item1" & return to logfilecontent starting at eof
on error
close access logfilecontent
end try
close access logfilecontent
It has always worked but this is part of an app. I just realized that this will work on my admin login but not on a regular login (I mean logging into the computer). And if I change the owner/group of the app sometimes it will change if I can do it either on an admin login or standard. I often get a Network file permission error and it gets stuck. I know it's something to do with permissions, but maybe I don't fully understand still? I need it so it will work on admin or standard login without that error. In that same link above a user mentions he had the same problem. So there's something I'm just not getting??? And I know it's here with the Log because I took it out and no problem. Hope you guys can help out???
Thanks in advance,
Reg

If the log already exists on the hard disk, you may not be able to write to it from a non-admin account, and you may want to avoid writing to the Applications folder. You can provide an empty log in the expected place which allows all accounts to write to it, but the permissions may be lost when the application is installed.
Alternative options include creating different logs for each account:
set log_path to (startup disk as string) & "Applications:My Folder:" & (do shell script "whoami") & "'s Log"
or writing the log to the account's home folder:
set log_path to (path to home folder as string) & "Library:Preferences:My Folder:My Log"
(17283)

SSIS 2012 package runs under SSDT but fails with permission error from SSMS

I have a simple package that pulls data from a text file located on a Windows file server that runs successfully from SSDT on my client.
However, when deployed and running the package via SSMS from the client, the package fails with a permission error, with the error stating that the data file could not be opened.
I have done some investigation and have seen some info that states that a package run from SSMS runs under the account on which you are logged on to the machine, which I would have thought is correct. This is therefore the same account when running from
SSDT (which works) and I can see from the SSIS Report that the 'Caller' is stated as my account, so if this is the case why isin't the package working.
I've also seen an MSDN forum answer which stated the opposite that the package when run from the IS Catalog in SSMS doesn't run under the account on which the client is logged on with, which is the opposite of the above, but doesn't indicate which account
it is using.
So what account is being used to run SSIS 2012 packages from the IS catalog from within SSMS ?
If it is the account on which you are logged onto the client running SSMS, why is it not working when the account has the necessary permissions (as provent when running from SSDT) ?

I am aware it's using my account and not one of the service. There's nothing in the posts above which suggests I'm using the service account. I don't know why people keep assuming that I'm running the package from a job. I've never stated that in any of
the posts I'm running the package from a job. It's been made quite clear I'm running the package from the IS Catalog on SSMS:
"This is simply selecting a package from the IS Catalog, right-clicking and selecting Execute package.", as per the Nov 18 post, and in the original post "....So what account is being used to run SSIS 2012 packages from the IS catalog from
within SSMS".
Just to be clear, the package is NOT being run from a job. It's using the Execute package option when selecting the package within SSMS from the IS Catalog and it's running under the account on which I am logged on to my client.
Please read carefully. I was just answering your question "So what account is being used to run SSIS 2012 packages from the IS catalog from within SSMS ?" and stating that you where right and that it uses your account to run the package
when you execute a package manually from the Catalog and that you can prove that by logging the system variable.
A good suggestion about using a share in the task to map the drive and I will try this. I would find it strange that SSMS requires this mapping whereas SSDT does not though.
Ok let us know your findings. If it doesn't work you can also test it with a password and username:
net use f: \\financial\public yourpassword /user:username
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

There has been a network or file permission error. The network connection..

hello,
there has been a network or file permission error. The network connection may be lost.
this is the error my client gets sometimes when he wants to save a word document.
when i go in the finder i have no problem accessing that network share, and when i look up the file and check the permissions there is no reason why this error should occure.
situation :
1 os 10.3.9 server
7 os 10.5.5 clients
1 os 10.3.9 client
office 2004 for mac (version 11.50)
there are 2 10.5.5 clients (emacs) with this problem on a regular base (3-5 times a week). One imac 17" 10.5.5 has this once a month.
it is a wired cat5 network.
any idea what could cause this problem?
thanks
Marco

I found a logical explanation on the following site : http://www.makemacwork.com/office-2004-wont-save-to-server.htm , I am gonna try the steps they describe and post back the result.
Marco

FILE not found error: j2ee/home/applib/applications-mapping.xml (No such fi

Hi EveryBody
i have my applications-mapping.xml file already in the applib directory, but when i try to conect to a remote ejb i had this error[b]
FILE not found error: j2ee/home/applib/applications-mapping.xml (No such file or directory)
can anyone help??

gday
Is the error on the client or server?
What role in the application does applications-mapping.xml fulfill?
How are you loading the file in?
-steve-

After installing 10.7.2 from scratch, permission errors remain

Hey, this is a summery of what have happened:
1. upgraded to Lion from SL (via AppStore)
2. have played with 'get info' > 'apply to all enclosed items' :/
3. things have gone messy, slow, permission errors. example:
(Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.)
4. booted from DVD of Lion dmg.
then, formatted and performed a clean install.
(backed up to a new disk image with CCC, just in case)
5. Notice that I did not copy anything or downloaded/installed a single file/application yet.
after the so called 'clean' install, I've ran the disk utility to verify permissions again (both from DVD and from cmd+R - recovery partition).
still I get the warning about ARDAgent, still verifying and repairing permission takes 2-3 minutes. with only the OS X installed on HDD.
6. Got this advice from several boards:
Open Terminal as an admin user.
type in the following:
sudo chmod -RN ~
you will have to authenticate with a non-blank password.
then follow the steps of resetting the ACLs.
I have done this, and got: Failed to clear ACL on file ubiquity.socket: Invalid argument
Then, booted from DVD, in terminal typed: 'resetpassword' and chose the HDD and "user" and clicked on 'reset password and ACLs'.
restarted, Spotlight did index againg.
7. still permission errors, so I didn't copy anything back yet, waiting for help to get the right way or restoring to default/formatting again.
My questions are:
1. Did I do everything right? Is it possible to perform a clean install from the DVD that I made?
2. If so, shouldn't it cancel all the ACLs problems and reset them to the default?
3. Is there a way to make a real 100% clean install of 10.7.2, with erasing even the recovery partition (if it has to do with ACLs)?
4. if and when this will be solved, I will need to copy back my files and folders from external FW800 WesternDigital,
will I need to reset their permissions too somehow? It could cause more problems with the ACLs.
thank you very much.

baltwo,
I have a lion clone. so I guess there is no reason to install lion upon it's own clone.
anyways, how is it possible that after the complete format, the ACL problem remains.
what about removing the recovery partition.
the reason I want it to be done is to get rid of the problems I had with the new installation, tham I'm afraid will not be fixed otherwise: crashing apple applications (safari quitted unexpectedly), slow performance, computer freezes, GUI lags (copying 138 items to another folder stucks and I have to relounch finder) and other animation bugs at almost everywhere on the system.
restoring lion clone and turning on the time machine sounds like the last option right now...
and I'll be happy to hear opinions about what to do with the backed up data on the external hdd permissions.

Permission errors in /home

Similar Messages

Maybe you are looking for