Permission problem: Correct roles for ESS??

Hello to all,
I have implemented ESS for mySAP ERP 2005. If I start ESS in portal, it only works fine when the backenduser in mySAP ERP2005 has sap_all permissions. If I delete it and try only with some ESS roles I get an error like not having the correct permissions to start XssMenu.
Can anybody tell me which roles and/ or profiles I had to add to these users? At the moment I only added the SAP_EMPLOYEE_ERP role but it seems that is is not the whole solution.
Any ideas?
Regards,
Frank

You no longer can upgrade to Mountain Lion. You need to first reinstall Lion to try and correct your mistake.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
In the future leave permissions alone. They should never need changing.

Similar Messages

Roles for ESS and MSS Enhancement Package 4 (EHp4)

Good afternoon.
I have the following doub with the role assignment for ESS .
I know that exist the following roles for ESS :
SAP_ESSUSER: Single role that comprises all non-country-specific fucntions. Only relevant for the olders ESS functionality, including all ITS component, such as PZ02(Address), PZ13(Personnel Data), PZ03(Bank Details).
SAP_ESSUSER_ERP05: Single role that comprises all non-country-specific fucntions. Relevant for the ERP2005 platform, Enhancement Package 1 and 2.
SAP_ESSUSER_ERP13: Composite role that comprises all non-country-specific functions. Relevant for the ERP2005 platform, Enhancement Package 3.
SAP_ESSUSER_ERP05_xx: Single role that comprises all non-country-specific fucntions. A separate role exist for each country version(xx = Country ID). The role corresponding composite role is SAP_ESSUSER_ERP05. Relevant for the ERP2005 platform, Enhancement Package 1 and 2.
The Question is:
I am working with Enhancement Package 4 EhP4, What is the role that I have that use????
Kind Regards.

Hi! The specific ESS Role for EHP4 is called SAP_ESSUSER_ERP_14.
Due to an error, the Role was not delivered in SAP ECC 604, but it will be available in the Support Package 05 for EHP4. You can hope to implement the SP or go for manual corrections from Note [1373177|https://service.sap.com/sap/support/notes/1373177].
1229232 and 1129412 notes are relevant for EHP3 only.
Refered to MSS you're right.
Regards!

Two roles for ESS

Hi Experts,
I have to create two roles in ESS. One role should have authorization to edit his personal info banck details etc. and other role should not edit any info.
How to do this??
Please reply me
Points will be rewarded..
Sameer

Hi Sameer
Making a copy of the role is not enough.
You will have to take this approach as I have a similar issue and this is what i did to resove it.
You have two roles but both the references would be to the iviews that reside in the original sap provided folder.
First of all create custom resources with custom pcd url location. Update pcd url from the custom roles and this will solve your problem.
if you dont want to modify the standard entries in resource table then user V_T7XSSSERRESC and make changes.
regards
barin

Problems using Role for Security to business area

I have a role set up with several users in it. User A and user B are both in this business area. When I grant access to a business area using this role, they are unable to see the business area in the user edition. If I specify User A to the business area they can see the business area. This does not seem to happen all of the time. Any solutions for this ?
Has anyone else come across it ?
Thanks
Dennis

You could try this- Tools -> Priviliges -> (Show Privilege for the ROLE not the USER), then see if "Desktop & Plus Privilege" is checked
I was just creating/removing EUL's in my test instance and the same thing happened to me.

Choosing correct BP for ESS

Hi,
I have a ECC 6 system on EP3, it seems to BP version 1.31 is for this ECC version.
When I go to download ESS BP v 1.31 ther are 6 files for SP01 to SP06 respectively.
While deploying BP on portal end should I directly deploy the latest BP file (in this case SP6) or I should apply all of them sequentially.
Thanks,
CD

Hello CD,
While deploying BP on portal end you should directly deploy the latest BP file (in this case SP6)
No need of apply all of them sequentially.
Best Regards,
Deepak

Role Menu for ESS (WDA) in SAP NWBC

Dear experts,
I am implementing ESS&MSS using SAP NWBC. For this use the following documentation:
Configuration of the Role Menu for ESS (WDA) in SAP NWBC - SAP Documentation
SAP delivers the composite role SAP_EMPLOYEE_ESS_WDA_2.
1. Call up transaction PFCG and create or copy your customer-specific role based on the standard shipped composite role for ESS (WDA), SAP_EMPLOYEE_ESS_WDA_2 in the customer name space (Z_*.
I have copied this role with the singles roles
My first question: Should modify my composite role for add a new folder that content two applications WDA customer or this should do it in the single role ? How Can do it?
My second question:
What I dont can display the folder in top screen "Employee Self-Service"---"Employee Self-Service XX"---"Employee Self-Service2"(See Image leff)
Thanks

Hi Armin,
For NWBC you must place transactions under the second folder down (or at least this is how its works for NWBC for ERP roles). Standard NWBC roles have 'Role menu' as top folder and then (generally) one main folder under that - like 'Purchasing'. Transactions should go under this folder or under subsequent sub-folder.
There are additional parameters using right click 'Details for Net Weaver Business Client' under PFCG also - but assume your documentation has explained this to you.
Regards,
Craig

Standard roles in ESS and MSS

Hi All,
Can somebody help me to get the standard roles for ESS and MSS
Thanks in advance.
Suresh

Hi Shankar,
After searching roles I have found below roles.
ESS roles
SAP_EMPLOYEE_IN_ESS_WDA_1
ESS Single Role for India
SAP_EMPLOYEE_IN_ESS_WDA_2
ESS Single Role for India
MSS roles
SAP_MANAGER_IN_MSS_NWBC
Manager Self Service: India
SAP_MANAGER_MSS_NWBC
PFCG Role for the Manager
SAP_MANAGER_MSS_NWBC_2
PFCG Role for the Manager
SAP_MANAGER_MSS_NWBC_3
Composite Role Manager Self-Service (WDA)
SAP_MANAGER_MSS_OTH_NWBC
Manager single role for the Applications from Remote systems
SAP_MANAGER_MSS_SR_NWBC
Single Role for the Manager Containing Menu Structure for NWBC
SAP_MANAGER_MSS_SR_NWBC_3
Single Role for the Manager Containing Menu Structure for NWBC
SAP_MANAGER_MSS_SUBST_SR_NWBC
PFCG Light Weight Role for the Manager's Assistance.
Could you please suggest me to go ahead with customizing of the above roles.
Thanks
Suresh

Lightroom catalog permission problem!

Hi everyone,
please help me solve this problem. I reinstall OS X last night to new Yosemite. I did clean install. I made TM backup of my old OS X on external LaCie hdd. I copied my catalog from the backup into my pictures folder on an internal hdd. When I tried to open it this message pops up "Lightroom cannot use the catalog named “Lightroom 5 Catalog” because it is not writable and cannot be opened.". Just to be clear the "get info" permissions are set for "Me" R/W. I don't have any different file inside the folder "pictures" only my catalog.ircat. I can't open original file from the LaCie backup, also permission problem. Thanks for help.

it's all ok. The file for some reason have some info written about the owner. I did change that but it does not matter and still don't work. If I want rename the file then I have to put the password and that is why LR can't work with it. I found the solution already (after 5 hours searching the internet) This helped me http://backdrift.org/fixing-mac-osx-file-permissions-and-acls-from-the-command-line I used sudo chmod -N /here is path to the file/ and enter. This solved all my trouble and I can open the catalog without problems.

Facing permission problem for accessing database

{color:#0000ff}Hello All,
I have just started in this forum. I am very new to j2me and facing problem and I need your help.
I had successfully signed the application and it was working properly on device. Next I added login module in my application where I am accessing a PHP from server which is having MySQL DB connection for usercheck. When I try with unsigned jar it works properly and when I try using signed jar it is showing me wrong username/password. I think it is midlet permission problem.
It would be very nice if someone can tell me what might be the possibilities that it is going wrong.
Thank you.
Regards,
-Anuradha{color}.

Signing MIDlet has nothing to do with how data is send over the network. So please be sure that your signed MIDlet is not corrupting your data.
If you are receiving correct username / password at server side, then its server's responsibility to validate it Your MIDlet has posted the parameters right way.
I would suggest you to check following things
1) Check if server is validating the username / password.
2) What response does server sends you back after validating username / password. Check on both ends.
3) Check how your midlet processing the response from the server.
4) Do you get any exceptions?
but I am doing database connection through php which is on server, I hope it is not wrong way of doing it.Doesn't matter what technology is used at server side to connect to the database.

ESS page Navigation problem EP7.0 for ERP2004

Hi
How are you?
We made ESS configuration in our new NW04s SP10 portal.
We use ECC 5.0 as back end. As we cant install the XSS component for ERP2004 in NW04s, we add java stack in ECC 5.0 machine and installed the XSS and JCO and all there. And imported the BP for ESS 60.2 in portal EP7.0.
Now everything is working fine that one problem.
The problem is related to link in portal. When I click the ESS overview menu, I get the the overview with ESS menu inside the page.
But if I click again in ESS overview menu, it changes to the overview with ESS menu inside the page. If I click again it change to first style. What I mean is, it change the every alternative time. I made all the PCD setting in IMG. And when I get the second view, and if I click in any link, the top level navigation will not work after that.
Do you have any idea why it is so and how to fix it?
I appreciate your support.
Thanks
Raibin

It might seem like not a big problem at first, but this can be a major problem. If you are implementing filters and routing their in web.xml, you will not get the intended effect. For example, I use a filter to make sure that the user has logged in before accessing a page in the /app directory. The filter is not applied AT ALL the first time the user tries to go into the /app directory. Any way to make JSF shows the correct URL?

Why am I getting an error stating this version of iTunes has not been correctly localized for this language. Please run the English version when I just bought a song yesterday and had no problems

I have iTunes running on my Windows8 desktop for some while with no problems. Yesterday I purchased a song, deleted a free game app. and upgraded to the most current version of iTunes. This morning I could not pull up iTunes, so I retored my iTunes to a setting two (2) days ago. Now, as soon as I try to start iTunes I get a message stating: This version of iTunes has not been correctly localized for this language. Please run the Enclish version OK. So I hit the OK button and nothing happens. Please help.

Hi there GloriaNM,
You may want to try removing and reinstalling iTunes as an initial troubleshooting step. Take a look at the article below for more information.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
-Griff W.

Best Practice for ESS/ MSS role customization

Hi ,
I would want to know the best practice for role customization for ESS / MSS business package . For eg if my company does not want to use someof the workset like working time , travel etc , what is the best practice for this scenario .
anEEZ

Hi Aneez,
This is the link for complete best practices on NetWeaver
http://help.sap.com/bp_epv260/EP_EN/index.htm
Browse the Busines scenarios, you will find what you are looking for.
Now, these ones is specific for ESS and MSS
http://help.sap.com/bp_epv260/EP_EN/html/EP/N26_ESS.htm
http://help.sap.com/bp_epv260/EP_EN/html/EP/N27_MSS.htm
Hope this helps,
Kumar
P.S Reward Points for useful answers.

Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

Hi,
I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder. "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
The files we're shot with HD cameras. Edited in Premiere Pro CS3. I installed the update 3.0.1 with still the same error.
I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash. I tried this twice....
    Thanks in Advance

Hi Hunt,
       Here is the skinny. A window base PC. footage shot with HD sony HD cameras, Project imported to Premiere CS3. Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality. Imported them to Adobe Encore CS3. After about ten files or so. I got the error message. Did all the basic trouble shoot like restarting the computer, got latest patch. Even build a new test project with the same problem.
    Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded. So it will be a double compression and I dont want that. So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
   what do you think ????
   Peter

When I try to open itunes it says; This version of itunes has not been correctly localized for this language. Please use the English version. How do I fix this problem?

When I try to open itunes it says; This version of itunes has not been correctly localized for this language. Please use the English version. How do I fix this problem?

Hey KEBENNETT,
It sounds like you've restored Windows on your PC and iTunes is no longer opening and running normally.
I'd recommend using the instructions found at step 4 and 5 in this article to repair or remove/reinstall your iTunes installation:
Issues installing iTunes for Windows - Apple Support
All the best,
Jeremy

Looking for a way to solve permission problem in windows 7

one of the biggest problems i have with this windows that even that i'm an administrator and the owner of the computer i always have permission problems folders i get a no access errors with files and folders even thoughe i should have full permisions i belive system restore doesn't work for me because permissions problem and i don't know what to do anymore i'v used uac i'v disable uac i downloaded a registry file to take owernship on files and folders and still problems so what can i do to solve all this problems?
and to be honest i really don't like the way windows 7 behave with permisions this is my computer and i am an administrator why do i have to fight to access folders like System Volume Information,Recovery,Documents and Settings why do i get the lock icon when i take owenership and i'm on the users list but when i add users everyting is fine?
10x in advance.:)

Hello,
This is by design. You cannot access the folder or files are protected by operation system even if your current user account is Administrator.
System Volume Information is a hidden and protected system folder that the System Restore tools uses to store it information and restore points.
In Recovery folder, there are two files: Winre.wim and boot.sdi. With these two files, you are able to boot the system to Windows Recovery Environment (WinRE) and do a repair without inserting a Windows 7 installation disc.
If you want to access the protected folders like “System Volume Information”, use the following method, but I do not recommend you do this. It may cause some potential problems:
1. Right click the System Volume Information folder and choose Properties.
2. In Security tab, click Edit and then click Add. Type in “everyone”(without quote) and click Ok.
3. Then “Everyone“ will be listed under ” Group or user names”, click Everyone, and check “allow” full control option.
As BurrWalnut said, the “Documents and Settings”, it is a junction. A junction point is also a protected operating system folder that points to another folder. The junction point is an important part of application compatibility and does not contain any data or other files. In Windows Vista and Windows 7, the “Documents and Settings” folder has been replaced with “Users” folder. All of your user profiles are saved in C:\Users\User name folder.
Thomas Lin

Permission problem: Correct roles for ESS??

Similar Messages

Maybe you are looking for