Permission problem when create source system between BI and R/3

Hi All,
I want to create a source system between BI7 and R/3 system
Both RFC connections have been created and tested succefully on the 2 systems
But when i create the source system on BI I have the message :
"Changes to Repository or cross-client customizing are not permitted"
Any idea ?
Thanks in advance for answers
Sebastien

Hi All,
Thanks for your answer
The issue was solved when system is opened
Now my source system is created but I can't activate it !
When I try to activate I have 2 error messages in result :
RSAR 374 : The folowing errors occured in the source system
RSAR 375 : Result of the destination check: Timeout
There is no SAP help on these messages and for the moment I don't find thread about this on forum
Any idea ?

Similar Messages

Problem when creating Database with Database, OS and hardware Configuraiton

Problem when creating Database:
There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

user563502 wrote:
I am working on Solaris 8. What is Alert_SID.log? where can I find it?
ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
to be honest with you, this is not your work.

Error when creating source system

Hi,
Could someone help me to solve this issue :When I want to create a source system D99100 in BI , I get the following message:
the test and remore connection via sm59 in BI are OK.
Source system cannot use any of the proposed connection names
Message no. RSAR362
Diagnosis
Every connection to a source system is named using a unique two-digit identifier. Source system D99100 does not accept any of the proposed values.
The last proposed value was B9.
System Response
Source system has not been connected.
Procedure
If you want to recreate the source system from BI information, then you can only use a single value, namely B9, because the connection already has this name in BI.
Delete the existing connections in the source system or contact a BI consultant.

Hello,
By this time your issue might be resolved.
When you are trying to Connect or Reactivate source systems you might get this error. In the source system (R/3) check the table entries RSBASIDOC. Some reason after system copy, these entries should correct if you run BDLS and some time it mess up.
Go the table and go to the edit mode and change the entrie for that RFC destination. Change the filed TSPREFIX to some thing else and save it. Go back to BW and try to reconnect and you will be able to connect it.
Hope this helps in the future for this thread.
PREDDY.

Create Source System in APO and BW

Hi Gurus,
i want to create a Source System in APO it should be connected to BW.
is there any "HOW TO" documentation to do this?
thanks
Younes

Hi,
there are business content delivered datasources
0APO*, e.g 0APO_PPDS_ORDER_01
http://help.sap.com/saphelp_bw33/helpdata/en/56/22f93a000f7550e10000000a11402f/frameset.htm or generate datasource, check
Re: APO/BW: How to get back from APO to BW/ How the send data from BW to APO
http://help.sap.com/saphelp_scm50/helpdata/en/c9/199170f13711d4b2f20050da385632/frameset.htm http://help.sap.com/saphelp_scm50/helpdata/en/e0/9088392b385f6be10000000a11402f/frameset.htm 1. Generate an export DataSource for the planning area
2. Replicate the DataSource 3. In the Data Warehousing Workbench, you are still in the source system view. Right-click the source system and choose DataSources Overview in the context menu. 4. Assign an InfoSource to the DataSource 5. In the Data Warehousing Workbench, branch to the InfoSource view. 6. Right-click the InfoSource that you have just created and choose Change. We can genetrate data sources for Plan Book, which will be used to load data. Other Datasources use live cache for data. OSS notes DP-- 549184 SNP--428147

Error while creating SOURCE SYSTEM

Hi All,
I have a problem while creating Source System to a Solman syatem configured with BW content. I have configured few some source systems already in the same Solman System.The system shows the following error, previous to this i get the message a "generating connection to the source system"
Error in source system RXX_100
Message no. RSAR502
Diagnosis
With Remote Function Call to system RXX_100 error Screen output without connection to user. ccurred.
Procedure
Remove the cause of the error.
Kindly provide me suggestions and DOCS related to the same.
Suitable points will be awarded for replies.
Expecting your kind reply,
Vineeth

Hi ,
In SCC4 the source client should not set as production when creating the source system connection between two systems.Please check below SAP note
973555 - System must be open for creating/connecting source systems
Thanks,
Shanaka

Create Source System BW

Hi, I have problem try create source system (ERP) in the BW.
In the TX RSA1 > Modeling > Source System > SAP > Create connection succesfully but show new system in the Folder BI.
This new soruce system is displayed in the SAP folder but the folder is shown in BI.
Anyone have any suggestions?
Best Regards,
EDRS

Hello,
Looks like the SYSTEM shows right by displaying ECC under SAP rather than BI.
Refer to the note :- Note 1087980 - ECC Source systems appearing in BI folder
Thanks,
Arjun

Problem when creating CAF Entity Service finder Methods

Guys,
Can any one please suggest me appropriatly to the below problem.
I am using NWDS 7.06. I have no problem when creating CAF project, Application Service and Entity Service even.
But in the Entity Service:
1. Add a string or longtext attribute.
2. try to create a custom finder method in operations tab, during that operation i am not finding the attribute which i have created in step1.
That means i am not able to create the my own finder methods with parameters.
I was able to do that in some version long ago but i have forgotten that NWDS version.
summary of Problem Is: " Cannot create custom methods with custom parameters in Entity Service"
Can you please suggest me the right version or a solution to this problem on urgent basis please.
I promise you that i will give you full points to you who ever gives me the right solution.
Please mail your suggestions to [email protected]

Guys,
I have solved the problem successfully. Thanks for your attention.

WHEN I CREATE SOURCE SYSTEM IN BW

Hi,
When i create source system in BW it is automatically saying that it has
RFC Destination already exists in the source system. Do you want to transfer,check this
destination or cancel the source system?
it has three option copy,check,cancel
i have done check, copy..it says
RFC CONNECTION CHECK FAILED.CHECK CONNECTION.
Please help

Hi,
1. Check for parameters specified .e.g. password. user name , authorization for the user , ip address etc.
2. While creating source system 1st time in the BW , R/3 client should be open and its status should be changes allowed
.(SCC4-> Double click the client ->
Changes to transport & client specific setting
Changes without automatic Recording
Cross Client object changes
Changes to repo. client ind. object allowed
Hope that helps.
Regards
Mr Kapadia

Error creating source systems

Hi,
We have R/3 4.6C and BI7.0 in our landscape.
When i tried to create source system in BI to R.3 4.6C, its not able to create.
It giving error "RFC user logon failed". But all the RFC users password is correct and i have tested it.
I have created successfully with the same RFC user between BI and SRM.
Can anyone tell me what the problem could be and guide be in this regard.
Thanks and Regards,
Sailesh K

Problem solved.
R/3 4.6C was sending the password in upper case, despite entering it in lower case.
Solution: changed the ALEREMOTE password in BI to be uppercase.
"Message "Name or password is incorrect (repeat logon)" appears when trying to log on to an SAP system, even when the password is known to be correct. You are trying to log on to an ERP2005 or higher using a set of SAPGui controls that cannot handle case-sensitive passwords. The SAPGui controls are converting the password you type to upper-case, even when the password is lower-case.
Change the user password to upper-case (from the initial SAPGui screen or from transaction SU01)."
Thanks anyway.

Problem when creating a sales order with reference by BAPI

I am facing one problem when creating Sales Order.
The scenario is like this while creating SO With reference to an Order type, a new SO will be automatically created with a diff order Type.
I am using "BAPI_SALESORDER_CREATEFROMDAT2".
I am calling this BAPI in USEREXIT_REFRESH_DOCUMENT.
Am I using the right exit to call this Bapi ?
Problems are like :
1. Ref Sales Order creating without Sales Unit .
2. "Object Status does not exist" error msg is coming for Header and Item level(when clicking the status tab and then object status pushbutton). But if testing the bapi from SE37 in test sequence....no such problem persists.
As for example in case of sales unit,in the debugging mode i have seen that BAPI uses a perform to fill the values in the VBAP structure.But after that when it come back to the main program VBAP remains blank.This ocuurs when the BAPI is called from the exit whereas if tested from SE37, VBAP retains the value.
Can u suggest in this ? This is very very urgent............
Thx in Adv.........................

Thanks........
Your suggestion was a great help to me.I have used a custom FM and called it in starting new task.
Since i am a university fresher working in SAP for nearly 1 year.....can you please explain me the difference between in update task and starting new task.Why the problem was occuring for which you have suggested to call a custom function module.
what is V1 update and V2 update?Is it attached with asynchronous ans synchronous update.It would be a great help to me if you kindly clear my confusions....
thanks in advance.

Creating source system in BW3.5

Hi all,
I create a source system connection using automatic method and fill up all entry in create source system window in next screen i give user name and password then these errors are shows
Changes to Repository or cross-client Customizing are not permitted Choose 'Display object' or 'Cancel'.
when i am going in help of that error it shows this information In this logon client any changes to repository and to crossclient customizing objects are prohibited
can anybody tell me why these errors are occur.
thx.

Hi Ankit,
As you posted yourself this message is appearing because your system is locked for any kind of editing. You need to open it to create this source system. This is generally done by a BASIS consultant.
You can go to SCC4 as mentioned above by Pankaj and open the client to create this.
Regards,
Sumit

Error msg RSAR502,while creating source system?

Hello Gurus,
when i am creating source system i got error msg called RSAR502,can any one solve this issue..
Thanks in Advance

Hi,
Check the OSS note : 184586,493422.
Take the help of ur Basis support.
Hope it helps-
MM

Problem when creating Database (Database, OS and hardware Configuraiton included)

Problem when creating Database:
Below are the problems, which I faced during creation of database. I have mentioned both the problem separately. Plus the log file maintained by Oracle during installation. It might help in diagnosing the error. Plus a little conclusion with I turned up to.
There are two problems, when creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Log File Showing Error :
Result code for launching of configuration tool is 0
Launched configuration tool Oracle Database Configuration Assistant
Command which is being spawned is C:\Program Files\Oracle\jre\1.1.7\bin/jrew.exe -Duser.dir=d:\oracle\ora81\assistants\dbca\jlib -classpath ";C:\Program Files\Oracle\jre\1.1.7\lib\rt.jar;C:\Program Files\Oracle\jre\1.1.7\lib\i18n.jar;d:\oracle\ora81\jlib\ewt-3_3_6.jar;d:\oracle\ora81\jlib\share-1_0_8.jar;d:\oracle\ora81\jlib\swingall-1_1_1.jar;d:\oracle\ora81\assistants\dbca\jlib\dbassist.jar;d:\oracle\ora81\assistants\jlib\jnls.jar;d:\oracle\ora81\assistants\jlib\acc.jar;d:\oracle\ora81\jlib\help-3_1_8.jar;d:\oracle\ora81\jlib\ice-4_06_6.jar;d:\oracle\ora81\jlib\netcfg.jar;" DBCreateWizard -progress_only -responseFile NO_VALUE -createtype seed -numusers NO_VALUE -apptype NO_VALUE -cartridges NO_VALUE -options NO_VALUE -demos NO_VALUE -seedloc d:\oracle\ora81\starterdb -sid ora8i -orabase d:\oracle -clususer NO_VALUE -cluspswd Protected value, not to be logged -nodeinfo NO_VALUE -gdbName ora8i
Invalid Exit Code. The following result code will be used for configuration tool: 1
Configuration tool Oracle Database Configuration Assistant failed
The datafiles will be copied from the CD to d:\oracle\oradata\ora8i. The Oracle Database Configuration Assistant will begin creating the database.
An Oracle database will be created for you. The database name will be ora8i. The system identifier for the database will be ora8i. The password for the INTERNAL account will be ******, the SYS account will be change_on_install and the SYSTEM account will be manager.
Log File of Installation:
The above code is a part of the log file, which is generated by Oracle installer at C:\Program Files\Oracle\Inventory\Log\..
I just pasted the part of code, highlighted is the code showing error with Oracle Database Configuration Assistant.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

Dont't worry about that. Before you
create a table(or view), it is wise to
drop the table(or view) with the same name.
If the name doesn't exist, of course there
is an error message. See the following script:
-------------------begin-----------
drop table students cascade constraints;
create table students (
sid varchar2(5),
fname varchar2(20),
lname varchar2(20) not null,
minit char,
primary key (sid));
--------------end-----------------
Good day!
null

Create source system in bw

hi all,
         i am working on bw 7.0 its totally different from bw 3.5 in bw 7.0 i create
         info area , info object , and info cube when i am moving next step create source system ,info source , and assigning data source its totally different from bw 3.5 how can i create these three can any body send any document or any link or any pdf files realated to bw 7.0.
mail id : [email protected]
thanks.

Hi Ankit,
To Load Master data
Creation Of DataSource.
In the left panel select DataSource
Create application component (AC)
Right click AC and create DataSource
Specify data source name, source system, and data type (master data attributes / text / hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format (csv) and data separator( , )
In proposal tab click load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during creation of the transformation in InfoProviders.
Activate DataSource and click read preview data under preview tab to see DATA.
Create InfoPackage by right clicking DataSource and in schedule tab click start to load data to PSA.( make sure to close the flat file during loading )
4) Creation of data targets
In left panel select InfoProvider
Select created InfoArea and right click to select Insert Characteristics as info provider
Select required InfoObject
Under that InfoObject select subtype as attributes / Text / Hierarchies
Right click on attributes / Text / Hierarchies and select create transformation.
In source of transformation, select object type ( DataSource ) and specify its name and source system ( Note: Source system will be a temporary folder or package into which data is getting stored. )
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full /delta )
In update tab specify error handling ( request green/request green/ Deactivated/ No update No reporting )
Activate DTP and in execute tab click execute button to load data in data targets. Monitor the request
Go to InfoProvider and right click the InfoObject and select Maintain master data tab to see whether data has been uploaded or not.
To Load transaction Data
Creation of DataSource (PSA)
·     In the left panel select DataSource.
·     Create application component (AC).
·     Right click AC and create DataSource.
·     Specify DataSource name, source system, and data type (Transaction data).
·     In general tab give short, medium, and long description.
·     In extraction tab specify file path, header rows to be ignored, data format (csv) and data separator ( , ).
·     In proposal tab load example data and verify it.
·     In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in InfoProviders.
·     Activate data source and click read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click start to load data to PSA.( make sure to close the flat file during loading )
Creation of data targets
·     Right click on ODS or InfoCube and select create transformation.
In source of transformation, select object type (DataSource) and specify its name and source system (Note: Source system will be a temporary folder or package into which data is getting stored.)
Creation of data targets
·     Right click on ODS or InfoCube and select create transformation.
In source of transformation, select object type (DataSource) and specify its name and source system (Note: Source system will be a temporary folder or package into which data is getting stored.)
·     Activate created transformation.
·     Create Data Transfer Process (DTP) by right clicking the InfoCube.
·     Specify Source Of DTP (i.e. Object type: DataSource, DataSource: Name of DataSource, Source System: File.).
·     In extraction tab specify extraction mode (full).
·     In update tab specify error handling.
·     Activate DTP and in execute tab click execute button to load data in data targets.
Regards,
khyati.

Creating source system in RSA1

Hi guys,
Im trying to create a source system in the TC RSA1 between R/3 PRO y BW PRO. But at the end of the process it sent me the message Source system already exists. There is no other source system for R/3 created. What can it be?
Thanks a lot
Regards,
Vic

Hi Vic,
Goto sm59 and delete the logical system for the R/3 system and retry the steps again.
Check this doc:
http://help.sap.com/bp_biv135/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
The steps for creating source system (automatic option in RSA1)is as follows:
1.Create remote logons in both the systems.
2.RSA1 -> Source system -> Create source system -> automatic creation
3. Enter the details of the R/3 system and the Remote logon ids of both the system. In case you are using BI 3.5 or greater + R/3 4.7 or greater the password is "case sensitive" hence have all the passwords in CAPS.
4. Now the system would create a remote logon and show up the remote logon screen. In that screen -> "logon and security" -> enter the remote logon id and password and save. Now the remote logon should not work from there.
The connection is established.
Bye
Dinesh

Permission problem when create source system between BI and R/3

Similar Messages

Maybe you are looking for