Permission problems in Bridge

Hi,
I am using OSX 10.8.3, Adobe Bridge CS5 and Photoshop CS5.
I ran repair permissions from disk utility, and now the results are inconsistent.
in that if I use bridge to drag & drop a file from the desktop to a folder on the desktop it work ok.
but is I dark and image file from the HD to a folder on the hard disk I get an error message that I dont have permissions to do that. (image 1)
and if I dark an image file that is on the desk top to the hard disk, but not to a folder on the hard disk, I get a circle with a strike through (not allowed) (image 2. dam the screen capture as that cursor and that circle with astrike through did not capture, but I am trying to drag the image to the hard disk not a folder)
problems is, Photoshop is running so smooth now, I dont want to have to re install it all, as I have to spend time getting the filters right (as there is some incompatibilities between extensis extensions and NIK filters and Onone filters...
regars, Sandy

Hi,
I seem to have fixed it.
I selected the hard disk icon, went down to the 'Reda&write" permissions, and set all to read & write, and the passed those permission onto all the enclosed items..
(lat time I did this in 10.6.4, the system stoped working and I had to re isntall everything...)
regards
Sandy

Similar Messages

Problem with Bridge CS4 reading/editing XMP metadata added in Bridge CS6

Please excuse me if this is a dumb/obvious question. I did try searching the forums for similar problems and didn't find anything that seemed to speak to my issue.
I'm having a problem where Bridge CS4 won't read/edit xmp metadata (specifically, keywords and descriptions in the IPTC panel) that I have entered using CS6. it will read some files, not others. The files are all .mp4s. Of these files, I can read/edit IPTC panel metadata for some of them in Bridge CS4; I can add metadata for all of them in CS6. I see no particular pattern in these files to explain what is and isn't read/editable in CS4.
My question is whether this is a compatibility issue between different versions of CS (in this instance, CS4 and CS6). i know it's a tired refrain to blame software when it could easily be user error, in which case I'd be frankly delighted to know what i'm doing wrong. Please bear with me as I give a few more details.
I'm using macs. I've tried this on multiple systems - for instance, on a mac pro 3 which for some reason has both CS4 and CS6 installed, i can add and edit keywords using CS6, but not when using CS4. Again, in CS4, some .mp4 files read/edit, others do not.
Bridge CS4 blames the files and tells me that the selected file cannot store xmp metadata, and that the properties cannot be modified. To be specific, in the metadata panel it says "this property cannot be modified"; in the keyword panel, it says, "This file (zzz.mp4) cannot store xmp metadata. No changes will occur." This seems odd, because I'm able to add xmp metadata for the same files in CS6 on the same computer, and other computers. I know this problem would disappear if all our computers were using CS6 (or CC), but unfortunately that's not a possibility at the moment. Some of them only have CS4.
Computer details (not an exhaustive list, but two instances): mac pro 3.1 running snow leopard, 16GB memory; macbook pro 4.1 running snow leopard, 4GB memory; adobe bridge cs6 (5.0.0.399) and cs4 (3.0.0.464).
Things I have tried:
Permissions - the files are set to read/write for everyone. Given that I can add/edit metadata in CS6, it doesn't seem to be a permission issue.
Purging the cache - other users seem to have had problems adding metadata in Bridge CS4 where purging the cache for affected files solved the problem. Didn't work in this instance.
Upgrading all affected computers to CS6/CC is beyond my control. I need to figure out why CS4 won't let me read/add/edit xmp metadata, if only for the sake of understanding the broader implications for interoperability.
Any helpful suggestions would be much appreciated.
Thanks,
Kevin

adobe bridge cs6 (5.0.0.399) and cs4 (3.0.0.464).
Without having experience with mp4 files and metadata my observation is that you certainly have not updated Bridge CS6 ( should be 5.0.2.4) and I believe also not the latest version of CS4, can't imaging this also stayed at .0.0 so first try to update both.
And if CS4 can read the data of some files it should be capable of reading them all. Be sure to have the files completely cached first, can take a while.
Other things to try in CS4 is refresh preferences (hold down option key while restarting Bridge and choose reset prefs).
And also check for hidden cache files using menu view/show hidden files. Sometimes those cache files can be troublesome between versions.
If purge cache did not work and reset prefs also failed consider to also delete Bridge plist file and Bridge cache file manual (from user library)

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no ma

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no matter what work I have done, inc cropping they all go back to ,as they came out of camera. What on earth is happening? I am on PS CS6. I might point out everything was working normally up to yesterday, when this first started.
I recently changed computer to 64bit from 32bit, not sure if this causing the problem or not. Any help would be appreciated.

Robert,
Would you be so kind to rephrase your question with concise, precise information and without any "let's say that" hypotheticals? Sorry, I can't quite follow you.
Also please give exact versions of Photoshop CS6 (13.what.what), of Bridge and of your OS.
Thanks.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Back End Permission Problem

Hi everyone,
We encounter permission problems with our Visual Composer Applications.
We have created three applications using the visual composer and accessing a BI-system as backend
But the developer has super_user permissions and we dont want our endusers to have them.
Therefor we created new roles only with the permission to see that specific report.
But now, the users are not allwoed to see the data.
The error says, that I should ckeck the permissions.
Well, I did. The user can execute the queries I used directly with BEx - no problem, but within the VC-application not.
So I assume the problem are permissions in the portal.
If I give the user super_user permissions it works, but thats not what I want.
I want the user having minimal permissions in the portal.
Is there somebody who can help me?
Sincerely
Mark

Hi
Your problem looks like portal authorization issue. There is separate role for 'End Users' to execute & view the portal iview. Just check with your EP administrator, he will solve the problem. There will be role like -
*VC_Role.
*eu_Role.
Regards
Sandeep

Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now som

Hi I have been having a problem with Bridge in CS4 recently. So uninstalled CS4 and Lightroom 4.4 and reinstalled them on my Desktop PC. When I turned on Bridge through CS4, My thumb nail images disappeared and a thumb nail icon with CR2 appeared. Now some of my images have disappeared from Light room 4.4, but I can find them in CS4 and Bridge now shows some thumb nails as images and some as an icon with CR2. I have spent two weeks going through preferences etc. to find how to resolve my problem. Please can you Help? Meany thanks in advance
Derek Randall

I don't use LR and rarely use the bridge so I can not answers about thumbnails in them, However thumbnails in windows file explorer and windows dialog for CS2 files will only show if you have installed codec into windows that will produce them. Windows does not do CR2 thumbnails on its own. I use FastPictureViewer Codec package for RAW File and PSD files thunbmail support.

[MX 2004} Can't upload! The file may not exist, or there could be a permission problem

I'm running MX 2004 on Windows XP. All's been well for the
last few months, doing site maintenance at this part-time job. I
get tangled up a bit in checking files in and out, coming from
GoLive, and since there's no one else with FTP access, yesterday I
told it to check the entire site in. I didn't have any changes I
didn't want to commit, and I figured that would keep things a
little neater.
As of today, I can post revisions to existing pages, or
resize image files, but when I create a new page, or try to place a
new image file on an existing page, I can't upload it.
So, to be clear: I have two pages already up on the site,
index.html and apple.html, with a link between them. If I create
new page banana.html and make a link to it from index, index.html
will upload that revised link, but banana.html is refused with the
message
FTP error: The file may not exist, or there could be a
permission problem
I know the file doesn't exist (remotely); I just made it.
I've gone to Prefs and disable Check In / Check Out, which didn't
do me any good. What next?

Can you open the FTP log, select one of these new files and
upload it- then
cut and paste relevant part of the ftp log?
Also- does this site have a "host directory", a subfolder
that your public
files need to go into? If yes- is this folder listed in the
host directory
line of the remote server info?
And odd past thing i've seen-
Had hosting that used public_html as the public folder name.
They also had a symbolic link named www that pointed to
public_html
Could upload/download existing files with www in "host
directory" line of
dw; but could not upload new files or work with files in
subfolders.
changing to public_html instead of the www symlink fixed this
for me.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Permission problems after upgrade to 10.5 on early Power PC G5 Tower

Permissions problems after upgrading to 10.5 on a client power PC (early) G5 tower.
Problems include folders that are created on XServe via this client do not allow any one else including this client to access. All other clients running 10.5, which happen to be newer Intel machines do not have this problem. Repairing permissions, updating to 10.5.1, try to manually correct permissions have all failed to repair the situation. All clients log onto the XServe with the same user/password. This client has since been downgraded back to 10.4.9 and has no issues.
The Xserve runs 10.3.9, any help would be greatly appreciated.
We have read through the forums regarding permission problems after upgrading and even tried some tips found here.

You really should check things out first before speaking.
Here are the requirements for 10.5;
Mac OS X v10.5 Leopard requires:
A Mac computer with an Intel, PowerPC G5, or Power PC G4 (867 MHz or faster) processor
512 MB memory or more
A DVD drive for installation
9 GB of available disk space or more
Some features require a compatible Internet service provider, fees may apply.
Some features require Apple's MobileMe service; fees apply.
Allan

Problem with Bridge CC Update

I always get an error message (49).See picture below. But at the same time a had no problems with the update for Photoshop CC 2014. so whats the problem with Bridge CC?

Hi Robert,
Please refer to the link below:
Getting Download Error 49 Bridge Cc
Regards,
Sheena

Looking for a way to solve permission problem in windows 7

one of the biggest problems i have with this windows that even that i'm an administrator and the owner of the computer i always have permission problems folders i get a no access errors with files and folders even thoughe i should have full permisions i belive system restore doesn't work for me because permissions problem and i don't know what to do anymore i'v used uac i'v disable uac i downloaded a registry file to take owernship on files and folders and still problems so what can i do to solve all this problems?
and to be honest i really don't like the way windows 7 behave with permisions this is my computer and i am an administrator why do i have to fight to access folders like System Volume Information,Recovery,Documents and Settings why do i get the lock icon when i take owenership and i'm on the users list but when i add users everyting is fine?
10x in advance.:)

Hello,
This is by design. You cannot access the folder or files are protected by operation system even if your current user account is Administrator.
System Volume Information is a hidden and protected system folder that the System Restore tools uses to store it information and restore points.
In Recovery folder, there are two files: Winre.wim and boot.sdi. With these two files, you are able to boot the system to Windows Recovery Environment (WinRE) and do a repair without inserting a Windows 7 installation disc.
If you want to access the protected folders like “System Volume Information”, use the following method, but I do not recommend you do this. It may cause some potential problems:
1. Right click the System Volume Information folder and choose Properties.
2. In Security tab, click Edit and then click Add. Type in “everyone”(without quote) and click Ok.
3. Then “Everyone“ will be listed under ” Group or user names”, click Everyone, and check “allow” full control option.
As BurrWalnut said, the “Documents and Settings”, it is a junction. A junction point is also a protected operating system folder that points to another folder. The junction point is an important part of application compatibility and does not contain any data or other files. In Windows Vista and Windows 7, the “Documents and Settings” folder has been replaced with “Users” folder. All of your user profiles are saved in C:\Users\User name folder.
Thomas Lin

"How to Resolve ORA-29532 Java 2 Permission Problems in RDBMS 8.1.6 and 8.1.7"

I'm in the process of publishing the following note (134280.1), titled "How to Resolve ORA-29532 Java 2
Permission Problems in RDBMS 8.1.6 and 8.1.7".
It will be accessible from Oracle Support's "Metalink" site.
"How to Resolve ORA-29532 Java 2 Permission Problems in RDBMS 8.1.6 and 8.1.7".
Problem Description
Periodically an application running in the Enterprise Java Engine
(EJE) formerly known as the "Oracle 8i JVM", "the JSERVER component", or
the "Aurora JVM" will fail with a "java 2" permissions error having the
following format :
Note : Message shown below have been reformatted for easier readability.
java.sql.SQLException: ORA-29532: Java call terminated by uncaught Java exception:
usually followed by a detailed error message similar to one of the following
messages :
Example # 1
java.security.AccessControlException: the Permission
(java.net.SocketPermission hostname resolve)
has not been granted by dbms_java.grant_permission to
SchemaProtectionDomain(SCOTT|PolicyTableProxy(SCOTT))
Example # 2
java.security.AccessControlException: the Permission
(java.util.PropertyPermission * read,write)
has not been granted by dbms_java.grant_permission to
SchemaProtectionDomain(SCOTT|PolicyTableProxy(SCOTT))
Example # 3
java.security.AccessControlException: the Permission
(java.io.FilePermission \matt1.gif read)
has not been granted by dbms_java.grant_permission to
SchemaProtectionDomain(SCOTT|PolicyTableProxy(SCOTT))
Explanation
The java 2 permission stated in line # 2 of each of the above "Examples"
has not been granted to the user specified in line 4 of the above "Examples".
Solution Description
The methodology to solve this issue is identical for all java 2 permissions
cases.
1) Format a call "dbms_java.grant_permission" procedure as described below.
2) Logon as SYS or SYSTEM
3) Issue the TWO commands shown below
4) Logoff as SYS or SYSTEM
5) Retry your application
For Example # 1
1) Logon as SYS or SYSTEM
2) Issue the following commands :
a) call dbms_java.grant_permission('SCOTT',
'java.net.SocketPermission',
'hostname',
'resolve');
b) commit;
Note: Commit is mandatory !!
3) Logoff as SYS or SYSTEM
4) Retry your application
For Example # 2
1) Logon as SYS or SYSTEM
2) Issue the following commands :
a) call dbms_java.grant_permission('SCOTT',
'java.util.PropertyPermission',
'read,write');
b) commit;
Note: Commit is mandatory !!
3) Logoff as SYS or SYSTEM
4) Retry your application
For Example # 3
1) Logon as SYS or SYSTEM
2) Issue the following commands :
a) call dbms_java.grant_permission('SCOTT',
'java.io.FilePermission',
'\matt1.gif',
'read');
b) commit;
Note: Commit is mandatory !!
3) Logoff as SYS or SYSTEM
4) Retry your application
References
For more details on java 2 permissions and security within the EJE, review
Chapter 5, in the Java Developer's Guide. entitled,
"Security For Oracle8i Java Applications"
The RDBMS 8.1.7 version can be found at :
http://otn.oracle.com/docs/products/oracle8i/doc_library/817_doc/java.817/index.htm

Hi, Don,
I solved the problem of security exception I mentioned at java procedure topic as following:
ORA-29532: Java call terminated by uncaught Java exception: java.lang.SecurityException
I tried to use your solution as following:
call dbms_java.grant_permission('SDE', 'java.net.SocketPermission', 'ORCL.COHPA.UCF.EDU','resolve');
but SQL*plus gave me a error message:
invalid collumn.
What's the problem?
However, I call a grant command as following:
SQL> grant JAVASYSPRIV to sde;
and then that exception is gone. What's the difference between dbms_java.grant_permission and grant command?
Thanks
Bing
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by don -- oracle support:
I'm in the process of publishing the following note (134280.1), titled "How to Resolve ORA-29532 Java 2
Permission Problems in RDBMS 8.1.6 and 8.1.7".
It will be accessible from Oracle Support's "Metalink" site.
"How to Resolve ORA-29532 Java 2 Permission Problems in RDBMS 8.1.6 and 8.1.7".
Problem Description
<HR></BLOCKQUOTE>
null

Facing permission problem for accessing database

{color:#0000ff}Hello All,
I have just started in this forum. I am very new to j2me and facing problem and I need your help.
I had successfully signed the application and it was working properly on device. Next I added login module in my application where I am accessing a PHP from server which is having MySQL DB connection for usercheck. When I try with unsigned jar it works properly and when I try using signed jar it is showing me wrong username/password. I think it is midlet permission problem.
It would be very nice if someone can tell me what might be the possibilities that it is going wrong.
Thank you.
Regards,
-Anuradha{color}.

Signing MIDlet has nothing to do with how data is send over the network. So please be sure that your signed MIDlet is not corrupting your data.
If you are receiving correct username / password at server side, then its server's responsibility to validate it Your MIDlet has posted the parameters right way.
I would suggest you to check following things
1) Check if server is validating the username / password.
2) What response does server sends you back after validating username / password. Check on both ends.
3) Check how your midlet processing the response from the server.
4) Do you get any exceptions?
but I am doing database connection through php which is on server, I hope it is not wrong way of doing it.Doesn't matter what technology is used at server side to connect to the database.

Urgent! Problems with bridge JDBC-ODBC

Hello,
I have found out that JDBC-ODBC bridge in JDK 1.4.1 don't works fine, because, if you want to store text largest 254 characters in a field type text in one record of a Access database's table, it generate a SQLError, I have tried with EasySoft JDBC_ODBC and it works, with it I could store text fields largest than 254 characters, but I have new problems, EasySoft bridge is not free, and don't let store nulls in fields type Date [with PreparedStatement x, x.setDate(theDate)] (raise a SQLError), in the other hand, JDKs bridge do it. Somebody knows if exists JDCB-ODBC free drivers more suitables than JDK's includes, or if exists upgrades?
Is very urgent!, Thanks a lot
(Sorry, my english is very poor)

I have tried it, Is there where I found the EasySoft's JDBC-ODBC driver, but the result is: one problems out, yes, now with this driver I can store String largest 254 characters in fields type MEMO of a table in Access Database, but two new problems, 1st. is a trial version, (requiere paid), and 2nd. don't let store nulls in fields type Date when JDKs JDBC-ODBC bridge lets, and the aplication needs leave this fields blanks.
Any other idea?
Thank

How do i fix this: error message- index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the ser

that is...
index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured.
File activity incomplete. 1 file(s) or folder(s) were not completed.
Files with errors: 1
index.html
thanks!

It's under More Options triangle in the Manage Sites panel. See screenshot:
Nancy O.

New pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

new pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

Sounds like you somehow got the mac version.
Download the windows 6.7 camera raw update from this link:
Adobe - Photoshop : For Windows : Camera Raw 6.7 Update

Permission problems in Bridge

Similar Messages

Maybe you are looking for