Permission to use SAP Real-Time Collaboration capabilities
Hi Experts,
I get the following error message when i login to portal EP 7.0 (in one small window) i am able to use my portal.
You do not have permission to use SAP Real-Time Collaboration capabilities. For more information, contact your portal administrator
can any one help me what permission i need to set for Real time Collaboration RTC. i have enable to all service in ivew properties "yes" to use RTC services
Thanksyou
Regards
Vijai
refer
https://www.sdn.sap.com/irj/scn/thread?threadID=740397
Similar Messages
-
Real time collaboration issue after Kerberos authentication setup
Hi,
We are using SPNego (kerberos) authentication for our portal (EP 7.0 SP10). When user clicks on log off link, he comes back to the portal home page again so there is no way for the user to log off from the portal. I don't see this as a problem for the users who are not having access to collaboration. But for the users having access to collaboration, when they login to the portal second time (before expiry of the first login session which they couldn't close as log off is not working), they get warning stating
"You are logged to the same portal already. Real-time collaboration capabilities will not be available in the current portal session until you terminate the other session and then restart this one by refreshing the browser or logging on again."
How to resolve this?
Helpful answers will be rewarded
Regards,
ChandraMost people set the logoff link to a URL which contains soem javascript which closes the browser.
Paul -
Configuration of Real time collaboration(IM)
Hi,
I would like to configure my portal for Instant messaging between portal user. I mean if users are online then they can chat (Some what like Yahoo). I need help from scratch. How to go with it and what i need to configure for this.
Its Urgent!!!.
Thanks & Regards
ParthWorking Collaboratively Across Teams Scenario Installation Guide
1 Purpose
The purpose of this scenario is to provide an example of how SAP Enterprise Portal can enable your teams to work collaboratively within the same functional team, or across functional teams with the use of the Collaboration Launch Pad (CLP).
Following you will find the information on how you can install this scenario. The Scenario Installation Guide provides you with the information you need to set up your business scenario configuration.
Note that the installation documentation for SAP Best Practices business scenarios is structured on two levels:
Scenario Installation Guide: one document for a business scenario
Building Block Configuration Guide: one document for a building block, but several documents for a scenario installation
The Scenario Installation Guide is the backbone of the installation documentation and describes which building blocks you need to install for this scenario and prescribes the order you have to follow when you install them.
For the installation of each building block, you have to refer to the corresponding Building Block Configuration Guide where you can find detailed configuration procedures of this building block.
Always use the Scenario Installation Guide (this document) as the starting point for all your installation activities.
For a successful installation of the entire scenario, it is important:
that you follow the structure in the Scenario Installation Guide from the first to the last installation activity
that you carry out all installation activities of a building block before you start with the next building block.
2 Prerequisites
You have a live SAP R/3 backend system.
SAP GUI installed on your machine to use Win GUI iView.
You have read the essential document, Building Block N00: Essential Information.
You have the End User role (eu_role) assigned to your user.
Collaboration Launch Pad: Activate Link:
The Collaboration Launch Pad (CLP) allows portal users to manage their contacts and launch services for collaboration. Users click a link in the tool area of the portal header to launch the CLP.
If you want to display the link to launch the CLP in the portal header after installing the Collaboration component, you must activate it manually in the attributes for the tool area of the default framework page.
Procedure
1. Open the portal in a browser and go to:
SAP Netweaver Portal Content Administration ® Portal Content ® Portal Users ® Standard Portal Users ® Default Framework Page
2. Double-click Default Framework Page.
3. Select the Tool Area iView checkbox.
4. Choose Open. The Property Editor page displays.
5. Choose Show All in the Property Category drop list menu.
6. Choose Enable Collaboration Lauch Pad properties.
7. Select Yes radio button.
8. Choose Save
9. Choose Close.
10. Choose F5 to refresh your portal screen.
3.3 Collaboration Launch Pad: Making Services Available
SAP delivers a default configuration for making services available in the following menus:
Collaboration menu of the Collaboration Launch Pad (CLP) and the room member list
Context menu for the displayed user names
Procedure
11. For the preconfigured groups of services (command groups) to be available for users, you must assign them to the respective purpose (type) provided.
12. Do the following steps and choose:
SAP Netweaver Portal Content Administration ® Collaboration Content ® Collaboration Launch Pad Administration ® Command Group.
13. Copy the existing command groups to your own namespace.
14. Use the Duplicate function and save each command group with a different name. In this way, you prevent the command groups used from being overwritten during the next system upgrade.
15. Make a note of the names( for example, clpGroup_2 and userGroup_2) that you have assigned for the command groups clpGroup and userGroup.
16. Choose Type in the Left hand navigation Topics Area: Topics.
17. Choose the clpType checkbox.
18. Choose the Edit button.
19. Choose the Command Group (for exampe, clpGroup_2) you saved for clpGroup in the contextmenu_commandgroup drop list menu.
20. Choose OK.
21. Choose the userType checkbox.
22. Choose the Edit button.
23. Choose the Command Group(for example, userGroup_2) you saved for userGroup in the contextmenu_commandgroup drop list menu.
24. Choose OK.
3.4 Activating the RTC Session Manager
In order to be able to use the Real-Time Collaboration functions (sending instant messages or sharing applications), you must activate the RTC Session Manager after installing Collaboration.
Procedure
To activate the RTC Session Manager, perform the following steps:
25. Go to the default framework page.
Enterprise Portal Portal Content ® Portal Users ® Standard Portal Users ® Default Framework Page.
26. Double-click Default Framework Page.
27. Select the Tool Area iView checkbox and choose Open.
28. Choose Show All in the Property Editor drop list menu.
29. Expand the Enable Real-Time Collaboration properties.
30. Select Yes radio button.
31. Choose Save.
32. Choose Close.
33. Choose F5 to refresh your portal screen.
3.5 Activated Service Types
Two synchronous collaboration service providers are included with the initial installation of the Collaboration for SAP Enterprise Portal. The initially installed synchronous collaboration service providers are:
Real Time Collaboration (SAP RTC), which provides application sharing.
WebEx, which provides the WebEx meeting center service.
Upon installation of Collaboration for SAP Enterprise Portal, synchronous collaboration services are not activated. You must activate synchronous collaboration service types before they can be used.
Procedure
34. Review the list of activated service types.
Go to System Administration  System Configuration  Knowledge Management  Collaboration  Synchronous Collaboration Services  Activated Service Types
35. Choose New button.
36. Check the RTC_ApplicationSharing checkbox
37. Check the WebEx_WebExMeetingCenter checkbox.
38. Choose OK button. -
Error in Real Time Collaboration
Hi
We got an issue in our project.
When ever any user log's into Portal it is giving a message called
With title Real-Time Collaboration(You are logged to the same portal already. Real-time collaboration capabilities will not be available in the current portal session until you terminate the other session and then restart this one by refreshing the browser or logging on again.)
We are using EP6 SP13
And we are having 2000 Portal users every one is getting this error in portal.
And After restarting the Server we are not getting that error. And again after a month it again starts.
Thanking you in advance for help
From
SrikanthHi Srikanth,
We also faced the same error and it was because the same users have already logged into the portal once or more than once.
The capabilities of real time collaboration feature might not work if an user has made multiple login to the portal using same id.
Hope the issue should be same with you.
With regards
Deepa
Plz reward points for helpful answers. -
Is it possible to download the Real Time Collaboration ActiveX control?
We would like to deploy the Real Time Collaboration ActiveX control to our user's PCs using SMS. Our users do not have Admin rights on their PC, so the ActiveX control will not install automatically. I check on the SAP site for the download, but could not find it. Is the ActiveX control available for download somewhere?
ThanksHi,
Read this link:
http://help.sap.com/saphelp_nw70/helpdata/EN/24/ae5e77711b431c887aa5193af8d851/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/EN/45/cc3541afe5db2be10000000a1550b0/content.htm
You can also verify the download as follows:
1. In the Web browser of the user, from the Tools menu, select Internet Options.
2. In the General tab, click the Settings button.
3. In the Settings window, click the View Objects button.
4. In the Download Program Files window, if any of the following appear in the Program Files list, then the ActiveX control was downloaded:
ExpBaseNegotiator
ExpApplSelect
ExpApplShareX
Patricio. -
What are the important concepts in ABAP which are used in real time
Hi,
This suresh i'm learning sap/abap just i want to know the
important concepts sap/abap which will be used in real time.Hi,
Refer.
/people/thomas.jung/blog/2007/12/19/update-your-abap-development-skills-to-sap-netweaver-70
/people/horst.keller/blog/2007/03/21/1000-pages-full-of-abap
/people/anubhav.mishra/blog/2007/11/20/first-experience-with-abap
Also
Re: Any Bw abap course for writing routines?
Re: ABAP for BW
Re: Seeking advice ABAP With BW
Re: ABAP in BW
Hope this helps.
Thanks,
JituK -
What is ods concept in BW ?how it is used in real time?
what is ods concept in BW ?how it is used in real time?
Hi,
Please go through the following links:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/eb8f1895-0501-0010-73ad-e0bef4a2000a
http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
you can find more links in SDN.
Regards,
Chandan -
Real-Time Collaboration Instant Messaging & .wmv video ?
Hi, is posible using the last version Netweaver 2004s and Netweaver 2004s BI for some <b>Real-Time Collaboration Instant Messaging</b> for speak to users depending the costcenter and territory area ?
So idea is show too video .wmv for Principal Directors speaking to cost center depending the territory area and departaments. ?
Some idea ?
Thank you ...We try test Collaboration and Content the Collaboration.
-
Configuring SSL for Real-Time Collaboration
Hi,
We installed OCS10gR1 because we want to use Real-Time collaboration for delivering support. At this moment we are trying to configure SSL. We already worked through the following guides :
- Real-time collaboration admin guide
- OCS admin guide
- OCS Security guide
- OPMN admin guide
but it's still very fuzzy. It's hard to get a clear overview about the steps to follow to get SSL working for RTC. Is there some kind of "cookbook" or simple guide which describes all the steps in a clear way.
Thank youHi,
I ran the SSLconfigTool.sh script on the Infrastructure with success but the midtierSSLConfigTool.sh script didn't come to an end. Probably, I ran the script with the wrong options. I used the following options :
<oid hostname> gary.woerden.centric (hostname on which ocs resides)
<oid port> 389 (default)
<oid admin dn> I filled in orcladmin, but maybe dn=woerden,dn=centric would be better ???
<http server SSL port> 8250 (from portlist.ini)
<https> internet_appserver_registry (I really didn't know what value this must be)
<hostname of the computer> gary.woerden.centric
<True | False> False
The output of the script midtierSSLConfigTool.sh with the options mentioned above:
Modifying Collaboration Suite service registry
Exception in thread "main" javax.naming.AuthenticationException: [LDAP: error code 49 - Invalid Credentials]
at oracle.ldap.util.jndi.ConnectionUtil.returnInitialLdapContext(ConnectionUtil.java:492)
at oracle.ldap.util.jndi.ConnectionUtil.getDefaultDirCtx(ConnectionUtil.java:135)
at oracle.ldap.util.jndi.ConnectionUtil.getDefaultDirCtx(ConnectionUtil.java:157)
at URLUpdate.main(URLUpdate.java:32)
Done. Please go to /opt/oracle/product/10.1.1/ocs/apps/imeeting/logs/rtcctl directory to check the log file.
Starting the SSL Configuration Tool...
Log file recording the current execution is '/home/oracle/SSLConfigTool_20051104_091126.log'.
Below is the command line you have entered:
SSLConfigTool -config_w_default -opwd ******** -ptl_dad portal -ptl_inv_pwd ********
Executing command:
/opt/oracle/product/10.1.1/ocs/apps/bin/ldapbind -h gary.woerden.centric -p 636 -U 1
Querying password for Portal from OID.
Executing command:
/opt/oracle/product/10.1.1/ocs/apps/bin/ldapsearch -h gary.woerden.centric -p 636 -D cn=orcladmin -w ******** -U 1 -b "OrclResourceName=Portal,orclReferenceName=ocs.woerden.centric,cn=IAS Infrastructure Databases,cn=IAS,cn=Products,cn=OracleContext" -s sub "objectclass=*" orclpasswordattribute
Exit code: 0
Executing command:
/opt/oracle/product/10.1.1/ocs/apps/dcm/bin/dcmctl updateConfig
Executing command:
/opt/oracle/product/10.1.1/ocs/apps/opmn/bin/opmnctl stopproc ias-component=dcm-daemon
Configuring HTTPS for your ORACLE_HOME at:
/opt/oracle/product/10.1.1/ocs/apps
Backing up file '/opt/oracle/product/10.1.1/ocs/apps/opmn/conf/opmn.xml' to file '/opt/oracle/product/10.1.1/ocs/apps/opmn/conf/opmn.xml.orig_SSLConfigTool'.
Backing up file '/opt/oracle/product/10.1.1/ocs/apps/Apache/Apache/conf/ssl.conf' to file '/opt/oracle/product/10.1.1/ocs/apps/Apache/Apache/conf/ssl.conf.orig_SSLConfigTool'.
Backing up file '/opt/oracle/product/10.1.1/ocs/apps/webcache/webcache.xml' to file '/opt/oracle/product/10.1.1/ocs/apps/webcache/webcache.xml.orig_SSLConfigTool'.
Backing up file '/opt/oracle/product/10.1.1/ocs/apps/webcache/webcache.xml' to file '/opt/oracle/product/10.1.1/ocs/apps/webcache/webcache.xml.tmp'.
Executing command:
/opt/oracle/product/10.1.1/ocs/apps/sso/bin/ssoreg.sh -oracle_home_path /opt/oracle/product/10.1.1/ocs/apps -site_name SSLConfigTool_ssl_ocsapps.gary.woerden.centric -config_mod_osso TRUE -mod_osso_url https://gary.woerden.centric:8250 -u root
Backing up file '/opt/oracle/product/10.1.1/ocs/apps/j2ee/OC4J_Portal/applications/portal/portal/WEB-INF/web.xml' to file '/opt/oracle/product/10.1.1/ocs/apps/j2ee/OC4J_Portal/applications/portal/portal/WEB-INF/web.xml.orig_SSLConfigTool'.
Backing up file '/opt/oracle/product/10.1.1/ocs/apps/portal/conf/iasconfig.xml' to file '/opt/oracle/product/10.1.1/ocs/apps/portal/conf/iasconfig.xml.orig_SSLConfigTool'.
Executing command:
/opt/oracle/product/10.1.1/ocs/apps/portal/conf/ptlconfig -encrypt
Executing command:
/opt/oracle/product/10.1.1/ocs/apps/portal/conf/ptlconfig -dad portal -pw ********
Backing up file '/opt/oracle/product/10.1.1/ocs/apps/sysman/emd/targets.xml' to file '/opt/oracle/product/10.1.1/ocs/apps/sysman/emd/targets.xml.orig_SSLConfigTool'.
Executing command:
/opt/oracle/product/10.1.1/ocs/apps/dcm/bin/dcmctl updateConfig
This last command didn't come to an end.
Can you tell me what options are wrong and can I run the script again or should I first backup the backupped files ?
Thanx in advance! -
How to change the default Real-Time Collaboration page?
Who can tell me how to change the default Real-Time Collaboration page?
If I want to add my corporation logo in the top of the default page.How to do?
Thanks!Thanks for your help.
"Click the Sites tab to display all sites and their IDs for your system." But I clicked the sites tab ,it showed "http://hostname:7777/imtapp/app/home.uix". I could not find the siteID parameter from it. Why?
How to get it from command? -
Do I have to use LabVIEW Real Time with a reflective memory node?
For reference with an external data system that will be temporarily installed at a customer's site, they have asked that I tie into their data network to record data from their control system. They apparently use a reflective memory network for data sharing. I have no prior experience with reflective memory, but all references to it involve real time systems. I do not need absolute determinism to acquire this data, I can be late by several milliseconds with no problem. Do I still need to use LabVIEW Real Time to interface with the PXI reflective memory node?
Hi AEI,
I have worked with that card briefly before. It has a Visa based driver and RT isn't required. However, I haven't worked with the card on a non-rt system and am not sure if there any issues to be aware of.
A lot of work has gone into integrating support for the card into Veristand, it may save you enough development time to use at an RT-Veristand system to be worth the extra cost.
Jesse Dennis
Design Engineer
Erdos Miller -
Can I use Labview real time with PCI 6013?
How much does Labview real time cost?
Do i need to have some additional hardware to use labview real time with PCI 6013?You can not use the PCI-6013 board with LabVIEW Real-Time.
We offer three platforms for LabVIEW Real-time. PXI embedded controllers, 7030 data-acquisition plug-in boards (7030/xxxx) and FieldPoint. For more information on these options go to www.ni.com/products and then choose Real-Time from the menu on the left. There are PCI versions of the 7030 boards. Each 7030 board has a data-acquistion board attached to it (6030E, 6040E or 6533). When you embed a LabVIEW Real-Time program on the 7030 you will be able to access the daughter board. You can not access other boards from the embedded program. If you want to use several daq cards in your real-time system I would recommend a PXI chassi and PXI daq boards. -
How to verify RTSJ use linux real time kernel?
Hi,
I'm complete newbie into this area and I'm trying out the RTSJ 2.1 beta Linux. I'm using this on Ubuntu with the linux real time kernel. Is there anyway to find out whether the real time kernel is being actually used or in other words is there a way to find out whether RTSJ works fine with the real time kernel on Ubuntu? I see that the programs get compiled and run irrespective of whether I use the real time kernel or the generic kernel.
Thanks,
ViduraHi,
I would assume, like other distributions, that you either boot the real-time kernel or you don't. uname should show you what you are running, but you'd have to ask the Ubuntu folk what you should see for the RT kernel.
To see if you are benefiting from real-time, you need to run a RTSJ app that tracks deadline misses or measures latency/jitter. Try it on the non-real-time kernel and the real-time one and see what you get. Some of the examples in the "Getting Started" guide should be usable for these purposes.
David Holmes -
WebCenter Real-Time Collaboration
Hi everyone,
I am interesting on this subject. Is any documentation regarding installation, configuration of "WebCenter Real-Time Collaboration" and integration with Oracle webcenter.
Greeting
Andres
Edited by: user10387663 on Jan 6, 2011 1:05 PMI believe what you're looking for is in here:
http://download.oracle.com/docs/cd/E16671_01/bh.200/e16641/portlets_install.htm#CBHIHBCD
That's a link to the Installation Guide for the Beehive Portlets, including a section specific to Oracle WebCenter Portal. What was called Beehive Conferencing is now being sold as WebCenter Conferencing (as part of WebCenter Real-Time Collaboration).
Hope that helps,
--Marc -
hi
I have done my SAP FI.Can anyone pls send a real time project and I would like to understand the real world scenarios ,challenges faced by SAP FI consultants dring his job.This will help me understand more about SAP practically.
Thanks
bivi85hi
I have done my SAP FI.Can anyone pls send a real time project and I would like to understand the real world scenarios ,challenges faced by SAP FI consultants dring his job.This will help me understand more about SAP practically.
Thanks
bivi85
Maybe you are looking for
-
Errors with interactive pdf containing motion paths
I have created an interactive pdf in indesign with simple motion paths. In the preview in indesign it works perfect, but the animations do not work in the exported pdf. This is created in CS6 and I have the creative suite standard installed.
-
Default Profit Center - Bank G/L Accounts
I am using document splitting functionality. How to default profit center for Bank G/L while using Bank Reconciliation Account?
-
Flying tracks from laptop to iMac
Since I can't record vocals at home (the neighbors won't allow) I was thinking of recording the vocals on a Mac laptop at the home of the singer and then transferring just the vocal tracks back to my iMAC for the final editing. What steps would I tak
-
XI Playground - how much memory
Hello all, beside i read all the sizing stuff, my question is: How much memory does a Testcomputer need to have a nice System to Develop some Scenarios. My first xi had 1,5 GB and that was a bit too less:-). Actually a 640 Abap+J2ee Add in in my opin
-
So.. I installed arch and built what I think is the perfect OS, aside from a few minor things. The biggest problem is that I seem to use way too much cpu power while watching vids. For the record, I use the "youtube flash to html5" firefox plugin t