Permission when moving from my two Macs to a NAS

Hello,
My problem is when I move/copy a file or a whole folder from my MBP (OSX10.9) or my iMac (OS10.6.8) to a NAS. If I don't change the file permissions to RW-everyone before I move the folder, then when it lands on the NAS I can't modify the folders (can't write, rename, add anything to the folder), even though I am connecting to it from one of the two computers mentioned above. I understand that it is a file permission issue and how it works, but how can I correct this? I mean in the past I made some mistakes (by not minding the permission before I moved something to the NAS), but how can I change the permissions on the NAS? I tried with terminal, but it doesn't allow me to change the permissions on the folders on the NAS. Not to mention that Get Info at the Finder level is uselss in this case.
Please help.
Thanks,
MM

Thanks Allan,
Here are the details about the NAS:
Brand: EMC IOmega (now Lenovo)
Model: PX4-300D with 4x2TB SATA drives
NAS connects to Netgear router (Ethernet & WiFi)
Macs connect to NAS via WiFi
Both Macs connect to the NAS via SMB. I also tried CIFS, but the result from the POV of the described problem is the same: negative.

Similar Messages

Why are some of my files now missing when moving from pc to mac when using an external drive

I use an external drive for all my files. I moved to a Mac Mini last week. Now I can not view a majority of my backed up files on My Book external drive.
Any ideas???? Thanks in advance,

See Make a split library portable. A portable library can be stored entirely on an external drive and moved between Mac and Windows computers. iTunes takes a little longer to open the library the first time after each switch. If your drive is currently formatted to NTFS then you will need an additional driver to enable OS X to write to the drive, or simply clone the library to an HFS+ drive.
tt2

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

Paragon even has non-destriuctive conversion utility if you do want to change drive.
Hard to imagine using 3TB that isn't NTFS. Mac uses GPT for default partition type as well as HFS+
www.paragon-software.com
Some general Apple Help www.apple.com/support/
Also,
Mac OS X Help
http://www.apple.com/support/macbasics/
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725
Apple Mac App Store
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store
How to Buy Mac OS X Mountain Lion/Lion
http://www.apple.com/osx/how-to-upgrade/
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
Mac OS X Community
https://discussions.apple.com/community/mac_os

What should I do to setup a new MacBook pro for first time when moving from a PC?

What should I do to setup a new MacBook pro for first time when moving from a PC?

you have to use the migration assistant if you want your files transfered from your pc to mac this link will be helpful
http://support.apple.com/kb/HT4796

HT1515 I have moved from windows to mac and had to reset my airport. I am trying it to join the existing wireless network. the process ends in an unexpected error. The ethernet connection seems to work OK

I have moved from windows to mac and had to reset my airport express. After the reset I enter the name of the existing network, name the base unit, enter its password twicw and select additional options as join the existing network. It comes back with a screen asking for the name of the base unit and password. Aftre which it starts cycling between "waiting for airport express", "connecting to 'network name'" and ends with an error message. When I try to set up using ethernet cable evrything works but I need wireless (it worked OK just hours ago). Any advice?
Thank you

Hello, vgafromva.
Thank you for visiting Apple Support Communities.
Sometimes a simple power cycle of the AirPort can resolve this issue. However, here is an article I would recommend going through when experiencing issues connecting to Wi-Fi.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
If these steps do not resolve the issue, please reply back with the exact error message received.
Cheers,
Jason H.

When moving from one master block to detail block it must save record.

when moving from master block to detail block it must save record or it will give message like 'save changes '....
when i write it ,but this message will be coming.
But if i save record message will appear two times.
plz Help me.
Thanks & Regards
Venkata.
Message was edited by:
venkata

Hi,
you could ask for Form_Success when moving to detail_block (in wehn-new-block-instance i.e.) and if not form_success you could show an alert to ask for commit changes...
Jose.

I've just moved from PC to Mac, with my PC i and using Vmware Player I used to work on 2 Virtual M/C both on 2 external drives, one Windows Server 2000 as operating system and the sec. WindowsXP, is their a way to open these m/c on my mac

I've just moved from PC to Mac, with my PC i and using Vmware Player I used to work on 2 Virtual M/C both on 2 external drives, one Windows Server 2000 as operating system and the sec. WindowsXP, is their a way to open these m/c on my mac

I am so glad to hear about your success. As you are new to the Mac environment, I will be glad to help you more.
You said: "I can't change the setup yet but i have access". I don't understand what you mean about changing the setup! Please let me know more about that.
I also recommend to use Boot Camp, which allows you to install windows on a partition of your internal hard drive. This has many benefits. First, you can restart your computer and start up in windows. This makes your Mac device a complete windows machine and you gain the most from your hardware when working in Windows. Second, if a problem occures to your Mac OS X, you can restart your machine in Windows and prevent your data from getting lost. Third, you can import the Windows installed on the boot camp partition in to the Mac OS X using VMWare Fusion and work with it as a virtual machine. In this situation, VMWare enables you to work directly with your Windows in the boot camp partition. So it does not create a file package for the virtual machine in OS X.
Regarding the data safety and reliablity, I strongly recommend using Time Machine. You can also set it up to back up your virtual machines or not. This is possible to set up in the Virtual Machine Preferences Page in VMWare Fusion, or in the Time Machine preferences page in the System Preferences app of OS X.
Please don't hesitate to ask any other question. I will be glad to help you.

I have an iPad 2 and receive e-mail through internet connection. When I delete e-mails, and clear my Trash folder, they re-appear. Setting are for remove from server when moved from Inbox. Any idea what I can do to actually delete them?

I have an iPad 2 and receive e-mail through regular internet connection. Lately, when I delete e-mails, and clear my Trash folder, they re-appear, downloaded anew from the server and marked as unread. My e-mail Advanced Settings are selected for "Remove from server when moved from Inbox." Even when I access the e-mail accountfrom my desktop and delete the e-mails, the re-appear on my iPad. Does anyone have any idea what is causing this and what I can do to actually delete them?

Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
Exchange 2003 server into the domain/forest.
You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
So it sounds like you are not looking in the right location within ADSIEdit.
You may find the following article also helpful for this issue which is the same resolution:
http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

Can you keep your playlist when moving from computer running xp to computer running vista. v

can you keep your playlist when moving from computer running xp to computer running vista as i keep losing my playlists when using computer with vista running on it.ipod touch 3rd gen set up originally on computer running xp.thanks.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

When moving from a list of threads view to a thread would be nice to jump to last thread read.

When moving from a list of threads being viewed to a thread, it would be nice to jump to last thread read or first unread thread.
Sometimes the threads get rather long. Sometimes I haven't read a thread in awhile & I forget where I have left off reading a thread. It would be nice to have an icon to click on to move to your last read post or the first non-read post.
Seems this could be implemented in javascript without too much problem. Might be a problem of when to get rid of the tracking data.
Robert

This would be a new capability. I didn't know you could jump directly to the last post in a thread by clicking on the posters name in your discussions. However, I am interested in jumping to the first post that I haven't read.
Since writing my original post, I realize that software doesn't know what posts I have read. Lets say there are are 26 posts in a thread. Lets assume these are divided into three pages with at most 10 items in a page:
page 1 -- a, b, c, d, e, f, g, h, i, j
page 2 -- k, l, m, n, o, p, q, r, s, t
page 3 -- u, v, w, x, y, z
The software know that I have viewed the first three pages. It doesn't know what post on the pages I have read. The software would need to assume I have read all the available posts on a page.
Now lets assume that 12 more post were added. This results in:
page 1 -- a, b, c, d, e, f, g, h, i, j
page 2 -- k, l, m, n, o, p, q, r, s, t
page 3 -- u, v, w, x, y, z, aa,bb,cc,dd
page 4 -- ee,ff,gg,hh,ii,jj,kk,ll
It would be nice if I could go to aa.
Jumping to the last post in the thread doesn't hack it. You have to spend a lot of time finding where you left off your reading.
Intesting, the list of your posts on your homepage usings the term Last Activity were as Your Discussions uses the term Last Post. The terminalogy should be the same & should act the same. For the existing capability of going the the last post, I was thinking of Goto Last Post.

Performance issue when moving from 4.6c to 6.0

Looks like we took a performance hit when moving from 4.6c to 6.0 on the same hardware.
For example, our PGI on outbound deliveries now takes several seconds longer in 6.0 then it did in 4.6c. We've noticed other SAP area's are taking longer as well. With an ST05 sql trace on the PGI in 6.0, we see more tables being accessed, same tables being access differently taking longer. All leading to more time to do a PGI in 6.0.
Has anyone else noticed this increase in Response time when upgrading to 6.0 ?
Thanks,
David

Hello.
Yes, in our system we noticed the same thing at start. The general performance seemed to get worse after upgrading. In fact, database became bigger and more memory is consumed. However, it was tuned up by our system administrator and now seems ok.
Run the optimizer statistics and see if it get's better.
Regards.
Valter Oliveira.

Iphone5 - lost my contacts when moving from BT Yahoo to BT Mail. I do not back up to iCloud and I did not use my mail account for contacts. Can anyone help to find and restore my contacts?

IPhone5. I have lost my contacts when moving from BT Yahoo to BT Mail. I do not backup to iCloud and do not use my mail account to store contacts. Can anyone help find the contacts on my phone and restore them?

Contacts are designed to be synced to a supported application on the computer or a cloud service like Gmail, iCloud, or an Exchange server.
Have you failed to use the device as designed?

Just moving from PC to Mac. How do you select a group of items. On the PC it was shift right click

Just moving from PC to Mac. How do you select a group of items. On the PC it was shift right click

In list or column view, click the item at one end of the range and then shift-click the item at the other end.
In icon view, click on an empty part of the window and drag to select them.
(113533)

'Finder wants to make changes' when copying files between two Macs

Hey all,
I've read a few versions of this problem on the forums here but haven't tracked down a solution.
I have two Macs on the same network – I recently got a second-hand Mac Pro, and my Macbook Air. The computers are both on the network and can browse their respective folders and the like, but when I go to copy or sync files between the computers, I get a file permission issue.
Finder on either computer prompts: 'Finder wants to make changes. Enter your password'. At the same time a corrupted version of the file copies to the other computer but with 0 bytes that doesn't open...
Has anyone solved this issue before – it'd be greatly appreciated to hear any approaches!

On the laptop I got 513
Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Remove copy from server 'when moved from inbox' option for POP accounts

Is this option supposed to work in all cases? (or could it be buggy?:-)
I can't get it to work with my POP account: messages are still left on the POP server, even after when they are moved from the inbox to another local mailbox on my Mac...
Manual selective removal of messages from the server does work (thru the 'Get info' window of the 'Gear' menu at bottom of Mailboxes pane), so this does seem to be a problem with the POP server.
Or do I by any chance misinterpret the meaning of this option?
PowerBook G4 Mac OS X (10.4.7) Mail version 2.1 (752/752.2)

You've interpreted correctly how it should work, as long as you take the following considerations into account:
1. Messages aren't supposed to be removed from the server immediately, but rather the next time Mail connects to the POP server.
2. It may have no effect on messages that had already been downloaded prior to you choosing that option.
And, yes, it sometimes doesn't work as expected. It could be buggy or Mail might have problems communicating with the server.

Permission when moving from my two Macs to a NAS

Similar Messages

Maybe you are looking for