Permissions are incorrectly ordered Error

I was looking to change some permissions on out AD when I right clck on the root in our domain hit properties then the security tab I get a Pop up
The permissions on THISMOMAON.COM are incorrectly ordered, which may cause some entries to be innefective.
Tor order the permissions correctly click reorder.
To leave the permissions unchanged (the view will be read only) Click cancel.
If this were just a folder or OU I'd just hit reorder but since I don't know exactly what it does it makes me nervous hitting reorder on the root. But since I don't all the settings are grayed out as in read only. Does anyone know what this means?
Jason
Take a system state backup of at least one DC with global catalog. Once done, run the reorder action outside of Business hours. If you noticed that something went wrong then you can do an authoritative restore.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Similar Messages

FOLDER PERMISSIONS are LOCKED and BLOCKED

Recently, the folders I create and place on our server are locked for everyone else accessing the server.
The read and write access is denied for all else accept when using my iMac. It seems to be as a default and I can't turn it off. Even if I try to unlock them and change the read/write permissions, they still remain locked. I figure its a permissions issue? I have already used my *disk utility* to verify the drive and repair. Anyone know the answer to this?

could be ACL (access control lists) permissions are incorrect. ACL's are turned on be default in Leopard and Leopard server. if you are using Leopard server, there is a gui interface you can use to change them, if not you will have to use command line techniques or a freeware program called sandbox.
There is much acl permission info to be found in previous forum discussions.

HT204053 I changed my AppleID in System Preferences, but the old ID comes up under iCloud and I get an error box saying my "ID or password are incorrect". How do I get rid of the old ID which now doesn't work with either my old or new password??

I changed my AppleID in System Preferences, but the old ID comes up under iCloud and I get an error box saying my "ID or password are incorrect". How do I get rid of the old ID which now doesn't work with either my old or new password??

Yes that makes sense, however have you updated it at My Apple ID before trying to change it in your system preferences > iCloud settings, you must do that first.

When priniting jewel case inserts, my song order is reversed. The numbering is correct, but the song titles are incorrect. This only happens on jewel case inserts. Any insight would be greatly appreciated.

When priniting jewel case inserts, my song order is reversed. The numbering is correct, but the song titles are incorrect. This only happens on jewel case inserts. Any insight would be greatly appreciated.

Hi,
I have exactly, exactly!! thesame annoying problem you have or had. I don't know what to do and i am reallyfrustrated with the dumb limited inside the box solutions offered to me. It'slike if you have a problem with your ipod or iphone you can either restore it,uninstall/reinstall itunes and thats pretty much it. I am sorry but that isjust f***** up.
anyway, regardless to all that,i was wondering if you had any success in solving this problem (something otherthan using a different computer which oddly enough seemed to work for somereason..?? why???, weird) since April.
I am on the edge of givingup.
thank you in advance.

What do I do with this error message: To use this library, make sure its file permissions are set correctly.

So I cannot even access the application. It was working fine yesterday and today I get this error message:
To use this library, make sure its file permissions are set correctly.
I have changed nothing. All the pictures are there on the computer. Help?!

Reboot. Close any programs which open at start-up. Run Disk Utility (you can type this in the Spotlight search field at the right end of your Menubar).
In Disk Utility, select your drive from the list on the left, and click "Repair Disk Permissions". This will take a few minutes, but should be less than ten.
Reboot.
Try to open your Library in Aperture. What happens?

Gmail question. I'm getting an error message that states my username or password are incorrect. I haven't changed anything and the gmail is working fine on the mac book. The mail function worked yesterday on the iphone but not today - any solutions??

Gmail question. I'm getting an error message that states my username or password are incorrect. I haven't changed anything and the gmail is working fine on the mac book. The mail function worked yesterday on the iphone but not today - any solutions??

Try Restarting / rebooting your Mac before doing anything more drastic..
S.

When I go to duplicate a presentation I get the following error: Unsaved Keynote Document. Autosave couldn't be moved because you don't have permission to access AutoSave Information? My permissions are set at read

When I go to duplicate a presentation I get the following error: Unsaved Keynote Document. Autosave couldn't be moved because you don't have permission to access AutoSave Information? My permissions are set at read & write.

I noticed that I have three different log in accounts on my computer, much to my surprise. Could that be causing this problem?
That's unlikely. You would have had to save a document into another user's account and be trying to work on it - directly from their account.
"“Unsaved Pages Document.pages” couldn’t be moved because you don’t have permission to access “Autosave Information”.
Have you checked the permissions on your Autosave Information folder? Here are mine.

TS1550 Error message: Backup Failed. However if the startup disk permissions are repaired one only backup will succeed before the permissions are again repaired. How is this to be fixed?

Error message: Backup Failed. However if the startup disk permissions are repaired one backup will succeed before the permissions are again repaired. How is this to be fixed?

Hi,
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Then Repair the backup Disk... any change?

MB26 : ERORR : goods movement are incorrect

Hai SAP experts,
After the MRP run , the planned orders created gets converted to production orders .So as per BOM , the components require to produce the ordered material gets reserved against that production order & Is shown as orders in stock requirement list for component materials . When i go to MB56 t code , and given details and execute that one It showing different components and system assign automatically storage location and batch number.At the time of save its showing error
" goods movement are incorrect "
Thanks

Hai,
I am MM consultant .Before that i am not working on reservation for production order . I dont know what the use of MB26,
As per discussion with my collegues , they told that in MB26 ,system shows the goods movement overview .When you click save button i.e , Post button ,then goods are posted but here its showing error
GOODS MOVEMENTS ARE INCORRECT .
This error comes only at the time of 261 mvt type GI to Production order .
IN the case of 311 this error is not getting .Give me suggestions
Thanks
Edited by: babbullu on Oct 20, 2011 3:10 AM
Edited by: babbullu on Oct 20, 2011 3:10 AM

Open Credit values are incorrect

The open value credit values are incorrect. we have to run RVKRED77 every night to correct them. We have been unable to replicate the error so the SAP position is they need to replicate the error in order to fix it. I can see the S067 strucures with the incorrect values. A further problem is that as the day goes on the values get corrupted and are not fixed until the correction is ran. I have been reviewing OSS note 124571

Hi Dave,
I was able to fix the issue by implementing OSS note 491718.
As for the cleanup - ohhhh boy, I have been working on it for over a year and it's still not done. I can only manage one CCA per weekend. I run Z_CREDIT_VALUE_COMPARE (oss note 666587) every Friday for a given CCA to identify the customers with incorrect value. I then update a default variant for RVKRED77 and enter the CCA and the list of identified customers. RVKRED77 is setup as a job (with the default variant) to be executed every Saturday night after the system backup. This will ensure that users will not be in the system and not have any locks on SD tables. Otherwise, RVKRED77 will fail since it cannot get a lock on SD tables.
SAP has yet to come up with a better approach to correct these incorrect values and to prevent it from happening again. However, SAP Solution Manager and central consistency monitoring (Data Consistency Cockpit) may help by notifying you as soon as this issue appears again. You can read more on this in OSS note 1040893.
Hope this helps,
Keyvan

What permissions are needed on the client side for RunspaceFactory.CreateRunspace?

Hi.
I am running a remote powershell command from an IIS application to an Exchange server getting the below error. Everything works fine if the IIS application pool identity is in the local administrators group on the IIS server so we can rule out issues with
firewall or anything on the Exchange server. It is a problem with lack of privileges on the local server.
So my question is: What permissions are required on the local server for RunspaceFactory.CreateRunspace? I find good documentation on the permissions required on the server side, but nothing about the client side.
The last Win32 error code after failure is 1008.
An internal error occurred.
at at System.Management.Automation.Remoting.Client.WSManClientSessionTransportManager.Initialize(Uri connectionUri, WSManConnectionInfo connectionInfo)
at System.Management.Automation.Remoting.Client.WSManClientSessionTransportManager..ctor(Guid runspacePoolInstanceId, WSManConnectionInfo connectionInfo, PSRemotingCryptoHelper cryptoHelper)
at System.Management.Automation.Remoting.ClientRemoteSessionDSHandlerImpl..ctor(ClientRemoteSession session, PSRemotingCryptoHelper cryptoHelper, RunspaceConnectionInfo connectionInfo, URIDirectionReported uriRedirectionHandler)
at System.Management.Automation.Remoting.ClientRemoteSessionImpl..ctor(RemoteRunspacePoolInternal rsPool, URIDirectionReported uriRedirectionHandler)
at System.Management.Automation.Internal.ClientRunspacePoolDataStructureHandler..ctor(RemoteRunspacePoolInternal clientRunspacePool, TypeTable typeTable)
at System.Management.Automation.Runspaces.Internal.RemoteRunspacePoolInternal..ctor(Int32 minRunspaces, Int32 maxRunspaces, TypeTable typeTable, PSHost host, PSPrimitiveDictionary applicationArguments, RunspaceConnectionInfo connectionInfo)
at System.Management.Automation.Runspaces.RunspacePool..ctor(Int32 minRunspaces, Int32 maxRunspaces, TypeTable typeTable, PSHost host, PSPrimitiveDictionary applicationArguments, RunspaceConnectionInfo connectionInfo)
at System.Management.Automation.Runspaces.RunspaceFactory.CreateRunspacePool(Int32 minRunspaces, Int32 maxRunspaces, RunspaceConnectionInfo connectionInfo, PSHost host, TypeTable typeTable, PSPrimitiveDictionary applicationArguments)
at System.Management.Automation.RemoteRunspace..ctor(TypeTable typeTable, RunspaceConnectionInfo connectionInfo, PSHost host, PSPrimitiveDictionary applicationArguments)
at System.Management.Automation.Runspaces.RunspaceFactory.CreateRunspace(RunspaceConnectionInfo connectionInfo, PSHost host, TypeTable typeTable, PSPrimitiveDictionary applicationArguments)
at System.Management.Automation.Runspaces.RunspaceFactory.CreateRunspace(RunspaceConnectionInfo connectionInfo)

Thanks Daniel.
I see that the IIS server has a GPO setting 'Allow log on locally' to the local administrators group for this server. I will order add of the IIS app pool identity to this list.
I tried the process monitor comparing runs with and without the app pool identity as local administrator. The runs are identical up to the point where one does something useful and the other closes 'HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN'.
There are no failures.
I am not using my runspace objects for multiple threads. I dispose after use.
I will end up with the below if I change. Comments?
public static PowershellResult RunPowerShellCommandExchange2010(string exchangeServer, string command, ICollection<KeyValuePair<string, object>> parameters, string usr, string pwd) {
WindowsImpersonationContext impersonationContext = null;
try {
impersonationContext = WindowsIdentity.Impersonate(IntPtr.Zero);
GetProcessInformation();
try {
var connectionInfo = GetExchange2010ConnectionInfo(exchangeServer, usr, pwd);
using (var runspace = RunspaceFactory.CreateRunspacePool(1, 1, connectionInfo)) {
using (PowerShell powershell = PowerShell.Create()) {
var psCommand = new PSCommand();
if (parameters != null) {
psCommand.AddCommand(command);
foreach (KeyValuePair<string, object> parameter in parameters) {
if (parameter.Value == null) psCommand.AddParameter(parameter.Key);
else psCommand.AddParameter(parameter.Key, parameter.Value);
} else {
//if parameters argument is null the command will be treated as script
psCommand.AddCommand(new Command(command, true));
powershell.Commands = psCommand;
runspace.Open();
powershell.RunspacePool = runspace;
var resultPSObjects = powershell.Invoke();
var psResult = new PowershellResult {
PSObjects = resultPSObjects,
Errors = powershell.Streams.Error.ToList()
return psResult;
} catch (Exception ex) {
var windowsIdentity = WindowsIdentity.GetCurrent();
int errorCode = Marshal.GetLastWin32Error();
if (windowsIdentity != null) throw new Exception(string.Format("Failed to run Exchange powershell command '{0}' as user {1} passing executing user {2} due to: {3} at {4}. Server: {5}. Last error code: {6}", command, windowsIdentity.Name, usr, ex.Message, ex.StackTrace, exchangeServer, errorCode), ex);
throw new Exception(string.Format("Failed to run Exchange powershell command '{0}' as unknown user passing executing user {1} due to: {2} at {3}. Server: {4}. Last error code: {5}", command, usr, ex.Message, ex.StackTrace, exchangeServer, errorCode), ex);
} finally {
if (impersonationContext != null) {
impersonationContext.Undo();
Tore Olav Kristiansen

Permissions are all messed up in 10.9

I installed Mavericks 10.9 on my 2008 Mac Pro desktop a couple of months ago. Then the monitors (2 of them) developed odd patterns. Apple Care (AC) tried to help me start 10.9 in Safe Mode, but when the progress bar finished, the computer shut itself off. We could never start in Safe Mode. Then AC diagnosed a hardware problem and recommended an Apple repair shop near me. The the video card was bad and they replaced it. But when they got things running, the permissions were very screwed up. They spent a lot of time repairing them (I don't know how), and then they upgraded the MacHD from a 1.5T Seagate to a 2T Western Digital and cloned the old MacHD to the new 2T drive. I took the machine home and still had permission problems and other problems. Adobe Acrobat Pro would not print PDF files, which I fixed with a suggestion from the Apple Forum. Then Photoshop CS4 gave me a "License Expired" message (Error code 150:30). I fixed that from the Forum (Adobe Community > Downloading, Installing, Setting Up > Discussions: Error code 150:30), with a fix that required a little entry in Terminal ($ sudo sh install_fnp.sh). That allowed me to open Photoshop, but when I turned Photoshop off and restarted it I got the "License Expired" message again.
On the advice of Apple personnel in the Apple Store in Spokane, I unstalled Photoshop CS4 and reinstalled it from the CS4 Suite DVDs, installing just PS with all the supporting apps that the installation automatically chose. Then when I started PS, I got an error "Don't have adequate permission access" or something like that that has been addressed in the Forums. From the Forums, I followed the suggestion of adding "username(me)" to the permissions window of the Info panel of the MacHD and choosing "Apply to enclosed items". That got rid of the "Don't have adequate permission access" error, but I got back the "License Expired" error again and PS wouldn't open. When I tried the "sudo sh instyall_fnp.sh" fix again, I discovered that I couldn't log in to Terminal:
Last login: Thu Feb 20 18:27:35 on console
login(12166,0x7fff7cf59310) malloc: *** error for object 0x7fe65b500180: pointer being freed was not allocated
*** set a breakpoint in malloc_error_break to debug
[Process completed]
Meanwhile, using Disc Utility and "Verify Permissions" I see that my Permissions are still totally messed up. So I don't know what to do now.
I also have a Macbook Air. I see that in "Disk Utility > Verify Disk Permissions", the Permissions are also messed up on my Macbook Air, on which I installed 10.9 recently, but it seems to be working ok, so I have just left it alone.
I'm the Administrator and only User on this system. The Permissions remain a huge mystery to me. What is the difference between "Administrator", "System", and "Username(me)"? Should all these be present, with "Read & Write" access? And how do you fix such global Permissions problems?
Can anyone help?
Thanks.

You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
Repair User Permissions

Permissions are not displaying correctly on Yosemite server

My file and folder permissions are not displaying correctly on my Yosemite server when viewed from a Yosemite client.
I have set these permissions from the server app on the server and have added local network groups for the appropriate folders on the share. When checked from the server's finder, everything looks correct. The server is setup for both AFP and SMB on file sharing. I have also tried setting permissions from the server's finder and seemed to make no difference.
When logged into from local or VPN Yosemite clients using AFP, the permissions do not show anything but postgres user and everyone group. Even though they should have network groups such as skoogfinancial, skoogmarketing, etc.
The server does seem to enforce the permissions correctly though a user cannot get into folders he does not have permissions for.
Therefore, it seems the server is enforcing correctly, but a user may not understand what is going on as the permissions list doesn't list anything meaningful.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Cannot open the file because the open options are incorrect

I'm trying to iterate through a folder of images, open each one of them, duplicate them into another photoshop file and close the individual image. This code works great on a PC (Photoshop CS3), but when I run it on our macs (Photoshop CS3) I will receive the following error on random images. "Error: Cannot open the file because the open options are incorrect" Does anyone know how to solve this problem? I've read about possibly setting the OpenDocumentType but have not seen an example anywhere. This error will sometimes occur after loading in one image or sometimes after 20 images. Sometimes I run it on the same directory multiple times all with various points of error. Sometimes every images is loaded. Any help would be much appreciated. Sample code is below.
i //CODE BELOW
i //allows the user to select an folder full of images
b var inputFolder = Folder.selectDialog("Select a folder that contains the files you want added as layers.");
b var fileList = inputFolder.getFiles();
b var tempRef = app.open(tempName);
b for (var i = 0; i < fileList.length; i++)
b {
b var tempName = fileList[i];
b var tempStringName = fileList[i].toString();
i //used to check if the file in the directory does in fact contain the .png extension
b var reducedFileName = tempStringName.substring(tempStringName.lastIndexOf("/")+1);
b if(reducedFileName.substring((reducedFileName.length - 4),(reducedFileName.length)) != ".png" || reducedFileName.substring((reducedFileName.length - 4),(reducedFileName.length)) != ".PNG")
b {
i //setting reference to opened docuement PNG file
i //This seems to be the section throwing the error. Surrounding with Try Catch revealse the Error noted above
b var tempRef = app.open(tempName);
i //setting a tempName variable to the PNG file name
b var tempName = app.activeDocument.name;
i //setting reference to the active layer in the file
b var graphicLayer = app.activeDocument.activeLayer;
i //setting the PNG layer name to the PNG file
b tempRef.layers[0].name = tempName;
i //duplicating the image onto the opened Photoshop file
b tempRef.layers[0].duplicate(backRef);
i //closing the original PNG file without saving
b tempRef.close(SaveOptions.DONOTSAVECHANGES);
b }
b }

It looks as if the folder contains non Photoshop files, one way around the problem would be to change
var fileList = inputFolder.getFiles();
To specify the file types you want to process IE:
var fileList = inputFolder.getFiles(/\.(jpg|tif|psd|crw|cr2|nef|dcr|dc2|raw)$/i);

Open options are incorrect (Trial Version)

Whenever I try and try and open a photo of any kind, I get a script error that says "Error: Cannot open the file because the open options are incorrect:1". I have looked everywhere and nothing has helped me.
Here is the system info:
Adobe Photoshop Version: 2014.2.2 20141204.r.310 2014/12/04:23:59:59 CL 994532 x64
Operating System: Windows 8.1 64-bit
Version: 6.3
System architecture: Intel CPU Family:6, Model:14, Stepping:4 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3700 MHz
Built-in memory: 8110 MB
Free memory: 4523 MB
Memory available to Photoshop: 7039 MB
Memory used by Photoshop: 70 %
3D Multitone Printing: Disabled.
Windows 2x UI: Disabled.
Highbeam: Enabled.
Image tile size: 1024K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Display: 2
Display Bounds: top=0, left=1920, bottom=1080, right=3840
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGLGPUs=2
NumCLGPUs=2
glgpu[0].GLVersion="3.0"
glgpu[0].GLMemoryMB=2048
glgpu[0].GLName="AMD Radeon R9 200 Series"
glgpu[0].GLVendor="ATI Technologies Inc."
glgpu[0].GLVendorID=4098
glgpu[0].GLDriverVersion="14.502.1014.0"
glgpu[0].GLRectTextureSize=16384
glgpu[0].GLRenderer="AMD Radeon R9 200 Series"
glgpu[0].GLRendererID=26641
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atium d64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm6 4.dll"
glgpu[0].GLDriverDate="20150318000000.000000-000"
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.40"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[2147 483647]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[16384]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[16384]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[128]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[29]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
clgpu[0].CLPlatformVersion="2.0 AMD-APP (1642.5)"
clgpu[0].CLDeviceVersion="1.2 AMD-APP (1642.5)"
clgpu[0].CLMemoryMB=2048
clgpu[0].CLName="Pitcairn"
clgpu[0].CLVendor="Advanced Micro Devices, Inc."
clgpu[0].CLVendorID=4098
clgpu[0].CLDriverVersion="1642.5 (VM)"
clgpu[0].CUDASupported=0
clgpu[0].CLBandwidth=1.46797e+011
clgpu[0].CLCompute=1075.05
glgpu[1].GLVersion="3.0"
glgpu[1].GLMemoryMB=2048
glgpu[1].GLName="AMD Radeon R9 200 Series"
glgpu[1].GLVendor="ATI Technologies Inc."
glgpu[1].GLVendorID=5140
glgpu[1].GLDriverVersion="14.502.1014.0"
glgpu[1].GLRectTextureSize=16384
glgpu[1].GLRenderer="AMD Radeon R9 200 Series"
glgpu[1].GLRendererID=140
glgpu[1].HasGLNPOTSupport=1
glgpu[1].GLDriver="aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atium d64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm6 4.dll"
glgpu[1].GLDriverDate="20150318000000.000000-000"
glgpu[1].CanCompileProgramGLSL=1
glgpu[1].GLFrameBufferOK=1
glgpu[1].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.40"
glgpu[1].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[2147 483647]
glgpu[1].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
glgpu[1].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
glgpu[1].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
glgpu[1].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
glgpu[1].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[1].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[16384]
glgpu[1].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[16384]
glgpu[1].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[128]
glgpu[1].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[29]
glgpu[1].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[1].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[1].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[1].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[1].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[1].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[1].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[1].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[1].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[1].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
clgpu[1].CLPlatformVersion="2.0 AMD-APP (1642.5)"
clgpu[1].CLDeviceVersion="1.2 AMD-APP (1642.5)"
clgpu[1].CLMemoryMB=2048
clgpu[1].CLName="Pitcairn"
clgpu[1].CLVendor="Advanced Micro Devices, Inc."
clgpu[1].CLVendorID=4098
clgpu[1].CLDriverVersion="1642.5 (VM)"
clgpu[1].CUDASupported=0
clgpu[1].CLBandwidth=1.49926e+011
clgpu[1].CLCompute=1085.75
License Type: Tryout Version
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
Temporary file path: C:\Users\Nathan\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 931.1G, 532.2G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2014/08/12-23:42:09   79.557478   79.557478
   adbeape.dll   Adobe APE 2013/02/04-09:52:32   0.1160850   0.1160850
   AdbePM.dll   PatchMatch 2014/09/07-21:07:38   79.558079   79.558079
   AdobeLinguistic.dll   Adobe Linguisitc Library   8.0.0
   AdobeOwl.dll   Adobe Owl   5.2.4
   AdobePDFL.dll   PDFL 2014/08/18-15:13:12   79.512424   79.512424
   AdobePIP.dll   Adobe Product Improvement Program   7.2.1.3399
   AdobeXMP.dll   Adobe XMP Core 2014/08/20-09:53:02   79.156797   79.156797
   AdobeXMPFiles.dll   Adobe XMP Files 2014/08/20-09:53:02   79.156797   79.156797
   AdobeXMPScript.dll   Adobe XMP Script 2014/08/20-09:53:02   79.156797   79.156797
   adobe_caps.dll   Adobe CAPS   8,0,0,13
   AGM.dll   AGM 2014/08/12-23:42:09   79.557478   79.557478
   ahclient.dll    AdobeHelp Dynamic Link Library   1,8,0,31
   amtlib.dll   AMTLib (64 Bit)   8.0.0.122212002 BuildVersion: 8.0; BuildDate: Wed Jul 30 2014 15:59:34)   1.000000
   ARE.dll   ARE 2014/08/12-23:42:09   79.557478   79.557478
   AXE8SharedExpat.dll   AXE8SharedExpat 2013/12/20-21:40:29   79.551013   79.551013
   AXEDOMCore.dll   AXEDOMCore 2013/12/20-21:40:29   79.551013   79.551013
   Bib.dll   BIB 2014/08/12-23:42:09   79.557478   79.557478
   BIBUtils.dll   BIBUtils 2014/08/12-23:42:09   79.557478   79.557478
   boost_date_time.dll   photoshopdva   8.0.0
   boost_signals.dll   photoshopdva   8.0.0
   boost_system.dll   photoshopdva   8.0.0
   boost_threads.dll   photoshopdva   8.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.2.6.32411   2.2.6.32411
   CITThreading.dll   Adobe CITThreading   2.2.6.32411   2.2.6.32411
   CoolType.dll   CoolType 2014/08/12-23:42:09   79.557478   79.557478
   dvaaudiodevice.dll   photoshopdva   8.0.0
   dvacore.dll   photoshopdva   8.0.0
   dvamarshal.dll   photoshopdva   8.0.0
   dvamediatypes.dll   photoshopdva   8.0.0
   dvametadata.dll   photoshopdva   8.0.0
   dvametadataapi.dll   photoshopdva   8.0.0
   dvametadataui.dll   photoshopdva   8.0.0
   dvaplayer.dll   photoshopdva   8.0.0
   dvatransport.dll   photoshopdva   8.0.0
   dvaui.dll   photoshopdva   8.0.0
   dvaunittesting.dll   photoshopdva   8.0.0
   dynamiclink.dll   photoshopdva   8.0.0
   ExtendScript.dll   ExtendScript 2014/01/21-23:58:55   79.551519   79.551519
   icucnv40.dll   International Components for Unicode 2013/02/25-15:59:15    Build gtlib_4.0.19090
   icudt40.dll   International Components for Unicode 2013/02/25-15:59:15    Build gtlib_4.0.19090
   igestep30.dll   IGES Reader   9.3.0.113
   imslib.dll   IMSLib DLL   7.0.0.154
   JP2KLib.dll   JP2KLib 2014/06/28-00:28:27   79.254012   79.254012
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libiomp5md.dll   Intel(R) OpenMP* Runtime Library   5.0
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   LogSession.dll   LogSession   7.2.1.3399
   mediacoreif.dll   photoshopdva   8.0.0
   MPS.dll   MPS 2014/08/18-23:43:19   79.557676   79.557676
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CC 2014   15.2.2
   Plugin.dll   Adobe Photoshop CC 2014   15.2.2
   PlugPlugExternalObject.dll   Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit)   5.0.0
   PlugPlugOwl.dll   Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit)   5.2.0.54
   PSArt.dll   Adobe Photoshop CC 2014   15.2.2
   PSViews.dll   Adobe Photoshop CC 2014   15.2.2
   SCCore.dll   ScCore 2014/01/21-23:58:55   79.551519   79.551519
   ScriptUIFlex.dll   ScriptUIFlex 2014/01/20-22:42:05   79.550992   79.550992
   svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   tbb.dll   Intel(R) Threading Building Blocks for Windows   4, 2, 2013, 1114
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   4, 2, 2013, 1114
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   8.0.0.14 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   8.0.0.14
   VulcanControl.dll   Vulcan Application Control Library   5.0.0.82
   VulcanMessage5.dll   Vulcan Message Library   5.0.0.82
   WRServices.dll   WRServices Fri Mar 07 2014 15:33:10   Build 0.20204   0.20204
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   3D Studio 15.2.2 (2014.2.2 x001 x003)
   Accented Edges 15.2.2
   Adaptive Wide Angle 15.2.2
   Angled Strokes 15.2.2
   Average 15.2.2 (2014.2.2 x001 x003)
   Bas Relief 15.2.2
   BMP 15.2.2
   Camera Raw 8.8
   Camera Raw Filter 8.8
   Chalk & Charcoal 15.2.2
   Charcoal 15.2.2
   Chrome 15.2.2
   Cineon 15.2.2 (2014.2.2 x001 x003)
   Clouds 15.2.2 (2014.2.2 x001 x003)
   Collada 15.2.2 (2014.2.2 x001 x003)
   Color Halftone 15.2.2
   Colored Pencil 15.2.2
   CompuServe GIF 15.2.2
   Conté Crayon 15.2.2
   Craquelure 15.2.2
   Crop and Straighten Photos 15.2.2 (2014.2.2 x001 x003)
   Crop and Straighten Photos Filter 15.2.2
   Crosshatch 15.2.2
   Crystallize 15.2.2
   Cutout 15.2.2
   Dark Strokes 15.2.2
   De-Interlace 15.2.2
   Dicom 15.2.2
   Difference Clouds 15.2.2 (2014.2.2 x001 x003)
   Diffuse Glow 15.2.2
   Displace 15.2.2
   Dry Brush 15.2.2
   Eazel Acquire 15.2.2 (2014.2.2 x001 x003)
   Embed Watermark 4.0
   Entropy 15.2.2 (2014.2.2 x001 x003)
   Export Color Lookup Tables NO VERSION
   Extrude 15.2.2
   FastCore Routines 15.2.2 (2014.2.2 x001 x003)
   Fibers 15.2.2
   Film Grain 15.2.2
   Filter Gallery 15.2.2
   Flash 3D 15.2.2 (2014.2.2 x001 x003)
   Fresco 15.2.2
   Glass 15.2.2
   Glowing Edges 15.2.2
   Google Earth 4 15.2.2 (2014.2.2 x001 x003)
   Grain 15.2.2
   Graphic Pen 15.2.2
   Halftone Pattern 15.2.2
   HDRMergeUI 15.2.2
   HSB/HSL 15.2.2
   IFF Format 15.2.2
   IGES 15.2.2 (2014.2.2 x001 x003)
   Ink Outlines 15.2.2
   JPEG 2000 15.2.2
   Kurtosis 15.2.2 (2014.2.2 x001 x003)
   Lens Blur 15.2.2
   Lens Correction 15.2.2
   Lens Flare 15.2.2
   Liquify 15.2.2
   Matlab Operation 15.2.2 (2014.2.2 x001 x003)
   Maximum 15.2.2 (2014.2.2 x001 x003)
   Mean 15.2.2 (2014.2.2 x001 x003)
   Measurement Core 15.2.2 (2014.2.2 x001 x003)
   Median 15.2.2 (2014.2.2 x001 x003)
   Mezzotint 15.2.2
   Minimum 15.2.2 (2014.2.2 x001 x003)
   MMXCore Routines 15.2.2 (2014.2.2 x001 x003)
   Mosaic Tiles 15.2.2
   Multiprocessor Support 15.2.2 (2014.2.2 x001 x003)
   Neon Glow 15.2.2
   Note Paper 15.2.2
   NTSC Colors 15.2.2 (2014.2.2 x001 x003)
   Ocean Ripple 15.2.2
   OpenEXR 15.2.2
   Paint Daubs 15.2.2
   Palette Knife 15.2.2
   Patchwork 15.2.2
   Paths to Illustrator 15.2.2
   PCX 15.2.2 (2014.2.2 x001 x003)
   Photocopy 15.2.2
   Photoshop 3D Engine 15.2.2 (2014.2.2 x001 x003)
   Photoshop Touch 14.0
   Picture Package Filter 15.2.2 (2014.2.2 x001 x003)
   Pinch 15.2.2
   Pixar 15.2.2 (2014.2.2 x001 x003)
   Plaster 15.2.2
   Plastic Wrap 15.2.2
   PLY 15.2.2 (2014.2.2 x001 x003)
   PNG 15.2.2
   Pointillize 15.2.2
   Polar Coordinates 15.2.2
   Portable Bit Map 15.2.2 (2014.2.2 x001 x003)
   Poster Edges 15.2.2
   PRC 15.2.2 (2014.2.2 x001 x003)
   Radial Blur 15.2.2
   Radiance 15.2.2 (2014.2.2 x001 x003)
   Range 15.2.2 (2014.2.2 x001 x003)
   Read Watermark 4.0
   Render Color Lookup Grid NO VERSION
   Reticulation 15.2.2
   Ripple 15.2.2
   Rough Pastels 15.2.2
   Save for Web 15.2.2
   ScriptingSupport 15.2.2
   Shake Reduction 15.2.2
   Shear 15.2.2
   Skewness 15.2.2 (2014.2.2 x001 x003)
   Smart Blur 15.2.2
   Smudge Stick 15.2.2
   Solarize 15.2.2 (2014.2.2 x001 x003)
   Spatter 15.2.2
   Spherize 15.2.2
   Sponge 15.2.2
   Sprayed Strokes 15.2.2
   Stained Glass 15.2.2
   Stamp 15.2.2
   Standard Deviation 15.2.2 (2014.2.2 x001 x003)
   STL 15.2.2 (2014.2.2 x001 x003)
   Sumi-e 15.2.2
   Summation 15.2.2 (2014.2.2 x001 x003)
   Targa 15.2.2
   Texturizer 15.2.2
   Tiles 15.2.2
   Torn Edges 15.2.2
   Twirl 15.2.2
   U3D 15.2.2 (2014.2.2 x001 x003)
   Underpainting 15.2.2
   Vanishing Point 15.2.2
   Variance 15.2.2 (2014.2.2 x001 x003)
   Virtual Reality Modeling Language | VRML 15.2.2 (2014.2.2 x001 x003)
   Water Paper 15.2.2
   Watercolor 15.2.2
   Wave 15.2.2
   Wavefront|OBJ 15.2.2 (2014.2.2 x001 x003)
   WIA Support 15.2.2 (2014.2.2 x001 x003)
   Wind 15.2.2
   Wireless Bitmap 15.2.2 (2014.2.2 x001 x003)
   ZigZag 15.2.2
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash: NONE
Installed TWAIN devices: NONE

Frankly the information you thankfully provided is beyond my understanding, but at least I can bump the thread back up the list.
What have you done for trouble-shooting so far?
Restoring Preferences after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved might be a starting point:
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

Permissions are incorrectly ordered Error

Similar Messages

Maybe you are looking for