Permissions Change on Folder - "the requested security information is either unavailable or can't be displayed"

am I getting this message on some folders security tab, Can not delete file folder
I can't see the owner. The security tab displays"The Security tab displays "The requested security information is either unavailable or can't be displayed." I've tried to grant access via command line with no success.
Regards,
Kanna..

Testing answer - shows as only proposed so far....
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Similar Messages

  • The requested security information is either unavailable or can't be displayed.

    The requested security information is either unavailable or can't be displayed.
    Why am I getting this message on some folders security tab when I try to check the security permissions through UNC\DFS?
    If I log onto the server its fine.  I can view the security permissions
    no problem.  I've ran a check disk and checked the share permissions.
    I'm running Windows Server 2008 R2.
    Any ideas?
    Spooter

    Are you using a same user account when checking the permission via UNC and locally? Generally this is caused by permission related settings.
    As a quick test, try to give your current account Full Control permission with logged on the server locally. Then try again to see if permission will still not be displayed. 
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forum a great place.

  • The requested security information is either unavailable or cannot be displayed

    Hi all,
    I've a file server Windows 2008 (not R2) with Service Pack 2, 32 bit. I've a shared directory this directory is the target of a remote FTP server. In this directory I've some files (that a user has put in via FTP) but if I try to view their NTFS settings
    I get:
    "the requested security information is either unavailable or cannot be displayed"

    Hi Andrea,
    According to your description, it may cause by the UAC was enabled. Please try to template disable UAC for a test, then reboot the server to see if it works.
    For detailed information about UAC, please refer to the following article:
    User Account Control Step-by-Step Guide
    http://technet.microsoft.com/en-us/library/cc709691(WS.10).aspx
    In addition, please try to use Administrator account to access the Security tab. And give the administrators group ownership permission of the folder. Hope it helps.
    Best Regards,
    Aiden
    Aiden Cao
    TechNet Community Support

  • HT5620 I want to change the email address to which all the reset security information (emails) go to. But I cannot see that email address in the list when I click on the 'Name, ID and Email Addresses' section.

    I want to change the email address to which all the reset security information (emails) go to. But I cannot see that email address in the list when I click on the 'Name, ID and Email Addresses' section.
    How can I change it when I cannot view it on my account. I am not even sure how this got setup.

    If you mean your rescue email address, it's in the Passwords and Security section, after you answer the two security questions.

  • Windows 8 Remote Desktop Error "The Requested Security Package Does Not Exist"

    When my remote host (win server 2008 R2) is configured to use SSL for security layer, RDP from my Windows 8 gets  
    "An authentication error has occurred. The requested security package does not exit."
    When the host is set to use RDP security layer, it works fine. 
    Registry key solution for Win7 suggested on other posts does not seem to apply to win8.
    This is a Lenovo desktop, I uninstalled silverlight and bunch of other OEM installed programs.

    This fixed my problem in Windows 8 while connecting to a Windows 7 host.  I needed the pku2u entry.  I decided to look it up and here's the info for anyone that's interested.
    Introducing PKU2U in Windows
    Applies To: Windows 7, Windows Server 2008 R2
    This product evaluation topic for the IT professional describes the Public Key Cryptography Based User-to-User (PKU2U) security support provider (SSP) that is new in Windows 7 and Windows Server 2008 R2.
    PKU2U protocol
    The PKU2U protocol in Windows 7 and Windows Server 2008 R2 is implemented as an SSP. The SSP enables peer-to-peer authentication, particularly through the Windows 7 media and file sharing feature called Homegroup, which permits sharing
    between computers that are not members of a domain.
    How PKU2U works
    Windows 7 and Windows Server 2008 R2 introduce an extension to the Negotiate authentication package, Spnego.dll. In previous versions of Windows, Negotiate decides whether to use Kerberos or NTLM for authentication. The extension SSP for Negotiate,
    Negoexts, which is treated as an authentication protocol by Windows, supports Microsoft SSPs including PKU2U. You can also develop or add other SSPs.
    When computers are configured to accept authentication requests by using online IDs, Negoexts.dll calls the PKU2U SSP on the computer that is used to log on. The PKU2U SSP obtains a local certificate and exchanges the policy between the peer computers. When
    validated on the peer computer, the certificate within the metadata is sent to the logon peer for validation and associates the user's certificate to a security token and the logon process completes.
    For more information about developing SSPs, see
    Custom Security Packages in the MSDN Library.
    For more information about the Negotiate extensions (Negoexts), see
    Introducing Extensions to the Negotiate Authentication Package.

  • After I import the photos into light room from a folder, the deveop module cannot be accessed? What can I do to process those photos that are on my hard driive?

    After I import the photos into light room from a folder, the deveop module cannot be accessed? What can I do to process those photos that are on my hard driive?

    If you are using a standalone version of Lightroom, you may have updated with the CC-licensed update. That will not work. If this is your situation then it will be necessary for you to uninstall Lightroom and then install an update from a different website. Assuming that you are using Lightroom 5, this is where you need to download from:
    Product updates
    After you make the change you will be able to continue from where you left off. The switchover does not affect your images or your catalog.

  • Why am i receiving an error message similar to this one when trying to download firefox?: "unable to open this internent site. The requested site is either unavailable or can not be found"

    I just received my acer aspire 1 netbook and i wanted to download firefox. I have used firefox before on my acer laptop but for some reason when I try to download it now i receive an error message similar to this one: :"unable to open this internent site. The requested site is either unavailable or can not be found" I tried downloading versions 3.6 and 4 beta and received the same message.

    That is OK.<br />
    It is one of the mirror servers that Mozilla uses
    http://www.mozilla.org/community/mirrors.html (The SUNET Archive (se))

  • Error in XI senario: The requested application,AFW,is currently unavailable

    Hi Forum,
    In a scenario, I have a BPM, which makes a synchronous call to R/3 for execution of a rfc enabled Function module, while doing so, it gives an error as a response, which i can see in the MONI:
    <b>503   Service Unavailable
    The requested application, AFW, is currently unavailable.</b>
    <i><b>The same error is also thrown when the BPM makes a asynchronous connection to a database,</b></i>
    can u help in diagnosing the problem, and help in rectifying it,
    thanks

    Hi
    Just a check with this error
    <i>8) Error: The error message 503 Service unavailable Application stopped! is displayed.
    Description:The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
    Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
    Possible Tips: Because of J2EE application com.sap.aii.af.ms.app not active
    • Try to (re)start the application using the Visual Administrator Choose Server --> Services --> Deploy --> View on Application or restart the J2EE engine
    • The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
    • Refer SAP Note 803145,807000,791655</i>

  • I forget the two security questions... How can I get them again ?

    I forget the two security questions... How can I get them again ?

    The trick is in remembering the answers.   Look at "More Like This" over there  >>>>>>>>>>

  • Whenever I open my music and select a song, my iphone immediately scrolls through other songs rapidly and then I get a pop up saying "the requested url cannot be served" and I can never listen to music

    Whenever I open my music and select a song, my iphone immediately scrolls through other songs rapidly and then I get a pop up saying "the requested url cannot be served" and I can never listen to music

    I'm in the same boat...so far no one has helped here

  • How to handle the Request more information in workflow notification

    Dear All,
    I am developing a custom workflow which has 3 different options to be handled like approve, reject and request more information. approve and reject scenarios i have done and working as expected. However I would like to know how we can capture that the notification is requested for more information so that i can design approvals according to business requirement.
    Thanks for yiur replies in advacne
    Best Regards,
    Maheshkumar.M

    Hi,
    When a user uses the request information functionality, the notification can execute a post notification function with a funcmode of QUESTION. When the question is answered, the PNF runs with a funcmode of ANSWER.
    Additionally, while the notification is awaiting an answer, the MORE_INFO_ROLE on WF_NOTIFICATIONS will be populated. When the answer has been provided, this is set to null.
    HTH,
    Matt
    WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
    Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
    Have you read the blog at http://www.workflowfaq.com/blog ?
    WorkflowFAQ support forum: http://forum.workflowfaq.com

  • STMS change systems in the request

    Hello,
    Due a administration process, I have in the Development systems transport request released with the wrong target systems.
    Of course I need import the released request to the correct target system, how i can do this?
    Because is not posible change the target systems in released requests.
    Any idea to transport the request to the correct target systems?
    thanks in advance
    Javier

    Hello,
    I have  a pretty simple solution provided both the incorrect target and correct target systems are included in the same TMS i.e are having same TMS domain. I am also assuming that the transports have not been imported into incorrect target system.
    In this scenario go to the import queue of the incorrect target system (using STMS_IMPORT). Select the block of transport requests which need to be moved to correct target. This can be done from menu using EDIT-->SELECT BLOCK.
    After this from menu choose Request>Forward>System. Give the correct target system and then these transports will also get forwarded to import buffer of correct target.
    If however the transports have been imported in incorrect target system then you need to go import history and then there again do a block selection and then forward those teansport .
    Using this you can do an enmass forwarding in one single go.
    Using the option Extras>Other Requests>Add you can add only 1 transport at a given point of time unless of course you use CATT like I do.
    Regards.
    Ruchit Khushu.

  • Plz , i forget my security information of apple id , how can i recovery it

    I forget my security information of apple store id , i already ask for recovery it , until now no thing received in my email inbox , i try many time but still no thing 

    1)  Apple ID: All about Apple ID security questions
    2)  See Here... ask to speak with the Account Security Team...
    Apple ID: Contacting Apple for help with Apple ID account security
    Or Email Here  >  Apple  Support  iTunes Store  Contact

  • Change "Bing" from the defalt search engine setting 2. How can I have snipping tool on taskbar

    Can you please tell me how I can change Bing as the default search engine setting on my browser? I have checked the internet option and account setting. It doesn't seem it can be done.

    Refer this :
    http://windows.microsoft.com/en-in/windows/change-choose-internet-explorer-search-provider#1TC=windows-7
    For snipping tool : 
    When you open the tool, on task-bar, right click and click on Pin the program on Task bar. 
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • My old Apple ID won't allow me to use the old password to log out of the cloud. I can't use the new one, either. The new Apple ID is in the iTunes and App store. But I can't change it on the cloud without logging out. Which I can't do.

    I can't use the old Apple id and Apple password on my new Iphone 6 - I can use the new ones. But I can't access the cloud in the meantime. The iTunes and App Stire has the new Apple ID, but I can't get into the settings to change it on the iCloud. It asks for the Old Apple ID and password, which doesn't work. Does anyone know how to change the old Apple ID on the iPhone in the settings for the iCloud?

    First, try the new password.  If you didn't sign out of iCloud prior to changing the primary email address of your Apple ID, this is what can cause this problem.
    Also, read this: If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support

Maybe you are looking for