Permissions error messages when migrating presets/preferences (Mac)

When the program starts it asks if I want to take the preferences from CS5.1 and migrate to 6 but when I say yes it gives me all kinds of error messages that the files are locked and when I quit it says it can't say my preferences
Would you like to migrate presets from the following versions?
Line: 212 - An error occurred when migrating the preset from...
~/Library/Preferences/Adobe Photoshop CS5.1 Settings/WorkSpaces/KD
to...
~/Library/Preferences/Adobe Photoshop CS6 Settings/WorkSpaces/KD
Line: 215 - An error occurred when migrating the preset from...KD
Administrative privileges are required to migrate these presets.
error messages - Line: 215 - An error occurred when migrating the preset from...Keith
When quiting PS - error message - Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder.

I'm sure a lot of work went into this feature, but...
Automated upgrades are always highly called-for but in practical terms almost never good to do.
Trying to save a little time in setting a brand new application up seems a little silly, given that it's not a given that all your preferences and settings from the old version will be directly applicable to the new version, and an automated transfer could copy some problems latent in your old settings to the new version.
Why not just install the new version afresh, then go through and review all the settings and make appropriate choices?  You need to get familiar with the new version anyway.
Then, if later you find out something's missing or seems different, you can always fire up the old version and note or save the settings and make the same settings in the new version.
This is more years of experience than I care to admit talking.
-Noel

Similar Messages

  • Error message when changing Mail preferences

    Whenever I change anything in the Preferences of Mail 2.0.8 even just opening the preferences and then closing them, I get an error message that says "Error Saving Preferences" " Writing your preferences to disk has failed. Your preferences may not have been saved. The permissions on ~/Library/Preferences may be wrong or your disk may be full." However, the change seems to have been made anyway as the expected new behavior occurs. The disk isn't full (haven't had it long enough!) and I don't know what to do about the preferences.
    Is there anything I can do to find out what might be wrong BEFORE something horrible happens? Tomorrow is back up day. Should I change anything before I do it?
    10.4.6
    Mac Mini Intel Core Duo   Mac OS X (10.4.6)   1 gig RAM

    This particular issue is still a mystery to me. In the rare cases when I've seen it reported, none of the suggestions that one would expect should work did.
    Open /Applications/Utilities/Terminal and type the following commands -- you can copy them here, one at a time, and paste them in Terminal to avoid having to manually type them:
    ls -ld ~/Library/Preferences
    ls -l ~/Library/Preferences/com.apple.mail.plist
    What do they say?
    If you want to try re-creating the preferences file, be sure to do it properly, i.e.:
    1. Quit Mail.
    2. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong. You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is stored.
    3. In the Finder, go to ~/Library/Preferences/. Locate the com.apple.mail.plist file and move it to the Desktop (to be deleted if this fixes the problem).
    You'll have to set up your non-Mac accounts from scratch all over again. If given the option to import existing mailboxes or something like that, don't. Just enter the account information and Mail will automagically rediscover the data in ~/Library/Mail/ when done.
    You'll also have to re-configure most of your settings in Mail > Preferences. For spam-related security reasons, the first thing you should do is go to Preferences > Viewing and disable Display remote images in HTML messages if it's enabled.
    Note: For those not familiarized with the ~/ notation, it refers to the user's home folder. You can easily locate any of the folders referred to in this post by copying the file path here, doing Go > Go to Folder in the Finder, and pasting the file path there.

  • Error message when migrating Mail.

    I've installed Yosemite on a 5 or 6 year old iMac. When I try and open mail it starts to migrate my old data and I get this error message:
    Your Mail index has been damaged. To repair it quit Mail. Mail will repair the index the next time you open Mail.
    First off, Mail is not open. When I try and open it, it starts to migrate again and I get the same error message.
    Thanks for any help.

    I recently upgraded from OS X 10.6 to 10.10. I encountered failure identical to the above post. Here was one possible workaround
    Restore a recent backup of my computer (running 10.6) to an external drive.
    Startup my computer from the external drive.
    Upgrade to 10.7. (I suppose 10.8 or 10.9 might have worked.)
    Launch "Mail" and allow it to upgrade mail from 10.6 to 10.7. Repeat this step for each user account of the computer.
    Upgrade to 10.10.
    Launch "Mail" and allow it to upgrade mail from 10.7 to 10.10. Repeat this step for each user account of the computer.
    Thoroughly test to ensure all data is present.
    Use a cloning app such as SuperDuper, clone from the external drive to the internal drive. This will erase the internal drive, so step #7 above is critical.
    Variants of this procedure are possible. For example, this variant involving Migration Assistant also seems to work.
    Restore a recent backup of my computer (running 10.6) to an external drive.
    Startup a computer from the external drive.
    Locate a computer running 10.7. (I suppose 10.8 or 10.9 might have worked.)
    Use Migration Assistant to relocate your account(s) from the 10.6 external drive to the 10.7 computer.
    Launch "Mail" and allow it to upgrade mail from 10.6 to 10.7. Repeat this step for each user account of the computer.
    Thoroughly test to ensure all data is present.
    Startup your computer in the already upgraded 10.10.
    Delete your account(s) from 10.10. This will erase data, so step #6 above is critical.
    Use Migration Assistant to relocate your account(s) from the 10.7 computer to your 10.10 computer.
    Launch "Mail" and allow it to upgrade mail form 10.7 to 10.0. Repeat this step for each user account of the computer.
    Summation: If you want to keep "Mail", don't upgrade directly from 10.6 to 10.10. Step up with something in between. Hopefully a future patch to 10.10 will make the upgrade from 10.6 easier.
    More advanced: If you are tech savvy and know where files are stored in the Library, you can just replace many steps above with a process involving just moving the needed files. These seem to be located here in 10.6 and 10.7...
    ~/Library/Mail/
    ~/Library/Mail Downloads/
    ~/Library/Preferences/com.apple.mail.*
    Where ~ references your home folder such as Macintosh HD/Users/yourname, and where * is a wildcard for any characters.
    Tip: If you launch the Mail app, stop and restart to avoid caching issues.

  • Receiving error message when printing on a Mac from Reader 10.0.2

    I have tried printing several pdf files and received this error message: "Error: pstopdffilter/pstocupsraster failed with err number 13" from an HP Officejet Pro 8500. The problem started yesterday under Reader version 9.4.2, to which I upgraded a few days ago; I further upgraded today to version 10.0.2 to see if that would help. The printer is fine and the documents all print OK when using Apple Preview and Safari. There are no print restrictions on the documents. Any ideas?

    Thanks for the reply, but there was no effect from "Reset printing system..." in System Preferences->Print & Fax. In addition, I uninstalled and reinstalled the printer software from disc - also, no effect. I've narrowed the problem down a bit by sucessfully printing to the same printer from Reader installed on another computer on my wireless network, so it does appear not to be a Reader issue. Off now to the HP website, and sorry if I created any unintended distraction to Adobe Forum members.

  • Error message when opening System Preferences

    When trying to open System Preferences, a window openstitled, “A Problem Report for System Preferences” opens with a message,"System Preferences quit unexpectedly"

    Try restarting the computer in Safe Mode this will clear some caches, one may have become corrupt. Then restart the computer while doing a SMC reset. If this still doesn't help let us know.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Roger

  • Access denied error message when switching from one Mac to another Mac

    I use LR on a laptop and a desktop, both Macs running Yosemite. I use the same external drive to store my LR photo catalogs and move it back and forth between computers. If I import pictures on one computer I get a "file access denied" when in the Develop mode on the other computer. In other words, I can only use the Develop mode on the computer where the original download from my camera occurred. I cannot find a solution and would appreciate any help. I am running the latest versions of LR and OS X. Thanks.

    Jim ~ These Apple docs may help:
    _iWeb: Modifying your site from another computer_
    iWeb: Publish to your MobileMe account from more than one computer
    And this article:
    http://iwebfaq.org/site/iWebTwocomputers.html

  • Hp photosmart C4780 error message when saving scan to MAC OS X 10.9.5

    Error msg: Error has occured saving file because it could not be written to. Check properties for the file to make sure it is not read-only. System freezes at this point.

    Hello sun4u,
    I apologize for the delay in my response time.
    I have done some more research in to the issue at hand and I have found some additional steps that we can try.
    I suggest that we go ahead and take the steps to Reset the Printing System.
    Once the Printing system has been reset, let's go a head and download the HP Printer Drivers v3.0 for OS X. 
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks again for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Error message when entering the Mac Store Content Code

    I am receiving an error message when redeeming entering the Mac Store Content Code, which I received as part of the OS X Mountain Lion Up-To-Date program. The error says that 'the code has already been used...'. It hasn't. I had just received.

    I'm having the same problem. This is a pretty big mix-up. A lot of people seem to be having the same issue.

  • What can I do to fix an old Power Mac G4 that gives an I/O error message when trying to access Entourage?

    What can I do to fix an ld Power Mac G4 that gives an I/O error message when trying to access Entourage?

    You mean when you try to just start it?
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • I am on a mac system 10.6.8. I get an "unknown error" message when I launch Illustrator 5.5

    I am on a mac system 10.6.8. I get an "unknown error" message when I launch Illustrator 5.5

    Yes, it worked recently!
    But I have just solved the problem... I threw out the preferences & restarted. Thanks!

  • I am getting an error message when installing Photoshop cs3 extended on my Mac!!!! Please help

    Error message when installing Photoshop cs3 extended on my Mac!!!! PLEASE HELP!!!

    check compatibility first, http://roaringapps.com/apps:table

  • Error message when I try to download new iTunes as follows iPhoto 7.1.5 is already installed and was not purchased from the Mac App Store

    I am trying to download new version of iTunes from App store having purchased it on my laptop.  When I try to download on my iMac I get the following message:
    Error message when I try to download new iTunes as follows:  iPhoto 7.1.5 is already installed and was not purchased from the Mac App Store - and then I am asked if I want to buy it again. I don't understand the error message and I don't want to purchase the new version again.
    Also, since upgrading to Lion my videos (from Sanyo Xacti camera) do not play on iTunes. I can only open photos.
    Thank you.

    Make a back up of your Library. Now you can update without fear.
    Regards
    TD

  • Receiving error message when trying to open microsoft word for mac or any other microsoft office for mac application

    I am receiving an error message when trying to open any application in the Office for mac suite
    Any suggestions??

    Hello
    you can try - remove and re-install microsoft office
    you can try boot in safe mode - hold COMANDE-S at start up until see you are insafe mode then restart normaly and see if you can open word
    you can try use font book too detect font conflict / problem
    you can try use office database recover / repare program as folow , first quit ALL office application then hold ALT key and launche same time entourage or outlook and and folow software optiion for verify / reconstruct database
    HTH
    Pierre

  • I have Mac OSX 10.5.8 and get java "error" message when trying to use research tool on Morningstar Java referred me to Apple but they had no update.Any ideas? thanks.e

    I have a imac OSX 10.5.8 and get a java "error" message when trying to use a research tool on Morningstar.Java referred me to Apple but they had no updates. Any ideas? thanks.

    Well I solved my problem.
    What still doesn't make sense though is that dragging iTune audio files directly on to the iTunes application icon gave me the error message... which is why I originally discounted it as being a potential link problem. If I had been able to get files to open normally (i.e. without an error message) I would have known it was a simple link problem. Strange.
    Anyway... relinking my folder of audio files did the trick.
    If you don't already know how here are the steps...
    iTunes > Preferences > Advanced > click on the "Change" button and browse to the folder that contains all of your iTunes audio files... that's it.

  • Error message when I try to copy new files (images, documents) to mac from flash drive/SD card

    I am recieving an error message when I try to copy new files (images, documents) to mac from flash drive/SD card. The message is saying "operation cannot be completed because an item already exists with that name." They are brand new therefore not the same name? I cannot even put them in a brand new folder...  How can I fix this?
    Please help me!

    You don't need to recover the system.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Drag or copy — do not type — the following line into the Terminal window, then press the space bar:
    dot_clean -m
    Switch to the Finder and drag the icon of the flash drive into the Terminal window. Some text will appear after what you entered. Press return.
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear. Then quit Terminal and try the copy again.

Maybe you are looking for

  • PGP error in PI 7.4 - BouncyCastle Provider not found

    Hi , I am working on PGP encryption in SAP PI7.4 . I have followed below link : PGPEncryption Module: A Simple How to Guide Using PGP in Process Integration But while doing end to end scenario it is givingg error : Exception caught by adapter framewo

  • Oas 4.0.8.2

    Hi, AM trying to download oas 4.0.8.2 from technet.oracle.com/software.... But i keep getting an error that there is no such file! Has Oracle removed the files from that location? Any suggestions from where i can get a working version of oas 4.0.8.2?

  • Module Pool Programming adding line items.

    Hi, I am Doing Module Pool Programming in which I Should add line items and if the user gives the save button the data wil be saved in  tables and SAP should generate one unique number. Please give me inputs how to generate unique number and add n nu

  • Couldn't find the answer to this in any other forum about the MacProtector Malware.  Please HELP!!!

    I clicked on a link while reading a story about vegetarian athletes today and the MacProtector malware downloaded to my computer.  I DID NOT install the application when the installer opened.  I immediately started searching for support on what to do

  • OSX Yosemite Wifi FIX!!

    I found a way to fix the wifi issue on my iMac which i upgraded from maverick to Yosemite OSX. I got fed up with all the fixes that didn't fix the problem so I opened app store and re-downloaded Mavericks.. I noticed that for two hours my wifi didn't