Permissions error when starting archivelog recovery during active dup
I am doing an active duplication from one linux server to another. The ASM system on the auxiliary server has two data groups. I just ran this same job to create a database to one of the datagroups a few days ago - no problem. Now, running the same job I got an error once the duplication got to the recovery step. The archivelogs had been laid down and do exist on the auxiliary server's asm diskgroup.
Here is the job I am running from the target(source) server:
$ORACLE_HOME/bin/rman <<EOF>> stagenew-2011-04-06.out
connect auxiliary sys/abcdefg@stagenew
connect target sys/abcdefg@xcede
run
allocate channel c1 device type DISK;
allocate channel c2 device type DISK;
allocate channel c3 device type DISK;
allocate channel c4 device type DISK;
allocate auxiliary channel x5 device type DISK;
allocate auxiliary channel x6 device type DISK;
allocate auxiliary channel x7 device type DISK;
allocate auxiliary channel x8 device type DISK;
duplicate target database to stage from active database NOFILENAMECHECK;
EOF
echo "finished"
exit
And here is the error:
archived log for thread 1 with sequence 181831 is already on disk as file +DATA01/stage/archivelog/2011_04_05/thread_1_seq_181831.1615.747682059
archived log for thread 1 with sequence 181832 is already on disk as file +DATA01/stage/archivelog/2011_04_05/thread_1_seq_181832.1614.747682059
archived log for thread 1 with sequence 181833 is already on disk as file +DATA01/stage/archivelog/2011_04_05/thread_1_seq_181833.1645.747682067
archived log file name=+DATA01/stage/archivelog/2011_04_05/thread_1_seq_181816.914.747681987 thread=1 sequence=181816
released channel: c1
released channel: c2
released channel: c3
released channel: c4
released channel: x5
released channel: x6
released channel: x7
released channel: x8
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 04/05/2011 17:31:24
RMAN-03015: error occurred in stored script Memory Script
RMAN-11003: failure during parse/execution of SQL statement: alter database recover logfile '+DATA01/stage/archivelog/2011_04_05/thread_1_seq_181816.914.747681987'
ORA-00308: cannot open archived log '+DATA01/stage/archivelog/2011_04_05/thread_1_seq_181816.914.747681987'
ORA-17503: ksfdopn:2 Failed to open file +DATA01/stage/archivelog/2011_04_05/thread_1_seq_181816.914.747681987
ORA-15055: unable to connect to ASM instance
ORA-01031: insufficient privileges
RMAN>
Recovery Manager complete.
******* The only difference besides the name of the database being created between the duplication that was successful and this one is that the other created the database on one diskgroup and this job is using the other but as far as I can tell there is no difference between the two other than name. As I said earlier, the logs are there. Here they are:
ASMCMD> cd data01/stage/archivelog
ASMCMD> cd 2011_04_05/
ASMCMD> ls
thread_1_seq_181816.914.747681987
thread_1_seq_181817.789.747681987
thread_1_seq_181818.1637.747681987
thread_1_seq_181819.1626.747681987
thread_1_seq_181820.1622.747681995
thread_1_seq_181821.1621.747681995
thread_1_seq_181822.1620.747682009
thread_1_seq_181823.1619.747682013
thread_1_seq_181824.1612.747682015
thread_1_seq_181825.1613.747682029
thread_1_seq_181826.1617.747682029
thread_1_seq_181827.1618.747682029
thread_1_seq_181828.1611.747682037
thread_1_seq_181829.1616.747682051
thread_1_seq_181830.1610.747682053
thread_1_seq_181831.1615.747682059
thread_1_seq_181832.1614.747682059
thread_1_seq_181833.1645.747682067
So I would think that recovery would be running as 'SYS' and that 'SYS' does not have the permissions it needs....but ran same job for different db and no such issue. Any thoughts?
Have you created password file and check parameter remote_login_passwordfile for asm and database home on auxiliary node.
or
run the command from the auxiliary node
Similar Messages
-
Error when starting parser: timeout during allocate / CPIC-CALL:'TfSAPCMRC'
Hello experts.
When I try to preview or refresh a Crystal Report document built on a BEx query I get the following error msg:
Database connector error: BAPI Error #0. Error when starting parser: timeout during allocate / CPIC-CALL: 'TfSAPCMRCV'.
We have done as suggested in "SAP Note 1032461 - MDX parser does not start", but without success.
This is what we've tried so far:
replaced the file "librfc32.dll" (in C:\Windows\System32 and C:\Windows\SysWOW64) with the new version mentioned in Note 413708.
tested the connection in SM59 - non successful
tested the report query with transaction MDXTEST - non successful
tried to start the mdxparser manually on server - non succesful, error msg: "The application failed to initialise.."
We have the following config:
MS server 2003 SP2 x64 ed.
SAP logon 7.20
MS SQL server 2005
CR 2008
new librfc32.dll version 7200.1.39.6461
Any ideas on what to try next would be highly appreciated!
Cheers, IngAHi Ingo.
We have only one application server.
I registered the new version of the file C:\windows\SysWOW64\librfc32.dll with regsvr32.exe successfully. I've also tried to copy the new file to the same directory as the mdxsvr.exe-file is located, but it made no difference.
Should I remove all other copies of librfc32.dll and only keep the one in folder C:\Windows\SysWOW64, or maybe register them all with regsvr32.exe?
--IngA
Edited by: Ingeborg Andreassen on Nov 5, 2010 10:36 AM -
Error when starting WD-Application without active scripting
Hello together,
at the moment I am writing a thesis about web dynpro and time is nearly gone...
In the article:
The Basic Facts About Web Dynpro - What Does It Do and How Does It Work?
by Dr. Peter Tillert,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/91b8c890-0201-0010-c787-be96f6fade89
I´ve read about server-side rendering and client-side rendering ( text under figure 6 ).
Now I´ve got the following problem:
Usually I use IE7 for testing my WD-Applications with enabled active scripting.
Now I thought I disable active scripting on my client in order to test server-side rendering
of plain html...
I only get the error: WebDynpro Exception: Client Does Not Support JavaScript
What´s wrong? I expected an other result... Thought WD is sooo flexible ???
Many greetings,
OliverThe article that you have chosen is rather old and represented some of the design goals of Web Dynpro back in 2004 before the project was completed. I see other items in the article (like the Dynpro/Web Dynpro integration for ABAP) that were dropped before the final release of the product as well.
I believe that quote you focused in on was:
"While smart browsers (Internet Explorer as of version 5.5 and Netscape Navigator as of version 7.0) can run our client-side JavaScript, future versions of the Web Dynpro runtime will send server-side generated HTML without any scripting to every other browser."
What you need to understand is that the idea of having a clear separation between the CSF and the SSF was an original design aspect of Web Dynpro that was elimated before the final product was delivered to market. Part of the reasoning is that mainstream browser usage advanced to the point where the need to support non-JavaScript browsers was largely a moot point by the time Web Dynpro was released. Therefore producing a rendering engine that has no scripting no longer had much value. So deactiving scripting support in Web Dynpro today, does result in the error message that you received by design. You can always check the latest supported browser versions for Web Dynpro by viewing the Platform Availability Matrix on the Service Marketplace.
Using certain Application and URL parameters there certain features of the client side scritping that can be turned off:
http://help.sap.com/saphelp_nw70/helpdata/EN/7b/fb57412df8091de10000000a155106/frameset.htm
For instance you can deactivate the Delta Rendering (DOM Infusion of UI elements).
Web Dynpro rendering is still abstracted and very flexible. Today we focus this multi-client rendering approach on vastly different rendering technologies. We can output to the HTML with JavaScript and AJAX, to Adobe Flex and to the NetWeaver Business Client (.Net 3.0 runtime). Here are some screenshots that show the same WD application running in these three very different environments.
NWBC:
http://www.flickr.com/photos/tjung/2685619882/
Flex:
http://www.flickr.com/photos/tjung/2684804211/
HTML/JavaScript:
http://www.flickr.com/photos/tjung/2685619854/ -
Hi
We are having SRM5.0.
Trying to create Contract. Workflow Without approval of contract(WS1400086)is activated and start conditions also no workflow activated.
Contract is created and getting message Contract created.
But when tried to release the contract it shows "Awaiting approval".
In Workflow log (SWI1)it shows error."Error when starting work item xxxx".
What could be the reason. Please let me know the solution if anyone of you come across such error.
Thanks in advance
JagadishMasa
It is maintained as General task already.
It seems the workflow task WS14000085 does not have definition.
When checked in SWDD for the above teask there are no steps defined for that workflow.
SAP says that we need to define and action for workflow WS14000085.
But what is the procedure to define the workflow.
I presume this is the standard workflow and it should be defined by default when it comes along with the SRM package.
Anyone of you know how to define the workflow and activate the same?
Regards
Jagadish -
Error when starting Mercury Quicke Test Professional
Hello,
I am executing the QTP scripts through eCATT. During execution I got an error ' Error when starting Mercury Quick Test Professional'.
Does anybody knows how to resove this?
Thanks,
MahanteshHi,
This is a common problem if scripting is disabled either on server or on ur sapgui client.
for enabling at server got rz11 tcode and enter sapgui/user_scripting profile and enable scripting there.
Refer my sdn weblogs which shows minimum config for QTP and ECATT and also how to create and run the scripts.
/people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
/people/community.user/blog/2007/01/15/integrating-ecatt-mercury-qtp-part-2
Please reward points. -
Error when starting configtool.
The installation is successful. But I am getting the following error when starting configtool:
PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
com.sap.engine.frame.core.configuration.ConfigurationException: Error while conn
ecting to DB.
This is not during the installation as given in some of the other posts. The installation is successful and I am able to start and run the J2EE engine and the Portal. This error occurs when I try to start the config tool.
Any help would be appreciated. Thanks.Hi Arul,
Have you checked the parameters that the configtool is using to connect? (don't use default settings)
What database is this on? In the case that it is oracle can you TNS ping the db? The listener is running?
Regards
Daniel -
Security Error when starting the server - WPLS 7.0
Security Error when starting the server - WPLS 7.0
what may be the reason ...
console :
BUILD SUCCESSFUL
Total time: 3 seconds
Starting WebLogic Server...
<May 30, 2005 4:22:15 PM IST> <Notice> <Management> <140005> <Loading configuration C:\cpDomain\.\config.xml>
<May 30, 2005 4:22:18 PM IST> <Info> <Logging> <000000> <FileLogger Opened at C:\cpDomain\portalServer\weblogi
c.portalServer.log>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090516> <The RoleMapper provider has preexisting LDAP data.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090516> <The Authorizer provider has preexisting LDAP data.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090143> <The weblogic keystore provider DefaultKeyStore in re
alm cprealm cannot be used for private keys because its configured private key keystore file wlDefaultKeyStore
.jks does not exist.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090142> <The weblogic keystore provider DefaultKeyStore in re
alm cprealm cannot be used for trusted (root) CAs because its trusted (root) CA keystore was not configured.>
<May 30, 2005 4:22:21 PM IST> <Notice> <Security> <090082> <Security initializing using realm cprealm.>
<May 30, 2005 4:22:21 PM IST> <Critical> <WebLogicServer> <000364> <Server failed during initialization. Excep
tion:java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
<May 30, 2005 4:22:21 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to initialize the server: Fatal in
itialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
C:\cpDomain\bin>
Thanks
Thanks & Regards,
Siva VP,
[email protected]Looks like you cannot connect to LDAP. Are you configured correctly?
-
Multiple condition : Error when starting a SWITCH branch
Hi,
In our Z Leave Workflow,I am facing the errors listed below.
Error when starting a SWITCH branch
Error during CASE evaluation in SWITCH mode for node 0000000158
Operator 'EQ': The value of the left operand cannot be determined
Error in the evaluation of expression '<???>&REQ.STATUS&' for item '1'
Unable to determine the value of component ''
It gives error in Multiple condition Request Approved? which is similar to standard WF12300111 node number 158 (u can say copy of WF12300111
This multiple condition works in some scenario But it gives dump at other scenario .
I have checked the value of REQ.STATUS in runtime. It populates the value as 'POSTED' in runtime,
Please suggest if any solution on this.
Regards,
KalpeshHi There was some problem with task which was comprising class CL_PT_REQ_WF_ATTRIBS and APPROVE method. This method is to change the status of particular leave workitem.After running this particular task ,the status was not changin instantly.This method locks particular workitem and was releasing the workitem once the WF gets completed.Hence I was getting REQ.STATUS as sent.
I have changed that task with following code in new task...
DATA:
REQUEST_ID TYPE PTARQ_DEDUCTION-REQUEST_ID,
request TYPE REF TO if_pt_req_request,
new_status TYPE tim_req_status.
SWC_GET_ELEMENT CONTAINER 'REQUEST_ID' REQUEST_ID.
CALL FUNCTION 'ENQUEUE_EPTREQ'
EXPORTING
mode_ptreq_header = 'E'
request_id = request_id
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE w058(hrtim_abs_req) WITH request_id.
ELSE.
CALL METHOD ca_pt_req_header=>agent->get_request
EXPORTING
im_request_id = request_id
IMPORTING
ex_request = request.
execute state transition
CALL METHOD request->initiate_state_transition
EXPORTING
im_transfer_event = 'APPROVE'
IMPORTING
ex_new_status = new_status.
COMMIT WORK.
CALL FUNCTION 'DEQUEUE_EPTREQ'
EXPORTING
request_id = request_id.
ENDIF.
This will create new status for leave item during WF processing.
Apart from that also added Wait for 2 minutes after that task....
Thanks for your help.
Regards,
Kalpesh -
JVM Initialization Error when Starting the Second Managed Server
Hi,
I am getting the below error when starting the 2nd Managed server on Solaris X86 machine.
starting weblogic with Java version:
java version "1.5.0_17"
Java(TM) Platform, Standard Edition for Business (build 1.5.0_17-b04)
Java HotSpot(TM) Client VM (build 1.5.0_17-b04, mixed mode, sharing)
Starting WLS with line:
/usr/jdk/instances/jdk1.5.0/bin/java -client -Xms256m -Xmx512m -XX:CompileThre shold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Xverify:none -da -Dplatform .home=/beafiler/weblogic10g/bea/wlserver_10.0 -Dwls.home=/beafiler/weblogic10g/b ea/wlserver_10.0/server -Dweblogic.home=/beafiler/weblogic10g/bea/wlserver_10.0/ server -Dwli.home= -Dweblogic.management.discover=false -Dweblogic.management.s erver=http://test_admin:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=false - Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/beafiler/weblogic10g/bea/patch_wss 110/profiles/default/sysext_manifest_classpath:/beafiler/weblogic10g/bea/patch_w lw1021/profiles/default/sysext_manifest_classpath:/beafiler/weblogic10g/bea/patc h_wls1002/profiles/default/sysext_manifest_classpath:/beafiler/weblogic10g/bea/p atch_cie640/profiles/default/sysext_manifest_classpath -Dweblogic.security.provi ders.authentication.LDAPDelegatePoolSize=50 -Dweblogic.Name=wls_test2 -Djava.sec urity.policy=/beafiler/weblogic10g/bea/wlserver_10.0/server/lib/weblogic.policy weblogic.Server
Error occurred during initialization of VM
Could not reserve enough space for object heap
Can any one please help me troubleshoot this?
Edited by: user4877326 on Jul 13, 2010 1:33 PMHi P.k,
The table QRTZ92_TRIGGERS is there in the database.But while trying to run this command (UPDATE QRTZ92_TRIGGERS set NEXT_FIRE_TIME=1 where NEXT_FIRE_TIME < 0)in database i am getting the table or view does not exist.
What is GTC resource?
OIM version - 11.1.1.5.0.
-Deena. -
"Not an executable or is a link" errors when starting Messaging Server
"Not an executable or is a link" errors when starting Messaging Server
<P>
If Calendar Server 3.x has been installed to the same server root
as Messaging server, it is possible that the command 'NscpMail start'
to restart the server will return a string of errors:
# /etc/NscpMail start
19971207145610:Dispatch:Notification:Local Module
(Account-Handler) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Account-Manager) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(AutoReply-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Configuration-Manager) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Error-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Mailbox-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Program-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Router) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(UNIX-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(Finger-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(IMAP4-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(POP3-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(SMTP-Accept) is not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
The Calendar server 3.x installation may have changed the permissions
on [server-root]/bin directory from 755 to 750. Simply issue the
command (as root) 'chmod 755 [server-root]/bin' and then start
the server with the 'NscpMail start' command, and it should start
without a problem."Not an executable or is a link" errors when starting Messaging Server
<P>
If Calendar Server 3.x has been installed to the same server root
as Messaging server, it is possible that the command 'NscpMail start'
to restart the server will return a string of errors:
# /etc/NscpMail start
19971207145610:Dispatch:Notification:Local Module
(Account-Handler) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Account-Manager) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(AutoReply-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Configuration-Manager) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Error-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Mailbox-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Program-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Router) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(UNIX-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(Finger-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(IMAP4-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(POP3-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(SMTP-Accept) is not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
The Calendar server 3.x installation may have changed the permissions
on [server-root]/bin directory from 755 to 750. Simply issue the
command (as root) 'chmod 755 [server-root]/bin' and then start
the server with the 'NscpMail start' command, and it should start
without a problem. -
Getting error while starting managed recovery
Hi,
I am getting error while starting managed recovery.Please suggest.
Please find below error log
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION
Attempt to start background Managed Standby Recovery process (OTP3)
Wed Jun 23 19:24:10 2010
MRP0 started with pid=50, OS id=3350
MRP0: Background Managed Standby Recovery process started (OTP3)
Fast Parallel Media Recovery enabled
Managed Standby Recovery not using Real Time Apply
Warning: Recovery target destination is in a sibling branch
of the controlfile checkpoint. Recovery will only recover
changes to datafiles.
Datafile 1 (ckpscn 296765005228) is orphaned on incarnation#=1
MRP0: Background Media Recovery terminated with error 19909
Errors in file /ora/app/oracle/admin/OTP3/diag/rdbms/otp3/OTP3/trace/OTP3_mrp0_3350.trc:
ORA-19909: datafile 1 belongs to an orphan incarnation
ORA-01110: data file 1: '/ora_ots_gdb1/oradata/OTP3/datafile/o1_mf_SYSTEM_REORG1_.dbf'
Errors in file /ora/app/oracle/admin/OTP3/diag/rdbms/otp3/OTP3/trace/OTP3_mrp0_3350.trc:
ORA-19909: datafile 1 belongs to an orphan incarnation
ORA-01110: data file 1: '/ora_ots_gdb1/oradata/OTP3/datafile/o1_mf_SYSTEM_REORG1_.dbf'
MRP0: Background Media Recovery process shutdown (OTP3)
Completed: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSIONHi,
The standby database has been activated previously but since then reverted back into its standby role. Prior to the
RMAN duplicate operation the "alter system reset control_files scope=spfile sid='*';" has not been executed (i.e. the
control files have not been overwritten).
check the incarnation on both the sides i.e primary & standby
list incarnation of database;
RMAN> reset database to incarnation 2;
database reset to incarnation 2
RMAN> exit
hope you can solve by restting the incarnation.
Thanks -
How do you grant permission for home sharing and authorizing? My mac did home share, but now says, "The required directory was not found or has a permissions error", when I try to authorize.
OK, I just got off of the phone with Apple and still no joy. They had me try a few things that did not work, then told me to Archive and Install, which did not either. Anyway, thanks for the additional help very note worthy, but still no joy. Also an email to iTunes Support took me here
http://docs.info.apple.com/article.html?artnum=93061
I have a Users/Shared folder but since the files we are talking about are invisible, I can see how it is structured.
And by the way I tried this one
http://discussions.apple.com/message.jspa?messageID=3577004#3577004
and it did not work. However, when I install a fresh copy of Tiger on the external it did authorize the computer and was able to play the downloads. But coping the invisible file to my boot drive was not successful. But , like I said the music did play when I started up from the external. So I guess that may be my only solution, unless someone can tell what the correct directory is and where it for iTunes downloads. -
Error when starting a SWITCH branch (8987)
Hi,
I am testing my workflow which starting with a multiple condition (switch). The workflow process is stopped with the error:
Error when starting a SWITCH branch (8987).
The workflow check shows no warnings or errors. What could be the problem?
Thank you in advance.
/ElvezCheck the workflow container (of the started workflow instance) and see if you spot a problem with one of the container objects used in your switch conditions.
-
Error when Starting WAD in New System
Hi
We are getting the following error when starting the Web Application Designer.
"Component 'BexWEbApplicationDesigner': available version 64 , Version 154 required bfore you can continue you have to run the front end "
I understand that we are missing some fornt end patch.Where can i get this patch.
Can i get this patch or version in SAPservice market place.
Please help me
How to correct this error.Any thoughts are welcome...
Regards
Pravallika
Message was edited by:
Pravallika ThammineniHi Pravallika,
Do you already have an answer to this problem. I am experiencing the same problem at the moment...
Best Regards
Marcel -
Error when starting Java(TM) ME Platform SDK 3.0
hey guys, I get this error when starting Java(TM) ME Platform SDK 3.0. When I installed it it installed 'successfully' and then I double clicked the file on the desktop (I'm using Windows Vista 32bit Home premium) and it gave me the following error when saying 'Starting Modules':-------------------------------------------------------------------------------
Log Session: Sunday, February 13, 2011 1:52:25 PM GMT
System Info: Product Version = Java(TM) ME Platform SDK 3.0
Operating System = Windows Vista version 6.0 running on x86
Java; VM; Vendor = 1.6.0_23; Java HotSpot(TM) Client VM 19.0-b09; Sun Microsystems Inc.
Runtime = Java(TM) SE Runtime Environment 1.6.0_23-b05
Java Home = C:\Program Files\Java\jdk1.6.0_23\jre
System Locale; Encoding = en_GB (cdctoolbar); Cp1252
Home Directory = C:\Users\Molten Ice
Current Directory = C:\Program Files\Java\Java_ME_platform_SDK_3.0\bin
User Directory = C:\Users\Molten Ice\javame-sdk\toolbar\3.0
Installation = C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\javamesdk1
C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\ide10
C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\java2
C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\mobility8
C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\profiler2
C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9
Boot & Ext. Classpath = C:\Program Files\Java\jdk1.6.0_23\jre\lib\resources.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\rt.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\sunrsasign.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\jsse.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\jce.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\charsets.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\modules\jdk.boot.jar;C:\Program Files\Java\jdk1.6.0_23\jre\classes;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\dnsns.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\localedata.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\sunjce_provider.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\sunmscapi.jar;C:\Program Files\Java\jdk1.6.0_23\jre\lib\ext\sunpkcs11.jar
Application Classpath = C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\lib\boot.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\lib\org-openide-modules.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\lib\org-openide-util.jar;C:\Program Files\Java\jdk1.6.0_23\lib\dt.jar;C:\Program Files\Java\jdk1.6.0_23\lib\tools.jar
Startup Classpath = C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\core\core.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\platform9\core\org-openide-filesystems.jar;C:\Program Files\Java\Java_ME_platform_SDK_3.0\toolbar\javamesdk1\core\locale\core_cdctoolbar.jar
WARNING [org.netbeans.core.projects.cache]: Inefficient to include an empty layer in a module: jar:file:/C:/Program%20Files/Java/Java_ME_platform_SDK_3.0/toolbar/javamesdk1/modules/org-netbeans-modules-javame-common.jar!/org/netbeans/modules/javame/common/resources/layer.xml
WARNING [org.netbeans.core.projects.cache]: Inefficient to include an empty layer in a module: jar:file:/C:/Program%20Files/Java/Java_ME_platform_SDK_3.0/toolbar/javamesdk1/modules/org-netbeans-modules-e2e.jar!/org/netbeans/modules/e2e/layer.xml
WARNING [org.openide.filesystems.Ordering]: Not all children in Services/MIMEResolver/ marked with the position attribute: [org-netbeans-modules-javame-netmon-data-NetMonDataResolver.xml], but some are: [org-netbeans-modules-java-mime-resolver.xml, org-apache-tools-ant-module-mime-resolver.xml, org-netbeans-modules-editor-settings-storage-mime-resolver.xml, org-netbeans-modules-url-mime-resolver.xml, org-netbeans-modules-pdf-mime-resolver.xml, org-netbeans-modules-jar-mime-resolver.xml, org-netbeans-modules-editor-codetemplates-mime-resolver.xml]
WARNING [org.openide.filesystems.Ordering]: Not all children in Services/MIMEResolver/ marked with the position attribute: [org-netbeans-modules-javame-netmon-data-NetMonDataResolver.xml], but some are: [org-netbeans-modules-java-mime-resolver.xml, org-apache-tools-ant-module-mime-resolver.xml, org-netbeans-modules-editor-settings-storage-mime-resolver.xml, org-netbeans-modules-url-mime-resolver.xml, org-netbeans-modules-pdf-mime-resolver.xml, org-netbeans-modules-jar-mime-resolver.xml, org-netbeans-modules-editor-codetemplates-mime-resolver.xml]
[ 0] INFO - ootstrap.PropertyEditorManager - Registering custom property editors
[ 117] INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
[ 217] INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
[ 317] INFO - bootstrap.ObjectGraphProcessor - Calculating order...
[ 417] INFO - bootstrap.ObjectGraphProcessor - Calculated order
[ 523] INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
[ 627] INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
[ 732] INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
[ 832] INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
[ 932] INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[ 1032] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 2166] WARN - mpl.ObjectServerConnectionImpl - Remote object server is not running at service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 2268] INFO - l.process.GenericProcessRunner - Starting process: C:\Program Files\Java\Java_ME_platform_SDK_3.0/bin/device-manager.exe
[ 3384] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 5476] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 7576] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 9677] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 11777] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 13877] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 15977] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 18077] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 20177] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 22277] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 23379] ERROR - un.jme.toolkit.bootstrap.Batch - Problem calling start() on DeviceManagerConnection
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.jme.toolkit.bootstrap.Batch.invoke(Unknown Source)
at com.sun.jme.toolkit.bootstrap.Batch.tryInvoke(Unknown Source)
at com.sun.jme.toolkit.bootstrap.Batch.startObjects(Unknown Source)
at org.netbeans.modules.javame.common.container.Module.start(Module.java:21)
at org.netbeans.modules.javame.common.container.ContainerSupport.startModule(ContainerSupport.java:67)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManagerConnection(DevicemanagerHelper.java:41)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.ensureConnected(DevicemanagerHelper.java:48)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:84)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:292)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:63)
at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:421)
at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:342)
at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
at org.netbeans.core.startup.Main.start(Main.java:312)
at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.io.IOException: Failed to retrieve RMIServer stub: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect]
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
... 24 more
Caused by: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect]
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1886)
at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1856)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
... 27 more
Caused by: java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
... 32 more
Caused by: java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket.<init>(Socket.java:375)
at java.net.Socket.<init>(Socket.java:189)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
... 37 more
SEVERE [org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper]: Cannot connect to device manager
java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket.<init>(Socket.java:375)
at java.net.Socket.<init>(Socket.java:189)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
Caused: java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
Caused: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect]
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1886)
at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1856)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
Caused: java.io.IOException: Failed to retrieve RMIServer stub
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
Caused: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.jme.toolkit.bootstrap.Batch.invoke(Unknown Source)
at com.sun.jme.toolkit.bootstrap.Batch.tryInvoke(Unknown Source)
at com.sun.jme.toolkit.bootstrap.Batch.startObjects(Unknown Source)
at org.netbeans.modules.javame.common.container.Module.start(Module.java:21)
at org.netbeans.modules.javame.common.container.ContainerSupport.startModule(ContainerSupport.java:67)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManagerConnection(DevicemanagerHelper.java:41)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.ensureConnected(DevicemanagerHelper.java:48)
[catch] at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:84)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:292)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:63)
at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:421)
at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:342)
at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
at org.netbeans.core.startup.Main.start(Main.java:312)
at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
at java.lang.Thread.run(Thread.java:662)
[ 23598] INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
[ 23698] INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
[ 23798] INFO - bootstrap.ObjectGraphProcessor - Calculating order...
[ 23898] INFO - bootstrap.ObjectGraphProcessor - Calculated order
[ 23998] INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
[ 24098] INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
[ 24198] INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
[ 24298] INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
[ 24398] INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[ 24498] INFO - un.jme.toolkit.bootstrap.Batch - Objects started
[ 24600] INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
[ 24700] INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
[ 24800] INFO - bootstrap.ObjectGraphProcessor - Calculating order...
[ 24900] INFO - bootstrap.ObjectGraphProcessor - Calculated order
[ 25000] INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
[ 25100] INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
[ 25202] INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
[ 25302] INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
[ 25402] INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[ 25502] INFO - un.jme.toolkit.bootstrap.Batch - Objects started
[ 25602] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 26699] WARN - mpl.ObjectServerConnectionImpl - Remote object server is not running at service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 26799] INFO - l.process.GenericProcessRunner - Starting process: C:\Program Files\Java\Java_ME_platform_SDK_3.0/bin/device-manager.exe
[ 27914] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 30005] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 32106] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 34206] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 36306] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 38406] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 40506] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 42607] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 44706] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
[ 46806] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://127.0.0.1:1999/device-manager
SEVERE [org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper]: Cannot connect to device manager
java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket.<init>(Socket.java:375)
at java.net.Socket.<init>(Socket.java:189)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
Caused: java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect
at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
Caused: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused: connect]
at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1886)
at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1856)
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
Caused: java.io.IOException: Failed to retrieve RMIServer stub
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.lookupMBean(Unknown Source)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.findObject(Unknown Source)
[catch] at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.openConnection(DevicemanagerHelper.java:53)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:86)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:292)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:63)
at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:421)
at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:342)
at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
at org.netbeans.core.startup.Main.start(Main.java:312)
at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
at java.lang.Thread.run(Thread.java:662)
[ 48018] INFO - bootstrap.ObjectGraphProcessor - Consolidating dependencies...
[ 48118] INFO - bootstrap.ObjectGraphProcessor - Consolidated dependencies...
[ 48218] INFO - bootstrap.ObjectGraphProcessor - Calculating order...
[ 48318] INFO - bootstrap.ObjectGraphProcessor - Calculated order
[ 48418] INFO - un.jme.toolkit.bootstrap.Batch - Initializing objects...
[ 48518] INFO - un.jme.toolkit.bootstrap.Batch - Applying I18N
[ 48618] INFO - un.jme.toolkit.bootstrap.Batch - Initialized objects
[ 48718] INFO - un.jme.toolkit.bootstrap.Batch - Calling create() methods...
[ 48818] INFO - un.jme.toolkit.bootstrap.Batch - Calling start() methods...
[ 48918] INFO - un.jme.toolkit.bootstrap.Batch - Objects started
[ 49018] INFO - bootstrap.ObjectGraphPI did install Nokia's SDK with NetBeans and this works perfectly.
I went through with everything recommended here: http://blogs.sun.com/javamesdk/entry/first_aid_when_emulator_doesn
But nothing worked.
Any help appreciated!
Thanks.Note: This thread was originally posted in the [Sun Java Wireless Toolkit|http://forums.sun.com/forum.jspa?forumID=82] forum, but moved to this forum for closer topic alignment.
Maybe you are looking for
-
Trying to add a new entry to SUN LDAP
Hey im trying the following code to add a new user to a group using VB.NET but no success yet Dim de As New DirectoryEntry("LDAP://www.m1steveldap.com:389/ou=people,dc=steveldap,dc=com,o=broker") de.Username = "cn=manager" de.Password
-
Discs not compatible anymore in my DVD player
Hello, I recently bought a mac pro with a pioneer 112 in. Now when I create a DVD using Encore they come up as incompatible in my Panasonic DMR-E55 dvd recorder. Never had this problem with my previous Pioneer 105 in a PC and am using the same discs.
-
How do I Maximize all the Windows
Hello, Greetings! How do I Maximize all the opened windows in CS2
-
Hi - I know that you can get a "cannot execute" error when trying to run a SPARC binary on an x86 system or vice versa. However, we have a customer reporting this error when running our SPARC binary on his SPARC system. Both systems are running Solar
-
Not sure about derviatives, file types, and export for lightroom
hello: I am a new LR user and new to the DAM process. I am confused about something that is probably basic and fundamental to this process. My computer setup is two internal drives (working drive and a photo archive), as well as external backup and b