Permissions Issue on my MacBook Pro (early) 2011

I am having the following issue on my MacBook Pro (early) 2011 -
Verifying permissions for “Macintosh HD”
ACL found but not expected on “private/var/db/launchd.db/com.apple.launchd”
Permissions verification complete
Repairing permissions for “Macintosh HD”
ACL found but not expected on “private/var/db/launchd.db/com.apple.launchd”
Repaired “private/var/db/launchd.db/com.apple.launchd”
Permissions repair complete
Verifying permissions for “Macintosh HD”
ACL found but not expected on “private/var/db/launchd.db/com.apple.launchd”
Permissions verification complete
- As you can see I have Verified the Permissions and attempted to repair them; only to see the same issue pop up again.
Does anyone know how to fix this situation?
Thanks

Ignore them; they don't represent problems, and running repair permissions more than once per incident is a waste of time.
(73721)

Similar Messages

Hello everyone! I am having issues with my MacBook Pro early 2011 13 in. When I boot up it starts to boot up and never finishes. The screen just continues to have the apple and spinning circle on it. Any recommendations?

When restarting my computer the screen is freezing on the apple and spinning icon. It never finishes booting. Anyone know how to fix this?

Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Macbook Pro Early 2011 having issues

Hi all
I hope this message finds you all well.
Sorry that my first post is one begging for help but with a gig 3 weeks away i am bricking it due to the fact that my macbook pro, early 2011 has been playing up of late. It first started having problems when the L shift key became stuck, not physically but after some investigation on here I used Karabiner software to ascertain the issue and disable the key. However since then the computer hasnt run properly at all.
I have tried disk repair and so forth, also run Avast virus check but the issues still persist.
I run Traktor DJ software and for no reason the macbook has started glitching, spinning wheel of doom comes and everything slows down. I can't run simultaneous programmes and certainly can't run my Arkaos Grand VJ software at all which isn't good when we have a big gig in 3 weeks time.
I have run the Etrecheck as shown below but I dont know what to make of it?!
Can someone please give me some advice as I am stuck and cant rely on the laptop for the gig which will throw a real spanner in the works.
Problem description:
Runs slow, spinning wheel frequently, cannot run arkaos software, tractor software glitches regularly, L shift is stuck on (presently disabled using Karabiner software
EtreCheck version: 2.0.4 (89)
Report generated 16 October 2014 14:01:30 BST
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2 GHz Intel Core i7 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1440 x 900
AMD Radeon HD 6490M - VRAM: 256 MB
System Software: ℹ️
OS X 10.9.4 (13E28) - Uptime: 9 days 1:39:24
Disk Information: ℹ️
ST500LM012 HN-M500MBB disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (104.69 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R   UJ-898
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
JMicron Samsung S2 Portable 1 TB
S.M.A.R.T. Status: Verified
J-Unit (disk2s1) /Volumes/J-Unit : 1 TB (162.07 GB free)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Karabiner.app
[loaded] org.pqrs.driver.Karabiner (10.2.0 - SDK 10.9) Support
/Library/Application Support/Avast/components/fileshield/unsigned
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
/Library/Application Support/Avast/components/proxy/unsigned
[loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
/Library/Parallels/Parallels Service.app
[not loaded] com.parallels.kext.prl_hid_hook (7.0 15095.768120) Support
[not loaded] com.parallels.kext.prl_hypervisor (7.0 15095.768120) Support
[not loaded] com.parallels.kext.prl_netbridge (7.0 15095.768120) Support
[not loaded] com.parallels.kext.prl_usb_connect (7.0 15095.768120) Support
[not loaded] com.parallels.kext.prl_vnic (7.0 15095.768120) Support
/System/Library/Extensions
[not loaded] com.caiaq.driver.NIUSBAudio2DJDriver (2.4.23) Support
[not loaded] com.caiaq.driver.NIUSBAudio4DJDriver (2.4.23) Support
[not loaded] com.caiaq.driver.NIUSBHardwareDriver (2.4.23) Support
[not loaded] com.caiaq.driver.NIUSBTraktorAudio2Driver (2.4.23) Support
[loaded] com.caiaq.driver.NIUSBTraktorKontrolS4Driver (2.4.23) Support
[not loaded] com.caiaq.driver.NIUSBTraktorKontrolX1Driver (2.4.21) Support
[not loaded] com.native-instruments.driver.NIUSBDeviceHelper (1.0.8) Support
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.74) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) Support
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.avast.userinit.plist Support
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[invalid?] com.parallels.desktop.launch.plist Support
[loaded] com.parallels.DesktopControlAgent.plist Support
[running] com.parallels.vm.prl_pcproxy.plist Support
[running] com.rim.BBAlbumArtCacher.plist Support
[running] com.rim.BBLaunchAgent.plist Support
[loaded] org.gpgtools.gpgmail.enable-bundles.plist Support
[loaded] org.gpgtools.gpgmail.patch-uuid-user.plist Support
[running] org.gpgtools.Libmacgpg.xpc.plist Support
[loaded] org.gpgtools.macgpg2.fix.plist Support
[running] org.gpgtools.macgpg2.shutdown-gpg-agent.plist Support
[loaded] org.gpgtools.macgpg2.updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[loaded] com.avast.init.plist Support
[loaded] com.avast.uninstall.plist Support
[loaded] com.avast.update.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.parallels.desktop.launchdaemon.plist Support
[running] com.rim.BBDaemon.plist Support
[loaded] org.gpgtools.gpgmail.patch-uuid.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[invalid?] com.avast.home.userinit.plist Support
[loaded] com.divx.agent.postinstall.plist Support
[loaded] com.google.keystone.agent.plist Support
[not loaded] com.spotify.webhelper.plist Support
User Login Items: ℹ️
smcFanControl Application (/Applications/smcFanControl.app)
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Spotify UNKNOWN (missing value)
TorBrowser UNKNOWN (missing value)
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
Wondershare Helper Compact Application (/Users/[redacted]/Library/Application Support/Helper/Wondershare Helper Compact.app)
SE Media Sync Helper ApplicationHidden (/Applications/Sony Ericsson Media Sync.app/Contents/Resources/SE Media Sync Helper.app)
Karabiner Application (/Applications/Karabiner.app)
NIHardwareAgent ApplicationHidden (/Library/Application Support/Native Instruments/Hardware/NIHardwareAgent.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
OVSHelper: Version: 1.1 Support
DivXBrowserPlugin: Version: 2.2 Support
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.3.5 - SDK 10.6 Support
Scorch: Version: 6.2.0 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User Internet Plug-ins: ℹ️
Picasa: Version: 1.0 - SDK 10.6 Support
Safari Extensions: ℹ️
AdBlock
wrc
3rd Party Preference Panes: ℹ️
DivX Support
Flash Player Support
GPGPreferences Support
Native Instruments USB Audio Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 394.56 GB
Destinations:
Stampatron II [Local]
Total size: 499.76 GB
Total number of backups: 8
Oldest backup: 2014-10-08 21:14:51 +0000
Last backup: 2014-10-09 04:18:39 +0000
Size of backup disk: Too small
Backup size 499.76 GB < (Disk used 394.56 GB X 3)
Backup [Local]
Total size: 499.94 GB
Total number of backups: 1
Oldest backup: 2014-09-20 07:40:57 +0000
Last backup: 2014-09-20 07:40:57 +0000
Size of backup disk: Too small
Backup size 499.94 GB < (Disk used 394.56 GB X 3)
Top Processes by CPU: ℹ️
      5% WindowServer
      3% bluetoothaudiod
      2% com.avast.daemon
      1% iTunes
      1% Safari
Top Processes by Memory: ℹ️
205 MB Safari
106 MB com.apple.WebKit.WebContent
90 MB com.avast.daemon
69 MB Finder
43 MB iTunes
Virtual Memory Information: ℹ️
34 MB Free RAM
1.03 GB Active RAM
1.01 GB Inactive RAM
1.27 GB Wired RAM
20.97 GB Page-ins
2.19 GB Page-outs

You have Avast installed which could be causing some problems for your Mac's operation. Use the Avast uninstaller and get rid of it.
Boot into Recovery mode by holding down the Command and R keys together and use Disk Utility there to Repair your hard drive and repair disk permissions.
Hope that helps.
As for the shift key, you should take the computer to the Apple Genius Bar and have them look at it.

MacBook Pro (Early 2011) No Wifi Hardware Installed

Please help me! I'm confused.
My 13" MacBook Pro (Early 2011) Keeps saying that No WIFI Hardware is installed.
My Mac has been running great until earlier this week. I turned it off one night before bed and then the next morning as I switched it on, it said there was no WIFI hardware installed. I launched recover mode which is when I figured my WIFI works in recovery mode just not in the Mac itself. I reinstalled a fresh copy of OS X Yosemite which worked for a day, but sure thing the next day I loaded the Mac and then there was the same issue. So I reinstalled OS X Yosemite... AGAIN!! this time I hit an error, Yosemite had deleting my recovery drive and unmounted my Macintosh HD but thats anther story to fix another time. Once I finally repaired my disk to install Yosemite my WIFI was working again... until I restarted my Mac and it went off and the error reappeared. Luckily Apple released OS X 10.10.2 so I plugged in the ethernet and installed it which has fixed my WIFI... for now, I'm to scared to restart my Mac. Does Anyone know what is going on? Thank you
Like I said when it gives the error (No WIFI Hardware installed) the wifi connects in recovery just not on my Mac OS. I'm currently using my Mac to submit this question and all seems fine so far.
Thanks again.

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

MacBook Pro Early 2011 - Airplay Mirroring only sends audio to Apple TV 2nd Gen

Ok, I'm stumped by this one. I have a 15" MBP Early 2011 edition and an Apple TV 2nd Gen. Airplay Mirroring from my MBP to Apple TV only transmits the audio -- the MBP will resize the screen like it's connected to a 16:9 device, and Apple TV will show a black screen like it's about to pick up the video signal, but no video transmits. A couple of times, video started transmitting, but it was about 30 seconds delayed (?!) and extremely choppy. Both devices are connected wirelessly to a Linksys router with 5 GHz (wireless N) capabilities. The router has been configured to Apple's recommendations for Airplay Mirroring.
A little more about my MacBook Pro:
Early 2011 Model ID: MacBookPro8,2
OS: 10.8.2 Mountain Lion
CPU: Intel Core i7
Processor Speed:          2 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          6 MB
Memory: 4 GB
GPU: AMD Radeon HD 6490M, VRAM 256 MB Total
This problem is driving me crazy! Airplay works flawlessly between my iPhone 5 and Apple TV, but not with a much more powerful laptop. Also, I tried Mirroring from a friend's 13" MacBook Pro, and it did the same thing.
Any suggestions, tips, ideas, etc. to get this working is appreciated!

Rudegar wrote:
your macbook dont support airplay mirror
He has an Early-2011 MacBook Pro, which does meet the requirements. The issue is that it is running OS X 10.7.5 and needs to be upgraded to Mountain Lion to use mirroring.

Connecting my MacBook Pro (early 2011) to my Sony LCD TV (KDL-46XBR6) and listening to Multichannel surround sound.

Dear all,
I am attempting to connect my MacBook Pro (early 2011) to my Sony LCD TV (KDL-46XBR6) via the Mini DisplayPort to HDMI. I have successfully connected the two devices and can select "SONY TV XV" in the sound preference pane. I can see and hear what I'd like, however, I can only monitor the sound in 2 channel stereo. I have my TV connected to a Sony 7.1 audio receiver via an optical cable and can monitor 7.1 sound via other sources (Blu-ray, broadcast, etc). When I go into the Audio Midi Setup utility, I am unable to configure my speakers to be anything but 2 channel stereo. I am given the options for "2ch-16bit", "2ch-20bit", "2ch-24bit" and "Encoded Digital Audio". When I select "Encoded Digital Audio", my output automatically changes to Built-in Output. Has anyone been able to successfully resolve this issue? Thanks for all your help!
Gregg

You should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro

Connecting my MacBook Pro (early 2011) to my Sony LCD TV (KDL-46XBR6) via the Mini DisplayPort and listening to Multichannel surround sound.

Dear all,
I am attempting to connect my MacBook Pro (early 2011) to my Sony LCD TV (KDL-46XBR6) via the Mini DisplayPort to HDMI. I have successfully connected the two devices and can select "SONY TV XV" in the sound preference pane. I can see and hear what I'd like, however, I can only monitor the sound in 2 channel stereo. I have my TV connected to a Sony 7.1 audio receiver via an optical cable and can monitor 7.1 sound via other sources (Blu-ray, broadcast, etc). When I go into the Audio Midi Setup utility, I am unable to configure my speakers to be anything but 2 channel stereo. I am given the options for "2ch-16bit", "2ch-20bit", "2ch-24bit" and "Encoded Digital Audio". When I select "Encoded Digital Audio", my output automatically changes to Built-in Output. Has anyone been able to successfully resolve this issue? Thanks for all your help!
Gregg

I have tested it with the Moshi (http://store.apple.com/us/product/H1824ZM/A/moshi-mini-dp-to-hdmi-adapter-with-a udio-support) and Belkin (http://store.apple.com/us/product/HA342ZM/A/belkin-mini-displayport-to-hdmi-adap ter) adapters, both purchased from the Apple Store with no such luck. Have you or anyone else had success with any other third-party adapters?

15in Macbook Pro early 2011 won't shutoff nor can I run disk utilities. Any suggestions?

Situation:
I have a 15in Macbook Pro early 2011 that I can not shutdown nor can I run disk utility to repair any issues. I recently had it serviced to replace a failing hard drive.
Known issues:
     - Disk Utility: Will not respond. A couple days ago I had to run it to repair some damage to harddrive. When I try to open it, it is frozen with the rainbow ball.
     - Shutdown: I can not shutdown or restart my computer as it freezes during shutdown with grey screen. I can manually turn it on and off by holding down the      power button.
     - Disc Drive: This may not be related but I can not eject DVD in the disc drive.
Any thoughts or advice would be greatly appreciated. I currently live overseas (for school) so just going to an Apple store is not really a realistic option for me at this time. Thanks

thetribes wrote:
Situation:
I recently had it serviced to replace a failing hard drive.
Take it back to where you had it serviced, there is usually a ~90 day guarantee
you can force a shutdown by holding the power button for longer than usual.

Macbook pro (early 2011) won't boot after sleep. Black screen with chime

I put my macbook pro early 2011 (Quad, 8 Gb RAM, 2 x SSD-disks, external 27" LED-screen) into sleep mode a couple of days ago. Everything was fine then.
However, the morning after it wouldn't wake up - this is the bootup process:
- Black screen
- Chime
- Still black screen, nothing happens.
So I've tried resetting NVRAM, SMC etc - no luck. Even tried the "Powerbutton" + "S" + Enter but to no avail.So I immediately began dd:ing my SSD-disk before trying anything else, figured it might be some preboot-corruption of some sort since I'm running FileVault2 with full AES-encryption.
Now, the problem (after some troubleshooting) doesn't seem to be disk-oriented. Remember the black screen? I've tried pulling the SATA-cables one by one on the motherboard of the Macbook pro and discovered that when I pulled the cable which reaches over the optical device (just above the SATA-cable for the optical device) then I get a white screen and I'm able to get as far as boot-option, or even disk repair (if I run my SSD-disk over USB and without any cables (three of them) attacked to the motherboard).
So since nothing works when I have disks connected or that third cable (some kind of logic board bridge? Reaches through the screen over to the other side of the mother board).
Also worth noting is that I was running out of free disk-space on my system disk. The disk is 250 Gb and free space was about 5-10 Gb (less than 5%). I also make the macbook pro dump contents of memory to disk (since my disk is encrypted it resides safely there).
So, my fear is that Apple hasn't used A-grade controllers for the disk drives (I've had drive corruption before, a Crucial 6 GB/s drive trashed less than a week before a presentation) and doesn't handle "unexpected events" nor signal/noise ratio very well. Maybe free space on disk was less than the 8 Gb needed to dump RAM (shouldn't have needed the full 8 Gb though) and this caused some kind of panic overwrite which trashed the controller?
Anyways, I've attached an image of the motherboard and I am wondering - what does the top cable which reaches over the optical drive do? Is it connected to the logic-board?

sspott wrote:
** The volume Macintosh HD could not be repaired.
Looks to me like a fatal error on the hard disk. IMHO, the only solution is to boot from an external device, reformat the hard drive, and restore from backup. If you don't have a backup, you're in trouble. Boot from the external device, try to mount the int'l drive, and, if successful, back up as much as possible. Also, try running Disk Utility—it may be possible to fix it while booted from a different device, thought I wouldn't bank on it. At any rate, make sure to run an AHT afterwards, to check for possible hardware issues with the drive.
If the machine is still covered by AppleCare, take it to the store by all means. But they won't try to recover anything from the int'l drive, just check it, erase it if they don't find hardware issues, and re-install a fresh copy of the OS.
That's why you should always have at least 1 up-to-date backup (2, with one kept off-site, is better).

I have a Macbook Pro Early 2011 from the USA. After installing Mavericks, Adobe CS6 crashes whenever it is plugged into a 27inch cinema display I purchased from the apple store in China (We moved to China). It works when not plugged into 27inch display.

I have a Macbook Pro Early 2011 from the USA. It is now running Mavericks. I connect it to a 27" Cinema Display that I bought in China after we moved to China. Before I installed Mavericks, I could run all of the Adobe CS6 and Adobe CS5.5 applications on my Macbook Pro while connected to the cinema display. Now that I have Mavericks installed, whenever I am connected to my 27" CInema display my Adobe applications crash upon opening. I know this is a rare scenario, but does anyone have any ideas how to fix this problem? Is there a new driver that needs installed? I'd appreciate any help.

I am also having a similar issue. I used Adobe Lightroom and my whole display goes black. Even my laptop screen and the lights on the keyboard go black. I can still hear the fan running, so I assume it is just the display. This is my first Mac and I have had nothing but issues. I think I am going back to Windows after this.

Macbook Pro early-2011 crashing/locking-up

Hello,
My MacBook Pro (early-2011 model 15") has been locking up and crashing lately. It was recently upgraded to Mavericks OSX.This has happened only a handful of randomn times over the past two months. I don't think it has to do with the OS version because it did this a couple months ago as stated when I had Lion, and also ML. However, in the past 24 hours i have locked up around 5 times and crashed at 3 times. I've attached the crash report below from the latest crash this morning. I use one usb port to connect to a Dell monitor using DisplayLink adapter, and the other usb port goes to a 4-port usb hub that has my wired keyboard, mouse, and phones that I test with plugged into. The mini displayport goes to another Dell monitor. Can anyone help me determine the issue? Does it look to you like the RAM has been corrupted and needs replacing perhaps? Or maybe it is this usb hub causing memory crashes from having so much stuff plugged into it? Log below:
Anonymous UUID:       A06D9E0B-752F-521A-C64F-89E5D1C93276
Fri Nov 1 09:51:46 2013
Machine-check capabilities 0x0000000000000c09:
family: 6 model: 42 stepping: 7 microcode: 40
Intel(R) Core(TM) i7-2635QM CPU @ 2.00GHz
9 error-reporting banks
threshold-based error status present
extended corrected memory error handling present
Processor 0: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
MCA error code:            0x117a
Model specific error code: 0x0001
Other information:         0x00000000
Threshold-based status:    Undefined
Status bits:
   Processor context corrupt
   ADDR register valid
   MISC register valid
   Error enabled
   Uncorrected error
IA32_MC7_ADDR(0x41e): 0x000000004dc98080
IA32_MC7_MISC(0x41f): 0x000000b72e020086
Package 0 logged:
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 1: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
MCA error code:            0x117a
Model specific error code: 0x0001
Other information:         0x00000000
Threshold-based status:    Undefined
Status bits:
   Processor context corrupt
   ADDR register valid
   MISC register valid
   Error enabled
   Uncorrected error
IA32_MC7_ADDR(0x41e): 0x000000004dc98080
IA32_MC7_MISC(0x41f): 0x000000b72e020086
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 2: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
MCA error code:            0x117a
Model specific error code: 0x0001
Other information:         0x00000000
Threshold-based status:    Undefined
Status bits:
   Processor context corrupt
   ADDR register valid
   MISC register valid
   Error enabled
   Uncorrected error
IA32_MC7_ADDR(0x41e): 0x000000004dc98080
IA32_MC7_MISC(0x41f): 0x000000b72e020086
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 3: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
MCA error code:            0x117a
Model specific error code: 0x0001
Other information:         0x00000000
Threshold-based status:    Undefined
Status bits:
   Processor context corrupt
   ADDR register valid
   MISC register valid
   Error enabled
   Uncorrected error
IA32_MC7_ADDR(0x41e): 0x000000004dc98080
IA32_MC7_MISC(0x41f): 0x000000b72e020086
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 4: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
MCA error code:            0x117a
Model specific error code: 0x0001
Other information:         0x00000000
Threshold-based status:    Undefined
Status bits:
   Processor context corrupt
   ADDR register valid
   MISC register valid
   Error enabled
   Uncorrected error
IA32_MC7_ADDR(0x41e): 0x000000004dc98080
IA32_MC7_MISC(0x41f): 0x000000b72e020086
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 5: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
MCA error code:            0x117a
Model specific error code: 0x0001
Other information:         0x00000000
Threshold-based status:    Undefined
Status bits:
   Processor context corrupt
   ADDR register valid
   MISC register valid
   Error enabled
   Uncorrected error
IA32_MC7_ADDR(0x41e): 0x000000004dc98080
IA32_MC7_MISC(0x41f): 0x000000b72e020086
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 6: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
MCA error code:            0x117a
Model specific error code: 0x0001
Other information:         0x00000000
Threshold-based status:    Undefined
Status bits:
   Processor context corrupt
   ADDR register valid
   MISC register valid
   Error enabled
   Uncorrected error
IA32_MC7_ADDR(0x41e): 0x000000004dc98080
IA32_MC7_MISC(0x41f): 0x000000b72e020086
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 7: machine-check status 0x000
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2 GHz, 8 GB, SMC 1.69f4
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Graphics: AMD Radeon HD 6490M, AMD Radeon HD 6490M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: KINGSTON SV300S37A240G, 240.06 GB
Serial ATA Device: MATSHITADVD-R   UJ-8A8
USB Device: Hub
USB Device: Plugable UGA-2K-A
USB Device: IR Receiver
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: USB2.0 Hub
USB Device: Hub
USB Device: G500
USB Device: Multimedia keyboard
USB Device: Hub
USB Device: XT912
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1

Hi Will-H,
Thanks for using Apple Support Communities. It sounds like more isolation might be needed to rule some things out. I would recommend this article:
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
Disconnect any peripheral devices you just connected (for example, a printer). They may not be compatible with your version of OS X.
Uninstall any app plug-ins or enhancements from other manufacturers.If you recently updated the app or OS X, a plug-in or enhancement you installed may no longer be compatible.
Use Apple Diagnostics or Apple Hardware Test. These tools can tell you if hardware you installed, such as additional memory, is incompatible, improperly installed, or defective.Use Apple Diagnostics or Apple Hardware Test
Restart your Mac in safe mode.Start up in safe mode
Use Disk Utility to repair your computer’s internal disk.
Cheers,
- Ari

Macbook Pro(Early 2011) not turning on; Flashing Orange Light on Charger

So yesterday, I did a teardown of my Macbook pro (early 2011) in an effort to clean the keyboard because some keys weren't working. I used rubbing alcohol and As I was putting the keyboard and trackpad connectors back in, I heard the computer making a startup/shut down noise so; I realized I neglected to unplug the battery - out of fear of shock and impulse, I unplugged the battery quickly. The computer shut off and, ever since then, my computer won't turn on. When I plug in the charger; it initially gives me a very faint green light, and when I hold on the power button it changes into a very dim orange blinking light.
I've tried:
1) Resetting the SMC (No such luck)
2) Unplugging the battery; letting the charger charge the motherboard overnight (No luck)
I'd really appreciate some fresh ideas; just to reitterate, it only stopped working the second I impulsively unplugged the charger. So, can a battery die from something like that? Short circuit? Any advice would be really appreciated as I'm in the middle of finals week and really need it.

My only issue with that is that there weren't any hardware issues before i decided to open it up. I know the apple people will be very eager to charge me for something in not convinced is a hardware issue. I just get the feeling i screwed something up while I was putting it back together. I'll post a picture of my logic board soon to see if there's something obvious I'm missing

My MacBook Pro (Early 2011) will constantly loose it's internet connection.

Okay, so I have wireless internet service which works great. I have an android smartphone, an HP laptop and a MacBook Pro (early 2011). My android smartphone and my hp computer both connect perfectly to the wireless network. On the other hand, my Mac connects at times but it rapidly looses connection. All of the wifi bars on the mac appear as if the computer was connected, but there is no connection. Does anyone know how to fix this? It's getting very annoying because I have to turn my wifi (on the mac) on and off to get internet connection again. I would really like to receive uninterrupted internet coverage on all my devices, including my mac. PLEASE HELP!

I am having the same issue. My macbook pro is one of the models from late last year. Within the past few weeks I have been getting disconnected from my wifi for no reason. It still shows that I am connected but nothing will load. When I dissconect and reconnect it loads up fine and everything works again, though in another 10 minutes it will crash again.

Lost my application dvd that came with macbook pro, early 2011. any alternatives to get the applications in that??

lost my application dvd that came with macbook pro, early 2011. any alternatives to get the applications in that??

I'm not sure how this is an iTunes issue, but anyway, other than buying the apps from the Mac App Store (note that iDVD and iWeb are not available via the App Store), the only alternative is to call Apple support and give them the serial number of your Mac. They can usually sell you a new disk set for a reasonable fee.
Regards.

Macbook Pro (Early 2011) not recognizing Apple Magic Mouse

OK, so I recently bought a MacBook Pro (Early 2011 Model) and I cant get my Magic Mouse to connect to the Bluetooth. This laptop is used, but I bought it from a Apple reseller and they told me that it was refurbished and that there should not be anything that is not working. Anyways, when I turn on my Apple Magic Mouse and go to Bluetooth or Mouse in the System Preferences, I don't see anything at all just the loading circle. It will not appear. I have tried doing the trick of holding Command+Option+P+R on startup like some people have suggested but that doesn't seem to change anything. I also brought it to the Apple store and the associate connected the mouse to one of the computers there, so I know that my mouse is working. Is there a way to tell if the Bluetooth in my laptop needs to be replaced? if so, can it be replaced easily without a big cost?

Hi kbridea1,
Welcome to Apple Support Communities.
It sounds like your MacBook Pro isn’t recognizing your Magic Mouse but other devices are able to recognize it. The article linked below provides a lot of great troubleshooting suggestions that will resolve most issues like the one you’ve described.
Troubleshooting wireless mouse and keyboard issues
I hope this helps.
-Jason

Permissions Issue on my MacBook Pro (early) 2011

Similar Messages

Maybe you are looking for