Permissions Issue with displaying WPC web page

Hi All (and Eric Heilers!)
I created and published a web page using web page composer. I added the web page to an iView and in turn the iView to a role. I assigned the role to myself and I was successfully able to see the Web Page....all was well.
Next I created a new test user and assigned a bunch of roles to a user group (one of the roles contained the web page iview). The role doesn't render the web page inside of the iView for the test user. I have given the test user Read/Write and also resorted to giving the user Owner permissions in almost everything but still I cannot render the web page!! I have tried permission in Security Zones in page builder (no_safety, and medium_safety), i have tried in, Portal Content Directory and also tried adding the test user full control permission from within the Web Page Composer role at the web site owner level. Still nothing. At best I was able to render the little toolbar which contains 'Edit" and 'RSS Feed' options on the top right, but not the web page itself.
Any helpful hints, suggestions, tips greatly welcome.
Kind regards,
Tony.

Thanks for your reply Eric,
So I'm just going to step thru this with you,
Prerequisites:
URL generator service -> I do not want to make the web pages externally accessible yet.
MIME handler service -> Is active.
Procedure
1) CM Repository Manager (this is optional so I didnt do it)
2) Folder Structure (Check)
3) Global Entry Points (this is optional so I didnt do it)
4) Configuring Entry Points for iViews (this is optional so I didnt do it)
5) I have created iViews to display the Web Pages
6) I have given relevant permission in security zones. (This is also where you advised me to do it for com.sap.nw.wpc -> wpc)
7) Although optional I am using this strategy to create group for roles and iViews created in Step 5 above.
8) I have assigned the relevant roles and group to users.
9) I have defined permissions in the web content repository.
10) I haven't configured search for web pages
11) I haven't configured localisation for languages and regions.
12) I haven't done any performance optimizing.
Now, from this you can see why I feel like I have done all that is necessary so far.
Any further suggestions?
Also, is there a way to upload a html page to the Web Pages folder and just publish that instead of using the WPC layout? As I want to keep all the javascript and stylesheet information? *
Kind regards,
Tony.

Similar Messages

  • SunRay issue with Beehive Online web page display

    I've noticed that when accessing the [Beehive Online web pages| https://beehiveonline.oracle.com/index.html] from a SunRay often results in loss of some of the page formatting and/or a problem loading page error:
    "The connection was reset
    The connection to the server was reset while the page was loading.
    The site could be temporarily unavailable or too busy. Try again in a few
    moments.
    If you are unable to load any pages, check your computer's network
    connection.
    If your computer or network is protected by a firewall or proxy, make sure
    that Firefox is permitted to access the Web."
    <Try Again>
    Clicking the 'Try Again' button usually never works - a shift/reload of the page and/or clearing the cache is usually what it takes to get the page to display again. The loss of background formatting happens more often, and again only is fixed by shift/reloading the page.
    In doing a test before posting this thread, after receiving the 'problem loading page error', I did a shift/reload to display the page. But then every link I clicked on from the https://beehiveonline.oracle.com/index.html navigation resulted in the same error, forcing me to do the shift/reload on every page! I could only get this behavior to quite by going into preferences and clearing my cache. Then I started seeing the loss of the background formatting!
    This problem appears to be only from a SunRay (using FF 6.0.2, but this also occurred using FF 3.6). I pulled up FF 3.6.18 as well as IE 9 on my Oracle laptop (Windows XP), and clicked through the various Beehive Online pages multiple times, and did not experience any format loss or page load problem.
    Is there a fix for these issues on SunRay?
    Thanks,
    Marjie

    Still seeing this issue on SunRay. I posted a couple of screenshots in my public documents folder on our team BOL workspace - hopefully you can view them for an examples of what I'm talking about:
    loss of formatting
    connection reset error
    Edited by: MWake on Oct 10, 2011 8:08 AM

  • Performance Issue With Displaying Candidate Details for iRecruitment

    We are in EBS R12.1.3 when we trying to display the Candidate Details page in iRecruitment iRecruitment >vacancies>applicants> click on applicant>   the page spins for  a quite whille to show the results and some times we see the 500 errors..
    We are in R12.1.3 and also applied the  Patch.10427777:R12.IRC.B patch.. is there any  tunnign steps for the iRecruitment  page=/oracle/apps/irc/candidateSearch/webui/CmAplSrchPG

    You have already applied the patch mention in note: Performance Issue With Displaying Candidate Details Page in 12.1.3 (Doc ID 1293164.1)
    check this note also Performance Issue when Clicking on Candidate Name (Doc ID 1575164.1)
    thanks

  • Issue with displaying summary in the Page Bottom

    Hi Friends,
    I have an issue with displaying summary in the page bottom. for this i am using command BOTTOM and ENDBOTTOM in Main Window.
    I designed 2 pages are First and Next, in the first it displays PO Header details and Item details in the Main window and also Item details continuious in the Next Page also.
    If the lines are enough in Bottom then it displays the summary. But if the lines are not enough in bottom then it does not trigger the new page, so that it doesn't displays the Summary in Bottom.
    for ex: Total lines of the page 50 and Bottom required 15 lines. In the next page contains upto 35 lines, it triggers the Bottom.
    But if the lines are more than 35 and below than 50, it does not trigger the new page so that it does not shows the bottom.
    Please help me on the same, this is very urgent.I will give a rewatrd if it is helful.
    Regards,
    Subbarao

    HI,
    Try with printing the bottom data with Protect and ENDPROTECT along with your Bottom and endbottom.
    Eg: Protect
    bottom
    text
    endbottom
    endprotect.
    Regards,
    Venkatesh

  • Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the pag

    Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the page, so it suits size automatically) to a mobile web page to be displayed not on a normal browser, but in a WebView.

    Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the page, so it suits size automatically) to a mobile web page to be displayed not on a normal browser, but in a WebView.

  • I'm experimenting some issues uploading barclays bank web page with safari

    I'm experimenting some issues uploading barclays bank web page with safari

    What issues are you having, and with which OS X & Safari version ?. Do provide a link to a page that causes problems.

  • IE browser and Web Cache and SSL - Internet Explorer cannot display the web page

    When using IE8, IE9, or IE10 with Web Cache and SSL certain pages which display a lot of data returns the error - "Internet Explorer cannot display the web page."
    if we eliminate SSL but continue to use Web Cache, the error does *not* reproduce & If we eliminate Web Cache altogether the error again does *not* reproduce.  The error is only reproducible when we use SSL with Web Cache and if we use IE and we access *large* pages. The error is not reproducible with Firefox or Chrome. This is a Web Tier 11.1.1.7 installation with WebLogic 10.3.6 & Red Hat Enterprise 5 Linux x86-64
    Event_log shows below errors.
    [2013-06-13T16:34:35-04:00] [webcache] [NOTIFICATION:1] [WXE-09002] [logging] [ecid: ] Generated by Oracle Web Cache on Thu Jun 13 16:34:35 2013 - Build 11.1.1.7.0 130113.0721
    [2013-06-13T16:34:36-04:00] [webcache] [NOTIFICATION:1] [WXE-08513] [logging] [ecid: ] Cache server process ID 4469 is starting up.
    [2013-06-13T16:34:36-04:00] [webcache] [NOTIFICATION:1] [WXE-09612] [main] [ecid: ] Oracle Web Cache 11g (11.1.1.6), Build 11.1.1.7.0 130113.0721
    [2013-06-13T16:34:37-04:00] [webcache] [NOTIFICATION:1] [WXE-13002] [config] [ecid: ] Maximum allowed incoming connections are 1000
    [2013-06-13T16:35:00-04:00] [webcache] [NOTIFICATION:1] [WXE-09441] [stats] [ecid: ] DMS enabled
    [2013-06-13T16:35:28-04:00] [webcache] [NOTIFICATION:1] [WXE-12209] [cluster] [ecid: ] A 1 node cluster successfully initialized
    [2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09614] [main] [ecid: ] The following Oracle Web Cache internal files are pre-populated to the cache: [[
            /nssb-p.adm.fit.edu:7785/_oracle_http_server_webcache_static_.html
            /nssb-p.adm.fit.edu:4448/_oracle_http_server_webcache_static_.html
    [2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09614] [main] [ecid: ]  [[
    The following Oracle Web Cache internal files are pre-populated to the cache: [[
            /nssb-p.adm.fit.edu:7785/_oracle_http_server_webcache_checkserviceavailability_.html
            /nssb-p.adm.fit.edu:4448/_oracle_http_server_webcache_checkserviceavailability_.html
    [2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09608] [main] [ecid: ] The cache server process started successfully.
    [2013-06-13T16:35:29-04:00] [webcache] [WARNING:1] [WXE-12104] [utl] [ecid: ] Oracle Web Cache process has page faulted
    [2013-06-13T16:44:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
    [2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
    [2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55145
    [2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
    [2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
    [2013-06-13T16:44:27-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55144
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
    [2013-06-13T16:44:27-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55148
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
    [2013-06-13T16:44:35-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
    [2013-06-13T16:44:35-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:45:18-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:45:18-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:45:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
    [2013-06-13T16:45:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:45:41-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:45:41-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    Any help or suggestions are greatly appreciated
    Tnx a lot,
    Lokesh

    Hello ,
    Try Below Workarounds:
    Workaround 1:
    Open Central Admin
    àApplication Management  à
    Configure Alternate access mapping-->Edit your web application zone and add your server name in Intranet zone. So default can be serverIP and intranet could be servername.
    Workaround 2:
    Might be there is some issue with DNS and try to check that WebApplication is pointing to correct IP or not.  
    Also try to access your Sharepoint site using ip Address .. If you still gets error Kindly share the logs .. 
    Best
    Regards Kuldeep Verma
    Please remember to click "Mark As Answer"
    if a post solves your problem or "Vote As Helpful" if it was useful.

  • Web Page Composer (WPC) – Web page - Approval process

    We have requirement with our web publishing environment where we want to stage the web pages for review before they are published for public. Currently, if you develop a web page in Web Page Composer ( WPC ) and click publish to review the content/layout. The page is published for public and included in TRex and can be searchable.
    We thought KM Approval process will help resolve this issue. The approval process work very well with the u2018Site Contentu2019 where once author develop the content (article, paragraph etc.) and submit for approval in this case Editor (role). The content under site content folder is not published (not available for public) until approved by Editor.
    This same approval process does not work on the Web Page folder. We have exactly same permission/ Service permission setup on the Web Page folder. Even though the u2018Approvalu2019 is turned on the Web Page folder it does not inherit the same to new web pages created or existing web pages in that folder. If we go and turn on the u2018Approvalu2019 on a page then we see a u2018Approvalu2019 button in WPC but when you submit the page for approval it pops up another screen with below message.
    Confirm that you want to publish the page. A new version of the homepage will be created and, if appropriate, submitted for approval. Changes to pages not subject to approval are active immediately.
    When you confirm this message nothing happens (no workflow kicks off).
    I would like to hear if any one has tried the approval process on WPC web pages. If you are not using this process how you are staging the web page for review before publishing to public.
    Thanks.

    Hi Bertina,
    We encountered the same problem couple days back in our environment. There is a SAP note (# 1294833) which details the issue but affected version indicated in this note is different then what we are on so we decided to create a note for SAP.
    Below is SAP response for this issues
    13.09.2010 - 08:52:12 CET - Reply by SAP     
    Dear customer,
    I can confirm that the issue described in SAP Note 1294833 is indeed
    present in EP 7.01 SP4 and is the reason you are currently experiencing
    this problem.
    Unfortunately, as outlined in the note, there is no workaround
    available but our developers have advised me that the fix will be
    included in the next patch for KMC WEB PAGE COMPOSER 7.01 SP04.
    Hope this helps.

  • "Internet Explorer Cannot Display the web Page

    on August 7th
    I purchased a brand new computer that has
    Vista Home premium on it,
    To date I have not been unable to open this program.
    I have been looking for help ever since,
    I have been all over the net, I have tried
    Lenovo sites.
    I tried to call Lenovo, unfortunately I got no help there,
    as I am deaf.
    I looked through this site, in the hope that someone
    who might have experienced this can help.
    The Welcome center comes up when I start the Computer.
    when I click on Internet explorer this is what I get.
    Internet Explorer Cannot Display the web Page"
    Most likely Causes:
    *You are not connected to the Internet.
    * The web site is encountering problems.
    * There might be a typing error in the address.
    "What can you try"
    'Diagnose Connection Problems"
    I did this and this is what I got.
    Windows did not find any problems with this
    Computer's network connection.
    I tried more suggestions, and got more of the same.
    I tried everything that looks promising, to no avail;
    Please help if you can, it would be much appreciated;
    Regards
    Victoria
    Lenovo 3000 H210 53552p desktop
    Vista home Priemium 64

    Victoria,
       There are a few reasons that the error may come up. The first thing that I need to ask is when you say "I have been all over the net, I have tried Lenovo sites.', is this on the new computer? (i.e.. You are able to browse the internet, but get the error every time you initially launch Internet Explorer)
      If so, the likely issue is that the particular web site that your home page is set too is invalid or is encountering problems.
    Dennis

  • Can Spry display another web page within a detail region?

    I currently have a non-Spry enabled site I would like to add
    Spry to. Basically, it is a story/photo web site and I have
    separate pages created already for each photo "event" that includes
    text, pictures, etc. Right now I have a menu with all of the
    stories that the users clicks on and it takes them to that
    particular story. I also use templates to control a common look and
    feel and header, but basically, one web page per story (they are
    all similar, but varying # of pictures, paragraphs, etc.). It works
    fine, but it does reload the web page for every story.
    So, what I would like to do is have one region defined where
    I have a sorted list of "stories" with dates and brief descriptions
    and when a user clicks on one of the stories I would like it to
    display the web page I have already created in another
    region....kind of like message preview in Outlook. Anyway, I know
    it is easy enough to create an XML data set that defines the title
    of the story, date, etc., and I could even include a relative link
    of the actual web page story in the data set to define where the
    web page is. I guess my main question is, how would I display an
    entire web page inside the detail div "region"? I know if you just
    had a simple picture, it would look something like this: <img
    src="images/{@path}"><br/>Name:{@path}, but what tag could
    you use to pull in an entire web page to preview inside the detail
    div region?
    Thanks in advance!

    Well I don't know if this is exactly what you're looking for, but you can have a browser window pop up from an event in an applet. If you use something like:
    getAppletContext().showDocument(new URL(theUrl), "_blank");
    a new browser window will pop up with whatever URL you want.
    Hope that helps a little.
    -Sheepy.

  • FPN (Federated Portal) and WPC (Web Page Composer)

    Hi all,
    We implemented various web sites based on WPC (Web Page Composer) and now we need to federate this instance with other consumer nodes.
    I read on SAP 880842 note that it's not possible to federate WPC.
    Is there any options to federate sites developed in WPC?
    What can I do in this scenario?
    Thanks!

    Thanks again Marcus.
    But we can't use this option because we'll loose the WPC structure... It will need to be rebuild all site navigations...
    We are working now with WPC content mirror (copying content from one server to another).
    But we still need some help. We need to automatic copy KM content. Can you help us in this case too?
    I opened a thread at this link:
    /thread/1092248 [original link is broken]
    Edited by: Ricardo Guedes on Oct 20, 2008 3:29 PM

  • Permissions issue with OSX 10.5.8

    This is likely a newbie question. I am new to OS X, but I am familiar with Linux/Unix Terminal usage.
    I have a permissions issue with OSX 10.5.8.
    I cannot use basic commands on the Terminal, such as mkdir, on my own home directory. I get an error message saying the operation is not permitted.
    I have traced the probable culprit down to default ACL permissions settings.
    So after hours of research on Google, I found out that ACL are turned on by default in OSX 10.5.8.
    But I don't know how to safely use it yet, so I need help.
    I'm not quite familiar with ACL, so I need to know how to add myself safely and securely to modify my home directory.
    The command is with chmod. Can this also be done via the GUI?
    What is the option for chmod to modify my home directory?
    Is it:
    *$ cd ~*
    *$ chmod +a "user:john allow write" .*
    *$ chmod +a "user:john allow delete" .*
    Alternatively, if I use the "chmod -N ." command on the home directory, will that safely remove all ACL? Or is that recipe for a major security hole in my machine?
    Thanks!

    There are many people on this board that know way more than I do. Sometimes there is the tendency to copy/paste some kind of boilerplate response though, especially if there isn't quite enough information about a particular problem, so just keep trying.
    You should be able to add anything you want to your user directory without the use of any ACL entries. The purpose for the *deny delete* entries on the system created folders would probably be to reduce customer service calls about "accidentally" deleting some of the folders that the system expects to be there - it does not affect creating items.
    To verify that there aren't other attributes getting in the way, open the /Applications/Utilities/Terminal application, copy/paste the following command(s) into the window (there is a trailing space), drag the problem folder(s) from a Finder window to the Terminal window (this will paste the path), press return and post back with the results:
    /usr/bin/who am i; /bin/ls -leO@d
    These commands will display the ownership and permissions, including any ACL entries and extended attributes.
    On my Leopard user folder the permissions are drwxr-xr-x+ with an ACL entry *group:everyone deny delete*. These permissions allow read/write for me, read for everyone else, and an administrator authentication will be needed to delete the folder. These are similar to what you posted earlier, so maybe there is something else going on in there.

  • Printing from web pages is excruciatingly slow with most recent upgrades of Firefox .Use an iMac and an HP officejet printer. Printer works fine with Safari and woodprocessed files, but not with Firefox and web pages.

    Printing from web pages is excruciatingly slow since downloading most recent upgrades of Firefox Mozilla. I have a desktop iMac, OS 10.6.8, and an HP officejet printer 4500 G510n. The printer works fine with the Safari Browser and with woodprocessed files, but not with Firefox and web pages. Help please! It used to print fast with earlier versions of Firefox.

    Hello and welcome to the Apple Discussions Forum.
    I have hardly any experience with HP printers but since your posting has not been replied to yet I thought I'd offer some assistance.
    With the printer status and ink levels working, it shows that you have a connection to the printer. So I would look at the issue being with the protocol being used for the print queue on the Mac.
    Since you have XP and Vista working, I would check the printer queue configuration on either box. In XP, go to the Properties and select Ports. Click the Configure Port tab to view the connection. If you are using RAW, then this is known as HP Jetdirect-Socket on OS X. So if you are not sure what protocol was used before I would create another printer queue, this time selecting IP > HP Jetdirect-Socket. Then enter your IP address and select the K5400dn from the Print Using menu.
    If this still fails to print then please reply. There may be limitations with adding the HP driver this way that I am not aware of. There may also be other driver options you can look at, such as HPIJS. If Greg Sahli reads this posting he has expert knowledge on this matter and will be able to offer some guidance.
    PaHu

  • How do you Configure the "Screen Body" of the GUI to Display a Web Page?

    From the first screen in the GUI, I'd like to pull in a live web page to fill the right side of the screen (where the big SAP data graphic sits, next to the left hand navigation).  How is this done?  I've seen the University of Nebraska's GUI and they successfully pull in the front page of their SAP Support Site.  We'd like to do the same.
    Again, we simply want to have that frame of the GUI in teh Screen Body section to display a web page pointed at an absolute URL. Advice?
    Thank you!
    Lee Dudley
    Multnomah County, Oregon

    Hi lee,
    this link should be helpful
    [http://www.synactive.com/tutor_e/lessonv01.html]

  • Issue with displaying Unicode Characters returned by a webservice

    Hi, We are developing a mobile application which provides multi language selection (Arabic & English). but we are having an issue with displaying returned JSON which has Arabic text. The output we get is as below. Our .net client throws the following
    exception. Appreciate your kind help and thank you in advance.
    [net_WebHeaderInvalidControlChars]
    Arguments:
    Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=4.7.60408.0&File=System.Net.dll&Key=net_WebHeaderInvalidControlChars
    Parameter name: name”
    Returned JSON:
    https://72.44.81.184/~shababcapital/wp-json/posts?type=news&lang=ar
    Connection ? Keep-Alive
    Content-Type ? application/json; charset=UTF-8
    Date ? Fri, 27 Feb 2015 03:35:43 GMT
    Keep-Alive ? timeout=1, max=100
    Last-Modified ? Thu, 26 Feb 2015 14:43:55 GMT
    Link ? <http://72.44.81.184/~shababcapital/wp-json/posts/131>; rel="item"; title="387 Ù?اعب Ù?Ù?اعبة ضÙ?Ù? فعاÙ?Ù?ات اÙ?تدرÙ?ب اÙ?Ù?ستÙ?ر Ù?اÙ?تشاف اÙ?Ù?Ù?اÙ?ب اÙ?رÙ?اضÙ?Ø©", <http://72.44.81.184/~shababcapital/wp-json/posts/119>;
    rel="item"; title="387 Ù?اعب Ù?Ù?اعبة ضÙ?Ù? فعاÙ?Ù?ات اÙ?تدرÙ?ب اÙ?Ù?ستÙ?ر Ù?اÙ?تشاف اÙ?Ù?Ù?اÙ?ب اÙ?رÙ?اضÙ?Ø©", <http://72.44.81.184/~shababcapital/wp-json/posts/118>; rel="item";
    title="اÙ?جÙ?در Ù?ؤÙ?د استÙ?رار "اÙ?شباب Ù?اÙ?رÙ?اضة" فÙ? دعÙ? Ù?سÙ?رة اÙ?Ù?راÙ?ز اÙ?شبابÙ?Ø©", <http://72.44.81.184/~shababcapital/wp-json/posts/117>; rel="item"; title="اÙ?جÙ?در
    Ù?Ø´Ù?د بدÙ?ر اÙ?Ù?راÙ?ز اÙ?شبابÙ?Ø© فÙ? تطبÙ?Ù? رؤÙ?Ø© Ù?اصر بÙ? Ø­Ù?د فÙ? احتضاÙ? اÙ?شباب", <http://72.44.81.184/~shababcapital/wp-json/posts/55>; rel="item"; title="اÙ?جÙ?در: Ù?دفÙ?ا
    تحÙ?Ù?Ù? أفضÙ? فرص استثÙ?ارÙ?Ø© Ù?Ù?Ø£Ù?دÙ?Ø© اÙ?Ù?Ø·Ù?Ù?Ø© Ù?Ù?بارÙ? اÙ?Ù?شرÙ?ع اÙ?جدÙ?د", <http://72.44.81.184/~shababcapital/wp-json/posts/45>; rel="item"; title="اÙ?جÙ?در Ù?Ø´Ù?د بدÙ?ر
    اÙ?Ù?راÙ?ز اÙ?شبابÙ?Ø© فÙ? تطبÙ?Ù? رؤÙ?Ø© Ù?اصر بÙ? Ø­Ù?د فÙ? احتضاÙ? اÙ?شباب"
    Server ? Apache
    Transfer-Encoding ? chunked
    X-Content-Type-Options ? nosniff
    X-Pingback ? http://72.44.81.184/~shababcapital/xmlrpc.php
    X-Powered-By ? PHP/5.4.24
    X-WP-Total ? 6
    X-WP-TotalPages ? 1

    I originally downloaded it using IE and viewed the content in Fiddler.  Use this code to get the content:
    string url = "https://72.44.81.184/~shababcapital/wp-json/posts?type=news&lang=ar";
    HttpBaseProtocolFilter MyFilter = new HttpBaseProtocolFilter();
    MyFilter.IgnorableServerCertificateErrors.Add(Windows.Security.Cryptography.Certificates.ChainValidationResult.InvalidName);
    HttpClient request = new HttpClient(MyFilter);
    string response = await request.GetStringAsync(new Uri(url));
    MyContent.Text = response;
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

Maybe you are looking for