Permissions issue with iTunes folder

I just brought a new laptop and migrated all my user data over to it. When I open iTunes I get the following error:
The folder "iTunes" is on a locked disk or you do not have written permission for this folder.
How can I fix this?

James Rydings wrote:
I just brought a new laptop and migrated all my user data over to it. When I open iTunes I get the following error:
The folder "iTunes" is on a locked disk or you do not have written permission for this folder.
How can I fix this?
check if you have read & write permissions for your iTunes music folder. in finder, right-click on it and +get info+. unlock the little padlock (you may have to enter your admin password) and change the permission settings. next, click on the little gear-shaped icon and +apply to enclosed items+ like so
you may also give everyone read & write access. if this doesn't help, try the same on your iTunes folder (not just the iTunes music folder).
any help ?

Similar Messages

Issues with iTunes Media Folder resetting to default location

This is my 1st post to the Apple Support Community (the problem I have is with iTunes, but I believe it also has to do with the way OS X Lion is setup and the way Networked Drives are mounted in it) ...so I hope I've posted this to the correct place. Thank you in advance for any help I'm going to get here. I have no expirience with Mac OS X's (coming from a Windows background) so please bear with me, but I am a S/W Tester by trade so I'd like to think I'm resonably IT literate.
ISSUE:
I have a problem with iTunes and my Media Folder resetting constantly - my Setup is a MacBook Air, with an Apple Time Capsule 2TB which is providing my Wifi Network.
I want to setup iTunes so that it will permenatly point to my Data Folder on the Apple Time Capsule, so that when I download purchases, synch iPhones, or rip Music it will end up on the Apple Time Capsule and not on the MacBook Air's SDD Drive
I though I had managed to do this, but after I shut down the MacBook Air, and then logged back in to rip some music, iTunes had repointed to the MacBook Air's SDD, and all the CD's i ripped were saved there instead of the Apple Time Capsule. So far I have done the following;
STEPS CARRIED OUT SO FAR:
1) Connected the MacBook Air to the Wifi Network provided by the Apple Time Capsule - I can see the Time Capsule in the Finder app.
2) Gone to GO MENU > LOCATE SERVERS and selected the top level DATA FOLDER on the Apple Time Capsule....I believe that I've managed to create an ALIAS (Shortcut?) that points to this, and it's on my Desktop.
3) Next I went to SETTINGS > USERS > and made sure that ALIAS (Shorcut?) to the DATA FOLDER on the Apple Time Capsule is always loaded up on startup for my UserID
4) Next, I found my iTunes folder, and MOVED it from the MacBook Air SDD to the Apple Time Capsule's HDD over the Wifi Network.
5) I then went to ITUNES PREFERENCES and changed the MEDIA FOLDER it pointed to, from the MacBook Air's SDD to the one on the Apple Time Capsule.
6) Then I logged out and shut down the MacBook Air.
7) I powered on the Macbook Air, and logged in, then ripped some music - I then found that iTunes had created a new iTunes Folder for my User on the MacBooks SDD and all the CD's I ripped had been saved there. Also under the ITUNES PREFERENCES menu, it looks like iTunes had reset the location of the MEDIA FOLDER...
I don't know if this is an issue with iTunes or not - I'm assuming it's a setup issue on my part, and that maybe I haven't created a permenant link to the Apple Time Capsule as I thought I had. If it helps I was attempting to do something similar to whats described in this YouTube video; http://www.youtube.com/watch?v=mA399lEXRTE
Thanks again for any help
Regards
Codename21

Codename21 wrote:
4) Next, I found my iTunes folder, and MOVED it from the MacBook Air SDD to the Apple Time Capsule's HDD over the Wifi Network.
if you really moved your entire iTunes folder, the next step needs to be launching iTunes while holding the option (⌥) key, clicking on choose library at the prompt, and selecting the iTunes folder you moved to the TC.
as for auto-mounting the TC's disk on startup, you might find this discussion interesting.

I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,00 songs and They are all in my music folder..What can I do to fix this issue?

I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,000 songs and They are all in my music folder..What can I do to fix this issue? I've looked at all the tutorials on youtube and none of it works. I recently got a new computer and I Back-Up all my music and itunes playlist and I import it on my new computer with the new itunes and I go to play a few songs, it says I'm missing them I locate a few but it's still like 3,000 missing and again they are all on the computer and in one folder..Please Help !

I did that and nothing changed half my songs still have examination marks beside them
I also just tried dragging my folder of music int he playlist and it duplicated all of my songs? My playlist was at 5k now it's at 10k becuz of 3 duplicates of songs. Is there a way to delete multiple duplicate files?

Computer Authorization issue with iTunes 11.4

When I try to synch my IPhone 5S on Windows 8.1 / iTunes 11.4, I keep getting a message that "This computer is not authorized for the apps that are installed on our iPhone" and when I de-authorize…

Hey Ashfromsea,
Thanks for the question. I understand that you are experiencing issues with iTunes Store authorization. The following resources may provide a solution:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/ts1277
Thanks,
Matt M.

Permissions issue with OSX 10.5.8

This is likely a newbie question. I am new to OS X, but I am familiar with Linux/Unix Terminal usage.
I have a permissions issue with OSX 10.5.8.
I cannot use basic commands on the Terminal, such as mkdir, on my own home directory. I get an error message saying the operation is not permitted.
I have traced the probable culprit down to default ACL permissions settings.
So after hours of research on Google, I found out that ACL are turned on by default in OSX 10.5.8.
But I don't know how to safely use it yet, so I need help.
I'm not quite familiar with ACL, so I need to know how to add myself safely and securely to modify my home directory.
The command is with chmod. Can this also be done via the GUI?
What is the option for chmod to modify my home directory?
Is it:
*$ cd ~*
*$ chmod +a "user:john allow write" .*
*$ chmod +a "user:john allow delete" .*
Alternatively, if I use the "chmod -N ." command on the home directory, will that safely remove all ACL? Or is that recipe for a major security hole in my machine?
Thanks!

There are many people on this board that know way more than I do. Sometimes there is the tendency to copy/paste some kind of boilerplate response though, especially if there isn't quite enough information about a particular problem, so just keep trying.
You should be able to add anything you want to your user directory without the use of any ACL entries. The purpose for the *deny delete* entries on the system created folders would probably be to reduce customer service calls about "accidentally" deleting some of the folders that the system expects to be there - it does not affect creating items.
To verify that there aren't other attributes getting in the way, open the /Applications/Utilities/Terminal application, copy/paste the following command(s) into the window (there is a trailing space), drag the problem folder(s) from a Finder window to the Terminal window (this will paste the path), press return and post back with the results:
/usr/bin/who am i; /bin/ls -leO@d
These commands will display the ownership and permissions, including any ACL entries and extended attributes.
On my Leopard user folder the permissions are drwxr-xr-x+ with an ACL entry *group:everyone deny delete*. These permissions allow read/write for me, read for everyone else, and an administrator authentication will be needed to delete the folder. These are similar to what you posted earlier, so maybe there is something else going on in there.

Withh some issues with itunes I removed then reinstalled itunes. Now it tells me "We could not complete your itunes store request. An un known error occured" Anyone have this problem?

With some issues with itunes, I uninstalled then reinstalled itunes. It now Gives me the message "We could not complete your itunes store request. An unknown error occured"

"Error 42023" through "Error 42408"
These alerts might occur when trying to authorize iTunes or during launch when iTunes checks for authorization information.
Install the latest iTunes from apple.com/itunes/download/
Remove the SC Info folder.
If that does not resolve the issue, see iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3.
http://support.apple.com/kb/TS3297
http://support.apple.com/kb/TS3297Also see the applicable previous discussions listed on the right side of this page under the heading More Like This.

Issues with iTunes Match on iPhone

I am having some frustrating issues with iTunes Match and my iPhone 4 iOS 5.
1) When using cellular data (3G), the songs simply do not play from the music app. It works fine when connected to wifi.
Under settings, cellular data has been enabled for use in the music app.
2) iTunes match constantly switches off spontaneously on iPhone. I need to go back to the settings to enable it every single time I use the app.
I feel that iTunes Match was a total waste of money, considering the only reason I invested in it was to have my library accessible from my iPhone.
Any help would be much appreciated!

iTunes match doesn't work like that and if you don't like it then your best option is to turn it off and go back to syncing. However if you make sure that your device has a good Wi-Fi connection, re-downloading all your content shouldn't really be a big issue.

Issues with itunes 10.5 on Windows 7 (32 Bit) When Trying to sync iphone 4S or older

I see a lot of people out there, specifically windows OS owners (xp all the way to 7), having issues with iTunes 10.5. Here are the following issues I've encountered (some may only have one problem, others my have a combo pack of problems).
1. iphone 4S or older won't sync or backup
2. iTunes store won't open
The issue I found after using the diagnostics tool in iTunes (which is useless in identify scripting issues or major communication issues), reviewing the windows event log, and reinstalling all apple software and components, was the fact that my spyware and anti virus software was causing a communication error within apple's software. I use spyware doctor with anti virus. I had to uninstall spyware doctor in order for iTunes 10.5 to work. After that, everything worked well and I did a clean install of spyware doctor.
If the issue still persists, you might have to reset your internet protocol (TCP/IP). You have to run a command prompt as an administrator and enter the following: netsh winsock reset
Visit this Microsoft link for more info about resetting your IP: support.microsoft.com/kb/299357
Finally words: Apple, like all other software companies, continually encounter software glitches and issues because they don't test products correctly before bringing them to market- this has been a reoccurring theme for the last 2-3 years. The most important aspect of using any software should be functionality, efficiency, ease of use, and above all "A Positive End User Experience." Wasn't that Steve Job's mantra? We can all hope that Apple embraces his philosophy and vision for the many years to come. This, above all, is not a great start for Apple moving forward without their true inspirational leader.

Here is what worked for me for both 10.5 and 10.5.1 after hours of frustration with Itunes stopping and shutting down in the middle of a sync or tranferring Apps downloaded on my Ipad2 or Iphone 4:
Start iTunes in iTunes Safe Mode:
1. hold down the Shift and Control key together and click to start iTunes.
2. when you see the iTunes icon in the task bar, click on it.
3. you will get a box that says "iTunes is running in safe mode. Visual plug-ins you have installed have been termporarily disabled." [I don't know what plug-ins I installed but you should clearly see that these so-called visual plug-ins are likely the cause of your issues];
4. click Continue to open iTunes.
You could already have your device connected to your computer or do it after opening iTunes in its safe mode.
Now press your sync button and everything should work fine.
I also disabled Genius in iTunes preferences but I'm not sure if this is one of the issues causing these types of problems.
I hope this works. This may be the workaround for all of us Windows 7 64-bit folks.

How do I get rid of lip-sync issues with iTunes 10.2.2.12?

Hi Everyone.
Firstly, a very Happy Easter!
I'm having lip-sync issues with iTunes playback on my PC. The video is largely smooth with the occaisional choppiness when the CPU is made to work hard. (Playback on my iPod Touch is fine).
The system stats for my PC are at the bottom of the post.
The sound is produced through a Creative Live Sound Blaster Live! 5.1 card.
Video is through a NVIDIA Geforce 6200 with 512Mb of RAM. (All video and audio drivers are up to date).
The physical set-up is that I have iTunes installed on the C drive and my media installed on an external USB hard-drive.This isn't just a problem with 10.2.2.12 - it's been there for the last few updates.
I suppose my main questions are:
Should iTunes and my media be on the same drive? (Which would mean the external drive as I'm short on space on the C drive).
Is there some combination of settings in QuickTime that will solve this? (I've tried different combinations, but it doesn't really help).
Is the spec (below) of my PC causing any issues.
Here's an Easter Egg for anyone able to help!!
All the best
BandAidUK.
System Information
Time of this report: 4/24/2011, 10:13:44
Machine name: DEREK
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
Language: English (Regional Setting: English)
System Manufacturer: Dell Computer Corporation
System Model: Dimension 8300
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A07
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory: 3326MB RAM
Page File: 1273MB used, 3941MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
Display Devices
        Card name: NVIDIA GeForce 6200
     Manufacturer: NVIDIA
        Chip type: GeForce 6200
         DAC type: Integrated RAMDAC
       Device Key: Enum\PCI\VEN_10DE&DEV_0221&SUBSYS_02F3196E&REV_A1
   Display Memory: 512.0 MB
     Current Mode: 1280 x 1024 (32 bit) (60Hz)
          Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
      Driver Name: nv4_disp.dll
   Driver Version: 6.14.0012.6099 (English)
      DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 10/22/2010 07:23:24, 6359552 bytes
      WHQL Logo'd: Yes
WHQL Date Stamp: n/a
              VDD: n/a
         Mini VDD: nv4_mini.sys
    Mini VDD Date: 10/22/2010 07:23:24, 9623680 bytes
Device Identifier: {D7B71E3E-4161-11CF-0D6D-FF2200C2CB35}
        Vendor ID: 0x10DE
        Device ID: 0x0221
        SubSys ID: 0x02F3196E
      Revision ID: 0x00A1
      Revision ID: 0x00A1
      Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                   {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                   {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                   {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
         Registry: OK
     DDraw Status: Enabled
       D3D Status: Enabled
       AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
Sound Devices
            Description: Creative SB Live! Series
Default Sound Playback: Yes
Default Voice Playback: Yes
            Hardware ID: PCI\VEN_1102&DEV_0006&SUBSYS_10031102&REV_00
        Manufacturer ID: 1
             Product ID: 100
                   Type: WDM
            Driver Name: P16X.sys
         Driver Version: 5.12.0001.0129 (English)
      Driver Attributes: Final Retail
            WHQL Logo'd: Yes
          Date and Size: 8/14/2003 16:58:12, 1296384 bytes
            Other Files:
        Driver Provider: Creative Technology Ltd.
         HW Accel Level: Full
              Cap Flags: 0xF5F
    Min/Max Sample Rate: 8000, 96000
Static/Strm HW Mix Bufs: 64, 63
Static/Strm HW 3D Bufs: 64, 63
              HW Memory: 0
       Voice Management: No
EAX(tm) 2.0 Listen/Src: Yes, Yes
   I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
               Registry: OK
      Sound Test Result: Not run
            Description: SoundMAX Digital Audio
Default Sound Playback: No
Default Voice Playback: No
            Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_01571028&REV_02
        Manufacturer ID: 65535
             Product ID: 65535
                   Type: WDM
            Driver Name: smwdm.sys
         Driver Version: 5.12.0001.7000 (English)
      Driver Attributes: Final Retail
            WHQL Logo'd: Yes
          Date and Size: 3/22/2005 11:08:40, 260224 bytes
            Other Files:
        Driver Provider: Analog Devices
         HW Accel Level: Full
              Cap Flags: 0xF5F
    Min/Max Sample Rate: 100, 192000
Static/Strm HW Mix Bufs: 33, 32
Static/Strm HW 3D Bufs: 33, 32
              HW Memory: 0
       Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
   I3DL2(tm) Listen/Src: Yes, Yes
Sensaura(tm) ZoomFX(tm): Yes
               Registry: OK
      Sound Test Result: Not run
Sound Capture Devices
            Description: Creative SB Live! Series
Default Sound Capture: Yes
Default Voice Capture: Yes
            Driver Name: P16X.sys
         Driver Version: 5.12.0001.0129 (English)
      Driver Attributes: Final Retail
          Date and Size: 8/14/2003 16:58:12, 1296384 bytes
              Cap Flags: 0x41
           Format Flags: 0xFFF
            Description: Hauppauge WinTV 88x Audio Capture
Default Sound Capture: No
Default Voice Capture: No
            Driver Name: hcw88aud.sys
         Driver Version: 2.125.28070.0000 (English)
      Driver Attributes: Final Retail
          Date and Size: 3/12/2010 09:47:58, 13440 bytes
              Cap Flags: 0x41
           Format Flags: 0xCC0
            Description: SoundMAX Digital Audio
Default Sound Capture: No
Default Voice Capture: No
            Driver Name: smwdm.sys
         Driver Version: 5.12.0001.7000 (English)
      Driver Attributes: Final Retail
          Date and Size: 3/22/2005 11:08:40, 260224 bytes
              Cap Flags: 0x41
           Format Flags: 0xCCC
DirectMusic
        DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
     DLS Version: 1.00.0016.0002
    Acceleration: n/a
           Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
                  Creative SB Live! Series, Software (Kernel Mode), Output, DLS, Internal
                  SoundMAX Digital Audio, Software (Kernel Mode), Output, DLS, Internal
                  Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                  Creative SB Live! Synthesizer [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                  Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
                  Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                  Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
        Registry: OK
     Test Result: Not run

Select *List view* instead of *Album list view*. These are in the View menu or the boxes next to Search, on the right top of iTunes.
and the column next to it with a number in it that I have absolutely no idea what it's for. I want those two columns OUT.
In List view, you can turn off every column (in menu View > View options) except track name.

Updating Issue with iTunes 7.0.1.8

A few weeks ago I made the jump to the newly released iTunes 7.0. I had a slew of issues with this update (which by the way Apple has still not provided a working solution for), which I addressed in detail in this post: http://discussions.apple.com/thread.jspa?messageID=3170496#3170496
Today I updated to the new iTunes 7.0.1.8. There were no issues during the installation itself, however afterwards is a completely different story. When I attempt to open iTunes, I receive the following error message: "This action is only valid for products that are currently installed."
My first thought was to see if Quicktime is working normally. It is. No problem there. I thought perhaps I should try repairing the installation. So I went to Settings > Control Panel > Add/Remove Software > iTunes. I attempted to use the 'repair' option. This did not work at all.
At this point I restarted my computer and uninstalled iTunes. I restarted once again and reinstalled. When the installation had finished I received the prompt, "would you like to run iTunes after the installation is completed?" I clicked 'yes.' iTunes opened, no problem.
I closed iTunes and attempted to reopen it normally. It would not open, instead giving me the same message: "This action is only valid for products that are currently installed."
I thought the previous issues with iTunes not recognizing my iPod were bad enough but now I can't even open iTunes at all. This is absolutely unacceptable on Apple's part. It was bad enough that they released 7.0 with all its bugs, but at this point they should have their act together. Instead the problems are getting worse.
Dell Dimension 4600 Windows XP Pro

Please let me know if I can get rid of this feature.
You sure can.
iTunes View menu > Hide MiniStore will do the trick.

I have not had any issue with Itunes on my PC until recently. Every now and then my Itunes library appears on my screen? I have not clicked the itunes icon beforehand nor plugged in my Ipod Touch? Why does ths happen please. I have windows XPPOdany ic

I have not had any issue with Itunes on my PC until very recently. Every now and then my Itunes library appears on my screen? I have not clicked the itunes icon beforehand nor plugged in my Ipod Touch? Why does this happen please as it is driving me crazy!.

What's the precise text of the message, please? (There's a couple of different ones I can think of that you might be getting.)

Having issues with iTunes 11.1.5 on Windows 8.1

Ever since I've refreshed my windows computer two weeks ago. I am having issues with iTunes 11.1.5. For some reason I can access the iTunes Store, but most of the time when I do something internet related on iTunes, the app is either stuck on checking for downloads or when trying to sign in. I am trying to update all my apps but only a couple out of 30 actually start downloading but they keep getting stuck at "processing file". I have used another computer with Windows 8.1 with the same version of iTunes and its downloading app updates fine.

it works at first then after trying to update a few apps (the third one this time) iTunes again stops working and gives me the 8008 error.
Okay ... let's try seeing if that one is the root cause of the errors.
Try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting
Does that calm down the 8008s?

HT201210 The iPod "iPod" could not be restored. An unknown error occurred (1).This is my Ipod 32 GB, which is out of warranty and is 1G-A1213 and had gone kaput, after having issues with iTunes Software as it was not able to run Music on my IPod when conn

The iPod "iPod" could not be restored. An unknown error occurred (1).This is my Ipod 32 GB, which is out of warranty and is 1G-A1213 and had gone kaput, after having issues with iTunes Software as it was not able to run Music on my IPod when connected.
I have wasted my precious 2 days and nights and am lost all my hope...APPEAL TO ALL GEEKS TO RESOLVE MY ISSUE ON HUMANITARIAN GROUNDS ATLEAST WITH SOME VALID TIME OF YOURS.
All mails can be sent to [email protected]
Restore of Ipod back up is present...but is not getting restored due to some iTunes issue with playing my music files.It says restoring and extracts but failes in 1 min with the said error.

Other users and reported error 1 but I have not seen a solution.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

TS4124 i didnt have issues with itunes before. but pc asked to download new version. i did. when i click itunes i get my original music, but when i click store...i get nothing. i watched tutorial...wont open itunes store. im looking for music

i didnt have issues with itunes before...but pc asked to download new version. i did. when i click itunes i get my original music, but when i click store...i get nothing. i watched tutorial....but still cant open itunes store. im looking for music to buy.

Hello bogley
Check out the article below for troubleshooting access to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks? Don't want to download Yosemite. Not hearing good things about it.

Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks? Don't want to download Yosemite. Not hearing good things about it. I'm on Mavericks 10.9.5.

one obstacle, quickly removed. thank you.
nomenclature aside for a moment, 10.6.8 is correct but maybe more is necessary about the MacBook Pro: it is 'old': Identifier: 1.2, Intel Core Duo, 2.16 GHz, 1 Processor, L2 2 MB, RAM 2 GB.
i hope that is enough to get an answer to this: is it unadvisable to update its OS; in other words, if i update to 10.9, will the machine be able to handle it, 'speedwise'?

Permissions issue with iTunes folder

Similar Messages

Maybe you are looking for