Permissions Issues after java update...

So, I noticed after I got the java update awhile back that the permissions associated with it are wrong.
disk utility tries to repair it, claims it does, but still needs to be repaired afterwards. anybody else have this issue, so would it be normal?
I can post the output from disk utility if you guys need it.

It's normal. Not all permissions issues are ever resolved with any update. Unfortunately ever since 10.1.5 had permissions repair features, it never has 100% eradicated permissions issues. Though repairing permissions before and after each update helps, you'll never see a message that all permissions are repaired. As long as there aren't any other issues, I wouldn't worry about it.
Message was edited by: a brody

Similar Messages

Is there a fix for the wifi connectivity issue after ios6 update?

Is there a fix for the wifi connectivity issue after ios6 update?
Cannot connect to any wifi since update to 6.0.1
How do I get update to 6.0.2?
Will that even help?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Date format Issue after HRSP Update

Hi,
We are faced with a strange issue after HRSP update was applied on our client system (upgraded from SAP-KE-30 to SAP-KE-36).
There is an outgoing interface which picks up all the the starters into the local government pension scheme and updates a B2A document. This is implemented via a z-program.
When we look at the out put after the interface has run for the vast majority of employees it shows their date of birth as 21.05.1968 when it should show it as 21051968. This only appears to have happen after the HRSP's have been applied.
No modifications have been made to the z-program. What could be the reason for this issue. has anyone faced such an issue post HRSP update?
Any pointers on how to further investigate and resolve the issue will be most helpful.
Regards

Hello Iside,
In this case we can try to reload the software on the BlackBerry Smartphone to make sure it is running the latest version and there are no issues with the OS on the device.
To do this we would need to back up the BlackBerry Smartphone. Please open the BlackBerry Desktop Manager and connect your device. Click on the Backup and Restore options and select Back Up. Please note the location where the backup is being saved as we will need to access it later to restore the BlackBerry Smartphone.
Once you have backed up your BlackBerry Smartphone please follow the link below to complete a clean reload of the BlackBerry Smartphone software.
Link: http://www.blackberry.com/btsc/KB11320
Please test the date once the software is reloaded prior to restoring the backup.
Thank you
-DrP
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Doc to go issue after ipad update ios 6.0 doc to go keeps dropping can't sync MacBook Pro

Doc To Go issue after ipad update ios 6.0 doc to go keeps dropping can't sync MacBook Pro (15-inch Late 2011), Mac OS X (10.7.5), ipad iOS 6.0

Post in the iPad forum, this one is for OSX

Exchange 2010 - Issues after rollup update installation.

Exchange 2010 - Issues after rollup update installation.
We are having issues since we installed SP3 Rollup updates 1, 2, 3, and 4.
Issue1 - People get an error messages constantly popping up when they access our webmail. The error messages are:
An unexpected error occurred and your request couldn't be handled. and
Your network connection is unavailable. Please reconnect and try again.
Issue2 - When I open the Exchange Management Shell I get the following error:
Failed to connect to an Exchange server in the current site. Enter the server FQDN where you want to connect.
Issue3 - We have been using third party software to filter spam email. It is installed on our Exchange server. Since the updates it has not been working and we have tons of spam coming through. I dont think that this issue is that important at the moment and
hope that it will be fixed after resolving issues 1 and 2.
We uninstalled all four rollup updates in hopes that everything would go back to normal but it hasnt. We still have the same issues.
Currently we are running Exchange 2010 SP3 on 2008R2 SP1.
Please help.
Thanks.
Greg

Hi,
Based on the description, you got the error below when you tried to accessed OWA after rollup update installation.
"An unexpected error occurred and your request couldn't be handled, and Your network connection is unavailable. Please reconnect and try again."
For this issue, I recommend you check the OWA virtual directory to see if "Redirect requests to this destination" is checked. If it is checked, please uncheck the option. Then please restart IIS service to check the result.
Open IIS Manager -> owa -> HTTP Redirect -> uncheck "Redirect requests to this destination:"
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Elite Pro, CMSS-3D not working and other issues after driver update

DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
The only time it works is if the original drivers are installed from the installation CD.
ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
Now regardless of what drivers are installed, there?are no longer any on screen indicators.
The indicators looked like the ones that show when using the remote controller.
Anyone have any ideas?

Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
http://rapidshare.com/files/25244022/[email protected]7.254.6.0

Managed Account permissions issues after all third party updates

I run a lab with 34 student accounts that are "Managed" using 10.5.7. I have given students permission to use specific software and all aspects of the software in Accounts/Parental Controls. When I update Microsoft Office or Adobe CS4, I have to go into every single student account and into each individual program to "always allow" which is about 10 programs for each machine. Of coarse all the checkmarks in the parental controls are already checked off for the student account when I check under parental controls?
Anybody having this issue. This happens on both Intel and PowerPc's.
This happens on fresh installs of Leopard to disks that have been zeroed out, on updates from Tiger and on CC cloned machines.
I have of coarse repaired all permissions before and after the updates.
It is extrememely laborious to have to do this after small incremental updates to third party software.
Actually, I've had to do it with Safari as well. It may not just be a third party issue.
One things for certain. It is ****.
Any insight would be greatly appreciated.
Thanks

Is DW installed on a server or is it installed on a user's desktop? If it is installed on a server then it won't install properly because it is not designed to be run from a server because of licensing issues. Adobe can't allow you to use one user license and then installing on a server and so used by 100 other users.When you reply please also state your operating system.
hth

Repairing Permissions after Java Update

I installed the latest Java update as prompted by Software Update. Then I repaired permissions and am getting the same lengthy log every time even though it states "Permissions repair complete":
"Group differs on "Library/Application Support/iLifeMediaBrowser/Plug-Ins/iLMBiPhotoPlugin.ilmbplugin/Contents/Resourc es/da.lproj", should be 80, group is 0.
Repaired.....etc, etc."
There are at least 25 - 30 of those; plus there are quite a few on the Java VM framework.
Is this anything to worry about?

Yes, everybody's getting them. As long as the repair states "Permissions repair complete", you're good to go.
-mj

Some pages don't render properly after Java update for OSX 10.6.8

I can't seem to get T-mobile.com's website pages to render properly anymore. So far, this is the only website I'm having this issue with, though there could be more I'm not aware of.
I go to www.t-mobile.com and this is what I get:
I think I might be missing a plug-in, but not sure; if so, I don't know which one or how to get it.
This only started happening after the latest Java update for OSX 10.6.8, which I installed on Feb. 24, 2013. All of T-mobile's pages look like this, except if I go to www.my.t-mobile.com's home page. Then I get a normal page, but after I log in, I get more wierd rendering issues again. So here's the page that appeared normal today:
And after I log in successfully, I'm back to the wierd rendering issues again:
I was so lost but then I decided to try a work around to get my online bill and managed to get it, but I don't want to see the pages like this. So help please?

So, here's more on my point...
I put in the 3 captured screen shots in my original post above. I used Grab to copy the web pages, saved them to my desktop as .tiff files and dropped them in for others to view. This morning, I went to look at my post and instead of seeing the screen shots, I see 3 tiny blue boxes with question marks. When I left click on the boxes, nothing happens. When I right click on them, I get options that are not helpful:
Open Image in New Window
Open Image in New Tab
Download Image
Copy Image Address
Import Image
Capture Selection from Screen
Convert Selected Traditional Chinese Text (why the frack is this an option?)
Convert Selected Simplified Chinese Text (or this an option?)
I checked my Safari Preferences and I see I have checked, under Security, Enable plug-ins, Enable Java, Enable JavaScript.I have to have Java enabled to run a few things.
Did something get corrupted in Safari?
Am I'm missing some plug-ins?
How do I get them back?
I'm going to search the internet. Well, after doing the search, I still don't think I've got what I need. Thinking I might need to reinstall Safari. If this is the case, will I loose all my Bookmarks?

Open GL issue after latest updates: Missing GL version

Having issues with OpenGL after latest updates to OSX and Safari. iTunes will not display cover art and Angry Birds responds glewInit failed: Missing GL version. The is a Mac Pro with 10.7.4 and Safari 5.1.7.
Anyelse seen this? How is this fixed?

Final chapter in this saga for anyone else who experiences this.......run reparPermissions against your disks prior to upgrading. After having to rebuild the boot disk a couple of times and upgrade, had no problems with 10.7.4 but would always get Missing GL Version after Safari update. Ran DiskUtil and repaired permissions prior to Safari update and finally got it to pdate without causing GL issue.
Still working on how to not need to delete my previous backups when rebuilding machine (apparently TimeMachine always tries to create a new back sparse folder and thus may waste original space from your previous backups).
Thanks to A Brody for the suggestion about repairing disk permissions!
Edward

Warning popup for jnlp and all-permissions security, recent java update

We have a java program running with java webstart. The jnlp includes the all-permissions security level.
All jar files have a manifest with Permissions: all-permissions and all jar files are signed with our trusted certificate.
When the program is started we get a popup saying something like:
"This application will run with unrestricted access which may put your computer and personal information at risk. Run this application only if you trust the locations and publisher above."
This popup is coming _everytime_ the program is started... which is very annoying for the user and causes support issues for the organization.
This has started to happen in the recent java update. First the program did not start at all until we included the Permission attribute in every jar's manifest.
How can we get rid of this popup?
Best regards,
Emil

If we add the following to the manifest of the jar files:
Permissions: all-permission
Application-Library-Allowable-Codebase: *
Caller-Allowable-Codebase: *
It seems like the "checkbox" to only show the warning message once is back again (without those two last lines above in the manifest there is no checkbox at all).

Safari freezes when opening certain sites after java update

Since I downloaded the latest java update my computer freezes everytime I go to a website that is using javascript like Foxnews, etc. It freezes the computer. I must force quit Safari and disconnect from the internet before the computer unfreezes. It does it everytime. I have emptied the cache, repaired and verified permissions. I think I have troubleshooted everything with no luck. I can't even use firefox. Firefox now immediately goes back to the previous viewed page after it finishes loading the page I am trying to see. Very weird. All of this began after the update. Does anyone have a suggestion? Thanks.

Clearing the java caches hasn't helped me. I don't know what to do. Finally I just downloaded internet explorer. It works fine. What a shame though to have to rely on Microsoft to surf the internet on a Mac.

Issues after the update from 2.5.7 to 2.5.16

A number of issues have cropped up due to / during / after the update of the forums from 2.5.7 to 2.5.16 at the beginning of this week. This is a list of those issues as I have compiled them. It is a work in progress and I will update it when more information becomes available.
1 Username and email problems for some users. (fixed 2009-12-03)
Some users have a suffix appended to their username and their email address replaced with a random string (as a consequence email notifications don't work anymore). This problem is being worked on. Time to fix is unknown. Users experiencing this problem are requested to report so in this thread: My user handle and e-mail have been changed without my knowledge Please include your old username, which Adobe ID's you have and whether you used the same email address for those Adobe IDs.
2 Some user preferences are lost when logging in. (fixed 2009-12-03)
When you log in to the forums (either manually or automatially based on a "Remember me" cookie), some of your preferences are overwritten by their default values. The most noiceable prference is the settng to display your screen name (real name) that will get reset to displaying a username. This problem is being worked on. Time to fix is unknown.
3 The Rich Text Editor (RTE) is inserting linebreaks.
When typing a post the RTE will randomly insert linebreaks.
Workaround: remove the linebreaks manually.
4 Raw (FreeMarker?) code is inserted in some posts (through the RTE?).
In some posts code appears that was not entered by the user. The code looks something like below (but there may be much more then just this one line):
function(){return A.apply(null,[this].concat($A(arguments)))}
Workaround: edit the post and remove the code.
5 The logout button disappeared.
The logout button is no longer visible.
Workaround: How can I log out from the forums?
6 Search is down on one node. (fixed 2009-12-03)
Search is down on the SGAURWA41P cluster node. This does not show itself as an error, but instead as 0 search results.
Workaround: restart all browser windows and you may end up on another cluster node or use Google with a "site:forums.adobe.com" search modifier.
7 Users have 404 problems on first request.
This is not really a new problem, but it is something that was supposed to be fixed with the update. The problem is caused by the forums inserting a jsessionid parameter in the wrong place in the URL.
Workaround: reload the page where the incorrect link is located.
8 Image upload through camera button doesn't always work. (fixed 2009-11-30)
Some people have reported problems with uploading JPG and PNG images using the camera icon.
Workaround: attach the images instead.
Update 2009-11-28:
A probable cause for the error [The content type of this image is not allowed.] when uploading images through the camera button has been identified. Internet Explorer uploads images using a Content-Type header that differs from the IANA registered type for jpg and png images. As such, the recommended workaround for people wanting to upload images using the camera icon is to use a browser that is not Internet Explorer.

Re issue 4, "Raw (FreeMarker?) code is inserted in some posts (through the RTE?)", the suggested workaround is:
Workaround: edit the post and remove the code.
With my IE 8, the workaround never works. See this test post for an example:
http://forums.adobe.com/message/2470219

Xperia arc S LT18i - contact issues after ICS update

I've encountered an ICS problem regarding contacts. Contact search field is not functioning well when searching for a specific name..i found this problem while trying to text somebody. Contact search field wasn't accurate at all after ICS update...

Can you please elaborate on this issue? What exactly do you get when you start typing out a contact name?
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Wireless issues after kernel update

Hi,
after I updated my kernel yesterday, I've been having some issues with my wireless. I'm on a dell inspiron 1545, using kde and I use the broadcom-wl driver form the AUR.
Anyways. After I did a system update yesterday, it would refuse to load the wl module. So I recompiled the driver and that was fine. But still my laptop refuses to use its wireless card. At first I just couldn't connect to any wireless, now the networkmanager just claims that my WLAN Interface is unavailable.
the output of iwconfig:
lo no wireless extensions.
eth0 IEEE 802.11bg ESSID:"" Nickname:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Bit Rate:54 Mb/s Tx-Power:off
Retry min limit:7 RTS thr:off Fragment thr:off
Power Managementmode:All packets received
Link Quality=5/5 Signal level=0 dBm Noise level=0 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
eth1 no wireless extensions.
but if I try to run 'iwlist eth0 scan' it states:
eth0 Failed to read scan data : Invalid argument
I'm not that experienced with wireless, so I did what https://wiki.archlinux.org/index.php/Broadcom_BCM43XX says and some other pages I found on google. 'iwconfig eth0 up' doesn't have any influence.
As I said, before the upgrade it worked fine and I also had configured it as it is described in the link above.
thanks for any inputs,
tobi

litemotiv: 'lspci | grep Network' :
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
.:B:. : I guess (and hope) that's the only relevant part (at the top and bottom):
at the bottom what's that "wl taints kernel"
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
input: PC Speaker as /devices/platform/pcspkr/input/input1
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
lib80211_crypt: registered algorithm 'TKIP'
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sd 0:0:0:0: Attached scsi generic sg0 type 0
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
sr 1:0:0:0: Attached scsi generic sg1 type 5
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
uhci_hcd: USB Universal Host Controller Interface driver
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: acpi_idle registered with cpuidle
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SBTN]
ACPI: AC Adapter [AC] (off-line)
Monitor-Mwait will be used to enter C-1 state
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
wmi: Mapper loaded
uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
wl: module license 'Mixed/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
wl 0000:0c:00.0: setting latency timer to 64
usb 1-5: new high speed USB device using ehci_hcd and address 2
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
eth0: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.38
thermal LNXTHERM:00: registered as thermal_zone0
and maybe
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth1: link is not ready
start_kdeinit (3367): /proc/3367/oom_adj is deprecated, please use /proc/3367/oom_score_adj instead.
sky2 0000:09:00.0: eth1: Link is up at 100 Mbps, full duplex, flow control rx
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth1: no IPv6 routers present
tobi

Permissions Issues after java update...

Similar Messages

Maybe you are looking for