Permissions Mashup after mailing attachment
Ok, here's an odd one. Since installing SnowLeopard, I've experienced this problem.
I will commonly save a file as a PDF file from Adobe InDesign, to my desktop. I will then attached that PDF file to an email and send. Then, at a later date, I'll revise this file and attempt to save it as a PDF file on my desktop, overwriting the previous version of that file (saving by the same name).
Whenever I attempt to do this however, I receive the "Cannot save to the file "filename.pdf". You may not have permission or the file may be in use." error message. So I have to delete the file from my desktop in order to save it by it's intended name.
Now here's the kicker. This ONLY happens after the file has been attached to an email. I can save a pdf file to my desktop and overwrite it again & again, with no error. But once I attach that file to an email, it's as though the permissions to the file then change, and I can no longer re-write it again...thus the error message.
Anyone know what's going on here? Does mail change the permissions of a file if it gets attached to an email?
this is a known bug in snow leopard Mail reported by many people. (I can not reproduce it myself however). this has nothing to do with permissions on the file. somehow Mail process does not release the file after you attach it so its status is reported as busy and the system won't let you alter the file for that reason.
quitting and restarting Mail releases the file.
you can also file a bug report on the matter as this is something that should be fixed
https://bugreport.apple.com
Similar Messages
-
Email attachment filenames appear as "mail attachment".doc or "mail attachment."pdf
Hi,
I have Mac OS 10.7.5, I've synchronised my hotmail/outlook address to Mail application.
I have no issues with sending or receiving emails with attachments.
The problem I'm having is that the filename of all attachments appear as "mail attachment.doc" for Word files or as "mail.attachment.pdf" for PDF files.
1) If I log on to my hotmail account through the browser the attachments appear with the correct file name.
2) The attachment file names happen to also appear correctly on my iPhone.
3) I have other mailboxes set up in Mail application and attachment file names appear correct.
It seems to be an issue with Mail application and the hotmail/outlook account.
I would appreciate if anyone can give me some feedback on this issue.
Kind regards,
Doble KoronaPeter
Some things to try - after each step, see if it works...
Ensure that you have the latest version of the OS and Quicktime and iPhoto.
1. Repair Permissions using Disk Utility
2. Delete the com.apple.iPhoto.plist file from the home / library / preferences folder. You'll need to reset your User options afterwards.
3. Download BatchMod from
http://macchampion.com/arbysoft/
And apply it to the iPhoto Library Folder using the settings found here:
http://homepage.mac.com/toad.hall/.Pictures/Forum/BatChmod.png
(Credit to Old Toad for this one).
4. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
Regards
TD -
Hi,
im working on sending report output as mail attachment in pdf format..
but im not getting the required output,,,i.e., even after entering email addresses in the selection screen....im not getting any mail to the respective mail-ids..
im pasting the code..pls fix the problem..
pls let me know wat we have to do in SCOT transaction after executing the program....pls respond ..pls ..
TABLES : t001, "COMPANY CODE
knb1, "CUSTOMER MASTER(COMPANY CODE)
cdhdr, "CHANGE DOCUMENT HEADER
knkk, "CUSTOMER MASTER CREDIT MANAGEMENT: CONTROL AREA DATA
kna1, "GENERAL DATA IN CUSTOMER MASTER
adrc, "ADDRESSES (BUSINESS ADDRESS SERVICES)
t001s, "ACCOUNTING CLERKS
adrt, "COMMUNICATION DATA TEXT (BUSINESS ADDRESS SERVICES)
adr6. "E-MAIL ADDRESSES (BUSINESS ADDRESS SERVICES)
TABLES: itcpo, "SAPscript output interface
itcpp. "SAPscript output parameters
TYPES: BEGIN OF y_t001,
bukrs TYPE bukrs,
kkber TYPE kkber,
adrnr TYPE adrnr,
END OF y_t001.
TYPES: BEGIN OF y_cust,
p_objectid TYPE cdobjectv,
END OF y_cust.
TYPES: BEGIN OF y_knkk,
kunnr TYPE kunnr,
kkber TYPE kkber,
dtrev TYPE dtrev_cm,
nxtrv TYPE nxtrv_cm,
klimk TYPE klimk,
dbwae TYPE dbwae_cm,
END OF y_knkk.
TYPES: BEGIN OF y_customer,
kunnr TYPE kunnr,
adrnr TYPE adrnr,
END OF y_customer.
TYPES: BEGIN OF y_custo ,
kunnr TYPE kunnr,
name TYPE name1_gp,
kkber TYPE kkber,
END OF y_custo.
TYPES: BEGIN OF y_knkk1,
kunnr LIKE knkk-kunnr,
dtrev LIKE knkk-dtrev,
nxtrv LIKE knkk-nxtrv,
klimk LIKE knkk-klimk,
END OF y_knkk1.
TYPES: BEGIN OF y_report_display,
kunnr TYPE kunnr,
name TYPE name1_gp,
dtrev TYPE dtrev_cm,
nxtrv TYPE nxtrv_cm,
klimk TYPE klimk,
dbwae TYPE dbwae_cm,
END OF y_report_display.
TYPES: BEGIN OF y_adrt,
addrnumber TYPE adrnr,
comm_type TYPE ad_comm,
remark TYPE ad_remark2,
persnumber TYPE ad_persnum,
date_from TYPE ad_date_fr,
consnumber TYPE ad_consnum,
smtp_addr TYPE ad_smtpadr,
END OF y_adrt.
*TYPES : BEGIN OF y_adr6,
addrnumber TYPE ad_addrnum,
persnumber TYPE ad_persnum,
date_from TYPE ad_date_fr,
consnumber TYPE ad_consnum,
smtp_addr TYPE ad_smtpadr,
END OF y_adr6.
*TYPES: BEGIN OF y_addr,
addrnumber TYPE adrnr,
name1 TYPE ad_name1,
postcode TYPE ad_pstcd1,
city1 TYPE ad_city1,
street TYPE ad_street,
housenum TYPE ad_hsnm1,
telnum TYPE ad_tlnmbr1,
faxnum TYPE ad_fxnmbr1,
END OF y_addr.
TYPES: BEGIN OF y_custnam,
adrnr TYPE adrnr,
name2 TYPE ad_name1,
END OF y_custnam.
TYPES: BEGIN OF y_kna1,
kunnr TYPE kunnr,
adrnr TYPE adrnr,
name1 TYPE name1,
END OF y_kna1.
TYPES: BEGIN OF y_knb1,
kunnr TYPE kunnr,
bukrs TYPE bukrs,
busab TYPE busab,
END OF y_knb1.
TYPES: BEGIN OF y_clv,
dtrev TYPE dtrev_cm,
nxtrv TYPE nxtrv_cm,
klimk TYPE klimk,
END OF y_clv.
TYPES: BEGIN OF y_ccname,
sname TYPE t001s-sname,
END OF y_ccname.
*TYPES DECLARATION FOR DESIGING SCRIPT
TYPES : BEGIN OF y_adrc,
addrnumber LIKE adrc-addrnumber,
name1 LIKE adrc-name1,
post_code1 LIKE adrc-post_code1,
city1 LIKE adrc-city1,
street LIKE adrc-street,
house_num1 LIKE adrc-house_num1,
tel_number LIKE adrc-tel_number,
nation LIKE adrc-nation ,
fax_number LIKE adrc-fax_number,
country LIKE adrc-country,
END OF y_adrc.
*TO GET C1 (CUSTOMER NAME IN RUSSIAN
TYPES : BEGIN OF y_adrc1,
addrnumber LIKE adrc-addrnumber,
name1 LIKE adrc-name1,
nation LIKE adrc-nation,
END OF y_adrc1.
*TO GET C7
TYPES :BEGIN OF y_t001s,
bukrs LIKE t001s-bukrs, "Company Code
busab LIKE t001s-busab,
sname LIKE t001s-sname,
END OF y_t001s.
CONSTANTS:
c_printer LIKE itcpp-tddevice VALUE 'PRINTER',
c_true(1) TYPE c VALUE 'X',
c_1(1) TYPE n VALUE '1',
c_pdf_format(3) TYPE c VALUE 'PDF',
c_u LIKE soos1-recesc VALUE 'U',
c_recipient_name LIKE soos1-recnam VALUE 'U-',
c_english LIKE sy-langu VALUE 'E',
c_f LIKE sood1-objsns VALUE 'F',
c_int(3) TYPE c VALUE 'INT',
c_main(4) TYPE c VALUE 'ITEM',
c_main_window(4) TYPE c VALUE 'MAIN',
c_header(6) TYPE c VALUE 'HEADER',
c_minus_sign(1) TYPE c VALUE '-',
c_document_type LIKE sood-objtp VALUE 'EXT',
c_space(1) TYPE c VALUE ' '.
DATA t_result LIKE itcpp.
DATA :w_t001 TYPE t001,
w_custo TYPE y_custo,
w_knkk TYPE y_knkk,
w_cust TYPE y_cust,
w_customer TYPE y_customer,
w_report_display TYPE y_report_display,
w_addr TYPE y_addr,
w_custnam TYPE y_custnam,
w_adrt TYPE y_adrt,
w_adr6 TYPE y_adr6,
w_kna1 TYPE y_kna1,
w_knb1 TYPE y_knb1,
w_clv TYPE y_clv,
w_ccname TYPE y_ccname.
DATA: w_error_found(1) TYPE c,
w_key_date_text(30) TYPE c,
w_total(10) TYPE p DECIMALS 2,
w_htddevice LIKE itcpp-tddevice.
DATA: E_PROFILE LIKE SOPRD.
DATA: t_t001 TYPE STANDARD TABLE OF y_t001,
t_custo TYPE STANDARD TABLE OF y_custo,
t_knkk TYPE STANDARD TABLE OF y_knkk,
t_cust TYPE STANDARD TABLE OF y_cust,
t_customer TYPE STANDARD TABLE OF y_customer,
t_report_display TYPE STANDARD TABLE OF y_report_display,
t_addr TYPE STANDARD TABLE OF y_addr,
t_custnam TYPE STANDARD TABLE OF y_custnam,
t_adrt TYPE STANDARD TABLE OF y_adrt,
t_adr6 TYPE STANDARD TABLE OF y_adr6,
t_kna1 TYPE STANDARD TABLE OF y_kna1,
t_knb1 TYPE STANDARD TABLE OF y_knb1,
t_clv TYPE STANDARD TABLE OF y_clv,
t_ccname TYPE STANDARD TABLE OF y_ccname.
DATA : number LIKE spell,
amount(1000) TYPE c.
For storing error log
DATA: BEGIN OF t_error OCCURS 0,
kunnr LIKE kna1-kunnr,
comm(30) TYPE c,
END OF t_error.
For storing customer's email address
DATA: BEGIN OF t_email OCCURS 0,
smtp_addr LIKE adr6-smtp_addr,
END OF t_email.
To be used in the function to send a layout via email
DATA: t_otfdata LIKE itcoo OCCURS 0 WITH HEADER LINE,
t_htline LIKE tline OCCURS 0 WITH HEADER LINE.
DATA DECLARATIONS FOR DESIGING SCRIPT
DATA : it_t001 TYPE STANDARD TABLE OF y_t001,
wa_t001 TYPE y_t001.
DATA : it_adrc TYPE STANDARD TABLE OF y_adrc,
wa_adrc type y_adrc.
DATA : it_adrc1 TYPE STANDARD TABLE OF y_adrc1,
wa_adrc1 TYPE y_adrc1.
DATA : it_knb1 TYPE STANDARD TABLE OF y_knb1,
wa_knb1 TYPE y_knb1.
DATA : it_kna1 TYPE STANDARD TABLE OF y_kna1,
wa_kna1 TYPE y_kna1.
DATA : it_knkk TYPE STANDARD TABLE OF y_knkk,
wa_knkk TYPE y_knkk.
DATA : it_knkk1 TYPE STANDARD TABLE OF y_knkk1,
wa_knkk1 TYPE y_knkk1.
DATA : it_t001s TYPE STANDARD TABLE OF y_t001s,
wa_t001s TYPE y_t001s.
*DATA STATEMENTS FOR EMAIL ADDRESSES
DATA : it_adrt TYPE TABLE OF y_adrt,
wa_adrt TYPE y_adrt,
wa_email LIKE t_email.
*DATA : it_adr6 TYPE TABLE OF y_adr6,
wa_adr6 TYPE y_adr6,
DATA : counter TYPE i,
counter1 TYPE i,
c5 LIKE spell.
SELECTION-SCREEN BEGIN OF BLOCK clcn WITH FRAME TITLE text-200.
SELECTION-SCREEN SKIP.
PARAMETERS: p_bukrs LIKE t001-bukrs OBLIGATORY, "COMPANY CODE
p_kkber LIKE t001-kkber OBLIGATORY. "CREDIT CONTROL AREA
SELECT-OPTIONS: s_kunnr FOR knb1-kunnr OBLIGATORY, "CUSTOMER NUMBER
s_datum FOR sy-datum OBLIGATORY DEFAULT sy-datum. "DATE OF CREDIT LIMIT UPDATE
SELECTION-SCREEN SKIP.
PARAMETERS : p_simul AS CHECKBOX DEFAULT 'X'. "RUN IN SIMULATION MODE
SELECTION-SCREEN SKIP.
PARAMETERS : p_lemail LIKE adr6-smtp_addr. " EMAIL
SELECTION-SCREEN END OF BLOCK clcn.
AT SELECTION-SCREEN.
PERFORM f0100_validate_bukrs. "* For Company Code.
PERFORM f0200_validate_kkber. "* For Credit Control Area.
PERFORM f0300_validate_kunnr. "* For Customer Number
PERFORM f0400_validate_datum. "* For Date of Credit Limit Update
PERFORM f0500_validate_simul. "* For simulation mode and e-mail address
*======================================================================
START-OF-SELECTION.
PERFORM f1000_get_customer. "** COLLECT INFO FOR REPORT DISPLAY
IF p_simul is initial AND NOT P_lemail IS INITIAL.
PERFORM F1000_CHECK_GATEWAY_CONNECTION.
ENDIF.
IF p_simul IS INITIAL AND NOT p_lemail IS INITIAL.
PERFORM f3000_process_data_script USING t_report_display.
ENDIF.
END-OF-SELECTION.
IF NOT p_simul IS INITIAL.
PERFORM f2000_display_customer USING t_report_display.
ENDIF.
FORM f0100_validate_bukrs.
DATA : w_bukrs TYPE bukrs.
VALIDATION OF P_BUKRS
SELECT SINGLE bukrs
FROM t001
INTO w_bukrs
WHERE bukrs EQ p_bukrs.
IF sy-subrc NE 0.
MESSAGE e999(zf) WITH 'Invalid Company Code' p_bukrs. "(E01).
*AUTHORIZATION CHECK
AUTHORITY-CHECK OBJECT 'F_BKPF_BUK'
ID 'BUKRS' FIELD p_bukrs
ID 'ACTVT' FIELD '03'.
IF sy-subrc NE 0.
MESSAGE e999(zf) WITH 'No Authorization for company code' p_bukrs."(e06).
ENDIF.
ENDIF.
ENDFORM. " F0100_VALIDATE_BUKRS
*Eject
*& Form F0200_VALIDATE_KKBER
*-> CREDIT CONTROL AREA AUTHORITY CHECK
FOR CREDIT CONTROL AREA.
FORM f0200_validate_kkber.
DATA : w_kkber LIKE t001-kkber.
SELECT SINGLE kkber
FROM t001
INTO w_kkber
WHERE bukrs EQ p_bukrs
AND kkber EQ p_kkber.
IF sy-subrc NE 0.
MESSAGE e999(zf) WITH
'Credit Control Area' p_kkber 'not defined for Company Code' p_bukrs."(e02).
MESSAGE e999 WITH text-e02 p_kkber .
ENDIF.
ENDFORM. "F0200_VALIDATE_KKBER
*& Form F0300_VALIDATE_KUNNR
*-> CUSTOMER NUMBER AUTHORITY CHECK
FORM f0300_validate_kunnr.
VALIDATION OF S_KUNNR
DATA : w_kunnr TYPE kunnr,
w_bukrs TYPE bukrs.
IF s_kunnr IS INITIAL .
MESSAGE e999 WITH 'Enter Customer Number'(e04).
SUBMIT (sy-cprog) VIA SELECTION-SCREEN.
ENDIF.
LOOP AT s_kunnr.
CLEAR : w_kunnr,
w_bukrs.
IF NOT s_kunnr-low IS INITIAL.
SELECT SINGLE kunnr bukrs
FROM knb1 INTO (w_kunnr ,w_bukrs)
WHERE kunnr EQ s_kunnr-low
AND bukrs EQ p_bukrs.
IF sy-subrc NE 0.
MESSAGE e999(zf) WITH 'Customer S_KUNNR-LOW not defined in company code' p_bukrs."(e03).
ENDIF.
ENDIF. "if not s_kunnr-low is initial.
IF NOT s_kunnr-high IS INITIAL.
CLEAR : w_kunnr,
w_bukrs.
SELECT SINGLE kunnr bukrs
FROM knb1 INTO (w_kunnr , w_bukrs)
WHERE kunnr EQ s_kunnr-high
AND bukrs EQ p_bukrs.
IF sy-subrc NE 0.
MESSAGE e999(zf) WITH 'Customer S_KUNNR-HIGH not defined in company code' p_bukrs."(e03).
ENDIF.
ENDIF. "if not s_kunnr-high is initial.
ENDLOOP. " loop at s_kunnr
ENDFORM. " F0200_VALIDATE_KUNNR
*& Form F0400_VALIDATE_DATUM
*-> DATE OF CREDIT LIMIT UPDATE
FORM f0400_validate_datum.
IF s_kunnr IS INITIAL AND s_datum IS INITIAL.
MESSAGE e999 WITH 'Enter either Date of CL update or Customer number.'(e04).
ENDIF.
ENDFORM. "F0400_VALIDATE_DATUM
*& Form F1000_GET_CUSTOMER
text
--> p1 text
<-- p2 text
FORM f1000_get_customer .
DATA : w_kunnr LIKE knkk-kunnr,
w_kkber LIKE knkk-kkber.
IF s_datum IS NOT INITIAL.
SELECT objectid
FROM cdhdr
INTO TABLE t_cust
WHERE objectclas IN ('KLIM','DTREV','NXTRV')
AND change_ind IN ('U','I')
AND udate IN s_datum.
WHERE ( objectclas EQ 'KLIM' OR objectclas EQ 'DTREV' OR objectclas EQ 'NXTRV')
AND ( change_ind EQ 'U' OR change_ind EQ 'I')
AND udate IN s_datum .
ENDIF.
IF sy-subrc NE 0.
MESSAGE s999 WITH 'There is no data for selected period'(e07).
ELSE.
MOVE t_cust TO t_customer.
ENDIF.
SORT t_customer BY kunnr.
IF NOT t_customer[] IS INITIAL.
SELECT kunnr
kkber
dtrev
nxtrv
klimk
dbwae
FROM knkk
INTO TABLE t_knkk
FOR ALL ENTRIES IN t_customer
WHERE kunnr = t_customer-kunnr
AND kkber = p_kkber.
ELSE.
MESSAGE e999 WITH text-e07.
ENDIF.
IF sy-subrc NE 0.
ENDIF.
SORT t_knkk BY kunnr kkber.
IF NOT t_knkk[] IS INITIAL.
SELECT kunnr
name1
FROM kna1
INTO TABLE t_custo
FOR ALL ENTRIES IN t_knkk
WHERE kunnr = t_knkk-kunnr.
ENDIF.
IF sy-subrc = 0.
ENDIF.
SORT t_custo BY kunnr kkber.
LOOP AT t_custo INTO w_custo.
CLEAR w_knkk.
READ TABLE t_knkk INTO w_knkk WITH KEY kunnr = w_custo-kunnr
BINARY SEARCH.
IF sy-subrc = 0.
w_report_display-kunnr = w_custo-kunnr.
w_report_display-name = w_custo-name.
w_report_display-dtrev = w_knkk-dtrev.
w_report_display-nxtrv = w_knkk-nxtrv.
w_report_display-klimk = w_knkk-klimk.
w_report_display-dbwae = w_knkk-dbwae.
APPEND w_report_display TO t_report_display .
ENDIF.
ENDLOOP.
ENDFORM. " F1000_GET_CUSTOMER
*& Form F2000_DISPLAY_CUSTOMER
text
-->P_T_REPORT_DISPLAY text
FORM f2000_display_customer USING p_t_report_display.
DATA: no TYPE n VALUE 1.
DATA: t_data TYPE STANDARD TABLE OF y_report_display.
t_data = p_t_report_display.
DATA : w_data LIKE LINE OF t_data .
ULINE (118).
WRITE:/ sy-vline,
8 'CREDIT LIMIT CHANGE NOTIFICATION REPORT ON',
sy-datum , 118 sy-vline.
ULINE (118).
WRITE:/ sy-vline,'NO'(008) ,
10 sy-vline, 11 'CUSTOMER NUMBER',
28 sy-vline, 29 'CUSTOMER NAME', 43 sy-vline,
44 'CREDIT LIMIT VALID', 63 sy-vline ,
64 'CREDIT LIMIT AMOUNT', 85 sy-vline, 86 'CURRENCY',
95 sy-vline , 96 'Notification Status',118 sy-vline.
ULINE (118).
WRITE:/ sy-vline,43 sy-vline, 44 'FROM', 53 sy-vline,
56 'TILL', 63 sy-vline, 118 sy-vline .
ULINE (118).
LOOP AT t_data INTO w_data.
WRITE:/ sy-vline, no,
10 sy-vline, 11 w_data-kunnr ,
28 sy-vline, 29 w_data-name, 43 sy-vline, 44 w_data-dtrev,
53 sy-vline, 56 w_data-nxtrv ,63 sy-vline ,64 w_data-klimk,
85 sy-vline, 86 w_data-dbwae,
95 sy-vline , 118 sy-vline.
no = no + 1.
ULINE (118).
ENDLOOP.
ENDFORM. " F2000_DISPLAY_CUSTOMER
*& Form F3000_PROCESS_DATA_SCRIPT
text
-->P_T_REPORT_DISPLAY text
FORM f3000_process_data_script USING p_t_report_display.
DATA: t_data TYPE STANDARD TABLE OF y_report_display.
t_data = p_t_report_display.
DATA : w_data LIKE LINE OF t_data .
DATA: temp_is_negative(1) TYPE c,
temp_text(20) TYPE c,
temp_sname LIKE t001s-sname,
temp_email LIKE adr6-smtp_addr.
DATA : number LIKE spell,
amount(255) TYPE c.
PERFORM f3100_initialize_settings.
LOOP AT t_data INTO w_data.
AT NEW kunnr.
CLEAR w_error_found.
IF p_simul IS INITIAL AND NOT p_lemail IS INITIAL.
PERFORM f3300_open_form.
data: wa_t001 like line of t001
DATA : begin of wa_t001,
adrnr like t001-adrnr,
end of wa_t001.
SELECT SINGLE
adrnr FROM t001 INTO wa_t001
WHERE bukrs = p_bukrs.
DATA: BEGIN OF wa_adrc,
addrnumber LIKE adrc-addrnumber,
name1 LIKE adrc-name1,
post_code1 LIKE adrc-post_code1,
city1 LIKE adrc-city1,
street LIKE adrc-street,
house_num1 LIKE adrc-house_num1,
tel_number LIKE adrc-tel_number,
nation LIKE adrc-nation ,
fax_number LIKE adrc-fax_number,
country LIKE adrc-country,
END OF wa_adrc.
SELECT SINGLE
addrnumber
name1
post_code1
city1
street
house_num1
tel_number
nation
fax_number
country
FROM adrc
INTO corresponding fields of wa_adrc
WHERE addrnumber EQ wa_t001-adrnr AND
nation EQ ' '.
PERFORM f3700_write_form.
DATA: wa_kna1 LIKE LINE OF t_kna1,
wa_adrcc LIKE LINE OF it_adrc.
SELECT SINGLE
kunnr
adrnr FROM kna1
INTO wa_kna1
WHERE kunnr = w_data-kunnr.
IF sy-subrc EQ 0.
SELECT SINGLE
addrnumber
name1
FROM adrc
INTO wa_adrcc
WHERE addrnumber = wa_kna1-adrnr
AND nation = ' '.
ENDIF.
PERFORM f3701_write_form.
DATA : wa_knkk LIKE LINE OF t_knkk.
DATA : counter TYPE i,
counter1 TYPE i.
IF sy-subrc EQ 0.
SELECT SINGLE KUNNR
DTREV
NXTRV
KLIMK FROM KNKK INTO WA_KNKK WHERE
KUNNR EQ W_DATA-KUNNR.
ENDIF.
CALL FUNCTION 'SPELL_AMOUNT'
EXPORTING
amount = w_knkk-klimk
CURRENCY = ' '
FILLER = ' '
language = sy-langu
IMPORTING
in_words = number.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
amount = number-word.
PERFORM f3702_write_form.
DATA: wa_knb1 LIKE LINE OF t_knb1.
IF sy-subrc EQ 0.
SELECT SINGLE
busab
FROM knb1
INTO wa_knb1
WHERE kunnr = w_data-kunnr
AND bukrs = p_bukrs.
ENDIF.
DATA : wa_t001s LIKE LINE OF it_t001s.
IF sy-subrc EQ 0.
SELECT SINGLE bukrs
busab
sname
FROM t001s
INTO wa_t001s
WHERE bukrs = wa_knb1-bukrs
AND busab = wa_knb1-busab.
ENDIF.
PERFORM f3703_write_form.
PERFORM f3704_write_form.
IF counter1 < counter.
PERFORM f3705_write_form.
ENDIF.
PERFORM f3706_close_form.
ENDIF.
ENDAT.
IF w_error_found EQ c_true.
ENDIF.
AT END OF kunnr.
PERFORM F3400_WRITE_FORM USING C_TOTAL C_MAIN_WINDOW.
PERFORM F3500_CLOSE_FORM.
IF p_simul IS INITIAL AND NOT p_lemail IS INITIAL. "Email setting
PERFORM f3200_get_email_addr USING w_data-kunnr.
PERFORM f3600_send_data_via_email USING w_data-kunnr.
ENDIF.
ENDAT.
ENDLOOP.
WRITE:/ ' E-Mail is sent to the customer'.
ENDFORM. " F3000_PROCESS_DATA_SCRIPT
*& Form F3100_INITIALIZE_SETTINGS
text
--> p1 text
<-- p2 text
FORM f3100_initialize_settings .
SELECT SINGLE spld
INTO itcpo-tddest
FROM usr01
WHERE bname EQ sy-uname.
IF sy-subrc NE 0.
itcpo-tddest = 'LOCAL'.
ENDIF.
w_htddevice = c_printer.
itcpo-tddest = ''.
itcpo-tdrdidev = ''.
itcpo-tdsenddate = sy-datum.
itcpo-tdsendtime = sy-uzeit.
itcpo-tdschedule = 'IMM'.
itcpo-tdimmed = ' '.
itcpo-tdnewid = c_true. "PRINT: New spool request
itcpo-tdlifetime = c_1. "PRINT: Spool retention period
itcpo-tdgetotf = c_true.
IF p_simul IS INITIAL AND NOT p_lemail IS INITIAL. "Email setting
itcpo-tdgetotf = c_true.
ENDIF.
ENDFORM. " F3100_INITIALIZE_SETTINGS
*& Form f0500_validate_simul
text
--> p1 text
<-- p2 text
FORM f0500_validate_simul .
IF p_simul IS INITIAL AND p_lemail IS INITIAL. "Email setting
MESSAGE e999(zf) WITH 'Enter Email address'. "(e05).
ENDIF.
ENDFORM. " f0500_validate_simul
*& Form F3600_SEND_DATA_VIA_EMAIL
text
-->P_W_DATA_KUNNR text
FORM f3600_send_data_via_email USING p_w_data_kunnr.
DATA: fle1(2) TYPE p,
fle2(2) TYPE p,
off1 TYPE p,
hltlines TYPE i,
temp_filesize TYPE i,
hfeld(500) TYPE c,
header(50) TYPE c,
htabix LIKE sy-tabix,
x_sent_to_all LIKE sonv-flag.
DATA: BEGIN OF x_objcont OCCURS 0.
INCLUDE STRUCTURE soli.
INCLUDE STRUCTURE SOLISTI1.
DATA: END OF x_objcont.
DATA: BEGIN OF x_object_hd_change.
INCLUDE STRUCTURE sood1.
DATA: END OF x_object_hd_change.
DATA: BEGIN OF x_receivers OCCURS 0.
INCLUDE STRUCTURE soos1.
INCLUDE STRUCTURE SOMLRECI1.
DATA: END OF x_receivers.
DATA: BEGIN OF x_objhead OCCURS 1.
INCLUDE STRUCTURE soli.
DATA: END OF x_objhead.
**Data: begin of objpack occurs 0.
include structure SOPCKLSTI1.
**Data: end of objpack.
**Data: begin of email_data occurs 0.
include structure SODOCCHGI1.
**Data: end of email_data.
Converts the layout set to PDF format
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = c_pdf_format
IMPORTING
bin_filesize = temp_filesize
TABLES
otf = t_otfdata
lines = t_htline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc NE 0.
w_error_found = c_true.
t_error-kunnr = p_w_data_kunnr.
t_error-comm = 'Error in conversion to PDF format.'(e08).
APPEND t_error.
CLEAR t_error.
EXIT.
ENDIF.
Convert the PDF file into an internal table which to be used in the
function that will send a PDF file to a email address
DESCRIBE TABLE t_htline LINES hltlines.
DESCRIBE FIELD T_HTLINE LENGTH FLE1 IN BYTE MODE.
DESCRIBE FIELD t_htline LENGTH fle1
IN CHARACTER MODE.
DESCRIBE FIELD X_OBJCONT LENGTH FLE2 IN BYTE MODE.
DESCRIBE FIELD x_objcont LENGTH fle2
IN CHARACTER MODE.
CLEAR x_objcont.
REFRESH x_objcont.
LOOP AT t_htline.
htabix = sy-tabix.
MOVE t_htline TO hfeld+off1.
IF htabix = hltlines.
fle1 = STRLEN( t_htline ).
ENDIF.
off1 = off1 + fle1.
IF off1 GE fle2.
CLEAR x_objcont.
x_objcont = hfeld(fle2).
APPEND x_objcont.
SHIFT hfeld BY fle2 PLACES.
off1 = off1 - fle2.
ENDIF.
IF htabix = hltlines.
IF off1 GT 0.
CLEAR x_objcont.
x_objcont = hfeld(off1).
APPEND x_objcont.
ENDIF.
ENDIF.
ENDLOOP.
LOOP AT t_email.
x_receivers-receiver = t_email-smtp_addr.
x_receivers-rec_type = c_u.
APPEND x_receivers.
ENDLOOP.
x_receivers-receiver = p_lemail.
x_receivers-rec_type = c_u.
APPEND x_receivers.
DESCRIBE TABLE x_objcont LINES sy-tfill.
READ TABLE x_objcont INDEX sy-tfill.
email_data-doc_size = ( sy-tfill - 1 ) * 255 + STRLEN( x_objcont ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = sy-tfill.
objpack-doc_type = 'RAW'.
APPEND objpack.
email_data-obj_descr = 'Notification'.
APPEND email_data.
IF x_receivers[] IS NOT INITIAL.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = email_data
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
TABLES
packing_list = objpack
object_header = email_fname
contents_bin = email_text
contents_txt = x_objcont
receivers = x_receivers.
endif.
CLEAR x_objhead.
REFRESH x_objhead.
CLEAR x_object_hd_change.
x_object_hd_change-objnam = 'EMAIL'(t04).
header = 'Procter & Gamble'(t05).
x_object_hd_change-objdes = header. "Title
x_object_hd_change-objla = c_english. "Language
x_object_hd_change-objsns = c_f.
x_object_hd_change-objlen = temp_filesize.
x_object_hd_change-file_ext = c_pdf_format.
Transfer the email address to an internal table which will be used
in the function that will send a PDF file to a email address
CLEAR x_receivers.
REFRESH x_receivers.
LOOP AT t_email.
x_receivers-sndex = c_true.
x_receivers-sndpri = c_1.
x_receivers-recesc = c_u.
x_receivers-recnam = c_recipient_name.
Populate the email address of the customer
x_receivers-recextnam = t_email-smtp_addr.
x_receivers-recesc = c_english.
x_receivers-sndart = c_int.
APPEND x_receivers.
ENDLOOP.
x_receivers-sndex = c_true.
x_receivers-sndpri = c_1.
x_receivers-recesc = c_u.
x_receivers-recnam = c_recipient_name.
Populate the Local mail address
x_receivers-recextnam = p_lemail.
x_receivers-recesc = c_english.
x_receivers-sndart = c_int.
APPEND x_receivers.
Calling a SAP function to send out email with attachment of PDF file
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = x_object_hd_change
object_type = c_document_type
outbox_flag = c_true
IMPORTING
sent_to_all = x_sent_to_all
TABLES
objcont = x_objcont
objhead = x_objhead
receivers = x_receivers
EXCEPTIONS
active_user_not_exist = 1
communication_failure = 2
component_not_available = 3
folder_not_exist = 4
folder_no_authorization = 5
forwarder_not_exist = 6
note_not_exist = 7
object_not_exist = 8
object_not_sent = 9
object_no_authorization = 10
object_type_not_exist = 11
operation_no_authorization = 12
owner_not_exist = 13
parameter_error = 14
substitute_not_active = 15
substitute_not_defined = 16
system_failure = 17
too_much_receivers = 18
user_not_exist = 19
x_error = 20
OTHERS = 21.
IF sy-subrc NE 0.
w_error_found = c_true.
t_error-kunnr = p_w_data_kunnr.
t_error-comm = 'Error in sending email.'(e09).
APPEND t_error.
CLEAR t_error.
ELSEIF sy-subrc EQ 0.
COMMIT WORK.
*Transmit Mail
SUBMIT rsconn01 WITH mode = c_int
WITH output = c_space
AND RETURN.
ENDIF.
ENDFORM. " F3600_SEND_DATA_VIA_EMAIL
*& Form F3200_GET_EMAIL_ADDR
text
-->P_T_REPORT_DISPLAY text
FORM f3200_get_email_addr USING p_w_data_kunnr.
REFRESH t_customer.
REFRESH t_adrt.
REFRESH t_email.
DATA: t_data TYPE STANDARD TABLE OF y_report_display.
t_data = p_t_report_display.
DATA : w_data LIKE LINE OF t_data .Sending mail with attachment
This program will allowed you to send email with attachment.
First, specify the attachment file from your local hardisk and execute.
Next, specify the sender email address and click the send button.
report y_cr17_mail.
data method1 like sy-ucomm.
data g_user like soudnamei1.
data g_user_data like soudatai1.
data g_owner like soud-usrnam.
data g_receipients like soos1 occurs 0 with header line.
data g_document like sood4 .
data g_header like sood2.
data g_folmam like sofm2.
data g_objcnt like soli occurs 0 with header line.
data g_objhead like soli occurs 0 with header line.
data g_objpara like selc occurs 0 with header line.
data g_objparb like soop1 occurs 0 with header line.
data g_attachments like sood5 occurs 0 with header line.
data g_references like soxrl occurs 0 with header line.
data g_authority like sofa-usracc.
data g_ref_document like sood4.
data g_new_parent like soodk.
data: begin of g_files occurs 10 ,
text(4096) type c,
end of g_files.
data : fold_number(12) type c,
fold_yr(2) type c,
fold_type(3) type c.
parameters ws_file(4096) type c default 'c:\debugger.txt'.
Can me any file fromyour pc ....either xls or word or ppt etc ...
g_user-sapname = sy-uname.
call function 'SO_USER_READ_API1'
exporting
user = g_user
PREPARE_FOR_FOLDER_ACCESS = ' '
importing
user_data = g_user_data
EXCEPTIONS
USER_NOT_EXIST = 1
PARAMETER_ERROR = 2
X_ERROR = 3
OTHERS = 4
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
fold_type = g_user_data-outboxfol+0(3).
fold_yr = g_user_data-outboxfol+3(2).
fold_number = g_user_data-outboxfol+5(12).
clear g_files.
refresh : g_objcnt,
g_objhead,
g_objpara,
g_objparb,
g_receipients,
g_attachments,
g_references,
g_files.
method1 = 'SAVE'.
g_document-foltp = fold_type.
g_document-folyr = fold_yr.
g_document-folno = fold_number.
g_document-objtp = g_user_data-object_typ.
*g_document-OBJYR = '27'.
*g_document-OBJNO = '000000002365'.
*g_document-OBJNAM = 'MESSAGE'.
g_document-objdes = 'sap-img.com testing by program'.
g_document-folrg = 'O'.
*g_document-okcode = 'CHNG'.
g_document-objlen = '0'.
g_document-file_ext = 'TXT'.
g_header-objdes = 'sap-img.com testing by program'.
g_header-file_ext = 'TXT'.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = sy-uname
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header
FOLMEM_DATA =
RECEIVE_DATA =
File from the pc to send...
method1 = 'ATTCREATEFROMPC'.
g_files-text = ws_file.
append g_files.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = g_owner
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header
method1 = 'SEND'.
g_receipients-recnam = 'MK085'.
g_receipients-recesc = 'B'.
g_receipients-sndex = 'X'.
append g_receipients.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = g_owner
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header.
*-- End of Program
also try this one for background scheduling the same
Sending mail with attachment report in Background
Pay attention because its working with output list from spool converted to pdf.
=================================================================================
z_send_email_fax_global
FUNCTION-POOL z_gfaian_mail_fax. MESSAGE-ID ..
WORK TABLE AREAS
TABLES: tsp01.
INTERNAL TABLES
DATA: lt_rec_tab LIKE STANDARD TABLE OF soos1 WITH HEADER LINE,
lt_note_text LIKE STANDARD TABLE OF soli WITH HEADER LINE,
lt_attachments LIKE STANDARD TABLE OF sood5 WITH HEADER LINE.
DATA: lt_objcont LIKE STANDARD TABLE OF soli WITH HEADER LINE,
lt_objhead LIKE STANDARD TABLE OF soli WITH HEADER LINE.
DATA: pdf_format LIKE STANDARD TABLE OF tline WITH HEADER LINE.
TYPES: BEGIN OF y_files,
file(60) TYPE c,
END OF y_files.
DATA: lt_files TYPE STANDARD TABLE OF y_files WITH HEADER LINE.
DATA: l_objcont LIKE soli OCCURS 0 WITH HEADER LINE.
DATA: l_objhead LIKE soli OCCURS 0 WITH HEADER LINE.
STRUCTURES
DATA: folder_id LIKE soodk,
object_id LIKE soodk,
link_folder_id LIKE soodk,
g_document LIKE sood4,
g_header_data LIKE sood2,
g_folmem_data LIKE sofm2,
g_header_data LIKE sood2,
g_receive_data LIKE soos6,
g_ref_document LIKE sood4,
g_new_parent LIKE soodk,
l_folder_id LIKE sofdk,
v_email(50).
DATA: hd_dat like sood1.
VARIABLES
DATA: client LIKE tst01-dclient,
name LIKE tst01-dname,
objtype LIKE rststype-type,
type LIKE rststype-type.
DATA: numbytes TYPE i,
arc_idx LIKE toa_dara,
pdfspoolid LIKE tsp01-rqident,
jobname LIKE tbtcjob-jobname,
jobcount LIKE tbtcjob-jobcount,
is_otf.
DATA: outbox_flag LIKE sonv-flag VALUE X,
store_flag LIKE sonv-flag,
delete_flag LIKE sonv-flag,
owner LIKE soud-usrnam,
on LIKE sonv-flag VALUE X,
sent_to_all LIKE sonv-flag,
g_authority LIKE sofa-usracc,
w_objdes LIKE sood4-objdes.
DATA: c_file LIKE rlgrap-filename,
n_spool(6) TYPE n.
DATA: cancel.
DATA: desired_type LIKE sood-objtp,
real_type LIKE sood-objtp,
attach_type LIKE sood-objtp,
otf LIKE sood-objtp VALUE OTF, SAPscript Ausgabeformat
ali LIKE sood-objtp VALUE ALI. ABAP lists
CONSTANTS
CONSTANTS: ou_fol LIKE sofh-folrg VALUE O,
c_objtp LIKE g_document-objtp VALUE RAW,
c_file_ext LIKE g_document-file_ext VALUE TXT.
=================================================================================
z_send_email_fax2
FUNCTION z_faian_mail_fax2.
Interface local:
* IMPORTING
* REFERENCE(SRC_SPOOLID) LIKE TSP01-RQIDENT
* REFERENCE(FAX_MAIL_NUMBER) TYPE SO_NAME
* REFERENCE(HEADER_MAIL) TYPE SO_OBJ_DES
* REFERENCE(OBJECT_TYPE) TYPE SO_ESCAPE
* TABLES
* LT_BODY_EMAIL STRUCTURE SOLI
* EXCEPTIONS
* ERR_NO_ABAP_SPOOLJOB
Fist part: Verify if the spool really exists
SELECT SINGLE * FROM tsp01 WHERE rqident = src_spoolid.
IF sy-subrc NE 0.
RAISE err_no_abap_spooljob. doesnt exist
ELSE.
client = tsp01-rqclient.
name = tsp01-rqo1name.
CALL FUNCTION RSTS_GET_ATTRIBUTES
EXPORTING
authority = SP01′
client = client
name = name
part = 1
IMPORTING
type = type
objtype = objtype
EXCEPTIONS
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4
OTHERS = 5.
IF objtype(3) = OTF.
desired_type = otf.
ELSE.
desired_type = ali.
ENDIF.
CALL FUNCTION RSPO_RETURN_SPOOLJOB
EXPORTING
rqident = src_spoolid
desired_type = desired_type
IMPORTING
real_type = real_type
TABLES
buffer = l_objcont
EXCEPTIONS
no_such_job = 14
type_no_match = 94
job_contains_no_data = 54
no_permission = 21
can_not_access = 21
read_error = 54.
IF sy-subrc EQ 0.
attach_type = real_type.
ENDIF.
CALL FUNCTION SO_FOLDER_ROOT_ID_GET
EXPORTING
owner = sy-uname
region = ou_fol
IMPORTING
folder_id = l_folder_id
EXCEPTIONS
OTHERS = 5.
fill out informations about the header of the email
CLEAR: g_document.
g_document-foltp = l_folder_id-foltp.
g_document-folyr = l_folder_id-folyr.
g_document-folno = l_folder_id-folno.
g_document-objtp = c_objtp.
g_document-objdes = header_mail.
g_document-file_ext = c_file_ext.
g_header_data-objdes = header_mail.
CALL FUNCTION SO_DOCUMENT_REPOSITORY_MANAGER
EXPORTING
method = SAVE
office_user = sy-uname
IMPORTING
authority = g_authority
TABLES
objcont = lt_body_email
attachments = lt_attachments
CHANGING
document = g_document
header_data = g_header_data
EXCEPTIONS
OTHERS = 1.
folder_id-objtp = l_folder_id-foltp.
folder_id-objyr = l_folder_id-folyr.
folder_id-objno = l_folder_id-folno.
object_id-objtp = c_objtp.
object_id-objyr = g_document-objyr.
object_id-objno = g_document-objno.
link_folder_id-objtp = l_folder_id-foltp.
link_folder_id-objyr = l_folder_id-folyr.
link_folder_id-objno = l_folder_id-folno.
REFRESH lt_rec_tab.
CLEAR lt_rec_tab.
lt_rec_tab-sel = X.
lt_rec_tab-recesc = object_type. This field for FAX/MAIL
lt_rec_tab-recnam = U-.
lt_rec_tab-deliver = X.
lt_rec_tab-not_deli = X.
lt_rec_tab-read = X.
lt_rec_tab-mailstatus = E.
lt_rec_tab-adr_name = fax_mail_number.
lt_rec_tab-sortfield = fax_mail_number.
lt_rec_tab-recextnam = fax_mail_number.
lt_rec_tab-sortclass = 5′.
APPEND lt_rec_tab.
lt_rec_tab-recextnam = fax_mail_number.
lt_rec_tab-recesc = object_type.
lt_rec_tab-sndart = INT.
lt_rec_tab-sndpri = 1.
APPEND lt_rec_tab.
lt_files-file = c_file.
APPEND lt_files.
begin of insertion by faianf01
hd_dat-objdes = header_mail.
CALL FUNCTION SO_ATTACHMENT_INSERT
EXPORTING
object_id = object_id
attach_type = attach_type
object_hd_change = hd_dat
owner = sy-uname
TABLES
objcont = l_objcont
objhead = l_objhead
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
object_type_not_exist = 17
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
x_error = 1000.
IF sy-subrc > 0.
ENDIF.
end of insertion by faianf01
send email from SAPOFFICE
CALL FUNCTION SO_OBJECT_SEND
EXPORTING
folder_id = folder_id
object_id = object_id
outbox_flag = outbox_flag
link_folder_id = link_folder_id
owner = sy-uname
check_send_authority = X
TABLES
receivers = lt_rec_tab
note_text = lt_note_text
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
component_not_available = 1
folder_no_authorization = 5
folder_not_exist = 6
forwarder_not_exist = 8
object_no_authorization = 13
object_not_exist = 14
object_not_sent = 15
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
too_much_receivers = 73
user_not_exist = 35.
ENDIF.
ENDFUNCTION.
=================================================================================
z_send_email_fax
FUNCTION ZCBFS_SEND_MAIL.
Interface local:
* IMPORTING
* REFERENCE(SRC_SPOOLID) LIKE TSP01-RQIDENT
* REFERENCE(HEADER_MAIL) TYPE SO_OBJ_DES
* TABLES
* LIST_FAX_MAIL_NUMBER STRUCTURE SOLI
* EXCEPTIONS
* ERR_NO_ABAP_SPOOLJOB
DATA: vg_achou(1) TYPE n.
Fist part: Verify if the spool really exists
vg_achou = 1.
DO 60 TIMES.
SELECT SINGLE * FROM tsp01 WHERE rqident = src_spoolid.
IF sy-subrc IS INITIAL.
CLEAR vg_achou.
EXIT.
ELSE.
WAIT UP TO 1 SECONDS.
ENDIF.
ENDDO.
IF vg_achou = 1.
RAISE err_no_abap_spooljob. doesnt exist
ENDIF.
client = tsp01-rqclient.
name = tsp01-rqo1name.
CALL FUNCTION RSTS_GET_ATTRIBUTES
EXPORTING
authority = SP01′
client = client
name = name
part = 1
IMPORTING
type = type
objtype = objtype
EXCEPTIONS
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4
OTHERS = 5.
IF objtype(3) = OTF.
desired_type = otf.
ELSE.
desired_type = ali.
ENDIF.
CALL FUNCTION RSPO_RETURN_SPOOLJOB
EXPORTING
rqident = src_spoolid
desired_type = desired_type
IMPORTING
real_type = real_type
TABLES
buffer = l_objcont
EXCEPTIONS
no_such_job = 14
type_no_match = 94
job_contains_no_data = 54
no_permission = 21
can_not_access = 21
read_error = 54.
IF sy-subrc EQ 0.
attach_type = real_type.
ENDIF.
CALL FUNCTION SO_FOLDER_ROOT_ID_GET
EXPORTING
owner = sy-uname
region = ou_fol
IMPORTING
folder_id = l_folder_id
EXCEPTIONS
OTHERS = 5.
fill out informations about the header of the email
CLEAR: g_document.
g_document-foltp = l_folder_id-foltp.
g_document-folyr = l_folder_id-folyr.
g_document-folno = l_folder_id-folno.
g_document-objtp = c_objtp.
g_document-objdes = header_mail.
g_document-file_ext = c_file_ext.
g_header_data-objdes = header_mail.
CALL FUNCTION SO_DOCUMENT_REPOSITORY_MANAGER
EXPORTING
method = SAVE
office_user = sy-uname
IMPORTING
authority = g_authority
TABLES
attachments = lt_attachments
CHANGING
document = g_document
header_data = g_header_data
EXCEPTIONS
OTHERS = 1.
folder_id-objtp = l_folder_id-foltp.
folder_id-objyr = l_folder_id-folyr.
folder_id-objno = l_folder_id-folno.
object_id-objtp = c_objtp.
object_id-objyr = g_document-objyr.
object_id-objno = g_document-objno.
link_folder_id-objtp = l_folder_id-foltp.
link_folder_id-objyr = l_folder_id-folyr.
link_folder_id-objno = l_folder_id-folno.
REFRESH lt_rec_tab.
LOOP AT LIST_FAX_MAIL_NUMBER.
lt_rec_tab-recextnam = LIST_FAX_MAIL_NUMBER-LINE.
lt_rec_tab-recesc = U.
lt_rec_tab-sndart = INT.
lt_rec_tab-sndpri = 1.
APPEND lt_rec_tab.
ENDLOOP.
lt_files-file = c_file.
APPEND lt_files.
hd_dat-objdes = header_mail.
CALL FUNCTION SO_ATTACHMENT_INSERT
EXPORTING
object_id = object_id
attach_type = attach_type
object_hd_change = hd_dat
owner = sy-uname
TABLES
objcont = l_objcont
objhead = l_objhead
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
object_type_not_exist = 17
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
x_error = 1000.
IF sy-subrc > 0.
ENDIF.
send email from SAPOFFICE
CALL FUNCTION SO_OBJECT_SEND
EXPORTING
folder_id = folder_id
object_id = object_id
outbox_flag = outbox_flag
link_folder_id = link_folder_id
owner = sy-uname
TABLES
receivers = lt_rec_tab
note_text = lt_note_text
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
component_not_available = 1
folder_no_authorization = 5
folder_not_exist = 6
forwarder_not_exist = 8
object_no_authorization = 13
object_not_exist = 14
object_not_sent = 15
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
too_much_receivers = 73
user_not_exist = 35.
ENDFUNCTION.
regards,
srinivas
<b>*reward for useful answers*</b> -
How to open a PDF e-mail attachment?
How do you open a PDF e-mail attachment?
Inside your email, tap on the pdf attachment. It will first gets downloaded, after that tap on it and it will show Adobe Reader (installed on your device) as an option to open pdf file.
Thanks,
Ankit -
Mail attachment problem with IP TUNNELING
Hi
We are an Isp and we have two links separatly from two different service provider, one is for Send traffic and another one for recive traffic, we use simple Gre tunnle and configure it in our router ,the tunnel is active and everything seems works fine ,but when users want to use mail attachment like yahoo mail attachment they have problem : yahoo ask them to attach files they can browse and choose files after that when they want to finish ,the yahoo attachment page process opened and never finish it s job !!!!!!!
please help.
Thanks.
Reards Bahman mozaffariHi,
this sounds like you are having MTU problems due to the GRE overhead. You can try to fix this with the command
ip tcp adjust-mss ! f.e. 1400
on the tunnel interfaces. The riouter will intercept TCP MSS negotiation and allow only TCP segments small enough to fit through the tunnel.
Hope this helps! Please rate all posts.
Regards, Martin -
hi
Here is the code i am using for mail attachment without attachment it is working fine
package com.nihon.login;
import java.util.Properties;
import java.util.ResourceBundle;
import javax.activation.DataHandler;
import javax.activation.DataSource;
import javax.activation.FileDataSource;
import javax.mail.BodyPart;
import javax.mail.Message;
import javax.mail.Multipart;
import javax.mail.Session;
import javax.mail.Transport;
import javax.mail.internet.InternetAddress;
import javax.mail.internet.MimeBodyPart;
import javax.mail.internet.MimeMessage;
import javax.mail.internet.MimeMultipart;
import javax.mail.util.ByteArrayDataSource;
public class Mail {
* @param args
private static String host = null;
private static String from = null;
private static String to = null;
private static String subject = null;
private static String content = null;
private static String filename = "D:\\Users
entry.pdf";
public static void send(String fromAddress,String toAddress,String subject, String mailContent) throws Exception{
send(fromAddress,toAddress,null,subject,mailContent);
public static void send(String fromAddress,String toAddress, String ccAddress,String subject, String mailContent) throws Exception {
ResourceBundle rb = ResourceBundle.getBundle("com.nihon.login.Application");
MailInfo mail = new MailInfo();
mail.setMailServer(rb.getString("nihon.mail.server"));
if(fromAddress!=null){
mail.setFromAddress(fromAddress);
}else{
mail.setFromAddress(rb.getString("nihon.mail.fromID"));
host = mail.getMailServer();
// Get system properties
Properties props = System.getProperties();
// Setup mail server
props.put("mail.smtp.host", host);
// Get session
Session session = Session.getDefaultInstance(props, null);
// Define message
MimeMessage message = new MimeMessage(session);
// Set the from address
message.setFrom(new InternetAddress(mail.getFromAddress()));
// Set the to address
if(toAddress!=null)
message.addRecipient(Message.RecipientType.TO, new InternetAddress(toAddress));
if(ccAddress!=null){
message.addRecipient(Message.RecipientType.CC, new InternetAddress(ccAddress));
// Set the subject
message.setSubject(subject);
// Set the content
message.setText(mailContent);
For attachment
BodyPart messageBodyPart = new MimeBodyPart();
Multipart multipart = new MimeMultipart();
multipart.addBodyPart(messageBodyPart);
messageBodyPart = new MimeBodyPart();
DataSource source = new FileDataSource(filename);
messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName(filename);
multipart.addBodyPart(messageBodyPart);
message.setContent(multipart);
// Send message
Transport.send(message);
// Method to instantiate once
public static Mail getInstance() {
if (instance == null) {
instance = new Mail();
return new Mail();
// Construtctor
protected Mail() {
private static Mail instance = null;
But now i add some code for attachment after that i got the exception in below
javax.mail.MessagingException: IOException while sending message;
nested exception is:
java.io.IOException: No content
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:625)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at com.nihon.login.Mail.send(Mail.java:104)
at com.nihon.login.Mail.send(Mail.java:47)
at com.nihon.login.Mailsender.sendMail(Mailsender.java:47)
at com.nihon.login.Mailsender.attributeAdded(Mailsender.java:19)
at org.apache.catalina.session.StandardSession.setAttribute(StandardSession.java:1334)
at org.apache.catalina.session.StandardSession.setAttribute(StandardSession.java:1243)
at org.apache.catalina.session.StandardSessionFacade.setAttribute(StandardSessionFacade.java:130)
at com.nihon.track.OnsitePlacement.doProcessRequest(OnsitePlacement.java:347)
at com.nihon.track.OnsitePlacement.doPost(OnsitePlacement.java:420)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:210)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:870)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
at java.lang.Thread.run(Unknown Source)
How can i solve this problem.
Thanks in advance.......If the message is in an Exchange server, you can access it with JavaMail
and extract the attachment. See the JavaMail FAQ and the many sample
programs that come with JavaMail.
If the message is in Outlook's message store on your desktop machine,
it's harder. You need a JavaMail "message store provider" that understands
the message store format used by Outlook on your local disk. JavaMail
doesn't come with such a provider, but you might find one in the Third
Party Products list on the JavaMail web page. -
Hello we have problem with mail after we got the new update Ios6 for Ipad3, Mail attachment can't read all info when receiving in xcl document dates show 0000.All IPad 3 don't work. Please any one have the same problem?Or any fix available.Thanks.Saca61
Mike,
I have the exact same problem. I have tried deleting mail messages but still can't seem to find the appropriate one to delete because the message number does not seem to correspond to Apple Mail's numbering system. Have you had any luck with this?
[email protected] -
XLS as MAIL attachment....points Guranteed
I am sending one xls file as mail attachment.
The following code is sending the mail pefectly, but the attchment appears with a different icon, not as xls icon in the attchment, as it normaly does if we use so00 for sending a xls attchment thorugh mail.
If i download the xls attchment in local pc after opening the mail, it does open with Excel application, but if double click on it in the mail itself, its not opening in normal text format in sap text-editor in read only mode, not as xls file.I suspect something is wrong...here is the code..please let me know about your suggestion..
For Max, and those who answered my last question, i will reward point to deserving answer after this post.. i got disconnected while surfing...sory for the delay.
REPORT ZEMAIL_ATTACH .
TABLES: ekko.
PARAMETERS: p_email TYPE somlreci1-receiver
DEFAULT '[email protected]'.
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM data_retrieval.
Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Example .xls documnet attachment'
'XLS'
'filename'
changing gd_error
gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
UP TO 10 ROWS
FROM ekpo
INTO TABLE it_ekpo.
ENDFORM. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
FORM build_xls_data_table.
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
con_tab TYPE x VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
wa_charekpo-aedat wa_charekpo-matnr
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
endform. " POPULATE_EMAIL_MESSAGE_BODYSorry for a mistake...this the code..i was talking about
REPORT ztest3.
E-mail an Abap report *
DATA : w_name TYPE sos04-l_adr_name.
SELECT-OPTIONS :
Recipient address
s_name FOR w_name DEFAULT sy-uname NO INTERVALS.
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
START-OF-SELECTION.
E-mail Abap report
PERFORM CREATE_XLS_FILE_DATA.
PERFORM f_send_mail.
Form f_send_mail
FORM f_send_mail.
Data Declaration
DATA:
l_datum(10),
ls_docdata TYPE sodocchgi1,
lt_objpack TYPE TABLE OF sopcklsti1 WITH HEADER LINE,
lt_objhead TYPE TABLE OF solisti1 WITH HEADER LINE,
lt_objtxt TYPE TABLE OF solisti1 WITH HEADER LINE,
lt_objbin TYPE TABLE OF solisti1 WITH HEADER LINE,
lt_reclist TYPE TABLE OF somlreci1 WITH HEADER LINE,
l_tab_lines TYPE i,
l_att_type LIKE soodk-objtp.
WRITE sy-datum TO l_datum.
NOTE: Creation of attachment is finished yet.
For your report, the attachment should be placed into table
objtxt for plain text or
objbin for binary content.
Now create the message and send the document.
Create Message Body
Title and Description
ls_docdata-obj_name = 'Sample Records From Ekpo in XLS Format'.
CONCATENATE 'Sample Records From Ekpo' 'In XLS FORMAT'
into ls_docdata-obj_descr SEPARATED BY space.
Main Text
lt_objtxt = 'Sample Records From Ekpo in XLS Format'. "#EC *
APPEND lt_objtxt.
Write Packing List (Main)
DESCRIBE TABLE lt_objtxt LINES l_tab_lines.
READ TABLE lt_objtxt INDEX l_tab_lines.
ls_docdata-doc_size = ( l_tab_lines - 1 ) * 255 + STRLEN( lt_objtxt ).
CLEAR lt_objpack-transf_bin.
lt_objpack-head_start = 1.
lt_objpack-head_num = 0.
lt_objpack-body_start = 1.
lt_objpack-body_num = l_tab_lines.
lt_objpack-doc_type = 'RAW'.
APPEND lt_objpack.
Create Message Attachment
Write Packing List (Attachment)
LT_OBJHEAD = 'TEST.XLS'.
APPEND LT_OBJHEAD.
DESCRIBE TABLE it_attach LINES l_tab_lines.
READ TABLE it_attach INDEX l_tab_lines.
lt_objpack-doc_size = l_tab_lines * 255.
lt_objpack-transf_bin = 'X'.
lt_objpack-head_start = 1.
lt_objpack-head_num = 1.
lt_objpack-body_start = 1.
lt_objpack-body_num = l_tab_lines.
lt_objpack-doc_type = 'RAW'.
lt_objpack-obj_name = 'ATTACHMENT'.
lt_objpack-obj_descr = 'TEST.XLS'. "#EC *
APPEND lt_objpack.
Create receiver list
LOOP AT s_name.
lt_reclist-receiver = s_name-low.
lt_reclist-rec_type = 'B'.
APPEND lt_reclist.
ENDLOOP.
Send Message
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = ls_docdata
put_in_outbox = ''
TABLES
packing_list = lt_objpack
object_header = lt_objhead
contents_bin = it_attach
contents_txt = lt_objtxt
receivers = lt_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc = 0.
Document sent
MESSAGE ID 'SO' TYPE 'S' NUMBER '022'.
ELSE.
Document <&> could not be sent
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH ls_docdata-obj_name.
ENDIF.
ENDFORM. " F_SEND_MAIL
*& Form CREATE_XLS_FILE_DATA
form CREATE_XLS_FILE_DATA .
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
con_tab TYPE x VALUE '09'. "OK for non Unicode
SELECT ebeln ebelp aedat matnr
UP TO 10 ROWS
FROM ekpo
INTO TABLE it_ekpo.
" DATA_RETRIEVAL
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
wa_charekpo-aedat wa_charekpo-matnr
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
ENDLOOP.
" BUILD_XLS_DATA_TABLE
endform. " CREATE_XLS_FILE_DATA -
Broken hyperlinks after mailing
Trying to email a PDF with hyperlinks (converted PowerPoint document) that won't break. I've selected every relevant check box as applicable (Attach source file, Add Links, etc.) in Conversion Settings. Even tried creating a folder on receiver's desktop and saving all relevant files there to check hyperlinked files. Also tried updating every hyperlink "Execute Action" within Acrobat Pro and deleting original links created from noted PowerPoint document. Regardless of what I try, the links after mailing never work. It's ridicullous for what you spend on ACrobat Pro software. Can someone please help!
Do you know what PDF viewer is being used when the links don't work?
-
Open Mail attachment in new window.
hi,
i want to open a mail attachment using new window (in IE). here i am able to manage to create the new window and viewing the contents but the problem is the new window is opening before the 'open', 'save' or 'cancel' dialog box is coming.
Currently in my JSP i am calling
<a href="<%= sformUrl %> target="newwindow"><%= name %></a>
this will open a window immediately and dialog box will come after that. if i select 'save', the new window get closed.
i want the new window to open only if i select open.
Can anybody help me?Renjith_Mathew wrote:
thx for the reply. if i remove the target attribute, attachment will open in default applications like .txt in notepad etc. But here the problem is if try to open the html or unknown filetypes, browser will try to open it in current window and my current page over writes.Doesn´t happen here. Definately a client side setting.
i dont want this becoz my web application is secured one and back/forward buttons wont work so my session will expire. What is it, "becoz"? Please write full words out. This forum is also visited by non-English-natives.
So i want to open the html attachment and unknown file types in new window only if i am selecting 'open'. (new window should appear only if i am clicking 'open')That´s not possible with HTML. Best what you can do is to specify the target only when the file´s content type is HTML and live with it. -
Missing +x perm error after changed Dovecot partition-default
failed: Permission denied (euid=214(_dovecot) egid=6(mail) missing +x perm: /Volumes/PEGASUS, dir owned by 0:0 mode=0770)
This after I changed the imap:partition-default location to a directory on an external volume.
I reviewed permission on the default location of the Server OS volume. Used chown and chgrp to match user and group permissions.
The server works when I revert imap:partion-default to /Library/Server/Mail/Data/mail
What is the "missing +x perm"? and the command to apply it?
I'm thinking I need to "touch" the directory but need clarification.Started fresh. I recreated a directory at the root of the external volume. I created this directory as sudo via CLI. Set the permissions as _dovecot:mail with 775.
Then I stopped Mail service via CLI. Then updated my config to point to the new directory via CLI. Then started Mail service via CLI. Verified mail_location using doveconf -n command. It was pointing to the new location. Then initiated IMAP reception of email.
Same error message. Error occurs when mail attempts to initialize the user's mail directory: (I changed identity details within the snippet)
imap(pid 75337 user myuser): Error: user myuser: Initialization failed: Initializing mail storage from mail_location setting failed: stat(/Volumes/PEGASUS/mailarchive/mail/6622A4BF-F9FE-4F8D-8EBB-9D080FF614FD) failed: Permission denied (euid=214(_dovecot) egid=6(mail) missing +x perm: /Volumes/PEGASUS, dir owned by 0:0 mode=0770)
Jan 22 14:09:30 server.myclient.com log[75283]: imap(pid 75337 user myuser): Error: Invalid user settings. Refer to server log for more information.
So then I stop mail service and change the config's mail_location to original installation default (/Library/Server/Mail/Data/mail) and no permissions errors -- incoming mail goes into the user's mail folder.
Is the error specific to the volume /PEGASUS? and thus initialization cannot traverse the path -- gets stuck at the volume?
Mountain Lion Server 10.8.2 First time using Mail service. -
How to run 2 reports to send 1 PDF e-mail attachment instead of 2 e-mails.
I used 9i Reports to create 2 reports in a PDF format. I run these reports from a 9i form using the web.show_document command. XML is used to send the 2 e-mails with the reports.
Is there a way I can combine the running of the reports to make one PDF to created 1 e-mail attachment or run the reports at the same time and attach 2 PDF files to 1 e-mail.
I have no problems running 1 report and sending 1 e-mail attacment!
This is example of the XML used in creating the e-mail:
- <destinations>
- <foreach>
- <file id="Test" name="REPORT_1.pdf" format="pdf" instance="XXXX">
<include src="report" />
</file>
</foreach>
- <!-- Send a mail with an attachment
-->
- <mail id="ex1" to="&DESNAME" from="&DESNAME" subject="&DESNAME;*;&p_postal_number: was submitted for
approval on &p_postal_date">
<body srcType="text">This is to notify you of a new submission that requires an approval before being
sent to out. Please use the URL link below to review the information as soon as possible.
https://xxxx.aaaa.sss.com:234/web_html/static.html AAAA Administrator</body>
- <attach format="pdf" name="Report_1&.pdf" srcType="report">
<include src="mainSection" />
</attach>
</mail>
</destinations>You can use iText to combine two PDF files into one.
-
How to open Mail attachment in different spaces
With Snow Leopard Mail attachment stopped to open in the space to witch I assigned the related application, but keep on opening in the Mail space.
I have Mail assigned to space #1 and, for example, iWork assigned to space #3. With Leopard iWork attachments opened correctly in space #3, whereas with its successor they open in space #1.
I didn't find any option to set this right.
Besides spaces has not worked right since Mac OS X 10.6.0. It happens that even when I open documents from the Finder they open in the wrong space.
Is there any way to make it work fine, as it did with Mac OS 10.5?
Thanks a lot!
Dariotarget="_blank" did not work.
The attachment does not open directly. In other words, i do not use href.
The link is having an onclick event, which in turns calls the struts Action class and the response is returned as an attachment.
<a href="#" onclick="javascript:openAttachment(this.value)" value="123">And the value is unique id with which I can find to file to be downloaded.
Again the file I cannot access directly. I get it as byte array, which I put it in to my response. -
Error while opening PDF in mail attachment
Hi All,
In smartform i am sending a mail with attachemnt as PDF file,there is one more option like preview of smartform .
issue is like i am able to see the preview of the same record but when it is sent in mail attachement,and while opening PDF its showing error that file can not be open it is corrupted.
Please help.
Mona Singh.Dear Sandra
That was my problem: binary data was incorrectly converted (often because of Unicode systems).
I returned
bin_filesize = v_len_in
bin_file = l_binfile
from the function module CONVERT_OTF, then converted the xstring data (l_binfile) into an internal table (t_objbin) to send to the mail send function with the following function module:
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = l_binfile
IMPORTING
output_length = v_lines_bin
TABLES
binary_tab = t_objbin.
Many thanks for your help.
Best regards
Patricia -
Mail attachment with UDF in SAP PI 7.1
Hello,
I need to reproduce this solution in PI 7.1
/people/samuel.chandrasekaran2/blog/2008/10/06/xi-mail-adapter-dynamically-building-attachment-and-message-body-content-using-a-simple-udf
It is about adding lines of a message as an attachment to a mail.
The UDF works for all elements except the lines for the attachment itself.
In order to build the content of the attachment (for this particular requirement) they are using a global variable declared and initialized in the global sections.
But the button for the Java Section to use an imported archive is no longer available in PI.....
So how to solve that issue?
I tried to use a graphical variable instead of a global variable but I have no idea how to add the n lines
from the source message as one import object into the UDF via that graphical variable.
Your ideas are very appreciated!
Best Regards
DirkHi,
yes, it is a little bit different. This is the issue.....
But I am not sure if your links will help:
1) /people/william.li/blog/2008/02/13/sap-pi-71-mapping-enhancements-series-using-graphical-variable
is about a different solution. I do not need to count the number of lines of the source message.
And the second variable is about concat line by line from unbound node to unbound node.
My issue is:
Souce:
Message line (0...unbound) ! ! ! ! ! ! ! !
. ResultLine (1..1)
Mapping:
=> ResultLine1
ResultLine2
ResultLine........ => into UDF to an element (1..1) in one mapping operation.
So that all "ResultLine"s are included.
The result is explained in the given link for Mail attachment with UDF.
So I am not sure how to use this thread for my issue.
In the comments of that blog Christoph Gerber writes that the new variable feature can only handle single values.
So it is not suitable for my purposes as I have a list of values here that needs to be moved into the target message field.
2) http://wiki.sdn.sap.com/wiki/display/Java/UsingEditJavaSectioninMessageMapping
shows where to find the button "Java section" which is not available here in 7.1
3) /people/sap.user72/blog/2005/10/01/xi-new-features-in-sp14
too is about the nice little button for Java Section that is no longer existing on PI 7.1 screen for mappings.
So my issue is: How to replace the Java section function with global variables in PI 7.1?
Best regards
Dirk
Maybe you are looking for
-
In Standard Report Of ALV How Can Set PF Status.
In Standard Report Of ALV How Can Set PF Status. Thanking in anticipation.
-
We are planning to upgrade from Tux 6.5 to Tux 8.1. But I learnt that Tux 8.1 support ends on Feb 2010. So, I wanted to know the impact of having runtime license only.
-
HT4864 How to change email name after account is already created
I already have an email account but I want to change the email name, not the name on the account. Is it possible to change the email name?
-
Constructor behaviour via INSERT SQL
Interestingly, using an object constructor itself as the insert value seems to have overheads, with the constructor being called multiple times for instantiating the single same object. Cannot recall seeing this documented. Here's an example (on 11.2
-
SQL1119N A connection to or activation of database "DEV"
Hello All, am Gautam Poddar from PwC, Kolkata. I have talked with you just now. We have activated the logretain and userexit on after taking the full ofline backup of the system. We were unable to take the online backup, so log directory was full. So