Permissions needed to use the 'Record and playback' feature
What level of permissions is needed to use this feature, on the ES workbench.
Cheers,
i'm not the admin of the server, but one of the users that was created gives the following message when I try and start the feature.
'you must possess the 'Process Recording Read/Delete.' permissiosn in order to....'
I was looking for a reference to the list of permissions in LC. I did not see if in the docs.
Similar Messages
-
Creating submixes and using the Bus and Send features...
I'm unfamiliar with creating a submix.
I know that I want to create 2 groups of vocals ( 6 tracks left and 6 tracks right, stereo image) to simulate a choir. I also know that I want to create a submix of 10 tracks of drums down to 2 tracks stereo.
Where can I find a good resource of information to learn and accomplish this. So far, my experimenting hasn't worked for me. I'll keep trying...but, I couldn't find anything in the Logic Express Tutorial either. I've checked into the Mac Pro Video series and couldn't find any detailed instruction there either. Maybe I was looking in the wrong volumes?
Well, I imagine it's not too difficult and I'm probably missing a simple little step...but any help will be greatly appreciated... -- Andy+1) I went through each drum track (Inside Kick, Outside Kick, Top Snare, Bottom Snare, Hi-Hat,+
+Overhead Left, Overhead Right, Tom 1, etc.) and clicked "BUS 3" for each of them from the+
+"SEND", then I...+
No. Sends are irrelevant here. The output should be set to Bus 3 on all your individual drum tracks.
+3) A new track called "Output 3&4". That is what I believe will be my destination track (the stereo+
+drum mix).+
No again. The destination is Bus 3. You need a bus object 3 to be in either your mixer and/or arrange page. That's what will capture your individual drum outputs. And Bus object 3 output should be set to Output 1-2
Sooooo... the ONLY drum-related track with an output of 1-2 should be the bus 3 itself.
+And can I create a track "Output 3&4" for the drums?+
Why do you want to? Presumably the rest of your song is going to Out 1-2, so you want the drums to also go to your mix bus, which is 1-2
Hope this helps. -
How do I use the counter and digital signals of the 6071E while it is connected to SCXI modules?
I am contemplating using a PCI 6071E with SCXI. We have the boards (6071E), we would need the cable (I suppose SH1006868) and the SCXI system. I would like to know how would you access the counter and digital line capabilities of the board. I will be using a SCXI-1314 with a SCXI-1520 Module for strain measurements but will need to use the counter and digital lines of the board as well. Can this be done? If so, how and/or what else do I need?
I think this KnowledgeBase will answer the question for you.
Accessing DAQ Board Counter Pins with an SCXI System
Otis
Training and Certification
Product Support Engineer
National Instruments -
The US Food and Drug Administration uses an authoring browser-based system for creating SPL files called XForms. According to the FDA, the only version of Firefox which is compatible is version 2.0.0.13. The current version of Firefox 3 does not work with the plugin (Mozilla XForms 0.8.5 Add-on).
No need to use the unsupported and insecure Firefox 2, you can use XForms version 0.8.7 with Firefox 3.6, available from https://addons.mozilla.org/firefox/addon/mozilla-xforms/
-
Hello, thanks in advance for your help. I recorded a panel presentation on an ipod and would like to edit the audio recording to just one portion of the recording. I was able to import the audio into my itunes 11.1.3 music library but I have not been able to edit the length of the recording. I followed an online tutorial and was able to edit when the recording starts and stops on the recording but I haven't been able to edit out the parts of the recording that I dont want. Also when I try to export it to my Desktop or to Garageband (not sure if that helps or not) I am not able to export it. It is currently a .WAV file. I would like to edit the length of the recording and then export the file onto my desktop. I would like to email the presentations to my colleagues online so I could also use advice on how to make it a smaller file since it is current 945.6 MB.
iTunes isn't an editor. You need an app that's intended for editing audio files, like Adobe Audition (http://www.adobe.com/products/audition.html) or Audacity (free in the App Store).
-
Monitor, Recorder, and Playback Program using ddns
Maybe I'm missing something, but I cannot setup the WVC54GCA monitor program to find a remote camera using the assigned (via TZO) URL. The setup functions allow only a place for IP address, not URL. If I find the current (dynamic) IP address for the remote camera, and plug that in, everything works fine, but when the IP address is changed, I will need to re-enter the new address. Kinda defeats the purpose of using TZO.
I called tech support, and after 1/2 hour, I realized that they had no idea what I was talking about. A specialist promised to call me back, but that did not happen. I think Linksys, who otherwise makes good products, should reconsider overseas tech support. It never works! Just blowin-off some steam here....
Anyone have any idea how I can solve this or what am I doing wrong?
Thanks,
Anthony
Solved!
Go to Solution.Sorry if my question was not clear. I'll try to re-state it.
The ddns service is working remotely as it should. No problems accessing, viewing, or setting-up the camera remotely using my assigned URL.
My problem is with the recording software utility ONLY. The software only works if I put in the camera's web IP address because it only has an input field for IP address NOT URL in the Utilities setup window.
i.e. I cannot type in xxxxx.mylinksys.comort number as I would need to in order to use the recording utility.
Thanks in advance,
Anthony -
I recently updated and restored my Iphone on a Mac. My music was erased, therefore, I am trying to sync all of the music from my computer into the iPhone, but it says that I need to use the original computer/itunes in order to sync, but it is the same computer and iTunes account. The error reads: The iPhone, "Name" is synced with another iTunes library. Do you want to erase this iPhone and a sync with this iTunes library? If I click "Erase and Sync," will it delete my contacts, apps, etc?
The following may help: iOS: Device not recognized in iTunes for Windows
-
I need to take a picture of a web page, insert it onto a powerpoint online, and crop the picture. I am pressing the print screen button, and right cliking paste. But I am getting the warning message saying that my browser can not use the clipboard, and I am unsure of how to take a picture, then paste it, and crop it all on to a power point.
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
-
I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. I don't need the caps/lock or ctrl key. Due to a brain injury my daughter can only use her left hand to type. She also uses a text to speech app to verbalize all of her needs since her speech isn't intelligible any longer either. And her vision was significantly affected also, so the keyboard has to be mounted about 6 inches from her face. So to reach across the keyboard with her left hand to the right side delete and enter button is physically difficult and causes typing errors, which cause people to not understand what shes trying to say.
The best keyboard so far is the Zagg folio mini. I just had to make stickers to enlarge the letters on the key buttons.
Does anyone know how I can reprogram these two keys? Or where I can buy a wireless mini keyboard for Ipad made for lefthanders with these two functions on the left side. I have searched for days and days. It's sooooo important to me that she be able to contribute her voice again. Imagine if you got in a car accident and couldn't speak clearly any longer, but understood everything still. Thanks for any help and suggestions you all take the time to share with me. I really appreciate the kindness of strangers to help me help my daughter.
Sami's momSami\'s mom wrote:
I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini.
You cannot. -
I have a macbook pro with 10.6.8 on it but I need to do a clean re install and my CD is 10.4.6. Can I use the CD and then are my OS updates to 10.6.8 free?
Also can I use iMac OS install disks on a MacBookPro?You will have to buy Snow Leopard:
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order. You also should find it at your local Apple retailers.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements. -
In the icloud settings, I am told I need to accept the terms and conditions to use icloud. However, when I click on "Terms and conditions", I get a message "unable to connect to server". This has been happening for a week now since I upgraded to iOS 7.06. There is no problem with my wifi or cellular connectivity, all other applications work perfectly. P.S.I have never used icloud before, but wish to do so now. How do I overcome this problem?
Have you turned the iPad off then back on? That often helps with problems.
-
I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this mac
Instead of getting a wireless card for the Mac Pro, you might want to consider getting an 802.11ac wireless bridge device that would enable you to connect more than one device to it by Ethernet cable and to eventually take advantage of the faster 802.11ac wireless standard.
-
The Adobe Photoshop CC 2014 - I can't use becouse is LOOCK DOWN the computer -
When USE is LOCK the computer so everything is LOCKING can't even move the mouse + need to restart the computer and use Photoshop CC 64 bit instead - have this problem for about 6 months ...Please read this (in particular the section titled "Supply pertinent information for quicker answers"):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325
Are you trying to use a 32bit version (I did not even know there is one for Photoshop CC 2014)?
If so – why? -
In the numbers app, using the "date and time" function, is it possible to remove the time? I need to put together a list of dates, but I don't need or want times.
When formatting your column to date/time, pick Date & time, and then pick the letter i in the circle to the right. Then scroll down and pick "No time"
Jason -
my charger stopped charging says I need to use the original charger which I am Verizon says Samsung is aware of this and is working on it
Try using these directions on this link: http://support.apple.com/kb/HT1926 or http://support.apple.com/kb/HT1923
This resolved my issue with the new update on Vista.
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Maybe you are looking for
-
I want to use the SDK just for compilation (for development, we'll use Flash Builder). There's something in the license text (http://www.adobe.com/products/eulas/pdfs/adobe_flex_software_development_kit_combined_2010 0101_1530.pdf) that surprises me:
-
Validating phone numbers using Yaromat
Hello folks: I am very new in this forum. Can you please tell me how I can use Yaromat to validate phone numbers? I see that it validates dates, email, text fields, numeric etc.... but how about phone numbers? Please help. Thanks Akani Akani
-
Run/deploy on device (Asus eepad)
Hi I want to deploy/run/debug to an Asus eePad but it is not listed as a connected device. I am using FB 4.5.1 and the tablet is running Android 3.1 and Air 2.6.0.1912 USB debugging is on and connected. I am using on OSX. could anyone offer a hint as
-
Benefits Confirmation statement
Hello - Is there a way to have 2 Benefit confirmation letters active and available in SAP at one time? Possibly one for active employee's and a separate one for retired employee's who still receive benefits from the company? Thanks!
-
Hello, The problem: This is a calculator type of script and I am going nowhere... I want to convert the grade, example A,A+,B,B+into a numeric form. Like A+ is equivalent to 4 and the conversion appear automatically. I have to input a credit and it a