Permissions problem after adding 2nd hard drive and putting user home there

I added a 2nd drive and put my user home on this. The reset password tip from command line at startup never sees this new volume, so I have been having to add my user to most files manually. Almost everything works now except iMovie. When I try to import it says I probably cannot write to the events.localize folder. I have tried symbolic links, manually editing the permissions, etc. no luck. Any ideas?

ill try the fsck right now
heres the output you requested
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 7.3G 3.9G 3.0G 57% /
none 505M 120K 505M 1% /dev
none 505M 0 505M 0% /dev/shm
/dev/sda1 99M 12M 83M 12% /boot
/dev/sdb1 38G 93M 38G 1% /home
total 46G 4.0G 42G 9%
thats interesting.
/dev/sda3 is showing its old values almost like something in the partition tables didn't get updated?
Last edited by =OTS=G-Man (2009-12-09 06:19:55)

Similar Messages

Power Mac G4 Won't Boot after Installing 2nd Hard Drive and Additional RAM

Hello. I am using a Power Mac G4 (PCI graphics) that I bought a few weeks ago. It was working perfectly fine until I tried to add an additional hard drive and add more RAM to the machine. After I closed the case and plugged it back in, it won't start up at all. No sound, no lights, nothing spinning, nothing. I removed the added hard drive and RAM, but it still refuses to start. I don't know what happened. Hopefully it's not a logic board failure or anything else equally bad.

Welcome to Apple Discussions!
The PowerMac G4 PCI forum is over here:
http://discussions.apple.com/forum.jspa?forumID=586
I'll ask a moderator to move your thread. Try replacing the clock battery, and hitting the CUDAS switch.

Permissions problems after installing new hard drive

I backed up my old hard drive with SuperDuper!, then installed a new hard drive. When I tried to install my backup on the new hard drive with Disk Utility, it would work fine and then hang. It wouldn't finish, even overnight. So I installed a clean copy of leopard on the new hard drive, and then used Migration Assistant to move everything over from my backup. Worked great, until I actually tried to use the computer. Tons of permissions issues, mail and address book wouldn't run, Skype won't run even after installing an upgraded version, etc. What's weird, is my main account is an administrator account, but logging on as root and trying to remove admin permissions from my main account, the checkbox is greyed out! I also don't have a UID 501 on the system. I'm 502, and my wife's account is 503. I can't fix permissions from the finder, and in certain cases can't get them changed in terminal logged in as root. I don't know how to get my data from my old hard drive (which is running 10.5.1) to my new hard drive (also 10.5.1) Please help me! Thanks.

Hey Shawn,
Have you looked at the permissions with "Get Info"? Are they listed as belonging to "unkown user"?
First of all, see the Apple doc <href="http://docs.info.apple.com/article.html?artnum=306876">Administator user changed to standard.
After you clear that up, you'll probably have to remove the "unkown user" and add your user as the owner of all your folders. During that process, finder will probably crash. At that point, try running <a href="http://discussions.apple.com/thread.jspa?messageID=5670342#5670342>this terminal command described in "mlaster's" second posting.
Good luck!
CMF

[Solved] Strange free space after adding 2nd hard drive

Hello,
Im pretty new to linux but am learning pretty fast, fast enough that I needed to install a second hard drive.
Every thing went well, got the new drive in and mounted to /home and moved all my old /home to the new drive. After all that I went to delete the old /home on hda resize the / partition to use the rest of the drive.
I used gParted 0.5.0 and booted from their live CD and did the deed. BUT now drive hda (40GB drive) shows that / is taking 36.92GB, when it was originally using about 4GB on the original 7GB / partition.
I ran the disk usage tool and..well
1) It shoes that I'm using 4GB of 40GB
2) Only shows that I have 44GB available when I have 2 40GB Drives installed.
can someone tell me whats going on here?
to recap
Originally the 1 drive was laid out as
/boot - 100MB
swap - 260MB
/ - ~7GB
/home - remainder of drive
then I (wanted to) changed it to
[sda]
/boot - 100MB
SWAP - 260MB
/ - Remainder of drive
[sdb]
/home - 40GB
Thank you for any help.
I have attached the screen shots
Last edited by =OTS=G-Man (2009-12-10 06:02:03)

ill try the fsck right now
heres the output you requested
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 7.3G 3.9G 3.0G 57% /
none 505M 120K 505M 1% /dev
none 505M 0 505M 0% /dev/shm
/dev/sda1 99M 12M 83M 12% /boot
/dev/sdb1 38G 93M 38G 1% /home
total 46G 4.0G 42G 9%
thats interesting.
/dev/sda3 is showing its old values almost like something in the partition tables didn't get updated?
Last edited by =OTS=G-Man (2009-12-09 06:19:55)

Dv7 3085dx won't power on after adding 2nd hard drive

I'm attempting to add a 2nd drive to my laptop (dv7 3085dx). The drive is a Seagate Momentus 750GB drive (ST9750420AS). I purchased the drive caddy and connector from Newmodeus. The laptop will not power on after the drive is installed in the 2nd bay. Everything is fine if the drive is disconneted.
Any ideas?

Are you absolutely sure you got the right caddy and cable from newmodeus? They sell several different ones for the dv7 series and they look similar but are not compatible with each other. I understand the reluctance to try hot-plugging it.

Why can I not update Pages, Garage Band, Numbers and Keynote after changing my hard drive and reloading Maverick?

I cannot download the updates for Pages, Keynote, Numbers and Garage Band after changing my hard drive and reinstalling Maveric - can any one help?

Are the programs in your Applications folder? Did you purchase them from the App Store or do you have an iWork DVD?

I had Itunes installed on 2nd hard drive and it crashed

I had ITunes installed on 2nd hard drive and it crashed. I tried to install a new copy of ITunes and it keeps looking for the ITunes that was on the one that crashed. How do I keep ITunes install package from looking for the old install.

No reason to. I always a cloned copy of my operating systems so I can reclone it back in case the the one I use dies.

I cannot get my iTunes library from my old computer to my new one. The old computer is so messed up that I cannot even get google to open. I tried to copy to an external hard drive and the music was there until I went to upload to the new computer.

I cannot get my iTunes library/music from my old computer to my new one. The old computer is so messed up that I cannot even open a browser.I tried to copy to an external hard drive and the music was there until I went to upload to the new computer. I disconnected my old computer so I will have to reconnect it I am sure. thank you for any help. Last time I transferred I used a product I purchased. That was a long time ago.

First of all make sure that you've definitely backed up the movies to your external hard disc.
In iMovie click on any event you don't want, go to the file menu and select 'move event to trash'. Then do the same for any unwanted projects - 'move project to trash'. Quit out of iMovie and empty the trash.
Hope that helps!

HT1751 I copied my old itunes library from my pc on to a external hard drive and put it on my laptop. How do i merge it with my current itunes account on my laptop?

I copied my old itunes account on my pc to an external hard drive and put it on my laptop. How do i merge my old itunes with my current account on my laptop?
Thanks

Tunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library.
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list (e.g., ringtones), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple notes it is your responsibility to back up your purchases.
Select the store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can re-download your available previous purchases.

I need help with migration....i need to take movies off 1 hard drive and put into another then into my iPad

I need help taking movies off of 1 hard drive and putting into another....then putting into my ipad

Drag them from one hard drive then drop them onto the other. Then you must import them into iTunes in order to sync them to your iPad.

How do I extract my music files from a evternal hard drive and put them on my itunes?

how do I extract my music files from a evternal hard drive and put them on my itunes?

If you used the Finder to move the files, iMovie will have lost track of them. iMovie holds the locations of the Event files, and Project files contain references to those locations. If you move the files, iMovie has no way of knowing where they are.
If you can, first move all the files back to their original locations. Plug in the external drive. Open iMovie and move the files in iMovie's interface (help explains how, but basically, just drag and drop in the event pane).
Then you can connect the drive to the new computer, and iMovie will see them.

Added 2nd Hard Drive - Which Format Do I Select?

I just added a 2nd hard drive. It shows up in disk utility. I know I must format it before I can use it. But, there are 6 choices in the Volume format drop down: Mac OS Extended (Journaled), Mac OS Extended , Mac OS Extended case - sensitive journaled, Mac OS Extended case - sensitive, MS-DOS file system, UNIX File System. Is there some information on the Apple site that explains these 6 formats?
G5 2.3 dual Mac OS X (10.4.6) Which is best to use?
G5 2.3 dual Mac OS X (10.4.6)
G5 2.3 dual Mac OS X (10.4.6)

Actually, when I have had a drive with problems like bad blocks, I find Intech Speedtool ZoneBench to show up problems the best. It also includes ability with another part of the suite to map out bad blocks (never found any) but I did have to do a 7-way erase with one drive that kept having problems.
An entire 4GB area went from normal 56MB/sec down to 31-33MB/sec - either partition off that area, or just realize it has this problem with longer seeks (the time to go from inline to spare sector - some SCSI drives locate spares on the same track to reduce seeks.
ZoneBench can be set to a 511MB test file, and can test 60? areas per volume, so you can force read/write to over 33%.
The most important areas of a drive that cannot have any bad blocks are the areas that are not part of user allocated space, partition tables, directory (maybe) and the area of the journal file.
If it solved a problem 1% of the time or less, would vendors include it in their "how to setup a drive for end users"?

Playlists Missing After Install New Hard Drive and Upgrade to Win 7

My computer needed a new hard drive and I upgraded from Win Vista Home Premium to Windows 7 Home Premium.
I am trying to get my Playlists back for my iTunes in my "Administrator" user account, after reinstalling iTunes and putting my music libraries back onto my computer.
(I had installed 32-bit Win7 OS myself, computer worked OK for about 1 day, then would not boot up; I took computer to shop, they said I needed new Hard Drive, and I gave them my new Win7 OS computer disks)
I am confused over whether I have 32-bit OS or 64-bit OS. They recommended installing 32-bit OS, I agreed, and believed that I had 32-bit OS installed; however, Computer / System Properties state "System type: 64-bit Operating System"
Prior to my installing Win7, I backed up the following onto my Western Digital "My Passport Essential Portable Hard Drive:"
("My Administrative Account"): Users / Owner / My Music
and
("My User Account"): Users / Yank / My Music
My "Administrative" and "User" user accounts contain different songs in iTunes.
If helpful, I could describe what is in each of these 2 backed-up music folders.
To get started, I copied both my "Owner" and "Yank" user folders in the C: User folder; however now I have "Owner," "Yank," and "Yank.Owner-Toshiba" folders in the C: User folder. I think I did this by creating a new Yank user account by creating a new account, not by my copying a folder into C: User folder. The Owner folder has a picture of a lock on the folder icon.
Because I had trouble merging My Music folders in the Owner folder, and I was confused, I copied everything that was in the Owner folder into a new folder in the Owner folder, "NEW OWNER FOLDER." I also copied my Owner Music folder into several places in my Users / Owner folder.
I also ended up changing the "iTunes Media folder location" several times, using iTunes "Edit / Preferences / Advanced tab / change "iTunes Media folder location". When I chose "Reset," it shows "C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes\iTunes Media"
I've also played around with "Edit / Preferences / Advanced tab / 'Keep iTunes Media folder organized' "
When I open my iTunes, I have no playlists.
However, when I went to my "Yank" user account and opened iTunes for the first time, the playlists associated with that account were visible.
How do I get my playlists back on my Administrative Account, which is my main song collection and had many, many playlists?
Thank you.

YAY!
I didn't try shift-start of iTunes, but I DID GET MY PLAYLISTS BACK BY FOLLOWING YOUR OTHER ADVICE:
I went to my external hard drive, went to my backup at Users / Owner / My Music / iTunes / and searched for library.itl
Four files with that name were found, with different dates.
I chose the most recent, dated just a few days before I made my backup to the external hard drive.
I copied it to my computer's hard drive into the following location:
C:\Users\Owner\NEW OWNER FOLDER\Music\iTunes
which overwrote the file which was located there.
When I opened iTunes, ALL MY WONDERFUL PLAYLISTS WERE THERE!
THANK YOU SO MUCH FOR SOLVING THIS FOR ME!
CAN YOU IMAGINE HOW DISAPPOINTED I FELT WHEN I BELIEVED THAT I HAD LOST ALL OF THE PLAYLISTS WHICH I HAD CREATED OVER THE YEARS? Many of my playlists were composed of whole albums whose songs I had added to iTunes.
THANK YOU AGAIN SO MUCH!

IPhoto events and pictures missing from iPhoto after restoring new hard drive and upgrade to iLife11

My iPhoto events and pictures are ALL missing from my iPhoto Library after I tried restoring my programs on a new hard drive AND upgrading to iLife11! Over the last few months, I upgraded my 2008 Macbook Pro's hard drive from a 250 GB to a 500 GB hard drive and since then have been manually installing and restoring programs and software. I decided to do things manually because I had problems with doing Time Machine backups/restores in the past, so before I upgraded the drive, I manually saved everything to a Western Digital MyStudio 1 TB hard drive that I had just for the purposes of a second back up. Anyway, I tried importing the pictures onto the new library, but couldn't find the hard copies at first, so that didn't work. I then tried deleting the iPhoto Library that came with new operating system, then copying my old backup onto the new hard drive...that didn't work either. However, when I right clicked on the iPhoto Library icon on my external hard drive (the original) and clicked on "show package contents," the folder not only contained the originals, but they were still organized by year and event just as I had them originally!
So, then I thought "why don't I try just importing the pictures directly into the new iPhoto Library!"
I tested it out, and sure enough, it worked! I then tried importing an entire folder (which, was actually the name of the event), and again it worked! So, I literally clicked and dragged my entire 2007-2009 library of pictures (which was about 35 GB) back into my iPhoto Library! AND, this only took about 30 minutes to download, enough time for me to write this post and the following instructions to Recap:
          1. Open your new iPhoto Library
          2. Go to wherever your ORIGINAL iPhoto Library is saved/backed up, then Right-click (or Control click) on the iPhoto icon
          3. Click on "Show Package Contents"
          4. Go to the folder called "Originals" or "Master"
          5. Click and drag everything INSIDE the folder (not the folder itself) to your new iPhoto Library
          6. DO NOT try Importing from inside iPhoto! For some reaseon, iPhoto can't see these images, but I promise, they're there!
I assume this could work on other iLife programs, but luckily I have MobileMe and my iCalendar updated itself, though I did have to do some tweeking...
Hope this helps other people out, GOOD LUCK!

I'm re-posting the answer to this problem so I can show it has been answered:
Open your new iPhoto Library
Go to wherever your ORIGINAL iPhoto Library is saved/backed up, then Right-click (or Control click) on the iPhoto icon
Click on "Show Package Contents"
Go to the folder called "Originals" or "Master"
Click and drag everything INSIDE the folder (not the folder itself) to your new iPhoto Library
DO NOT try Importing from inside iPhoto! For some reason, iPhoto can't see these images, but I promise, they're there!
          GOOD LUCK!!!

'09 MacBook Pro won't start up after installing new hard drive and restoring from an external hard drive.

I am in the process of replacing my hard drive and have run into a problem. I reinstalled OSX 10.6.3 using a DVD I bought off Amazon. That went well and I then restored my hard drive using an external and Time Machine.
After that, things still looked good but I couldn't log in to my user (and access my MacBook) because my password wasn't working even though my hint was correct. Yes, I am POSITIVE my password was correct; I even tried a couple other passwords to humor myself. I then gave up and decided to restart the computer.
Now my MacBook won't start up at all. It goes o a gray screen with a still loading symbol for a couple minutes and then goes to a solid light blue screen. I've tried starting up while holding command+R and I tied holding just command and neither worked.
Did I install the wrong OSX because I didn't use the same DVD that came with the laptop? Is there something wrong with my hard drive already?
Please help =[

You probably bought the wrong RAM that has different pin assignments, so it won't fit in the slot. Return it.
I bought 4GB Memory online for my MacBook, so I could get it to run twice as fast.
Doubling the memory does not make your computer run twice as fast.

Permissions problem after adding 2nd hard drive and putting user home there

Similar Messages

Maybe you are looking for