Permissions problem with Battery 2

This is the story so far....
When trying to install a music application,(Battery 2 to use as a plug-in inside Logic 6) an error message appears: "You do not have sufficent access privaleges for this installation". After much forum seraches the general advice is that i should fix permissions in disk utility...However,
In disk utility the fix permissions tab is consantly greyed out and so i cant do this.
I have two hardrives, one that came instaled with my mac, and which i use for my applications and to where i am trying to install Battery 2, and one HD that i use for Audio only that i installed. I can fix permissions for the Audio only hardrive, as the tab is not greyed out.
What is going on?
People have suggested that this may be related to why i cannot install my Battery 2 software.
I have never had a problem installing any software though!
John

Not sure I understand your question about the placement of the library. I've always understood that the "library" is the files located in the Music Folder. Anyway...glad you got it working. I was thinking that if you had your songs stored on a different drive -- not on your hard drive -- that perhaps somehow permissions for the external drive had gotten messed up. Again...glad it's working now.

Similar Messages

  • Problem with battery for MacBook Pro 2007

    I have a problem with battery that was replaced during video card service 1.5 years ago
    Battery health was around 80% and it stopped to work, I continued to use notebook with power cable and after week the battery become like this!
    spoke with person in Apple store and got answer that it is not covered by Apple and I will need to buy another new battery.
    For me it looks like manufacturing problem and I'm not expecting that after 1 year my battery will die like this! Thanks that it didn't explode!
    What I should do in such case?

    Thanks for your reply!
    All my battery story is ending with bad taste...
    I always relied on quality of the Apple products, it brought me to change all computers and phones to Apple brand. I was ready to pay extra for their products...
    This battery has an Apple brand on it and I'm expecting that Apple will take some responsibility for it.
    First battery on my MacBook Pro 2007 worked without any problem for 4 years, then it was replaced by Apple service tech person for unknown reason. This "new" battery failed just after ending of 1 year warranty coverage and even deformed in such scarry way. And now I don't have any option to ask if there is possibility that I'm experience a manufacturing defect! And I know that it is possible, internet is full of negative comments for these batteries!
    Now I'm asking myself again, if it worst to buy Apple products? Are these products have proper quality?

  • I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or atleast maintain the charg over longer periods of time? I have a dc adapter. thanks

    I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or at least maintain the charge over longer periods of time? I have a dc adapter. thanks

    You should be able to use the battery if you get a car type charger which recharges mobile devices.
    The full size iPads use a 10-12W charger, whereas the mini uses a 5W charger. Many car chargers only supply 5W. But at 5W, the car charger should give you some extra time on your iPad. It would be best to use a 10-12W car charger.
     Cheers, Tom

  • I bought i pad 3 in canada 4 months ago but i think it's got problem with battery .i live in germany i don't know where to send it

    i bought i pad 3 in canada 4 months ago but i think it's got problem with battery .i live in germany i don't know where to send it

    Not quite what I heard when I went into the Apple Store in Hong Kong yesterday.
    I have just bought an iPad in Hong Kong but will eventually be travelling back to the UK.
    Louis in the Apple Store told me that iPads without cellular have international warranty but those with cellular do not (as there are slightly different models for different carriers).
    But he was pretty cagey and essentially couldn't give a clear, straightforward answer. Which most Apple employees can't.
    It is now a grey area, at the discrection of each local Apple Store & is subject, it seems, to you paying the import duty as a possible get out clause.
    Look carefully but do tell us if you got this iPad reapired. Thanks.

  • Problems with battery life on idea Tab A2109A

    I have retuned my idea pad twice to lenovo for repair due to long battery charge time and short battery life, received it back yesterday,charged it, downloaded my kobo library,around 10 minutes this morning it is now 55% wifi.bluetooth tec was switched off. have any other users had problems with battery life.(lenovo support say that it should run for 10 hrs on wifi dependant on what you are doing.) 
    Any help would be appreciated.
    Bob

    hi fireguy1957,
    Welcome to the Forums.
    Can you try to:
    1. Ensure there's no recent apps running on the background
    2. Turn off wifi, bluetooth, adjust brightness to minimum
    3. Turn off automatic system updates under Settings > About Tablet > System Update > Auto Check Interval
    4. Navigate to Settings > Apps > Running Tab and stop the process that you don't need to squeeze out more juice on that battery.
    After you made the changes above, run the application that you use and observe the tablet.
    Hope this helps
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Hello I want to say that apple iphone 5 even has problems with battery consumption. Charge my phone in the morning and sometimes I do not get to the full day. If they could fix this problem I would appreciate. I hope answers.

    Hello I want to say that apple iphone 5 even has problems with battery consumption. Charge my phone in the morning and sometimes I do not get to the full day. If they could fix this problem I would appreciate. I hope answers

    Hello!
    I recently just downloaded the 'Waze' app as a backup for my Garmin. I've read a few reviews that seem to rant and rave about how good the GPS app is. It is community driven and maps are constantly being updated by users. Plus it has a few other fun stuff in it (something similar to Gasbuddy where you can owe prices on the map). But like the person above me said, there is lots of useful free GPS apps in the App Store.
    Oh and I may be wrong but I remember reading an article about Google being slower about updating its maps system--ie no turn by turn voice, which many people have had complaints about.
    Happy Searching!
    Ps - if you switch I wouldn't go to Blackberry.

  • New air problem with battery after upgrade to 10.6.5

    Hi List.
    I bought new air about month ago. Everything was working like a charm.
    2 days ago I did macos upgrade and I have big problem with battery performance. Only 2 hours of working after full charging. I decided to downgrade system to 10.6.4 and problem's gone.
    Is there something wrong with 10.6.5 on new air?

    Hi,
    I dont think there is something wrong with 10.6.5 simply because I have no problem with it
    Since battery management is one of the SMCs, resetting it may solve the issue.
    http://support.apple.com/kb/HT3964?viewlocale=en_US
    Welcome to Apple Discussions!
    Cheers.

  • Problem with battery running down more quickly after downloading OS6 to 3GS iPhone

    Problem with battery running down more quickly after I downloaded OS6 to 3GS iPhone.

    gdgmacguy
    I guess I should have asked for the "definitive" fix. I read several "fixes" but it seems no one knows if Apple has a definitive fix. Kind of like going into an Apple store and getting three different answers from three different reps. At least they are not rude and no, I don't have a problem searching the forum.
    <Edited by Host>

  • Problem with battery life on 6.2.1

    Since the update for IOS 6.2.1 about 4 days ago, I have noticed deteriorated battery life from the prior version.  As a workaround I have tried to reset my phone and reset all email information as recommended.  Updated settings to prevent push notifications, removed notifications and many other functions that were not causing me problems before, but to no avail. 
    Within 15 minutes of my phone being disconnected from the charger, the battery life decreases by 5-7% with the phone idle (Screen off).
    Has anyone else encountered this and have you been able to correct the issue?
    Thank you!

    Hi BK, I updated my iPhone, my iPad and my iPod Touch and my batteries are draining like water.  I am a school teacher and usually when I leave work at 4:30pm, my iPhone is at 74 to 76%  Today I had to charge my phone 4 times at work because it kept on draining.  My iPad is even worse, when I get home, my baterry is always at 97 to 98%. Today, I needed to use my iPad at work and from 100% at 9:00am it was completely dead at 2:30pm with no usage.  I was shocked!  I called Apple and they said that they are not aware of any problems with battery life and this update.  I went to Best Buy and the Geek Squad toldme that it is a very well known problem.  They are the ones that told me that the Apple boards was full of complaints regarding this issue.  So I called Apple again, and they continue to tell me that it must be my device.  Really?  All of my devices, my coworkers, my father's, my sister's are all having the same problem and they won't own up to it.  This update was supposed to improve battery life and instead, we got a nightmare.  Please fix this now!

  • Problem with Battery and Keyboard Light

    First off, sorry if this is in the wrong section. This is my first time on these forums.
    Just today I was skyping my girlfriend on my Macbook Pro (that I got in the summer or 2010). I have SmcFanControl installed and I regularly use it to monitor/increase my fan speed. As I regularly skype and play WoW on this computer, my computer temp often sits around 160-170 degrees F.
    Today it was at around 170 and I had it on my lap. I sat up and jostled the computer a little and it shut off. The power cord light, which was green, immediately turned off. I tried unplugging it and plugging it back in and it stayed off. The computer wouldnt restart for about 30 seconds. Finally after hitting the power button several times it turned on.
    It worked fine for 10 or so minutes. I assumed I just moved it too suddenly, although I have never had a problem with that before. Then, I moved again and it shut off AGAIN. It took another 30 seconds to register the power cord and to turn on.
    This time, when it booted up, it said my clock was set to a date before 2008, althought it was still at Feb 16, 2011. Also, as soon as I turned it on, the fans were going full speed (as loud as when i have SmcFanControl set at 6200 rpm). I opened SmcFancontrol and it says my computer's temp is at 32 Degrees F and 000 rpm, which I know is not correct. I can't change the speed of the fans and the temp of the computer hasnt changed at all.
    Also, my battery icon has an X through it and says "No batteries available" "Power Source: Power Adapter." The green light is very dim on the charger.
    AND on top of this, my keyboard lights no longer turn on, even pushing F5 and F6. I am in a dim room so they should auto turn on.
    I am afraid that I may have overheated the computer, but I was wondering if anyone has any advice. I was thinking of opening the back up but I dont have a small enough screwdriver at the momment. I also tried doing the "top -u -s3" command to check cpu% and my highest one is Firefox around 10-15%.
    Any help would be appreciated. I'm thinking this is gonna require a look at the Apple Store, however I am an out of state college student and I'm not returning home for another week and I need my computer for assignments.
    Sorry for the wall of text. Thanks in advance.
    P.S. My computer is up to date.

    SMC reset works best with anything that relies on power for the machine. When it comes to batteries SMC reset and PRAM usually do the trick. Also a lot of people miss this, do not plug on the top plugs use the lower plug.
    As for the temperature on the lap, expect a lot of heat, the computers are designed to lay on flat SOLID surfaces. The underbelly on aluminum chassis laptops act as a heatsink. In addition the rubber feet keep the product high enough so air can pass through and help cool the system.
    As far as the adapter you can have AppleCare send you without waiting a week for it. If it is an obvious hardware problem they may do an exception for you if you are out of phone support. Highly recommend APP for the phone support. You would have a battery on it's way to your current location in a couple days!

  • Doesn't work wi-fi. Problems with battery.

    Doesn't work wi-fi. Battery is too bad, i charge my phone 2 times per day. Before problems with wi-fi battery was normal.

    please, give me old bios installer

  • Weird problems with battery

    Hi guys,
    I having some weird problems with my new battery. I changed the old battery (that died) for a brand new one. The first problem was: the mac didn't recognized the new battery in a macbook pro 13 early 2011. So, I putted the battery in a another macbook pro 13 mid 2010 and worked. So, I passed the battery again to macbook early 2011 and worked fine. I thought this very weird, but it is ok. The big problem came after: about two or three days of regular use, the mac just didn't turn on (I'm sure the battery charge was full). Even the battery charge button didn't work, like as the battery didn't stay there. However, if I shake the mac, something happen and the battery start to work normally. few minutes after (around 15 minutes), the mac shut down immediately, like as someone disconnect the battery from MB. If I shake the mac, the same thing happen again, few minutes after the mac turn off. The other strange fact is: if I open the mac, disconnect and reconnect the cable of battery (that connect with MB), the mac start work properly and 2 or 3 days after the problem go back.
    Anyone has a clue?
    I'm not confident about a bad contact problem of the cable with the MB, because the problem is repeated with some regularity of days (ever 2 or 3 days after connect the cable to MB).
    I guess could be a problem in the logic board of the battery... What do you think could be? If the problem is because the logic board, is there a solution?
    Thanks

    Call Apple and get them to take a look at it, you've done all the 'customer troubleshooting' you can ...

  • Permissions problem with external HD

    Prior to updating to 10.4.3, I was able to write to any external HD to transfer large files betweek my iBook and a windows PC. After upgrading, I am no long able to use 3 out of the 4 external HDs that I used to be able to. I always get an error message stating a problem with permissions. I get info on the drive and it says read only and will not allow me to change to read and write. I plug the same drive into my Windows PC and change the permissions to read and write, and get the same message when I go back to my iBook, I get the same read only problem.
    Any ideas?

    Eric,
    I, too, apologize for the delay in posting. I have been away from the discussions for a rather extended period.
    Well, any NTFS formatted volume will only be accessible to you as read only. No, this is not something new, but has always been the case. To make matters worse, I have heard that Windows no longer provides any way to create a FAT-32 volume; one must use OS X to format the volume or use a third-party application in Windows. This information may be incorrect, but I wouldn't be surprised if it is true (we're talking about Microsoft, here).
    If you can copy any data on this drive to some other location, then use Disk Utility to format it as FAT-32, the data can then be copied back and it can be used to transport the data cross-platform, with read/write access on both ends. Is this a possibility for you?
    Scott

  • Sony Liveview problem with battery drain!Help

    Please help, i have just bought Liveview, i charged full for 4h, when i connected, battery drain very fast in 3 - 4 minutes when i use plugins after that Liveview turn off?? Please help me how to fix ít, i can't use ít , i think it have a problem with firmware! I use Xperia ion ics 4.0.4

    If the battery is only lasting 10 mins I would advise returning this particular device so that it may be assessed.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • [PX6-300D] Access permissions problem with shares

    Hello,
    Let me explain the problems.
    When i try to connect one share to PC by mapping network device everything is normal - we have access to the storage and so on, but when i try to simply type the \\address\share in explorer i'm receiving "\\address\share is not accessible" popup window.
    Strange here is that i can access the \\storageDevice but i can't access the \\storagedevice\Sharename
    With lot of clicking and editing accounts in px6 i didn't received results, but i tried to increase the security for local network encryption to Always and voila i received access to the share and 15 minutes later i loss it again. (worked one time only)
    My big problem is that i use Acronis backup solution and the software can't find the share where the backups are.
    In last 10 days i have 5 successfull backups and 5 failed due to access problems with the device.
    Can any one help?
    Solved!
    Go to Solution.

    Hello Stimar
    Is the unit connected to a domain controller?  Are you having issues accessing the shares using a domain user or a local user, both?
    If connected to a domain, have you set a preferred server ?  If not, the unit will use the DNS under the Network page to try resolve the AD server.  You will want to make sure you have the correct preferred server or DNS or you may run into permission issues.
    Double check that the user(s) have at least read access permissions from the web interface, if you have the file level encryption option enabled, you may need to adjust permissions from your domain controller as well.
    If you are on a different sub-net than the px6 that can cause share access issues.
    If the above suggestions do not help, LenovoEMC support should be contacted. 
    LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
    US and Canada: https://lenovo-na-en.custhelp.com/
    Latin America and Mexico: https://lenovo-la-es.custhelp.com/
    EU: https://lenovo-eu-en.custhelp.com/
    India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
    http://support.lenovoemc.com/

Maybe you are looking for

  • My ipod won't let me update or download any apps

    I have a iPod touch 4g up to date and so do my brother and sister and we have had them for years without this problem. none of us are able to update or download apps, or anything for that matter. I have completely reset the router just in case I set

  • Convert a String to Decimal Format in European format

    Hi Experts, I am having a string as a context type for a input field, where the user can enter the Price, I need to convert the same into European format "###.###,00", I am using this below code to convert the string to decimal format User will enter

  • SQL query issue, how to improve it?

    Hello all, I want to create a query with with result in the following result. Every first person of an department starts with the letter A and goes up like this: Name department A Person1 3 B Person2 3 C Person3 3 D Person4 3 E Person10 3 A Person6 1

  • Integration Mac Client and a Windows Print Server

    I want to know if it is possible to install a Mac Printer in a Windows Print Server so that later Users could connect to the WIndows Print Server and install their Mac Printer on their Mac Clients.

  • Queries on IsTransCur & IsTransCurAdj

    Hi All, I am using HFM. Can someone provide me with an insight into the following queries: (1) Which Value members are the two HFM functions (IsTransCur and IsTransCurAdj) referring to? (2) When they are used in the Calculate() rules, at which point