Permit to certain telephone numbers to dial-up to a RAS

I want to set up a remote access server with one wic-2am and one wic-1b-s/t cards.
I would like to know if it is possible to configure the router to accept calls only from particular telephone numbers.
Thanks in advance

Hello,
for the ISDN connections, you could use the 'dialer caller' (or 'isdn caller' for legacy dialer profiles); not sure if something similar exists for analog connections...
dialer caller
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/dial_r/dia_d1g.htm#wp1120901
isdn caller
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/dial_r/dia_i2g.htm#wp1052104
HTH,
GP

Similar Messages

I just got an iPhone 6 and a new telephone number and already getting unwanted call. How do I block certain telephone numbers?

I just got an iPhone 6 and new telephone number and am already getting unwanted calls. How do I block telephone numbers in missed calls?

If you're in the U.S., you may also want to register the number with donotcall.gov.
Best of luck.

How do I make telephone numbers clickable, so that it dials on the iPhone in pages?

I write guides and they have telephone numbers, wouldn't it be nice if the reader/user of my epub-book could just click on the telephone number and it starts to dial. Does anyone know of a way. Apple support in Germany didn't have an answer. I would be grateful if someone could help.

Not available in Pages.
Have you iBooks Author or just Contacts?
Peter

ASCII (SYMBOLS & CHARACTERS) Conversion to Telephone numbers

I am using oracle Release 9.2.0.7.0 and I am trying to access a database containing telephone numbers and codes, the table contains two columns with the names no and code both are VARCHAR2 column datatype. As you can see below the values in these two columns are ASCII characters and symbols. I tried to save the SQLPLUS query (select no, code from subdata) into a a file using spool command but the Ascii symbols and characters have being changed into some other format I am not familiar with I will show it below. Therefore is there a function that can help me to convert the ascii codes into the telephone numbers without doing any import or export, an embedded SQLPlus function will help me very much.
This is a sample of the current table containing the ASCII codes:
no code
%)öFƒ   cs☺ ☻YO
%)ûe_   cs☺ ☻Y_
%)ö►_   cs☺ ☻Y
%)ö♥▼   cs☺ ☻YÅ
%)ö"_   cs☺ ☻Yƒ
%)ö☻o   cs☺ ☻`
%)ô☺▼   cs☺ ☻`▼
%)öt_   cs☺ ☻`/
%)öto   cs☺ ☻`?
%)æ_   cs☺ ☻a
%)òS▼   cs☺ ☻h_
no code
%)öv   cs☺ ☻pÅ
%)öp?   cs☺ ☻pƒ
%)Æ♠_   cs☺ ☻q
%)öp/   cs☺ ☻q▼
%)öuo   cs☺ ☻q/
%)Æ _   cs☺ ☻q?
%)ö↨O   cs☺ ☻qƒ
%)öu   cs☺ ☻r
%)ÿ☺O   cs☺ ☻r▼
%)öQ_   cs☺ ☻r/
%)öB?   cs☺ ☻r?
24 rows selected.
SQL>
This is the format I got after I saved the query results of the sub_data table into a text file using SPOOL command:
no Code
%)^G\2223?\377\377 cs 5_
%)^G\225^X_\377\377 cs 5\217
%)^G\2238\217\377\377 cs 3/
%)^G\225^Q\217\377\377 cs 6O
%)^G\223^Q^O\377\377 cs 3?
%)^G\223SO\377\377 cs 3o
%)^G\2231^O\377\377 cs 3^?
%)^G\223\225/\377\377 cs 3\217
%)^G\223^W^_\377\377 cs 3\237
Abdel Moalim
Bosaso, Somalia

The two column names are MSISDN and IMSI
MSISDN IMSI
%)VXO   cs☻ ☺sA/
%)sq   cs☻ ☺åo
%)ÖÇ   cs☺ ♥y_
%)ÖÇ_   cs☺ ♥y?
%)ÖÇo   cs☺ ♥yO
%)ÖÇÅ   cs ► y?
%)Öü▼   cs☺ ☻io
%)Öü?   cs☺ ☻iO
%)ÿâO   cs☺ ☻iÅ
%)Öü   cs☺ ♥yo
%)û↕_   cs☺ ☻i
MSISDN IMSI
%)ûÆƒ   cs☺ ☻i
%)ûT▼   cs☺ ☻p▼
%)ûw?   cs☺ ☻po
%)Æ▼   cs☺ ☻p
%)ÿêO   cs☺ ☻hƒ
%)ûR_   cs☺ ♥y/
%)ùFÅ   cs☺ ♥s
%)ÿ1_   cs ► i?
%)ÿü▼   cs☺ ☻p/
%)ùöƒ   cs☺ ☻p
%)ÿ1o   cs☺ ☻hÅ
MSISDN IMSI
%)òE_   cs☺ ☻É
%)ÿ   cs☺ ♥sÅ
%)û0Å   cs ► dƒ
%)Ö♥Å   cs☺ ♥sƒ
%)Öbo   cs☺ ♥t/
%)ÿ    cs☺ ♥t?
%)Ö♠Å   cs☺ ♥tO
%)û%O   cs☺ ♥t_
%)æ?   cs !_
%)Öö   cs☺ ♥to
%)ûV   cs☺ ♥tÅ
MSISDN IMSI
%)òô/   cs☺ ☻cƒ
%)òSÅ   cs☺ ☻d?
%)òSƒ   cs☺ ☻hO
%)òV▼   cs☺ ☻do
%)ò3   cs☺ ☻"ƒ
%)òT▼   cs☺ ☻h
%)ò3o   cs☺ ☻ho
%)ÖG   cs☺ ♥tƒ
%)Ö1?   cs☺ ♥u
%)Ö`_   cs☺ ♥u▼
%)Ö2?   cs☺ ♥u/
MSISDN IMSI
%)ùù/   cs☺ ♥u?
%)Ö►o   cs☺ ♥w?
%)D☺▼   cs☻ ☺Eÿ?
%)ÿY   cs☺ ♥w_
%)ÖDo   cs☺ ♥wO
2469 rows selected.
SQL>

HT5622 How do I change the Apple id against a certain telephone number? I have two iPhones and wish to use a different Apple id for each and confused as to how I do this?

How do I change the Apple id against a certain telephone number? I have two iPhones and wish to use a different Apple id for each and confused as to how I do this?

Create a new Apple ID for the second phone. If you are setting the phones up as new phone enter the ID you want to use on each phone.
If both phones are already signed in to one Apple ID then use the settings app to change Apple IDs on one phone.
Settings > iTunes and App Store > tap on the Apple ID > sign out > sign in with alternate Apple ID.
Note that if you have downloaded apps with the original Apple ID on the phone with the new Apple ID, those apps will still be associated with the old Apple ID and will require the old ID and password in order to update them.

How to Format telephone numbers in Adress Book

I want to format all my telephone numbers to an International format as from the UK. Such as +44 #### ### ###. But try as I will to input this into Address Book Phone Preferences under custom nothing happens. The drop box gives three pre-set format and the custom option ~ I can alter the pre-set numbers but not save them, I can also enter a custom set up but it does not save or implement itself.
Strangely the presets work, but not when altered (I have pressed enter to save!)
Can anyone make some 'sane' suggestions as I need to get all telephone numbers in the same +44 format without having to go through everything by hand.
Here's hoping, thanks guys.
iMac 15, 17 & 20 plus 12 Powerbook. All linked by Airport Mac OS X (10.4.6)
iMac 15, 17 & 20 plus 12 Powerbook. All linked by Airport Mac OS X (10.4.3)

You posted in the OS 9 (pre-year 2000) forum instead of the MacBook Pro forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
What OS X version are you running?
 Cheers, Tom

XIF Adapter : Upload of Business partner(Using LSMW) Telephone Numbers

Hi all
I'am uploading BP data using XIF Adapter and I am using the LSMW-IDOC Method (Basic type:CRMXIF_PARTNER_SAVE_M02)
Here My client came with 4 telephone numbers, can any one please help me how can I uploade these 4 telephone numbers. when I am trying to upload by default it was accepting only the first telephone number and leaving the others
Thanks in advance
Warm regards
bms

Hi Thierry,
thank you for that suggestion. I've already found [ODS for Marketing Attributes|http://help.sap.com/saphelp_crm50/helpdata/en/07/d545a50869754fbad8062e17c2ea0e/frameset.htm] when I've searched in the CRM Documentation. I've just asked my BI colleague to do the extract to BW. I will then write a Web Service on the BW which can be called from the external system.
Best regards
Gregor

HT4623 My contacts are listed by telephone numbers instead of names in my messages since I upgraded to OS8? How can I change it to names?l,

My contacts are listed by telephone numbers instead of names in my messages since I upgraded to OS8? How can I change it to names?l,

Under Settings->Messages->Send & Receive
1) is your Apple ID listed there?
2) Under "You can be reached..." is your phone number appearing at the top of the list and does it have a checkmark next to it?
3) Under "Start New Conversation From" is the checkmark next to your phone number?

Why do my senders of txt messages show up as telephone numbers instead of names?

Why do my senders of txt messages show up as telephone numbers instead of names?

Chances are the senders are not in your contacts.

Automatic insertion of spaces in telephone numbers in iPhone OS 3.0.1

Hello!
I think there are two annoying behaviors in iPhone OS 3.0.1:
• if you go to contacts, create a new contact and enter a telephone number there will be inserted automatically spaces into the telephone number. One the one hand this behavior can be very practical (for example if iPhone 3.0.1 identify thereby already used formats of telephone numbers), on the other hand this behavior can be very annoying (for example if you want to create a special format for one telephone number). If you synchronize telephone numbers from your iMac to your iPhone, iPhone OS 3.0.1 put also automatically spaces into synchronized numbers.
• there is also missing a hyphen in the number keyboard to insert into the telephone number in iPhone OS 3.0.1.
First I think it would be a very good if there would be a function in iPhone OS 3.1 which deactivates the automatic insertion of spaces, secondly I think there should be a a hyphen in the number keyboard to insert into the telephone number in iPhone OS 3.0.1.
How do you think about my suggestions?
Message was edited by: Roman Patrice Gego

ok after all summer have this toy (BETA )iphone upgrade to 3.0.1 still drop calls so i send it for repair or replace i can write full pages regarding that beta product i need to find tonight to send mail to EU as a customer i need to find my right i pay 600 euro in 10/06/09 and still is not working properly as it must be A PHONE i am professional and i need my phone to work as a tool i wll reply too all that will ask me my phone number exept my e-mail are
[email protected]
0035799845222

Mobile number and telephone numbers not displying in lync contacts for other SIP domains.

Hi everyone,
we recently migrated Lync 2010 to 2013, we have 2 SIP boc.bh and scys.gov.bh and local domain boc.local.
lync users for boc.bh not getting telephone numbers & mobile number on lync contact list, same happening for scys.gov.bh lync users they are not able to see any boc.bh lync user telephone number and mobile number on lync list.
but old with lync 2010 all users able to see all numbers in lync list.
recently we changed user UPN suffix for BOC.bh and scys.gov.bh to respective users.
there is no any error massage on lync servers.
manish yadav

Hi Manish!
On the Lync Server 2013 environment you can run the Lync PowerShell command: "Update-CsUserDatabase" after 5 minutes run the command: Update-CsAddressBook
Please after that run: "Invoke-CsManagementStoreReplication" wait for Lync replication with command: "Get-CsManagementStoreReplicationStatus" when Status for each server is appearing as True finally apply the following steps to test with
2 accounts:
Log off of the Lync client and delete the profile from:
%userprofile%\appdata\Local\Microsoft\Office\15.0\Lync
then execute the following command in the command prompt to add the registry that forces the Lync client to immediately download the address book:
reg add HKLM\Software\Policies\Microsoft\Office\15.0\Lync /v GalDownloadInitialDelay /t REG_DWORD /d 0 /f
Sign-in to users again to lync client and test between each other.
PLEASE REMEMBER, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answered"

How to update multiple telephone numbers of a customer in ADR2 table?

Can anyone please help on how to update multiple telephone numbers of a customer. Is there a function module available for the same?
Does SD_CUSTOMER_MAINTAIN_ALL Func Mod. update only the default telephone number in adr2?

Hi,
check this link
link:[Customer tel number change.;
hope u'll get some idea.
Regards,
Sneha.

How can I include telephone numbers when printing address labels using Dymo Labelwriter Turbo 330?

I am able to pull info from Apple Address Book using the Dymo Labelwriter application, but I cannot seem to include telephone numbers. Does anyone know how to do this?

short answer
1 - NO
2 - It is up to apple to correct the issue and I have heard they will look at it. It doesn't hurt to call customer support both apple and dymo to let them know you are unhappy about this [it used to work fine in later versions of 10.3]. Also don't let them convince you that you must have installed the driver wrong or something. I have had the same problem on 3 different macs [one of which was brand new] with 2 different dymo label printers.

I want to create a formula for telephone numbers in the formula editor

Is there a way to create a formula for telephone numbers in the "custom" editor in the inspector
IE if I enter 2123456789 into a cell it automatically formats it to look like this (212) 345-6789

You can create a new format by opening the Cells Inspector, then selecting "Custom" from the format menu:
You can add the ### fields and click the menu on the left of the field:

How to separate telephone numbers in contacts

how to separate telephone numbers in groups of 4 in contacts

You posted in the OS 9 (pre-year 2000) forum instead of the MacBook Pro forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
What OS X version are you running?
 Cheers, Tom

Permit to certain telephone numbers to dial-up to a RAS

Similar Messages

Maybe you are looking for