Persian(فارسی)Keyboard on new update does not work (10.3.2)

persian keyboard does not work in 10.3.2 os unfortunately,does not some of the original persian letters like پ چ گ ژ

Thank u very very very very much, i just paused the antivirus and the updated installed the new software 4.3.3 on my iphone 3gs. thank u very much again from my heart. i was trying again and again from 2 days and always i was wasting 421mb of my data.....but at last its done thanks
Priyesh

Similar Messages

New update does not work.

hi guys,
i have a iphone 4,and i like to upgrade to 4.3.1. everytime i download the new update from itunes, once the download finishes it says
"There was a problem downloading the software for the iphone "my iphone name". The network connection timed out,
Make sure your network settings are correct and your network connection is active, or try again later"
I tried it 5 times today without any results. I made sure each and every time, the download was 100% complete and it even starts to say "processing file" and than that little pop up error comes up.
I have a iphone 4, with 4.2.1. i tunes is 10.1.2.17
any advice?
thanks
M

Thank u very very very very much, i just paused the antivirus and the updated installed the new software 4.3.3 on my iphone 3gs. thank u very much again from my heart. i was trying again and again from 2 days and always i was wasting 421mb of my data.....but at last its done thanks
Priyesh

New Apple Keyboard Launchpad F4 key does not work

New Apple Keyboard Launchpad F4 key does not work
Hi, I have now got ne new wireless keyboard because my old one broke. I connected the keyboard, the F3 key (Mission Control) functions, the F4 key, especially for Lunchpad does not work, I'm Lion on it, previously on the old keyboard I had in 2009, he occupiedwith Launchpad F5.
Have System Preferences / Keyboard / Keyboard Shortcuts reset everything goes ......... but not yet!!
Maybe someone can help me!!
Thank you
greeting

Hi,
Your migration to Lion brought over a previous hot key preferences document. And this contains one bad key that wasn't updated.
- Quit System Preferences (if open)
- Delete this document to remove a carry-over mapping error.
- Then logout
Note: That this will delete any existing modified keyboard assignments. Re-assign changes manually.
Note2: This document is in your users preferences folder.
~/Library/Preferences/com.apple.symbolichotkeys.plist
-Alan

Windows update does not work after using System recovery disk

I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
Solved!
Go to Solution.

I get errors saying A problem is preventing the troubleshooter from starting.
That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
   Trouble with reinstall of Win7 64 on a L505-ES5018
The fix was to install a new hard disk driver.
   Intel Rapid Storage Technology
-Jerry

HT1338 my software update does not work using OS X 10.6.8: update icon just stays static and times out, although web is online

My software update does not work: the icon jams and then times out, although web is online. How to resolve??

Snow Leopard DVD:
You can get it only by phone now from Apple.
In the US, call 1-800-MY-APPLE and ask for a sales assistant. Last quoted price was $19.99 for the single-user and $29.99 for the family licence.
For other countries, check here; http://support.apple.com/kb/HE57
Don't forget to ask for Sales; the tech support guys can't help.
When you've installed SL it will be 10.6.3. You need to update that to 10.6.8 with the combo installer from http://support.apple.com/kb/DL1399 - that gives you access to the Mac App store.
Lion is only available by phone also - same number and they'll give you a download code to use in the Mac App Store.
If you're going to Mountain Lion you don't need to install Lion first - you can do it straight from Snow Leopard 10.6.8.
Specifications;
Snow Leopard 10.6.x:
Lion 10.7.x;
Mountain Lion 10.8.x:
As for Lion, but also must be one of these groups;
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminium, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
<sorry to repeat, guys, but following links isn't always a given with OPs>

I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MEASAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER!

I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MESSAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER! ALSO IF I KILL MYSELF I WILL HOLD YOU PERSONALTY RESPONSIBLE.edit

There is a world of information in these forums if you use the search function near the top right of this page. Just type in NAS for example and you get many threads on the subject (marked with a green checkmark if it solved the question) another example would be Airport Exterme and sound system. Once you formulate your ideas better then specific questions can be addressed one at a time. You may find that a less expensive choice for a server might be a mac mini. Good luck with your project, ask more specific questions and update you systems profile.

When I try to open a new tab using the "+" on the toolbar, nothing happens. Even trying to use the cntl t to open a new tab does not work. To open a new tab, I must right click on a hyperlink. how can I correct this? Using Firefox 3.6.18

When I try to open a new tab using the "+" on the toolbar, nothing happens. Even trying to use the cntl t to open a new tab does not work. To open a new tab, I must right click on a hyperlink. how can I correct this? Using Firefox 3.6.18

The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

Why does right clinking on link and selecting open in new tab does not work?

Why does right clinking on link and selecting open in new tab does not work?
It opens up a blank page. The only way to make the link work is to click on the navigation bar in the new tab and press enter to reload the link.

Do you have that problem when running in the Firefox SafeMode? ''A troubleshooting mode.'' 
1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. 
2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpaid the first before pairing the second. How do I unpair?

I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpair the first before pairing the second. If this is true, how do I unpair? If not, what can I do?

I was premature in posting the question. I found the answer in andother posting, and it was successful.
Thanks, and sorry for the false alarm.

What if sync with new computer does not work. logical connection to old with WindowsXP, 32 bit version of iTunes. New is Windows7 with 64bit version

What if sync with new computer does not work?
logical connection to old with WindowsXP, 32 bit version of iTunes.
New is Windows7 with 64bit version

Syncing to a new iTunes library or computer will erase your iPod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Do this:
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your iPod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in iTunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved: http://support.apple.com/kb/HT4946
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device
If your iPod can't be recognized by Windows, try these tips: iOS: Device not recognized in iTunes for Windows

I upgraded Safari in my Mac (10.6.8 Leopard) but the new version does not work with my system so that I now have not a working browser. How can I solve the problem and/or install back my previous Safari version?

I have upgraded Safari in my Mac, but the new Safari does not work with my system. So I find myself without any working browser. How can I solve this problem and/or install my previous Safari version?

Reinstall Safari 5.1.10 for OS X 10.6.8: http://support.apple.com/kb/dl1569. Might do the trick.
But, frankly, I don't think that simply reinstalling the old Safari will work because of all the peripheral, under the hood changes that happen when you upgrade from one version of Safari to another. Reinstalling 5.1.10 may be insufficient to turn back the clock. (This is the moment where a Time Machine or another form of full backup would save your bacon.)
While you're getting a copy of Safari 5.1.10, get a copy of Firefox (https://www.mozilla.org/en-US/firefox/desktop/), too, so that you have an alternate browser to use as you're sorting matters.

Automatic update does not work

On my both computers (Windows 7, Window 8), the automatic update does not work at all, although it is activated in the options. All I get in the Firefox info box is that an update is available, with a link that I have to follow to download the installation file and install it manually. No difference even if I wait for weeks, the update is neither downloaded nor installed automatically. The problem persists in all Firefox versions since version 3.6.16 / 2011 (the last update in the chronicle). Note that the automatic update seems to perform well in the Windows XP mode of my Windows 7 system !

It will update eventually; there may have been availability problems on the update servers.

New tab does not work

"Open a new tab" does not work, nor does File/New Tab

This issue can be caused by the Ask.com toolbar (Tools > Add-ons > Extensions)
Your system details show that toolbar in the user agent as AskTbWCL2/3.12.2.16749
See:
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Ms updates does not work after recovery win 7 pro on dv4-2167sb

info on problems with MS updates right after a new install of win 7 pro: does not install updates and will not install SP1 from down load . I used recovery disks I made. The OS [win 7 pro] recovered great but MS updates did not work from the get-go.. {Personal Information Removed} HP NEEDS TO GET ME OS RECOVERY THAT WORKER I HAVE 4 OF THIS DV4-2167SB 'S
Been on the phone with hp [not US] for more than hr. talked to two svr. hungup on 3 times, HP needs some New VP's.

Hi VP_IA_DOT,
I saw your post and forwarded it to the right people for their review. You should hear back from someone shortly via private message on this Forum.
Thanks,
NicNac - HP Support Forums Moderator
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

Right click on a link and selecting "open in new window" does not work. How do I gewt this feature to work? PS Right click on a link and selecting open in new tab does.

No matter where the link is - in an e-mail or on a web page - the "Open in new window" feature does not work. Very annoying. Also I close Firefox in a session, but then cannot re-open it. When I shut my PC down I get a prompt to End Task -[ Firefox ] and a window opens asking if I want to save tabs and quit; quit; or cancel. After closing Firefox it does not show as an application running in Task Manager
== This happened ==
Every time Firefox opened
== I recently re-installed Firefox.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

Persian(فارسی)Keyboard on new update does not work (10.3.2)

Similar Messages

Maybe you are looking for