Persistant volume consistancy check problem

Recently installed new 750 gig hdd and partitioned it into 3 volumes- Snow Leopard/Aperture Library/Lion. Each system has the latest updates but problem predates updates and continues to occur.
Using Drivepulse the Lion volume (which was a clean re-install with data/apps migrated from healthy snow leopard volume) shows persistant volume consistancey problems. Both disk utility and drive genius usually fail to repair the problem. Disk warrior sorts it but only for the problem to return , as in a matter of hours/days. This problem only occurs on the Lion volume.
Can't believe its hardware related as its restricted to one volume, but confused why it would appear after clean install.
Would like to hear of any suggestions and precautions I should take
Regards
Pat

I think, although I am not sure, that this indicates some corruption of the filesystem. I suggest that boot off the install CD and run Disk Utility to repair the disk that you are updating. There are instructions in Resolving Disk, Permission, and Cache Corruption. See the section on repair disk.
Also, I assume that the Panther CD is a retail CD. If it was made for a specific machine, it probably will not work on your computer.

Similar Messages

  • Volume consistency check

    I just bought Osx Panther 10.3.3 to upgrade my old Osx 10.1.5 on my emac G4. Problem is I can't install it because installation stop when checking volume consistency. Always at 42%. I'm far from a computer expert and really don't know how to resolve the problem.
    Do someone know how?
    Thanks.
    emac G4   Mac OS X (10.1.x)  

    I think, although I am not sure, that this indicates some corruption of the filesystem. I suggest that boot off the install CD and run Disk Utility to repair the disk that you are updating. There are instructions in Resolving Disk, Permission, and Cache Corruption. See the section on repair disk.
    Also, I assume that the Panther CD is a retail CD. If it was made for a specific machine, it probably will not work on your computer.

  • Secondary DPM (2012 R2) Issues: synchronising too much data from Primary DPM, persistant consistancy checks, and no dedup support!

    I have a Primary DPM server that is protecting various File servers and a Exchange DAG. Everything is working as it should on this server, but I am experiencing constant issues on the secondary DPM protecting these same data sources.
    On the primary, two Protection Groups in particular are set up to protect two different volumes on the same file server. Volume D:\ is 46TB in size, with a deduplicated file size of 22TB (actual 39TB) whilst Volume E:\ is 25 TB in size, with a deduplicated
    file size of 2.5TB (actual 5.5TB).
    Issue 1:
    As expected Volume D: was initially replicated to the secondary DPM server at its undeduplicated size ( 39TB), as was Volume E:\ with initial replication to the secondary of 5.5 TB.  So when is Microsoft going to support dedup on a secondary DPM ? It
    seems daft to support dedup on the Primary DPM which is always more likely to be close to the original datasources on the  LAN and not on the secondary DPM which is most likely to be placed offsite on a WAN !
    Issue 2:
    I have a big issue with the subsequent Synchronizations on the secondary server for E: which seems to transfer almost the full 5.5 TB every day ( I have it set to sync every 24hrs) - although the data is fairly static (i.e.unchanging) on that volume. On
    one occasion a Sync continued for over 48 hours for this volume and had transferred over 20GB (according to the DPM console) , until I manually cancelled the job - how is that possible on a volume with only 5.5 TB (UN-deduplicated) ?? What is going on here
    - has anyone any ideas?
    Issue 3:
    Another File server I am protecting on both the Primary & Secondary DPM server - always fails over to a consistency check on the secondary server - usually due to the fact it cannot access a particular file which results in an inconsistent replica .
    However the Sync (and subsequent restore point) on the primary DPM server from the original datasource is always completes without any issues. Again, has anyone any clues ?
    I do get the impression that the whole Secondary DPM thing is not quite robust enough. I can only assume that as the Primary seems to protect the original datasources ok, that the issue is with the secondary reading the information on the primary DPM.

    I tried changing the time of the synchronization, but that didn't help.
    Meanwhile, I was working on another unrelated case with Microsoft and so I didn't want to have a second case open at the same time. So I waited for some weeks with no change on this problem. Then, about a day or two before I was finally going to call Microsoft
    to open a case (months after the problem had started), the problem suddenly resolved itself, with no input from me! So I don't really know if it was time that fixed it eventually or what. Sorry I can't be of more help.
    Rob

  • LMS3.1 psu problem - Consistency check failed for base package ...AG

    Hello,
    We've got a package updater problem with a LMS3.1 installation.
    1. After trying to update RME Device packages from GUI we got a message that LibCommon-v2.3.2 is needed
    2. We tried to update LibCommon from CLI using psucli.bat, see below
    3. We found a discussion in this forum, simular to this problem with the hint to reinstall the RME, what we did but with no improvement
    4. We deinstalled, reboot, did a new installation of LMS3.1. But the problem still exists, with same message. We need the PSU, because most of our devices will be managed after device package update only.
    Updating of each package brings warnings with pseudo package names, as ImageAG, MemoryAG and not with hints to real missing packages:
    C:\lms\bin>psucli -p rme -install -src C:\install\lm31-updates\ LibCommon
    WARNING: LibCommon(2.3.2):Consistency check failed for base package ImageAG
    see also the psu.log containing all tryes of package updates
    The problem goes a little bit in this direction, but with a new reinstallation as well:
    https://supportforums.cisco.com/message/669047#669047
    What can we do?
    thx for hints, Steffen

    When you install LMS on Windows, there are some recommended steps to take to ensure the installation is a problem free as possible:
    Set the per-user and global TEMP and TMP environment variables to short values (e.g. C:\WINDOWS\TEMP)
    Disable all anti-virus software
    Disable Windows Data Execution Protection (DEP)
    Login to the server as a local Adminitrator
    Install from original, locally attached media
    NEVER abort the installation after the installer says not to
    Based on the symptoms described here, I'm guessing at least the first item was not done.  TAC has a procedure to recover a bad RME package repository, but if the base installation is problematic, doing so would be moot.  If you suspect the installation isn't 100% (beyond the package repository), uninstall, then follow the above steps to reinstall.
    If you think the problem is just with the RME package repository, contact TAC, and they can provide you a good, up-to-date repository to jump start things for you.

  • LMS3.1 psu problem - Consistency check failed for base package

    Hi all,
    I tried to install the following packges for CiscoView 6.1.9:
    Rtr2900.cv50.v2-0.zip
    Rtr3900.cv50.v2-0.zip
    but it gives me the following error:
    Consistency check failed for base package NGMARShare
    There are no Packages to be installed.
    I uninstalled all packages and installed them again after I copied these two packages in the packages sources folder but it failed again.
    Any one can help?
    Thanks

    the new package you try to install depends on a package that you don't have
    DEPENDENT PACKAGE
    =================
    DtShare V1.5 (DtShare.cv50.v1-5.zip)
    this can be seen from the error message you got
    "Consistency check failed for base package DtShare"
    my advice is to read the "Release Information" for the packages you try to install
    you can find the Release Information in the same page of the download.
    hope this helps,
    also it's better to update all the device packages if your server have internet connectivity from CS > Software Center > device update.

  • DPM 2010 - Consistency checks stops after 23 hours

    When running a consistency check on a very large amount of files, the checks repeatedly stops after 23-24 hours.
    How do I solve this, so that I get a full consistency check and a good replica?
    Please visit http://www.bleumer.eu

    Hi,
    OK - I'm not aware of any known DPMRA crash issues for DPM 2010 UR7 - so this will need to be investigated by getting the crash stack and possibly a process dump.  Please open a support ticket for investigation.
    In the meantime - run a chkdsk /f against the DPM replica volume to be sure we're not crashing due to a file system problem.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • The time characteristic consistency check has produced an error     DBMAN     62

    Hi
    We are getting an error while updating to one target as The time characteristic consistency check has produced an error""
    * Checked the respective PSA data field  which is fine. Dates are in correct format.
    * RSRV ran for the particular target. It had error but the jobs were successful till yesterday.
    * Data from 01.05.2014 is having the problem ( Which I got from the record number in PSA )
    NB: We are running on HANA database but the respective target is not yet HANA Optimised
    Details Figures Attached
    Any Idea.. What could  have gone wrong
    Regards
    Reshoi R

    Hi
    Record Number 2995 is shown in the figures attached.
    I have already carried out the deletion and automatic repair mentioned in RSCV061 even before posting this question but of no use ( I have shown that also in the figures attached at the posting time.
    Reporting is fine. The problem is while loading the data to the cube. The loading is fine till date 30.04.2014 but from the date 01.05.2014. The record is error while updating.
    The cube is partitioned from month 01.2008 to 12.2015.
    Regards
    Reshoi R

  • Reg: consistency check in recordset structure validation

    Hi all,
    I am doing FCC to FCC scenario, i am getting this error. Help me out, it is very urgent for me.
    Sender Adapter v2723 for Party '', Service 'bs_text2text':
    Configured at 2007-08-21 08:00:49 UTC
    History:
    - 2007-08-21 09:29:06 UTC: Retry interval started. Length: 2.000 s
    - 2007-08-21 09:29:06 UTC: Error: Conversion of complete file content to XML format failed around position 0: Exception: ERROR consistency check in recordset structure validation (line no. 87: missing structure(s) in last recordset
    - 2007-08-21 09:29:06 UTC: Processing started
    - 2007-08-21 09:29:04 UTC: Error: Conversion of complete file content to XML format failed around position 0: Exception: ERROR consistency check in recordset structure validation (line no. 87: missing structure(s) in last recordset
    - 2007-08-21 09:29:04 UTC: Processing started
    Regards,
    Ajay.

    Hi Ajay,
    Problem with the file content conversion parameters you specified in the sender file adapter. 
    Do let us know your DT structure and FCC parameters specified in adapter.
    Regards,
    Sumit

  • OBIEE Consistency Check is taking too much time

    Hi,
    When I run consistency check globally, it takes too much time. Itt  is waiting after completing about %80 of it. I can't click on it, the application is freezing. How can I recover it? What can be the cause of this problem?
    Thank you for your attention,
    Regards

    Hello Mohan,
    The DBTABLOG table does get large, the best is to switch off logging. If that's not possible, increase the frequency of your delete job, also explore one more alternative have a look at the archival object: BC_DBLOGS, you could archive old records (in accordance with your customer's data retention policies) to reduce the size of the table.
    Also, have a look at the following notes, they will advise you on how to improve the performance of your delete job:
    Note 531923 - Audit Trail: Indexes on table DBTABLOG
    Note 579980 - Table logs: Performance during access to DBTABLOG
    Regards,
    Siddhesh

  • Recovery points and consistency checks are failing for one disk on file server. Access is denied (0x80070005)

     Good day! I've built a new DPM 2012 R2 server and migrated or re-created jobs from my older 2012 SP1 DPM servers as trying to upgrade them was not working out. The DPM R2 server is running great besides this one issue. The problem is with a file
    and print server at a remote office. Since it has around 750 GB of user data on it I chose to do manual replica creation on the data disk, (E:) but created the C:\ drive replica normally, over the WAN. The manual replica creation was successful, and the initial
    consistency check and recovery point creation worked as expected, however, since then it will not create another RP or run a CC on the E:\ drive. Recovery points on the C:\ drive are being created properly. When I try to run a CC I get this error: "An
    unexpected error occurred while the job was running. (ID 104 Details: Access is denied (0x80070005))" I've tried to drop protection on the two directories of the E:\ drive (retaining data) and re-create, but that didn't help. I've even done a recovery
    from the initial RP to verify that it was created properly, and that worked as well.

    Hi,
    Access Denied error is usually caused by Antivirus software.  Please disable real time scanning on the DPM Server for DPMRA process. 
    928840 You receive job status failure messages in Data Protection Manager
    http://support.microsoft.com/default.aspx?scid=kb;EN-US;928840
    For DPM 2012 the path has changed.
    To resolve this problem, configure the antivirus program to exclude real-time monitoring of the Dpmra.exe program on the Data Protection Manager server. By default, the Dpmra.exe file is located in the following folder:
    %ProgramFiles%\Microsoft System Center 2012\DPM\DPM\Bin
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • RME 4.3.1 device update failing 'WARNING : Cat3560(7.3):Consistency check failed for base package SharedNetshowIOS'

    Hi Guys,
    I'm having some issues updating the device packages for my RME 4.3.1 install.
    I've downloaded and tried to update the 'Cat3560.zip' package via the GUI, but the job fails with the above error.
    I pulled up the PSU.log and found the following:
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : _CURCMVER=5.2.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : CMF Package Map Available.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : CMVERSION=5.2.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : VERSION=4.3
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : PATCHVER=1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : _CURRMEVER=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : Mdf=1.41:MDF Package
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : RMEVERSION=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : _CURCMVER=5.2.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : CMF Package Map Available.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : CMVERSION=5.2.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters]  : Adapter for CM already loaded.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters]  : Adapter for CVW already loaded.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>]  : _CURDFMVER=3.2.0
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>]  : CMF Package Map Available.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>]  : DFMVERSION=3.2.0
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : VERSION=4.3
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : PATCHVER=1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : _CURRMEVER=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : Mdf=1.41:MDF Package
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : RMEVERSION=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters]  : Adapter for RME already loaded.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters]  : Adapter for CVW already loaded.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : VERSION=4.3
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : PATCHVER=1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : _CURRMEVER=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : Mdf=1.41:MDF Package
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : RMEVERSION=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters]  : Adapter for RME already loaded.
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageManager : installPackages]  : Locking package repository..
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageInstaller : installStep_resolve]  : Checking Dependencies...
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : pickUnselectedBasePackages]  : SharedSwim2900XL has 17 dependent packages
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[ImageParserAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Lower version of dependent package[SharedDcmaIOS] installed
    [ Thu May 27 10:11:50 PDT 2010 ] ERROR  [PsuPkgResolver : pickUnselectedBasePackages]  : Consistency check failed for base package SharedDcmaIOS
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[DistributionAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Lower version of dependent package[LibSwim] installed
    [ Thu May 27 10:11:50 PDT 2010 ] ERROR  [PsuPkgResolver : pickUnselectedBasePackages]  : Consistency check failed for base package LibSwim
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[SwimJobOptionsAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[ImageAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[SoftwareAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[ConfigAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Lower version of dependent package[LibCommon] installed
    [ Thu May 27 10:11:50 PDT 2010 ] ERROR  [PsuPkgResolver : pickUnselectedBasePackages]  : Consistency check failed for base package LibCommon
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[SystemAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[ImageListAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[ContainmentAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[FlashAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[MemoryAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[RemoteStageAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[SwimCCOAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Lower version of dependent package[SharedSwimIOS] installed
    [ Thu May 27 10:11:50 PDT 2010 ] ERROR  [PsuPkgResolver : pickUnselectedBasePackages]  : Consistency check failed for base package SharedSwimIOS
    [ Thu May 27 10:11:50 PDT 2010 ] WARN   [PsuPkgResolver : pickLatest]  : No packages to pick ..Empty package set passed .
    [ Thu May 27 10:11:50 PDT 2010 ] ERROR  [PsuPkgResolver : populateResolverResult]  : All selected packages failed consistency check..
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [SimpleProgress : progressInfo]  : Progress: WARNING: SharedSwim2900XL(2.2.3): Consistency check failed for base package SharedDcmaIOS
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageInstaller : installStep_resolve]  : Packages selected for install (satisfies consistency check) : []
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [SimpleProgress : progressInfo]  : Progress: No packages to be installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageManager : installPackages]  : Creating maps in D:\CSCOpx\www\classpath\com\cisco\nm\xms\psu\pkgs\rme
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.11.2.3.7.5.19 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6010 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6020 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6030 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7101 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.8110 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6040 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7102 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7201 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6050 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7103 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7301 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6060 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7203 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7401 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7501 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7303 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7213 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6070 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7502 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7223 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7503 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7504 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : * not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:31 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.9.1.99999999 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6010 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6020 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6030 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7101 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.8110 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6040 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7102 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7201 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6050 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7103 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7301 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6060 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7203 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7401 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7501 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7303 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7213 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6070 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7502 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7223 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7503 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7504 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:44 PDT 2010 ] INFO   [PackageManager : installPackages]  : Releasing lock...
    [ Thu May 27 10:13:44 PDT 2010 ] INFO   [DeviceSupportHistory : init]  : Loading history db fromD:\CSCOpx\lib\classpath\com\cisco\nm\xms\psu\conf\historyDB
    [ Thu May 27 10:13:44 PDT 2010 ] INFO   [DeviceSupportHistory : init]  : Number of Events Loaded in init()6
    Before i started to bug TAC, I figured I'd post this here.
    Let me know your thoughts

    Looks like your package repository has been corrupted.  TAC can provide a procedure  to recover from this corruption.  The following DOC indicates  why this can happen and has suggestions on how to avoid these problems  from re-occuring.

  • How to resolve "Performance counter registry hive consistency check" failed?

    I want to install SQL Server 2008 November CTP Developer Enu. When "System Configuration Check" it shows:
    Rule "Performance counter registry hive consistency check" failed.
    The performance counter registry hive is corrupted.
    And cannot continue installing. How to solve this problem?

    I've actually solved the problem for my Vista and Win 7 (traditional chinese version).
    After revising %systemroot%\system32\WmiApRpl.ini:
    "[info]
    drivername=WmiApRpl
    symbolfile=WmiApRpl.h 
    [languages]
    004=Chinese (Traditional)
    009=English
    [objects]
    WMI_Objects_004_NAME=WMI Objects
    WMI_Objects_009_NAME=WMI Objects
    MSiSCSI_ConnectionStatistics_00000_004_NAME=iSCSI Connections
    MSiSCSI_ConnectionStatistics_00000_009_NAME=MSiSCSI_ConnectionStatistics
    MSiSCSI_InitiatorInstanceStatistics_00001_004_NAME=iSCSI Initiator Instance
    MSiSCSI_InitiatorInstanceStatistics_00001_009_NAME=MSiSCSI_InitiatorInstanceStatistics
    MSiSCSI_InitiatorLoginStatistics_00002_004_NAME=iSCSI Initiator Login statistics
    MSiSCSI_InitiatorLoginStatistics_00002_009_NAME=MSiSCSI_InitiatorLoginStatistics
    MSiSCSI_MMIPSECStats_00003_004_NAME=iSCSI HBA Main Mode IPSEC Statistics
    MSiSCSI_MMIPSECStats_00003_009_NAME=MSiSCSI_MMIPSECStats
    MSiSCSI_NICPerformance_00004_004_NAME=MSiSCSI_NICPerformance
    MSiSCSI_NICPerformance_00004_009_NAME=MSiSCSI_NICPerformance
    MSiSCSI_QMIPSECStats_00005_004_NAME=iSCSI HBA Quick Mode IPSEC Statistics
    MSiSCSI_QMIPSECStats_00005_009_NAME=MSiSCSI_QMIPSECStats
    MSiSCSI_RequestTimeStatistics_00006_004_NAME=iSCSI Request Processing Time
    MSiSCSI_RequestTimeStatistics_00006_009_NAME=MSiSCSI_RequestTimeStatistics
    MSiSCSI_SessionStatistics_00007_004_NAME=iSCSI Sessions
    MSiSCSI_SessionStatistics_00007_009_NAME=MSiSCSI_SessionStatistics
    ProcessorPerformance_00008_004_NAME=處理器效能
    ProcessorPerformance_00008_009_NAME=ProcessorPerformance
    Video_Scheduler_Statistics_00009_004_NAME=Video Scheduler
    Video_Scheduler_Statistics_00009_009_NAME=Video_Scheduler_Statistics"
    I have realized that the code 009 is for english language and 004 for chinese traditional and in my "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
    NT\CurrentVersion\Perflib" did only exist 009 and 0404 key.
    Hence, i've created a new 004 key and copied 009 counter and help contents to this newly created key.
    Without restarting the OS, I was able to install smoothly MS SQL server express RC2.
    I'm so happy to have overcome this problem.
    But just out of curiosity does anyone know the syntax for the language codes? (009 for English, 004 for Chinese and 0404?

  • TDMS consistency check error

    We are having problem at "consistency check for the rules".The
    rules have been check and all are in green.i remember that SAP has
    asked us to check tables CNVMBTRULEINCL and CNVMBTRULEFIPARS right? im
    able to browse table CNVMBTRULEINCL but not CNVMBTRULEFIPARS. the error
    message shows this table is not active, and i cant even open the table
    in SE11/SE16/sm30.
    the error message is as below:
    x_ekpo|the rule import paramter im_bstyp will not be available for this object.
    the same set of rule was used for first client(miq400), but this time its not working for second client(miq485) ..
    the source and destination are the same for the first and second client.
    thanks

    the issue has been fixed in 0799873 2010

  • Consistency check error 38011: Logical tables from multiple subject areas..

    I received multiple 38011 errors when performing a consistency check after merging repositories:
    For example:
    Logical tables from multiple subject areas associated, OHRP and Enterprise Warehouse
    (OHRP and Enterprise Warehouse refer to different business models)
    I'm really not sure what this means, and Metalink and Google aren't turning up anything.
    Thoughts?
    -John

    John,
    Does it say anything about Assertion Failure? Also, this is straight up from help regarding import (through file menu) "Use this option when the objects you import are unrelated to objects already in the repository such as when the business model and physical layer objects do not exist. If an object of the same name and type exists, the import process overwrites the existing object with the new object. When you import objects from one repository into another, the repository from which you are importing must be consistent."
    Sometimes Merge does bring unexpected (and unwanted results) - especially if there're presentation aliases, duplicate business models, or naming conflicts. If it's not too late, I suggest you use Import,rather than Merge, also, preferably starting with a new RPD file. This would enable you to bring items piece-by-piece and hopefully would allow you to isolate the problem.
    Also, depending on the size - it's sometimes preferable to just reproduce missing part(s). I hope this is helpful.
    Also, I forgot to say - the Import is deprecated and not supported. They suggest you use Project Extract and Merge. If Merge isn't working out for you and Import isn't an option - maybe you could try Project.
    Edited by: wildmight on Mar 9, 2009 7:58 AM

  • Sender FTP: FCC Missing Consistency check: no. of arguments does not match

    Hi well my Input i as follows:
    7283167S500481000000001789098
    whereas my FCC in Sender-CC FTP is like:
    RecordSet-Name: BestfileRecordSet
    PecordSetStructure: BestFileHeader,,BestFilePos,
    Recordsets per Mesage: *
    KeyfieldName: BDART
    BestFileHeader.fieldNames=BDKDNR,BDDSKNR,BDART
    BestFileHeader.fieldFixedLenghts=4,3,1
    BestFileHeader.endSeparator= 'nl'
    BestFileHeader.processFieldNames= fromConfiguration
    BestFileHeader.keyFieldValue=T
    BestFilePos.fieldNames= BDART,BDIDENT,BDMENGE,BDFREMD
    BestFilePos.fieldFixedLenghts= 1,8,7,10
    BestFilePos.endSeparator= 'nl'
    BestFilePos.processFieldNames= fromConfiguration
    BestFilePos.keyFieldValue = S
    BestfileRecordSet.endSeparator='nl'
    In CC-Monitoring i get:
    java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'BestFileHeader.fieldFixedLengths' or 'BestFileHeader.fieldSeparator' is missing Consistency check: no. of arguments in 'BestFileHeader.fieldFixedLength' does not match 'BestFileHeader.fieldNames' (0 <> 3)
    so what is wrong?! Can sb help me?!
    br Jens

    Hi Guru, i would appreciate your help. Well the data in input-structure looks like:
    7283167TCARTON        
    7283167T                        
    7283167S014800000000010
    7283167S015823030000004
    7283167S016352100000040
    7283167S016792020000007
    7283167S016793020000007
    7283167S031502020000010
    etc.
    Problem is also that instead of T (header) and S (Position) there might be L,D (also for Position). Therefore i have no clue how to handle these values as keyfieldValues.
    some ideas?! br Jens

Maybe you are looking for

  • Can I return my iPod Touch?

    I just bought an iPod Touch, but realized the 16GB model doesn't have a camera to take photos. Can I return it and buy a different iPod Touch?

  • Only getting an empty file.

    I know that my propertiesSystem object has stuff in it because I can see it on the Eclipse Console, but I cannot figure out why it won't write the information to the SystemProperties.txt file. Properties propertiesSystem = new Properties(); propertie

  • Modify DATE format only for a column

    DB table has two or more columns of DATE type of which a column representing "Date of Birth" should not be of the format of TIMESTAMP . When queried it should return "mm/dd/yyyy" format without 'hh:mm:ss' . The others should be as usual. This is to e

  • Successfactors (SBS)- Query

    Hi Experts, We are figuring out SuccessFactors integration mechanism called Side by Side (SBS) for our client, however we have certain queries for which we are struggling to get the answer. What are the pre-requisites for using SBS? We understand tha

  • Fail2ban won't start

    Hello I've installed fail2ban, but it will not start: [user@blacktower mail]$ sudo systemctl -l status fail2ban.service ● fail2ban.service - Fail2ban Service Loaded: loaded (/usr/lib/systemd/system/fail2ban.service; enabled) Drop-In: /etc/systemd/sys