Persistent Air 3.3 version watermark / textfield on stage

Since Adobe Air 3.3.0.3560 ( May 4) it says "Adobe Air 3 3.3.0.3560 ) (Beta Build)" on the stage. I cannot show this app to a client like this.
Can I get rid of this message?

Surely you can just explain to the client that you're using a pre-release, cutting edge tool and that the final version of that tool isn't too far away? You can make it sound like you're 'in' with the latest technology.

Similar Messages

My MacBook Air has OSX Version 10.9 and suddenly I can no longer access iPhoto including all my photos on my computer. I have tried to update iphote but the message says I signed on with a different password and I can't update.

My MacBook Air has OSX Version 10.9 and suddenly I can no longer access iPhoto. THe message says, 'You can't use this version of the applicaitonn iPhot with this version of OS X. You have iphoto 9.3.2." When I try to update iPhoto, I get a message saying I signed in with a different apple ID and password. This all happened about the same time I got a new iphone. The iPhoto icon has a circle with a line through it.

southiechics wrote:
HEY APPLE! We need help with this. I'm having the same problem. What gives?
Start a new discussion and post it in the iPhoto forum.
Ciao.

Update my macbook air a1369 to version 10.7.4

how can update macbook air a1369 to version 10.7.4

Upgrading to Snow Leopard, Lion, or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s MobileMe service; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer)
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
         3. MacBook Pro (Mid/Late 2007 or newer)
         4. MacBook Air (Late 2008 or newer)
         5. Mac mini (Early 2009 or newer)
         6. Mac Pro (Early 2008 or newer)
         7. Xserve (Early 2009)
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     Am I eligible for the free upgrade?
         See Apple - Free OS X Mountain Lion upgrade Program.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Adobe Air 1.5 version

I need the older air 1.5 version for my old iMac G4 PPC running 10.4.x and can't seem to find it anywhere on the adobe site. Anyone know to get it?

Could you please open a new bug report on this over at bugbase.adobe.com? Please include the air app or download URL to help us reproduce the problem.

Upgrade AIR-LAP1141N IOS Version

How can i upgrade the AIR-LAP IOS Version from 12.4(21a)JA to 15.2(2)JB to try joinning to my vWLC Release 7.4.100
This AIR-LAP has never been joinned to any controller, and i have access to CLI Console.
I try typing archive and upgrade commands but are marked as '%Unrecognized Commands'
after a question mark "?" i see "upgrade" command but is still marked as '%Unrecognized Commands'
i have the TFTP server with my ios image.
Can somene help me about?, What i have to do to upgrade this AP.?
Thanks in advance for your help.

issue the following:
debug lwapp console cli
Make sure you type it all in as the '?' Will not show the command
Now you will be able to do the archive command. The other way is to do the following:
Using a TFTP Server to Return to a Previous Release
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
https://supportforums.cisco.com/docs/DOC-18268
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
http://www.youtube.com/watch?v=QQ_NuxdRhQ4
https://supportforums.cisco.com/docs/DOC-14960
Sent from Cisco Technical Support iPhone App

[svn:fx-4.0.0] 13714: updating the AIR kits with versions that have the fx4 swc recompiled using SDK 13653

Revision: 13714
Revision: 13714
Author:   [email protected]
Date:     2010-01-22 08:12:15 -0800 (Fri, 22 Jan 2010)
Log Message:
updating the AIR kits with versions that have the fx4 swc recompiled using SDK 13653
Modified Paths:
    flex/sdk/branches/4.0.0/in/air/mac/AIR Integration Kit.tbz2
    flex/sdk/branches/4.0.0/in/air/win/AIR Integration Kit.zip

Thanks dude, you saved my ***!
This is my platformOptions.xml file now:
<platform xmlns="http://ns.adobe.com/air/extension/3.5">
    <sdkVersion>6.0</sdkVersion>
    <linkerOptions>
        
        <option>-licucore</option>
        <option>-framework GameKit</option>
        <option>-framework CoreData</option>
        <option>-framework StoreKit</option>
        <option>-framework iAd</option>
        <option>-framework MessageUI</option>
     </linkerOptions>
</platform>
And it works!
I looked into including the 2 .a files
    <packagedDependencies>
        <packagedDependency>libWebp.a</packagedDependency>
        <packagedDependency>libFlurryAnalytics.a</packagedDependency>
    </packagedDependencies>
I put the 2 files into my ane build folder and into my adt command line, but when I try to build the app I get an duplicate symbol error... so i took them out.
\o/

HT4889 When I transferred my data from a 128GB Macbook Air to 256GB Macbook Air (brand new version as of 9/1/13) I end up with 188GB used! I add up the size of Users, System, Library and Applications and it comes to 90GB. What am I missing?

When I transferred my data from a 128GB Macbook Air to 256GB Macbook Air (brand new version as of 9/1/13) I end up with 188GB used! I add up the size of Users, System, Library and Applications and it comes to 90GB. What am I missing? How did I "use" up so much space in migrating from one Mac to another?

Did you use the Setup Assistant available at the beginning of the new machine's setup process? Or did you use Migration Assistant later after you had set up the new machine?
If you used Migration Assistant, you generally wind up with two accounts (the new one you set up on the new machine plus the old one you ported over) - that may explain your excessive use of space. In that case, you can either manually combine/remove all unnecessary duplicate files, or you can start over by using Command + R, wiping your drive, and downloading the OS. Once it's downloaded, use the Setup Assistant offered at the beginning of the install/setup process.

HT6114 i have a problem with notification of service battery since i installed mavericks. My macbook air is 2012 version.

i have a problem with notification of service battery since i installed mavericks. My macbook air is 2012 version. Any solution?

This from the crash log
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/Accounts.framework/Versions/A/Accounts
Referenced from: /System/Library/StagedFrameworks/Safari/Safari.framework/Safari
indicates there is a missing library on your system. What problems were you having before that caused you to delete Safari? How did you delete it?
You're best bet in this case is to re-install the OS. While doing a re-install will not normally harm your user data having a good working backup in cases like this is essential.

Just received a new Ipad Air, but IOS version is older than current IPad...can not load backup...How do I upgrade IOS version?

Just received a new Ipad Air, but IOS version is older than current IPad...can not load backup...How do I upgrade IOS version?

In order to upgrade the new Air 2, I had to select "set up as new" from the menu. So, after the IOS upgrade is done, how do I "restore" the data that is backed up on icloud from my old Ipad? I don't see a menu item for that . . .
Thanks

Does the iPad mini/air wifi cellular version carry worldwide 1 year warranty?

Does the iPad mini/air wifi cellular version carry worldwide 1 year warranty?

My point is the iPads wifi+cellular version is worldwide warranty? Why apple states below on web?
IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.

Persistent message saying browser version isn's supported etc. etc.

persistent message saying browser version isn't supported etc. etc.
How do I fix that?

https://discussions.apple.com/docs/DOC-6413 and Apple menu -> About This Mac should help you identify the machine.

StageWebView crashes Adobe AIR on iOS when assigning it a stage

I'm having a problem with StageWebView on iOS (in Android it works fine). More exactly, It's an iPad app.
I'm loading a dynamic PHP URL with StageWebView's loadURL method, and then I start building Flash interface elements in a left column (the StageWebView browser is in the right column), which works fine, then I wait a couple of seconds for the page to load (with a Timer), and then I finally show the browser to the user with:
this.webView.stage = this.stage;
The moment I run that line, the whole iOS application crashes and the iPad goes back to its desktop (I suppose that should never happen in Adobe AIR no matter what you do).
But the process is still in memory, since if I double click the iPad physical button, I can see my application icon in the running apps bar (though if I click the icon, the app starts from the beginning, instead of resuming).
Using AIR 2.6. Any ideas on how to solve this crash?
Thanks.

Thanks for the link. I've checked it, but the differences listed are not relevant in my app, I think.
Yes, I know there is also the "Event.COMPLETE" event, but I can't use that because it only fires after the page is fully loaded, with all its images, and the page I'm trying to load has 200 images or so and takes almost a minute to load, so I can't have the user wait that long. I just want to wait until the HTML has loaded.
Anyway, I've also tried Event.COMPLETE and after the long wait, the app still crashes when trying to show the StageWebView.
I've even tried a complex solution, by using StageWebViewBridge by Pedro Casaubon to communicate with the JavaScript in the page, using JavaScript's "DOMContentLoaded" event, so it fires as soon as the HTML (but not the images) has loaded. That works, but as soon as I make the StageWebView visible by assigning it the stage, AIR crashes!
So, AIR crashes when trying to assign the stage to the StageWebView object in all these three cases:
- After waiting for AS3 Event.COMPLETE event listener added to loadURL()
- After waiting for JavaScript "DOMContentLoaded"
- After waiting for a fixed period of time set with a Timer event
The only way AIR doesn't crash when assigning the stage to StageWebView is NOT waiting at all. That is, running the loadURL function and immediately running the "this.webView.stage = this.stage;" line to show the StageWebView object in the stage. In that case it works, but it shows some ugly white box in the StageWebView area while loading, which I was trying to avoid, plus JavaScript events don't work until the page is loaded.
All those crashes described above are most likely a bug in Adobe AIR, but I don't know how could somebody else reproduce it since it could be caused by anything (the dynamic PHP page I'm loading, the JS code, something in the AS3 code, though I don't think that code has anything out of the ordinary...)
Also, when I test the app with ADL in the PC, everything works as expected. The crashes only happen in the iPad (it's an iPad 2).

New MacBook Air vs previous version- processor speed?

I was going to exchange my < 2wk old MacBook Air for the newer version. the new one has better battery life but it looks like smaller processor? 1.3 GHz vs the 1.8 that I have. How much difference is this?

500HMz is actually a pretty big difference... especially in this range. Depending on your use though, it's entirely possible you would never notice. Besides improved battery life, the new Air also has significantly better graphics performance (about a 40% increase). What do you typically use your MacBook Air for? If you use processor intensive applications, you may want to stay with your current model. If you do things that involve graphics, the newer model might be a better option.
Basically... you might have one car that can go 200 miles per hour... and one that can go 150 miles per hour. But maybe you only ever need to go up to 70 miles per hour. Basically, they would both meet your needs as you'll never need the full power of either. That's how you can look at the difference in the processor performance. Just because one is lower, doesn't mean it will perform differently in your daily tasks.
I personally would probably go with the newer model (especially since you're still within the 2 week return period). The boost in graphics performance and the reduced energy use would outweigh the difference in processor speeds.

Browser compatibility for Adobe AIR (browser-based version)

Hi there,
I'm using RoboHelp 10 to create the browser-based version of Adobe AIR. My understanding is that this version of AIR uses Flash for some of the navigation, such as the table of contents.
Can anyone else share their findings on which browsers and Flash plug-ins will reliably display the browser-based version of AIR? I've found that it displays fine on IE 8, but not IE 9, and not Google Chrome (version 23).
Any advice would be appreciated.
Robert

Hi Peter,
I've spent more time looking at my project and I am not getting the results I need.
To summarize, I've created a browser-based version of Adobe AIR that is a local copy. It runs fine on IE 8, but not Google Chrome (version 23) or IE 9. I've also tried created a very small second RoboHelp project and I get the same results--the index.htm page is blank in Chrome and IE 9.
In Chrome, I've double-checked that it is running Flash version 11.5.31.5. I've noticed that Chrome changes my file path (see attached screen capture).
I'm at a loss to figure out why this is not displaying, as expected.
Any suggestions would be much appreciated.
Robert

Adobe AIR compatible devices/versions?

I was wondering which android devices and/or versions work with Adobe AIR. I was also wondering this due to the error messages I receive when I try to download it. Attached is a screenshot of the tech specs of my tablet as well as screenshots of the error messages I receive when trying to download Adobe AIR.
If anyone happens to know the answers to these questions, i would be greatly appreciative. Thanks.
Thomas

The system requirement for AIR on iOS are
iPod Touch 4th generation, iPhone 3GS or 4, iPad
OS 4 or later

Persistent Air 3.3 version watermark / textfield on stage

Similar Messages

Maybe you are looking for