Persistent Image problem

Okay, I just had the screen on this iMac replaced because of this problem with a dark line at the top of the screen. The screen has been replaced, and the dark line isn't there anymore. However, I am now having persistent image problems. This is noticeable when I use the Aurora desktop. If I have a window open (e.g. Safari) for a long enough time, and then I X out of it, I will see a shadow/ghost of it. It's most noticeable with a dark background. However, I DID change some of the settings in "Appearance," so I wonder if that might have done it. But I can't see a way to change everything back to default. Do you know if there's a way?

Hi again - a couple of ideas:
If you haven't printed the images or a while, it could be that you prepared them under a previous version of the Aperture raw and they've since been reprocessed, resulting in a slightly different look
I had an occasion about 12 months ago when an update to the Epson printer drivers caused me to have to go back and change my print setups in Aperture, due to new colour interpretations. Don't know why, but it happened... maybe your settings have changed since last printing?
Could be that you did or didn't have the appropriate soft-proofing turned on - are you using this feature?

Similar Messages

Strange short-term persistent image problem

Hello,
I'm well aware of the typical image persistence problem, where an image can stay "burned in" after the monitor displays the same thing for hours on end.
I have a much shorter-term persistent image problem. Let's say I open a web-page, leave it open for 10 seconds and then open a new window in Safari (thus getting a pure white page). Well when that happens, the previous web-page is still shadowed on the new white.
30 seconds later it has faded, but then the same thing will happen again with anything else that's displayed.
Any ideas?
thanks
Loa

Huh, now I'm really stumped. The cyan border is also present in FCE once I render, but it doesn't seem to happen for each instance when the paper image is used. Did you import the paper image as a .gif or something else? And did you add any filters to it? Did you also add any effects? The only I'm using with the paper image is the page peel and I have not tried any other effects to see if the cyan effect comes up.
I've put a screen capture of my FCE project showing the cyan border present in the canvas as my movie is playing. Its on my idisk as FCE movie problem.tiff
http://idisk.mac.com/gindacu-Public?view=web
Thanks again for the help.

Image problem in V4.0

Hi,
Previously I had lots of problems with showing a BLOB image from a table
in a report using the apex_util.get_blob_file_src function.
Varad put me right on several ocassions: see the thread at
Confusion with get_blob_file_src
Eventually everything went well, and I got my images of a specific size on the screen.
In the last month or two, the host database that I rent went up from version ten to version
eleven, and the apex version changed too from 3.2.1 to some version of 4.
I've only now discovered that the images don't display any more. I've re-read the thread
mentioned above but can see no deviation from Varad's sterling advice. It still doesn't work,
so my current guess is that something has changed when Apex went to its new version.
Can anyone point me in the right direction regarding Image problems in version 4 ?
I guess I'm not the first to experience such issues, and a checklist of things to try would
be most welcome.
I've done a View->Source on the page that doesn't work, and the issue with a missing value
for the "d=" parameter on the apex_util.get_blob_file seems to have recurred:
src="apex_util.get_blob_file?a=130&s=1718106956127950&p=13&d=&i=25615931827270369&p_pk1=5&p_pk2=&p_ck=947078FC54BB5126E7E0D19F8A24C416"
Suggestions welcomed please; thankyou in advance.
Mungo

Hi Folks,
I've found a solution to my "image" problem that caused this thread, hence the decent thing is to
post it here.
I read various other threads and stumbled across:
PDF viewing with apex_util.get_blob_file_src not working with 4.0
PDF viewing with apex_util.get_blob_file_src not working with 4.0 &# 4404695
That thread mentioned the requirement for an "Automated Row FETCH" process as well as having
an "Automated Row PROCESSING" process too.
I had the latter, but didn't have the former, so throwing caution to the wind I tried adding a dummy
Automated Row Fetch process and the damn thing worked!
Haven't got a clue why on earth either of these are requirements on a page that is selecting data
from the database - I don't understand where such processes are called in the big scheme of things.
That's just me baiting some kind soul to spell out the fundamentals for this idiot... please?
Happy to be corrected on any points.
Regards until the next crisis...
Mungo :-)
P.S. How come there is no reasonable way to get the URL of a single post in a thread - I'd like to give
reference to the single post that helped me, but all I seem to be able to get is the whole blooming thread.
Suggestions?
Edited by: MungoHenning on Sep 15, 2010 1:39 PM

Photosmart D110 All-In-One Printer - Shadow image problem

I have been having a problem with this printer, ever since we purchased it about 2 months ago, where it will print a shadow image of text or pictures on some documets but not others. It is specific and consistent in that it will print this shadow image on some documents every time and on other documents none of the time. I have a PC and a Mac and it doesn't matter which computer I use, only which document. Sometimes it is only a part of a document, like the computer generated part of an email where it says " this person at this time on this date wrote.." but the other text will be fine. It happens on some coloring pages but not others. I spent 2 hours on the support line yesterday; it's still doing it. She had me unplug it, take off the printer software and reinstall it, update software (on my Mac) and it did not fix it. Any ideas on what may be causing this & how to fix it? I like the printer but am about to return it because of this problem. The printer we had been using was an HP C4280 and did not have this problem. I'd like to keep the printer if I can fix this problem.

I'm having the same shadow imaging problem on my Deskjet F4580, so if anyone knows how to correct it please post.. I've reinstalled/updated the driver, disabled advanced features, and deslected "Enable HP Real Life Technoliges".

Passwords and images problem

Firefox image problem. In Firefox 3.6.12, every time I save an image that's already displayed on my screen, I see "one active download" appear in the bottom right of Firefox's window and the same image is also listed in downloads. The problem is that Firefox doing that uses more bandwidth. How do I set Firefox so that when I save an image, instead of that image getting re-downloaded from where it's stored on the internet, it's copied from wherever Firefox has it stored to display it so Firefox doesn't use as much bandwidth? Tools/options/advanced/network/offline storage is set to 50mb.
Firefox password problem. Tools/options/security/passwords has "remember passwords for sites" checked and there is nothing in my exceptions list. But Firefox keeps forgetting passwords, usually after restarting Firefox and or my whole system and on some sites, I don't even get asked "do you want to remember..." How do I fix this?
I do have CCleaner and it's set to run at startup, but all the boxes for Firefox are unchecked, so it's not the cause of either problem.

@cor-el
OK, I'll give that extension a try and see what happens, thanx! :-)
@venemovil
I right click and either select "save image as" or if I want to save an image to more than one location, I select "view image" and then use ctrl+s. Both results in Firefox re-downloading the image as I described above. It happens on every site I visit.
The password problem never happened before, but I will try disabling my extensions one at a time and see if it happens only whan a particular extension is turned on.
This is a screenshot of the extensions I do have installed.
http://i273.photobucket.com/albums/jj216/Moonbarker/Clipboard01.jpg
I've also noticed that Firefox is forgetting what sites I've visited recently (I type in part of the url of sites I've visited sometimes as recently as a few hours ago and the entire url isn't in the suggested list) and I keep having to put the Fire FTP Button back in the toolbar (next to the home/stop/reload/back-forward buttons). That may be related to the pasword problem. I don't know.

Website images problem

Hi there,
I installed the latest version of Firefox. However, some websites I'm having some image problems. For example http://www.e-masifpanel.com web site with a phone number in the upper right corner of the space. In this area the way it looks on my Firefox browser line. I remember the moment some photos do not appear on other websites. Does version issue or problem, a problem with my my settings be? Thank you.

Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
Make sure that you allow pages to choose their own colors.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
Note that these settings affect background images.
See also:
*http://kb.mozillazine.org/Website_colors_are_wrong

Video image problem

Hi...A neighbor has a iMac G5 and has developed a video/image problem. The iMac boots up and sometimes shows an ok screen for a little time, sometimes not. What emerges is an array of digital black on white graphic line images (maybe I should upload a picture), but makes the screen virtually impossible to see what you want to view, thus rendering the computer useless.Any thoughts as to what this is, seems like a hardware vs, software issues, but can't say for sure. What might it be: video card, other hardware on or attached to the logic board..and mostly could it be repaired (by self or reasonable). Any and all thoughts or experience welcome as I've been no help to my good neighbor friend on this one:)..Rick

me 2 it's clear .. the new firm has poor quality than the original one...sadly .. my n93i now has quality like n70 help!!!!!!!!!!!!!!!!!!!!!

Imaging problem LR 2.7

Has anyone seen this issue arise on images that were imported ok, then all of a sudden Lightroom image rendering will only do this?
The source file appears okay as this does not happen when viewed with alternative viewer programs. However, the exports usually (not always) also look like this.
What is this imaging problem called?
I've never had this issue before, but it's started to occur with frequency ever since I've moved... only mystery is: I have all of the same equipment including camera.

folks thanks for all fo the advice, but... I think I've discovered the problem: VISTA + External Hard Drive = Picture and file corruption
I should have known: the problem is MICROSOFT!!!!! For the first time in my life, I thought seriously about switching to Apple (but then I would switch to Aperture).
Here are the old discussions. Given the dates on these, apparently, I must be a rare person left on Vista.
http://www.vistax64.com/vista-music-pictures-video/136646-image-corruption-using-external- drive-vista.html
http://social.technet.microsoft.com/forums/en-US/itprovistadeployment/thread/6ffcb5b7-ac72 -49ab-9a89-77e730db75b2/
So 3 external hard drives tested with the entire set of nearly 400 GB of pictures, videos and files.
All showing varying degrees of picture corruption, and now I've discovered video corruption as well.
My problem is, I deleted the original internal hard drive files, so I'm left with only one 1st copy, the other two are copies of copies and worse off.
I'm taking the leap.... upgrading to Windows 7 tonight. I'll let you know what happens.

Macbook pro retina ghost image problem

I have heard about the burn-in problem on macbook pro retina display especially on LG screen. After I got my macbook retina for 3 months, the ghost image problem become really really unacceptable. After 4~5mins, the image on screen will burn in obviously for quite a long time. IT IS VERY OBVIOUS!! So I drop by apple store and find a genius, he did a persistence test on my macbook. The test is under a very low brightness, and I can not even know how he was operating. After 6 minutes, he said there is no burn-in problem. He explained that, if my macbook pass the test, it means my screen is within inspection. But I can tell if this screen is good, APPLE you should take a look at your inspection and change it RIGHT NOW. Everyone of my friend who have seen the problem on my screen says it is unacceptabe, how can it be within inspection? If anyone need a photo of that, i will provide.

MoonnooM wrote:
I have made an applecare call appointment. I'll post the result after I make the call. Thank you.
Good work...
Back-up all your data.
If they replace your MacBookPro, you can avoid a service charge for runniing the back-up for you.

Macbook pro retina with ghost image problem

Can i claim my retina display that have ghost image problem?

Hi there, I had the same problem with my Macbook Pro 15`` Retina. And here is how you can find out if you have ghost image problem. There are two retina display manufacturers for Macbook Pro Retina`s LG and Samsung. And if you are luck you will have the Samsung Retina Display on your mac. Here is how you can find the manufacturer for you Macbook.
Go to your Applications folder and launch Terminal. Paste in the following and hit return:
ioreg -lw0 | grep "EDID" | sed "/[^<]*</s///" | xxd -p -r | strings -6
Look at the beginning of the second line to see which manufacturer made your display. If it starts with LP then you have an LG display. Samsung displays start with LSN.
If your display shows LP you might have this problem for sure. So here is how you can test your screen.
A simple test to check your Retina MacBook Pro display for image retention also reported as "ghosting"
http://www.mitchmalone.name/retina-test/
Run the test for 10 Min. and you will find out if you have this problem.
And if you have it, and if you are still under waranty the Apple will replace the display with Samsung for free of charge. I hope this information helps.

Touch persistently crashing - problems with USB/iTunes/Windows 7?

Hi!
I received a 64gb Touch for Christmas and have a persistent crashing problem. The Touch appears to be randomly crashing across any app or even just playing music - there seems to be no common link. This could be once in a few hours or repeatedly 4/5 times in succession.
It's possible I have a faulty unit but wonder also if I may have an issue with updating/syncing as any sync that takes a reasonable amount of time disconnects and reconnects several times. I had this on my 1st gen Shuffle also - it's almost as though something is disconnecting the USB port and then reconnecting it. I'll mention at this point that I have no other USB related issues - I can run a backup of several hours to a USB harddisk and have no issues and no other USB device has had any sort of problem. If there is a USB issue, it's only happening with iTunes and my iPod(s).
My theory then is that the initial upgrade of the Touch to 3.1.2 on first sync is being corrupted in some way because of the disconnecting issue and that then is causing the crashing as the os is unstable. The Touch has been reinstalled 3 times since purchase and each time having the disconnection issue appear and the resulting persistent crashing.
Hopefully someone can tell me I'm wrong/right in my theory and maybe suggest a way I can fix the disconnection problem so I can at least try a clean reinstall of the Touch and see if that solves the crashing problem before I send the unit back.
Cheers!

I bought my iPod Touch 32gb last week and as soon as I plugged it in iTunes told me to update to v3.1.2 (came with v3.1.1 installed.) I accepted to install v3.1.2 and it finished installing then restarted. It flashed up in iTunes then disconnected and the ipod went blank, then came up with the apple log for about 1 or 2 minutes, then flashed up again in itunes. It then kept restarting and dissapearing. I left it doing this for about 15 minutes then unplugged the usb lead. It then restarted and all seemed fine.
I had put a couple of albums on. Then I sorted out some more music and done another sync & the **** thing got stuck in the restart loop again.
This was on my laptop which has Windows vista.
I then thought maybe the update to v3.1.2 had gone wrong so i reinstalled it on my main pc. It didn't get stuck in the restarting loop so I thought I had solved the problem. I put my music on my main pc (Windows 7) and done a resync and the blasted thing got stuck in restart loop again.
My son bought his 8GB touch this week and his came with v3.1.2 allready installed and he hasn't had a single problem with it. I hadn't downloaded any apps for mine but he has loads of them and it hasn't crashed once.
I am taking mine back to the shop tomorrow as i have had it less than 10 days.
Am not sure what it is but it is very annoying. I hope the replacement i get works properly.

Error-1074396120 Not an image, problem with IMAQ Learn multiple geometric patterns

Error-1074396120 Not an image, problem with IMAQ Learn multiple geometric patterns
Hi!
I've tried to modify the example of "multiple geometric patterns matching" , and just use two patterns, but when I run the VI this error appear and I doon't know how to solve it! , the error appears in the "IMAQ Learn multiple geometric patterns" block.
Running on:
- labview 32 bits
- windows 7 64 bits
- usb camera 2.0
Any sugestion would be helpful..... ! Regards
Attachments:
template_12.png ‏150 KB
template_11.png ‏123 KB
vision_multiple_pattern_matching.vi ‏127 KB

thanks all for your replies, the problem was on my template images, I had to give them information about the pattern matching, and I did it with NI Vision Template Editor, within Vision utilities, and I chose template with Feature Based.
Thank you again and Regards!

Need to get rid of persistent images created with as3 - pls help

I have used the following as3 code, courtesy of Jody Hall at theflashconnection.com . It's a drag and drop that works great. Problem is the drag and drop images persist when I move on to other frames. How do I clear the images when finished so they don't appear in subsequent frames? Thank you in advance.
import flash.events.MouseEvent;
import flash.display.MovieClip;
import flash.media.Sound;
import flash.media.SoundChannel;
var sndExplode:explode_sound;
var sndExplodeChannel:SoundChannel;
var dragArray:Array = [host1, agent1, physical1, social1, host2, agent2, physical2, social2, host3, agent3, physical3, social3];
var matchArray:Array = [targethost1, targetagent1, targetphysical1, targetsocial1, targethost2, targetagent2, targetphysical2, targetsocial2, targethost3, targetagent3, targetphysical3, targetsocial3];
var currentClip:MovieClip;
var startX:Number;
var startY:Number;
for(var i:int = 0; i < dragArray.length; i++) {
    dragArray[i].buttonMode = true;
    dragArray[i].addEventListener(MouseEvent.MOUSE_DOWN, item_onMouseDown);
    matchArray[i].alpha = 0.2;
function item_onMouseDown(event:MouseEvent):void {
    currentClip = MovieClip(event.currentTarget);
    startX = currentClip.x;
    startY = currentClip.y;
    addChild(currentClip); //bring to the front
    currentClip.startDrag();
    stage.addEventListener(MouseEvent.MOUSE_UP, stage_onMouseUp);
function stage_onMouseUp(event:MouseEvent):void {
    stage.removeEventListener(MouseEvent.MOUSE_UP, stage_onMouseUp);
    currentClip.stopDrag();
    var index:int = dragArray.indexOf(currentClip);
    var matchClip:MovieClip = MovieClip(matchArray[index]);
    if(matchClip.hitTestPoint(currentClip.x, currentClip.y, true)) {
        //a match was made! position the clip on the matching clip:
        currentClip.x = matchClip.x;
        currentClip.y = matchClip.y;
        //make it not draggable anymore:
        currentClip.removeEventListener(MouseEvent.MOUSE_DOWN, item_onMouseDown);
        currentClip.buttonMode = false;
        sndExplode=new explode_sound();
        sndExplodeChannel=sndExplode.play();
    } else {
        //match was not made, so send the clip back where it started:
        currentClip.x = startX;
        currentClip.y = startY;
DRAG AND DROP (I JUST DID THE LAST FOUR FOR THIS EXAMPLE)
MOVING ON TO NEXT FRAME, YOU STILL SEE THE RECTANGLES.

Thank you SO muchNed Murphy
I'm a newbie to AS3 and I was trying to figure it out for past 2 weeks that why did swapChildren or setChildIndex or addChild, all of these made my Target Movieclip remain/duplicate/persist on the stage even after the layer containing the Target Movieclip has blank keyframes. I surfed so many forums and tutorials for the answer but turns out it was my lack of knowledge of basic concepts. I remember checking out this specific forum as well past week but due to it being "Not Answered" I skipped it. This should be marked as a "Correct Answer", The Empty MovieClip did the trick!
I needed this solution for a Drag and Drop game, so that the current item that is being dragged is above all other graphic layers. And when all items are dropped on their correct targets, there is gotoAndPlay to Success frame label.
I created a movieclip on the top layer with the same dimensions as the stage and put it at x=0 y=0 position. Instance name: emptymc
And deleted the emptymc from the timeline during the Success frame label.
Here is some code I used,
1. MovieClip.prototype.bringToFront = function():void {
   emptymc.addChild(this);
2. function startDragging(event:MouseEvent):void {
event.currentTarget.startDrag();
event.currentTarget.bringToFront();
I didn't know how to put the addChild and refer to the currentTarget in the startDragging function itself, for example
emptymc.addChild(event.currentTarget);
- This one didn't work inside the startDragging function "emptymc.addChild(this); "
Is there a correct way I could have done it properly?
Thanks,
Dipak.

"Load Files into Photoshop Layers" persistent misalignment problem

I'm having a persistent problem which technical support was unable to resolve after being on the phone with them for 1.5 hrs.
I'm working in Bridge CC in ACR, synchronizing all parameters incl. crop, transform, exposure, etc. of a bracketed group of images shot from a solid tripod. When using the Tools / Photoshop / Load files into Photoshop layers command, the images open in photoshop in a layered file, BUT some are knocked out of alignment. Actually they have been cropped slightly smaller than the original file, always by the same number of pixels. Sometimes all layers are affected, sometimes not. Photoshop and Bridge are both up to date, as is the camera raw plugin. I’m on a new iMac i7 4-core, OSX 10.9.4. All software was newly downloaded from Adobe less than two weeks ago. I have reset preferences, even uninstalled and reinstalled Bridge CC 6.1.0.115 to no avail. Any suggestions?

Hi JJMack - I just re-read your post. For some reason I thought you were suggesting to make sure "Open documents in Tabs" was selected, it was. Now I realize you were suggesting to turn it off! As another attemp to solve this problem I did de-select it today. Seemed to work for a good while. I was getting very excited, then, on the last set of images I had to do it displayed the same problem. But, it did go for quite a while without failing, and when it did I was thrashing about trying to make another app active. When loading documents like this - with "Open documents in Tabs" de-selected, Photoshop wants to put the loading images as the front-most window, no matter what other apps (Bridge, email, web etc) I click on in the dock. I think it is related to the bug you described effecting the "load files to stack" command.
Hopefully Adobe is looking at this - mind you, I have read reports of people having this problem in CS5! Looks like that was never resolved sadly.
I'll keep testing and post back.
I am looking to upgrade my video card to see if it's a video memory thing.
What is very weird though is the fact that this problem didn't present itself until after several weeks of working with this command with no problem. No additional apps installed, nothing changed. Why would it start happening only after a while?
Thanks again for your suggestion.

T400 faint image problems and dark, leds off inverter

I have a 6475-BC1 t400 the problem is: does not show image on screen, the front leds off, connect an external display and the picture is normal, they proceeded to change according HMM systemboard iverter and the problem persists, the screen proved on another computer and operating normally. time change is also behind the LCD cable and inverter, pending any Suggestion Thanks

LED panel doesn't have inverter as such. This problem is either LCD, motherboard or the LCD cable.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Persistent Image problem

Similar Messages

Maybe you are looking for