Persistent store migration failed, missing source managed object model.

I downloaded the new Desktop Manager and all seemed to go well (I did a backup), until I tried to sync the address book with my new 8120.  I then got an error message 'Persistent store migration failed, missing source managed object model', followed by a failed to sync message. Having had my calendar corrupted by the leaked version I didn't want to risk that.
I don't want to be too negative, but after many years of being a Palm user my Blackberry experience so far has been a nightmare.
Anybody else having problems? 
Solved!
Go to Solution.

You had the leaked version installed? Did you still have it installed when you installed the official version? If you removed it, what steps did you take to remove it?
I would like to get some more details:
Mac OS version:
Device software version:
Device model:
Carrier:
Are you using BIS, BES or both?
The only stupid question is the one you don't ask before you reboot the BES.

Similar Messages

  • Error Message "Persisten​t store Migration Failed"

    Dear Users:
    I have a Curve 8330.  When attempting to back up my Blackberry, I get the
    message ³Persistent store migration failed, missing source managed object
    model.²  What does this mean and why can¹t I backup my Blackberry to the
    MacBook address book?
    Thanks,
    Glen

    I can help you to solve your problem, just follow the next steps: 1.- Get the unit into the “Support Menu” by following the steps below:A.- Press and hold the “*” and  “#” keys at the same time then release both keys.Display should say “Enter Special Key Combo”B.- Press and release in sequence the “1”, “2” and “3” buttons.  Once in the menu, follow the next steps:2.- Press and release the right arrow button twice.3.- Display should say “System Configuration Menu”.4.- Press and release the “OK” button.
    5.-Display should say “Hardware failure status”. If not there already, press Arrow Key over to “Hardware failure status”,
    6.-Press and release the “OK” button.
    7.-Display should say “Hardware failure status: Clear. Press OK to clear”. 
    8.-Press and release the “OK” Button. The message changes to “Hardware failure status Cleared. Press Cancel to continue”.
    9.-Press and release the “CANCEL” button as many times until the “Welcome to Photosmart Express” window appears.
    10.-Turn the unit on and then off, continue with the installation/setup of the unit. If this error continues then the unit may have any other problem. Let me know if this solved your problem.

  • Supplemental/vda-migrate fails: missing com/sun/vda/service/TextCipher

    Hi,
    just tried vda-migrate to upgrade my test installation (single host) from vda_3.0 to the new 3.1 version.
    This fails as seen below (added -verbose:class to the line calling java in vda-migrate:doExport).
    Any idea where class 'com/sun/vda/service/TextCipher' could be found (at least it's not defined in
    any .jar-file in vda_3.{0,1}/Solaris_10+/i386/Packages/SUNWvda*...)
    Kurt
    [Loaded java.security.cert.Certificate from /usr/jdk/instances/jdk1.6.0/jre/lib/rt.jar]
    [Loaded com.sun.vda.migrate.VdaMigrateExport from file:/var/home/ks/vda_3.1_image/.install/vdamigrate.jar]
    [Loaded java.io.FileNotFoundException from /usr/jdk/instances/jdk1.6.0/jre/lib/rt.jar]
    [Loaded java.util.Queue from /usr/jdk/instances/jdk1.6.0/jre/lib/rt.jar]
    [Loaded java.util.Deque from /usr/jdk/instances/jdk1.6.0/jre/lib/rt.jar]
    [Loaded java.util.AbstractSequentialList from /usr/jdk/instances/jdk1.6.0/jre/lib/rt.jar]
    [Loaded java.util.LinkedList from /usr/jdk/instances/jdk1.6.0/jre/lib/rt.jar]
    [Loaded java.util.LinkedList$Entry from /usr/jdk/instances/jdk1.6.0/jre/lib/rt.jar]
    Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/vda/service/TextCipher
    Caused by: java.lang.ClassNotFoundException: com.sun.vda.service.TextCipher
    at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
    [Loaded java.lang.Shutdown from /usr/jdk/instances/jdk1.6.0/jre/lib/rt.jar]
    [Loaded java.lang.Shutdown$Lock from /usr/jdk/instances/jdk1.6.0/jre/lib/rt.jar]
    Could not find the main class: com.sun.vda.migrate.VdaMigrateExport. Program will exit.
    Data exported to directory '/tmp/asdf'
    After installing and configuring Sun VDI 3.1 execute '/opt/SUNWvda/sbin/vda-migrate -i /tmp/asdf'
    A log file is available at '/var/adm/log/vda-migrate.2009_09_15_21:47:25.log'.

    Hi,
    The VDI upgrade from 3.0 to 3.1 is not supported in 3.1 Early Access version.
    vda-migrate 3.0-->3.1 will be available only in the 3.1 final release.
    Thanks,
    --Chirag                                                                                                                                                                                                                                                                                                                                                       

  • How can we provide suggestions/feedback to MS for improvements to the object model interfaces for Transport Agents?

    Having worked on TA's for a while now we've found there are several things missing in the object model for our requirements. Consequently we have some horrible code that need to do some things directly either with MIME or TNEF - which is a crying
    shame as MS must have all the code to do the things we need anyway, it's just that the object model is deficient.
    It'd be useful if there were an Exchange category on MS Connect where we could submit our suggestions, but as far as I can see, there isn't one.
    So, where do the Exchange TA developers get to hear customer feedback?

    Hello David,
    Sorry for not getting back to you sooner. You can provide feedback on Transport agents by using this site:
    http://officespdev.uservoice.com/.
    With regards,
    Michael | Microsoft Exchange Developer Content
    The
    Exchange Development Forum Guide has useful information for using the Exchange Development Forum.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Collect metrics failed because 'Query Datacenter Managed Object Reference' is not executed

    Hello,
    This is my first post on this forum; I am working for a Cisco partner.
    I am working on Tidal Enterprise Orchestrator 2.3.0.441 (hotfix1 and 2, content update 1), part of CIAC starter edition.
    Scheduled Collect metrics failed in 'vSphere Datacenter Sync' and in 'vSphere Cluster Data Sync' parts
    Problem is at the level of 'Query Datacenter Managed Object Reference'
    Input is Datacenter name (well defined, value is not '*'), but this box is not executed (stay white). Next box : 'Set Datacenter MOR' define a variable with value 'Datacenter-' instead of 'Datacenter-[output of Query Datacenter Managed Object Reference]. And finally 'Create Cluster table" failed because a root element is missing (the datacenter name)
    So my question is why 'Query Datacenter Managed Object Reference' is not executed ?
    I change nothing in the workflow, and Datacenter is normally well defined.
    thank you for your help,
    Cheers,
    Nicolas

    This particular utility workflow is set to not-archive completed instances.
    This means that, after it finishes, it is not saved to the database and you can't see the runtime information. It improves performance and saves database space, but does make troubleshooting a little more roundabout.
    You'll want to turn on archiving temporarily to see what the error message is.  Open the process, go to the Options tab, and check the "Archive completed instances" box.

  • Workbook: Document store operation failed due to missing authorization

    Hello authorizer gurus,
    I have got 3.5.
    I have transported.
    I try to open a workbook.
    I am getting a Error Message:
               Document store operation failed due to missing authorization
    Newly saved Queries as workbook can be openend.
    What's wrong ?
    Thank You
    Martin Sautter

    Martin,
    To get a detailed message about the error (including which authorization objects the user needs to have to be able to perform the action that caused the error) use ST22. It sounds like they are missing the Open authorization for workbooks.
    Cheers,
    Rusty

  • Failed to create deployable object '********' since it is not a Web Dynpro object - Migration from 7.0 to 7.4

    I have installed NWDS 7.30 EHP1 SP 14 PAT000   with JVM 6 SAP AG
    to   migrate wedynpro development components from 7.0 to
    NW7.4 WAS SAP AG 1.6.0_85 on Windows Server 2008 R2 6.1  SP09 PAT000
    In track imported below SCAs of version  7.31 SP14 .
    Could able to migrate and build in NWDS, getting deployment errors.
    Followed   
    http://scn.sap.com/docs/DOC-55584 
    and   
    http://scn.sap.com/community/nwdi/blog/2014/03/26/nwdi-vs-nwdi-content 
    COMP_BUILDT
    ECM-CORE
    ENGFACADE
    ENGINEAPI
    ESCONF_BUILDT
    FRAMEWORK
    MOIN_BUILDT
    SAP_BUILDT
    WD-RUNTIME
    Deployment Errors:-
    com.sap.engine.services.dc.api.deploy.DeployException: [ERROR CODE DPL.DCAPI.1027] DeploymentException.
    Reason: ASJ.dpl_dc.001085 Operation [deploy] of [XXXXXXX.com_home~chgemail] failed
        at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deployItems(DeployProcessorImpl.java:862)
        at com.sap.engine.services.dc.api.deploy.impl.DeployProcessorImpl.deploy(DeployProcessorImpl.java:259)
        at com.sap.ide.eclipse.deployer.dc.deploy.DeployProcessor70.deploy(DeployProcessor70.java:105)
        at com.sap.ide.tools.services.dc.EngineDcDeployService.deployFiles(EngineDcDeployService.java:257)
        at com.sap.ide.tools.services.dc.EngineDcDeployService.deploy(EngineDcDeployService.java:135)
        at com.sap.ide.dii05.ui.internal.actions.dc.DcDeployAction$5$1.run(DcDeployAction.java:282)
        at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
    Caused by: com.sap.engine.services.dc.cm.deploy.DeploymentException: ASJ.dpl_dc.001085 Operation [deploy] of [XXXXXXX.com_home~chgemail] failed
        at com.sap.engine.services.dc.cm.deploy.impl.OnlineDeployProcessor.performDelivery(OnlineDeployProcessor.java:246)
        at com.sap.engine.services.dc.cm.deploy.impl.BulkOnlineDeployProcessor.deploy(BulkOnlineDeployProcessor.java:67)
        at com.sap.engine.services.dc.cm.deploy.impl.AbstractDeployProcessor$DeployProcessorHelper.visit(AbstractDeployProcessor.java:282)
        at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:84)
        at com.sap.engine.services.dc.cm.deploy.impl.AbstractDeployProcessor.deploy(AbstractDeployProcessor.java:100)
        at com.sap.engine.services.dc.cm.deploy.impl.DeployThread.run(DeployThread.java:39)
        at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
        at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
        at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
    Caused by: com.sap.engine.services.dc.gd.DeliveryException: [ERROR CODE DPL.DC.3297] Operation [update] of [sdu id: [XXXXXXX.com_home~chgemail]
    sdu file path: [E:\usr\sap\SN3\J00\j2ee\cluster\server0\temp\tc~bl~deploy_controller\archives\111\XXXXXXX.com~home~chgemail.ear]
    version status: [HIGHER]
    deployment status: [Admitted]
    description: []
    ] failed
        at com.sap.engine.services.dc.gd.impl.ApplicationDeployer.update(ApplicationDeployer.java:100)
        at com.sap.engine.services.dc.gd.impl.InitialApplicationDeployer.performDeployment(InitialApplicationDeployer.java:141)
        at com.sap.engine.services.dc.gd.impl.InitialGenericDeliveryImpl.deploy(InitialGenericDeliveryImpl.java:57)
        at com.sap.engine.services.dc.cm.deploy.impl.OnlineDeployProcessor.performDelivery(OnlineDeployProcessor.java:213)
        ... 8 more
    Caused by: com.sap.engine.services.deploy.server.utils.DSRemoteException: ASJ.dpl_ds.006193 Operation [update] of [E:\usr\sap\SN3\J00\j2ee\cluster\server0\temp\tc~bl~deploy_controller\archives\111\XXXXXXX.com~home~chgemail.ear] failed
        at com.sap.engine.services.deploy.server.DeployServiceImpl.catchDeploymentExceptionWithDSRem(DeployServiceImpl.java:3370)
        at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:489)
        at com.sap.engine.services.dc.gd.impl.ApplicationDeployer.update(ApplicationDeployer.java:74)
        ... 11 more
    Caused by: com.sap.engine.services.servlets_jsp.webcontainer_api.exceptions.WebContainerExtensionDeploymentException: Error during deployment of application {0}
        at com.sap.engine.services.webdynpro.WebDynproDeploymentHook.onDeploy(WebDynproDeploymentHook.java:52)
        at com.sap.engine.services.webdynpro.webcontainer.extension.ExtensionHandler.onDeployInternal(ExtensionHandler.java:169)
        at com.sap.engine.services.webdynpro.webcontainer.extension.ExtensionHandler.onDeploy(ExtensionHandler.java:129)
        at com.sap.engine.services.servlets_jsp.server.deploy.impl.WebContainerProvider.deploy(WebContainerProvider.java:334)
        at com.sap.engine.services.servlets_jsp.server.deploy.DeployAction.deploy(DeployAction.java:360)
        at com.sap.engine.services.servlets_jsp.server.deploy.UpdateAction.makeUpdate(UpdateAction.java:327)
        at com.sap.engine.services.servlets_jsp.server.deploy.WebContainer.makeUpdate(WebContainer.java:446)
        at com.sap.engine.services.deploy.server.utils.container.ContainerWrapper.makeUpdate(ContainerWrapper.java:409)
        at com.sap.engine.services.deploy.server.application.UpdateTransaction.makeComponents(UpdateTransaction.java:478)
        at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:183)
        at com.sap.engine.services.deploy.server.application.UpdateTransaction.begin(UpdateTransaction.java:234)
        at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:421)
        at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:473)
        at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:1836)
        at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:582)
        at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:487)
        ... 12 more
    Caused by: com.sap.tc.webdynpro.services.sal.deployment.core.DeploymentException: Failed to deploy application 'XXXXXXX.com/home~chgemail'.
        at com.sap.tc.webdynpro.serverimpl.wdc.deployment.DeployableObjectFactory.notifyOnDeploy(DeployableObjectFactory.java:324)
        at com.sap.tc.webdynpro.services.sal.deployment.core.DeployableObjectInternal.notifyOnDeploy(DeployableObjectInternal.java:122)
        at com.sap.engine.services.webdynpro.WebDynproDeploymentHook.onDeploy(WebDynproDeploymentHook.java:49)
        ... 27 more
    Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create deployable object 'XXXXXXX.com/home~chgemail' since it is not a Web Dynpro object.
        at com.sap.tc.webdynpro.serverimpl.wdc.deployment.DeployableObjectFactory.getDeployableObject(DeployableObjectFactory.java:79)
        at com.sap.tc.webdynpro.serverimpl.core.deployment.AbstractDeployableObjectFactory$1.getDeployableObject(AbstractDeployableObjectFactory.java:87)
        at com.sap.tc.webdynpro.services.sal.deployment.api.WDDeployableObject.getDeployableObject(WDDeployableObject.java:43)
        at com.sap.tc.webdynpro.serverimpl.wdc.repository.RepositoryContainerHook.calculateVMOsOfDeployableObject(RepositoryContainerHook.java:264)
        at com.sap.tc.webdynpro.serverimpl.wdc.repository.RepositoryContainerHook.onDeploy(RepositoryContainerHook.java:181)
        at com.sap.tc.webdynpro.serverimpl.wdc.deployment.DeployableObjectFactory.notifyOnDeploy(DeployableObjectFactory.java:297)
        ... 29 more
    Caused by: com.sap.tc.webdynpro.spi.WebDynproRuntimeException: No Web Dynpro application (deployable object) with name XXXXXXX.com/home~chgemail exists.
        at com.sap.engine.services.webdynpro.WebDynproRuntimeServiceImpl.getDeployableObject(WebDynproRuntimeServiceImpl.java:228)
        at com.sap.tc.webdynpro.serverimpl.wdc.deployment.DeployableObjectFactory.getDeployableObject(DeployableObjectFactory.java:77)
        ... 34 more
    Deployment Items status: [
    ----- Sorted Items -----
        1. Client path 'C:\nwds-extsoa-7.3-EHP1-SP14-PAT0000-win32\eclipse\workspace.jdi\1\DCs\XXXXXXX.com\home\chgemail\_comp\gen\default\deploy\XXXXXXX.com~home~chgemail.ear'
            Deploy status is 'Aborted'
            SDA : name 'home~chgemail', vendor 'XXXXXXX.com', location 'SN3_MDTRJS_D', version '20150312060513', software type ('J2EE', sub type ''), csn component '', dependencies :[( name 'tc~aii~base~offline~facade', vendor 'sap.com') , ( name 'tc~ddic~runtime~facade', vendor 'sap.com') , ( name 'tc~bl~logging~api', vendor 'sap.com') , ( name 'tc~bl~exception~lib', vendor 'sap.com') , ( name 'tc~wd~api', vendor 'sap.com') , ( name 'tc~cmi', vendor 'sap.com') , ( name 'tc~bl~jco~api', vendor 'sap.com') ]
    ----- Deployment Items -----
        1. Client path 'C:\nwds-extsoa-7.3-EHP1-SP14-PAT0000-win32\eclipse\workspace.jdi\1\DCs\XXXXXXX.com\home\chgemail\_comp\gen\default\deploy\XXXXXXX.com~home~chgemail.ear'
            Deploy status is 'Aborted'
            Description:'1. Failed to create deployable object 'XXXXXXX.com/home~chgemail' since it is not a Web Dynpro object.
             -> No Web Dynpro application (deployable object) with name XXXXXXX.com/home~chgemail exists.'.
            SDA : name 'home~chgemail', vendor 'XXXXXXX.com', location 'SN3_MDTRJS_D', version '20150312060513', software type ('J2EE', sub type ''), csn component '', dependencies :[( name 'tc~aii~base~offline~facade', vendor 'sap.com') , ( name 'tc~ddic~runtime~facade', vendor 'sap.com') , ( name 'tc~bl~logging~api', vendor 'sap.com') , ( name 'tc~bl~exception~lib', vendor 'sap.com') , ( name 'tc~wd~api', vendor 'sap.com') , ( name 'tc~cmi', vendor 'sap.com') , ( name 'tc~bl~jco~api', vendor 'sap.com') ]
            Time statistics( ms ):
                1.Check version:XXXXXXX.com_home~chgemail : 4
                2.validate : -1
                    2.1.Resolve dependencies : 3
                    2.2.deployment : 7055
                        2.2.1.Notify:Event triggered : 203
                        2.2.2.Bulk deployment : 6839
                            2.2.2.1.Stop : 73
                            2.2.2.2.Perform delivery : 6765
                                2.2.2.2.1.Application Deployer : 6615
                        2.2.3.Notify:Event performed : 9
                    2.3.Post process : 10
                        2.3.1.Starting : 9
    ]      [Error: com.sap.engine.services.tc~bl~deploy~api  Thread[Worker-444,5,main]]
    Deployment Items status: [
    ----- Sorted Items -----
        1. Client path 'C:\nwds-extsoa-7.3-EHP1-SP14-PAT0000-win32\eclipse\workspace.jdi\1\DCs\XXXXXXX.com\home\chgemail\_comp\gen\default\deploy\XXXXXXX.com~home~chgemail.ear'
            Deploy status is 'Aborted'
            SDA : name 'home~chgemail', vendor 'XXXXXXX.com', location 'SN3_MDTRJS_D', version '20150312060513', software type ('J2EE', sub type ''), csn component '', dependencies :[( name 'tc~aii~base~offline~facade', vendor 'sap.com') , ( name 'tc~ddic~runtime~facade', vendor 'sap.com') , ( name 'tc~bl~logging~api', vendor 'sap.com') , ( name 'tc~bl~exception~lib', vendor 'sap.com') , ( name 'tc~wd~api', vendor 'sap.com') , ( name 'tc~cmi', vendor 'sap.com') , ( name 'tc~bl~jco~api', vendor 'sap.com') ]
    ----- Deployment Items -----
        1. Client path 'C:\nwds-extsoa-7.3-EHP1-SP14-PAT0000-win32\eclipse\workspace.jdi\1\DCs\XXXXXXX.com\home\chgemail\_comp\gen\default\deploy\XXXXXXX.com~home~chgemail.ear'
            Deploy status is 'Aborted'
            Description:'1. Failed to create deployable object 'XXXXXXX.com/home~chgemail' since it is not a Web Dynpro object.
             -> No Web Dynpro application (deployable object) with name XXXXXXX.com/home~chgemail exists.'.
            SDA : name 'home~chgemail', vendor 'XXXXXXX.com', location 'SN3_MDTRJS_D', version '20150312060513', software type ('J2EE', sub type ''), csn component '', dependencies :[( name 'tc~aii~base~offline~facade', vendor 'sap.com') , ( name 'tc~ddic~runtime~facade', vendor 'sap.com') , ( name 'tc~bl~logging~api', vendor 'sap.com') , ( name 'tc~bl~exception~lib', vendor 'sap.com') , ( name 'tc~wd~api', vendor 'sap.com') , ( name 'tc~cmi', vendor 'sap.com') , ( name 'tc~bl~jco~api', vendor 'sap.com') ]
            Time statistics( ms ):
                1.Check version:XXXXXXX.com_home~chgemail : 4
                2.validate : -1
                    2.1.Resolve dependencies : 3
                    2.2.deployment : 7055
                        2.2.1.Notify:Event triggered : 203
                        2.2.2.Bulk deployment : 6839
                            2.2.2.1.Stop : 73
                            2.2.2.2.Perform delivery : 6765
                                2.2.2.2.1.Application Deployer : 6615
                        2.2.3.Notify:Event performed : 9
                    2.3.Post process : 10
                        2.3.1.Starting : 9
    ]      [Error: com.sap.engine.services.tc~bl~deploy~api  Thread[Worker-444,5,main]]
    [#6]: Deployment Items status: [
    ----- Sorted Items -----
        1. Client path 'C:\nwds-extsoa-7.3-EHP1-SP14-PAT0000-win32\eclipse\workspace.jdi\1\DCs\XXXXXXX.com\home\chgemail\_comp\gen\default\deploy\XXXXXXX.com~home~chgemail.ear'
            Deploy status is 'Aborted'
            SDA : name 'home~chgemail', vendor 'XXXXXXX.com', location 'SN3_MDTRJS_D', version '20150312060513', software type ('J2EE', sub type ''), csn component '', dependencies :[( name 'tc~aii~base~offline~facade', vendor 'sap.com') , ( name 'tc~ddic~runtime~facade', vendor 'sap.com') , ( name 'tc~bl~logging~api', vendor 'sap.com') , ( name 'tc~bl~exception~lib', vendor 'sap.com') , ( name 'tc~wd~api', vendor 'sap.com') , ( name 'tc~cmi', vendor 'sap.com') , ( name 'tc~bl~jco~api', vendor 'sap.com') ]
    ----- Deployment Items -----
        1. Client path 'C:\nwds-extsoa-7.3-EHP1-SP14-PAT0000-win32\eclipse\workspace.jdi\1\DCs\XXXXXXX.com\home\chgemail\_comp\gen\default\deploy\XXXXXXX.com~home~chgemail.ear'
            Deploy status is 'Aborted'
            Description:'1. Failed to create deployable object 'XXXXXXX.com/home~chgemail' since it is not a Web Dynpro object.
             -> No Web Dynpro application (deployable object) with name XXXXXXX.com/home~chgemail exists.'.
            SDA : name 'home~chgemail', vendor 'XXXXXXX.com', location 'SN3_MDTRJS_D', version '20150312060513', software type ('J2EE', sub type ''), csn component '', dependencies :[( name 'tc~aii~base~offline~facade', vendor 'sap.com') , ( name 'tc~ddic~runtime~facade', vendor 'sap.com') , ( name 'tc~bl~logging~api', vendor 'sap.com') , ( name 'tc~bl~exception~lib', vendor 'sap.com') , ( name 'tc~wd~api', vendor 'sap.com') , ( name 'tc~cmi', vendor 'sap.com') , ( name 'tc~bl~jco~api', vendor 'sap.com') ]
            Time statistics( ms ):
                1.Check version:XXXXXXX.com_home~chgemail : 4
                2.validate : -1
                    2.1.Resolve dependencies : 3
                    2.2.deployment : 7055
                        2.2.1.Notify:Event triggered : 203
                        2.2.2.Bulk deployment : 6839
                            2.2.2.1.Stop : 73
                            2.2.2.2.Perform delivery : 6765
                                2.2.2.2.1.Application Deployer : 6615
                        2.2.3.Notify:Event performed : 9
                    2.3.Post process : 10
                        2.3.1.Starting : 9
    ]      [Error: com.sap.ide.eclipse.deployer.dc.DVLog  Thread[Worker-444,5,main]]
    [#6]: Deployment Items status: [
    ----- Sorted Items -----
        1. Client path 'C:\nwds-extsoa-7.3-EHP1-SP14-PAT0000-win32\eclipse\workspace.jdi\1\DCs\XXXXXXX.com\home\chgemail\_comp\gen\default\deploy\XXXXXXX.com~home~chgemail.ear'
            Deploy status is 'Aborted'
            SDA : name 'home~chgemail', vendor 'XXXXXXX.com', location 'SN3_MDTRJS_D', version '20150312060513', software type ('J2EE', sub type ''), csn component '', dependencies :[( name 'tc~aii~base~offline~facade', vendor 'sap.com') , ( name 'tc~ddic~runtime~facade', vendor 'sap.com') , ( name 'tc~bl~logging~api', vendor 'sap.com') , ( name 'tc~bl~exception~lib', vendor 'sap.com') , ( name 'tc~wd~api', vendor 'sap.com') , ( name 'tc~cmi', vendor 'sap.com') , ( name 'tc~bl~jco~api', vendor 'sap.com') ]
    ----- Deployment Items -----
        1. Client path 'C:\nwds-extsoa-7.3-EHP1-SP14-PAT0000-win32\eclipse\workspace.jdi\1\DCs\XXXXXXX.com\home\chgemail\_comp\gen\default\deploy\XXXXXXX.com~home~chgemail.ear'
            Deploy status is 'Aborted'
            Description:'1. Failed to create deployable object 'XXXXXXX.com/home~chgemail' since it is not a Web Dynpro object.
             -> No Web Dynpro application (deployable object) with name XXXXXXX.com/home~chgemail exists.'.
            SDA : name 'home~chgemail', vendor 'XXXXXXX.com', location 'SN3_MDTRJS_D', version '20150312060513', software type ('J2EE', sub type ''), csn component '', dependencies :[( name 'tc~aii~base~offline~facade', vendor 'sap.com') , ( name 'tc~ddic~runtime~facade', vendor 'sap.com') , ( name 'tc~bl~logging~api', vendor 'sap.com') , ( name 'tc~bl~exception~lib', vendor 'sap.com') , ( name 'tc~wd~api', vendor 'sap.com') , ( name 'tc~cmi', vendor 'sap.com') , ( name 'tc~bl~jco~api', vendor 'sap.com') ]
            Time statistics( ms ):
                1.Check version:XXXXXXX.com_home~chgemail : 4
                2.validate : -1
                    2.1.Resolve dependencies : 3
                    2.2.deployment : 7055
                        2.2.1.Notify:Event triggered : 203
                        2.2.2.Bulk deployment : 6839
                            2.2.2.1.Stop : 73
                            2.2.2.2.Perform delivery : 6765
                                2.2.2.2.1.Application Deployer : 6615
                        2.2.3.Notify:Event performed : 9
                    2.3.Post process : 10
                        2.3.1.Starting : 9
    ]      [Error: com.sap.ide.eclipse.deployer.dc.DVLog  Thread[Worker-444,5,main]]
    Deployment Exception during deployment phase [DeploymentException], cause=[ASJ.dpl_dc.001085 Operation [deploy] of [XXXXXXX.com_home~chgemail] failed]      [Error: com.sap.engine.services.tc~bl~deploy~api  Thread[Worker-444,5,main]]
    Deployment Exception during deployment phase [DeploymentException], cause=[ASJ.dpl_dc.001085 Operation [deploy] of [XXXXXXX.com_home~chgemail] failed]      [Error: com.sap.engine.services.tc~bl~deploy~api  Thread[Worker-444,5,main]]
    [#6]: Deployment Exception during deployment phase [DeploymentException], cause=[ASJ.dpl_dc.001085 Operation [deploy] of [XXXXXXX.com_home~chgemail] failed]      [Error: com.sap.ide.eclipse.deployer.dc.DVLog  Thread[Worker-444,5,main]]
    [#6]: Deployment Exception during deployment phase [DeploymentException], cause=[ASJ.dpl_dc.001085 Operation [deploy] of [XXXXXXX.com_home~chgemail] failed]      [Error: com.sap.ide.eclipse.deployer.dc.DVLog  Thread[Worker-444,5,main]]

    C:\nwds-extsoa-7.3-EHP1-SP14-PAT0000-win32\eclipse\workspace.jdi\1\DCs\XXXXXXX.com\home\chgemail\_comp\gen\default\deploy\XXXXXXX.com~home~chgemail.ear
    can you find this ear in your local drive?

  • Document Store Operation Failed due to missing authorisations.

    Hi
    I am using BW 3.5, One of the user is getting the following error message while accessing one of the report:
    Document Store Operation Failed due to missing authorisations.
    The user has previously accessed this report many times. But when I tied to access the report, there was no problem.
    Could any one of you advise me how to rectify this error?
    Many Thanks in advanc
    Regards
    Ishi

    Hi Suresh
    Thanks for the response; I have checked authorizations and user is authorised to access all the existing reports in BW. Checks were successful.
    What might be the reason then?
    Thanks

  • 'Document store operation failed due to missing authorization'

    Hi all,
      I am getting the error message 'Document store operation failed due to missing authorization' when trying to save the workbook as the existing Workbook after changing the structure for it. We are using the Authorization Hierarchies.
    What is the problem and how can I fix it, PLEASE ???
    Thanks.
    Message was edited by: Venkat Kodi

    check out the related thread:
    What is this error

  • WLS 10.3.3 - BEA-280061 The persistent store could not be deployed

    Hi,
    We have an application which is using WLS 10.3.3. After installing, whenever we start a managed server, it fails with:
    <BEA-280061> <The persistent store "XYZ" could not be deployed: java.io.IOException: [Store:280044]The file store directory "/<PATH TO STORE>/XYZ" does not exist
    java.io.IOException: [Store:280044]The file store directory "/<PATH TO STORE>/XYZ" does not exist
         at weblogic.store.io.file.StoreDir.throwIOException(StoreDir.java:173)
         at weblogic.store.io.file.StoreDir.createDirectory(StoreDir.java:226)
         at weblogic.store.admin.FileAdminHandler.prepareCommon(FileAdminHandler.java:158)
         at weblogic.store.admin.FileAdminHandler.prepare(FileAdminHandler.java:104)
         at weblogic.management.utils.GenericManagedService.prepareDeployment(GenericManagedService.java:204)
         at weblogic.management.utils.GenericServiceManager.prepareDeployment(GenericServiceManager.java:121)
         at weblogic.management.internal.DeploymentHandlerHome.invokeHandlers(DeploymentHandlerHome.java:628)
         at weblogic.management.internal.DeploymentHandlerHome.prepareInitialDeployments(DeploymentHandlerHome.java:408)
         at weblogic.management.deploy.internal.DeploymentAdapter$2.doPrepare(DeploymentAdapter.java:98)
         at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
         at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
         at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    >
    On investigation, the data/store directory does exist and the path is correct, but the store name directory does not - so for example if the store is called XYZ, there is no folder XYZ in data/store.
    There are no errors in the managed server log at all up until this point.
    We can get this working by:
    * Starting the Managed server
    * It fails
    * ShutDown the Managed Server
    * Create the folder XYZ using mkdir
    * Start the Managed Server (this works)
    This is the associated section from the config.xml:
    <file-store>
    <name>XYZ</name>
    <target>manserv-1</target>
    </file-store>
    This is a four node cluster and this store is deployed to all of the nodes - all four nodes have the same issue.
    Obviously I'd like to know why this is happening so we can correct it. I have looked round the web but can't see this particular error anywhere.
    Thanks in advance for any help
    Edited by: 843385 on Mar 10, 2011 6:03 AM

    Make sure the directory to which the file store points in available.
    - Target attribute of the file store (The server instances or migratable targets defined in the current domain that are candidates for hosting the
    file store. In a clustered environment, a recommended best practice is to target a custom file store to the same migratable target as the migratable
    JMS service, so that a member server will not be a single point of failure. A file store can also be configured to automatically migrate from an
    unhealthy server instance to a healthy server instance with the help of the server health monitoring services.)
    - Directory attribute of the file store (The path name to the file system directory where the file store maintains its data files. When targeting a
    file store to a migratable target, the store directory must be accessible from all candidate server members in the migratable target. For highest
    availability, you can use a SAN (Storage Area Network) disk.)
    Note that a filestore is a singleton service and is targetted to one server in the cluster at a time, in your case manserv-1.
    So on the machine where manserv-1 runs you must make sure the directory "/<PATH TO STORE>/XYZ exists.

  • Lync 2010 to 2013 Migration DB issue, central management database.

    Hello ,
    During Lync 2010 to 2013 migration , on my back end database for Lync 2013 I previously created there data base instances on my lync 2013 BE , (RTC,MON, ARC) THERE DIFFERENT ISTNACE using sql server enterprise 2012 .
    Now I want to finish the migration by moving the central management server to the lync server 2013.
    my question now I tried to create a new DB instance and I face some issue related  the space on the server .
    can I use any of the existing isnatce which I created before for the (RTC,MON, ARC) or can I sue the default instance which is created by default with sql 2012 server installation .to install the central management database.
    do I need a spate instance ? for the new central management store on my lync server 2013
    Thanks
    MK

    Hello
    After I run the command
     Install-CsDatabase -CentralManagementDatabase -SqlServerFqdn hq-lync2013-be.MYDOMAIN -SqlInstanceName RTC.
    -Then
    Enable-CsTopology
    -Then
    Move-CsManagementServer .
    And now after the move when I check the logs :
    WARNING: The move completed successfully but the following additional steps are required:
      Run local setup on the following computers to remove Central Management services that are no longer defined in the topology:
        - HQ-LYNC-FE-01.MYDOMAIN
    WARNING: "Move-CsManagementServer" processing has completed with warnings. "2" warnings were recorded during this run.
    WARNING: Detailed results can be found at
    "C:\Users\MYUSER\AppData\Local\Temp\2\Move-CsManagementServer-0d4806f4-554d-497d-a0dc-0fc98a6e076d.html".
    THESE AR ETEH TWO WARININGS :
    Warning: Failed to cleanup file store for the new Central Management Server. Error The directory is not empty.
    Warning: The move completed successfully but the following additional steps are required:
    Run local setup on the following computers to remove Central Management services that are no longer defined in the topology:
    - HQ-LYNC-FE-01.MYDOMAIN.
    I Run the local setup on both the FE2013 AND FE2010.
    now when I run the command :
    Get-CsManagementStoreReplicationStatus
    UpToDate           : False    (I shutdown this server )
    ReplicaFqdn        : HQ-EDGE01.mydomain
    LastStatusReport   :
    LastUpdateCreation : 3/16/2015 1:52:45 PM
    ProductVersion     :
    UpToDate           : False
    ReplicaFqdn        : HQ-LYNC2013-FE.mydomain
    LastStatusReport   :
    LastUpdateCreation : 3/16/2015 1:52:45 PM
    ProductVersion     :
    UpToDate           : False
    ReplicaFqdn        : HQ-LYNC-FE-01.mydomain
    LastStatusReport   :
    LastUpdateCreation : 3/16/2015 1:52:45 PM
    ProductVersion     :
    UpToDate           : False
    ReplicaFqdn        : HQ-LYNC-MA-01.mydomain
    LastStatusReport   :
    LastUpdateCreation : 3/16/2015 1:52:45 PM
    ProductVersion     :
    NOW THEER IS REPLICATION ISSUE ?
    I notice that service on my lync 2010 SOME OF THEM ARE STOPPED :
    FILE TRANSFER AGENT , MASTER REPLICATORE AGENT , CALL PARK SERVICE (ALL ON LYNC 2010)
    ALL SERVICE ON 2013 FE IS OK AND RUNNING..
    I notice this error in my lync server 2013 vents .
    I host the shared file on my lync server 2010 mediation server
    Microsoft Lync Server 2013, Master Replicator Agent service encountered an error while accessing a file share and will continuously attempt to access this file share until this issue is resolved. While this condition persists, replication to replica machines
    might not occur.
    IO failure occurred for Path=\\HQ-LYNC-MA-01.mydomain\LYNCSHARE\1-CentralMgmt-1\CMSFileStore\xds-master\working\replication\tmp. Exception=Access to the path '\\HQ-LYNC-MA-01.mydomain\LYNCSHARE\1-CentralMgmt-1' is denied..
    Cause: Possible issues with file share permissions. This can occur if the computer hosting the file share has outdated cached credentials for the computer that is trying to access the file share.
    Resolution:
    For details about how to resolve file share permission issues, see the product documentation.
    SO ANY ADVICE ?
    Regards
    MK

  • Persistent Store Problems for MYSQL Enhanced Cluster With OpenMQ 4.4

    I am trying to implement an enhanced cluster with failover. I have edited the config files for each broker instance for a persistent store. I have appended the following to each of the config.properties files:
    imq.brokerid=myclusterinstanceINSTANCE1 # I substitute INSTANCE2 for INSTANCE1 for broker #2
    imq.persist.store=jdbc
    imq.persist.jdbc.dbVendor=mysql
    imq.persist.jdbc.mysql.property.url=jdbc:mysql://xxx.xxx.xxx.xx:3306/test
    imq.persist.jdbc.mysql.user=user1
    imq.persist.jdbc.mysql.needpassword=true
    imq.persist.jdbc.mysql.password=mypass
    imq.cluster.ha=true
    imq.cluster.clusterid=mycluster
    imq.cluster.brokerlist=xxx.xxx.xxx.x:37676,yyy.yyy.yyy.y:37676
    I then create the persistence storage with "imqdbmgr create tbl". When I view the data in the tables it creates, I have one row. Under Store_Version, I have 410. Under LOCK_ID, it has NULL. When I go to start the brokers with imqbrokerd, I get the following error:
    ERROR [B3198]: Error initializing cluster manager:
    com.sun.messaging.jmq.jmsserver.util.BrokerException: [B4239]: Failed to load persistent store version from database table MQVER41Cmycluster
    at com.sun.messaging.jmq.jmsserver.persist.jdbc.VersionDAOImpl.getStoreVersion(VersionDAOImpl.java:310)
    at com.sun.messaging.jmq.jmsserver.persist.jdbc.DBTool.updateStoreVersion410IfNecessary(DBTool.java:350)
    at com.sun.messaging.jmq.jmsserver.persist.jdbc.JDBCStore.checkStore(JDBCStore.java:3599)
    at com.sun.messaging.jmq.jmsserver.persist.jdbc.JDBCStore.<init>(JDBCStore.java:127)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
    at java.lang.Class.newInstance0(Class.java:355)
    at java.lang.Class.newInstance(Class.java:308)
    at com.sun.messaging.jmq.jmsserver.persist.StoreManager.getStore(StoreManager.java:157)
    at com.sun.messaging.jmq.jmsserver.Globals.getStore(Globals.java:967)
    at com.sun.messaging.jmq.jmsserver.cluster.ha.HAClusterManagerImpl.initialize(HAClusterManagerImpl.java:181)
    at com.sun.messaging.jmq.jmsserver.Globals.initClusterManager(Globals.java:903)
    at com.sun.messaging.jmq.jmsserver.Broker._start(Broker.java:777)
    at com.sun.messaging.jmq.jmsserver.Broker.start(Broker.java:410)
    at com.sun.messaging.jmq.jmsserver.Broker.main(Broker.java:1971)
    Caused by: java.lang.NullPointerException
    at com.mysql.jdbc.ResultSetImpl.findColumn(ResultSetImpl.java:1103)
    at com.mysql.jdbc.ResultSetImpl.getInt(ResultSetImpl.java:2777)
    at com.sun.messaging.jmq.jmsserver.persist.jdbc.VersionDAOImpl.getStoreVersion(VersionDAOImpl.java:298)
    ... 16 more
    I believe this error is attributed to the NULL value under LOCK_ID. I think that the value under LOCK_ID should be the name of the broker from the config file (even though I specified them in the config files). Any ideas?? THANKS!

    Just some pointers -- maybe this will be of use:
    If you haven't already read it, please take a look at the [ MySQL setup guide|https://mq.dev.java.net/OpenMQ_MySQLCluster_Setup_Guide.html] .
    We recommend using NDB Data-store of MySQL Cluster, though this isn't an absolute requirement. Due to some issues we have found with earlier versions, we recommend using MySQL Cluster, 7.0.9 or better (the current version is 7.0.16, or 7.1.5). Either of these would contain Connector/J.
    I'd also recommend using the latest version -- MQ 4.4update2 (just in case you happen to have an older copy). There were many minor improvements in the integration with MySQL from the original 4.4 release, to update 2. This is linked at the MQ download page: [https://mq.dev.java.net/downloads.html]

  • The persistent store record 6,810 could not be found

    Under heavy load, we get an exception stack trace in the log, that says that an expired message could not be deleted. This message is repeated every 15-30 minutes for other records. 5 hours later, it says that a thread is stuck and the server is blocked.
              What to do?
              We use Weblogic 9.2 MP2
              Thanks, Peter
              <Dec 17, 2007 7:19:48 PM MET> <Warning> <Messaging> <BEA-282006> <An error occurred while deleting an expired message for the messaging kernel datadispatcher-2/WeblogicJmsDistributedTopic@Remote@DataDispatc
              her JMS Module!datadispatcher-3@HandlerTopic@Local@DataDispatcher JMS Module!datadispatcher-2@HandlerTopic: weblogic.store.PersistentStoreException: [Store:280029]The persistent store record 6,810 could not
              be found
              weblogic.store.PersistentStoreException: [Store:280029]The persistent store record 6,810 could not be found
              at weblogic.store.internal.DeleteRequest.coalesce(DeleteRequest.java:55)
              at weblogic.store.internal.PersistentStoreImpl.coalesceRequests(PersistentStoreImpl.java:510)
              at weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:613)
              at weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:621)
              at java.lang.Thread.run(Thread.java:595)
              >
              <Dec 17, 2007 7:19:48 PM MET> <Warning> <Messaging> <BEA-282006> <An error occurred while deleting an expired message for the messaging kernel datadispatcher-2/WeblogicJmsDistributedTopic@Remote@DataDispatc
              her JMS Module!datadispatcher-4@HandlerTopic@Local@DataDispatcher JMS Module!datadispatcher-2@HandlerTopic: weblogic.store.PersistentStoreException: [Store:280029]The persistent store record 6,810 could not
              be found
              weblogic.store.PersistentStoreException: [Store:280029]The persistent store record 6,810 could not be found
              at weblogic.store.internal.DeleteRequest.coalesce(DeleteRequest.java:55)
              at weblogic.store.internal.PersistentStoreImpl.coalesceRequests(PersistentStoreImpl.java:510)
              at weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:613)
              at weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:621)
              at java.lang.Thread.run(Thread.java:595)
              >
              <Dec 17, 2007 7:19:48 PM MET> <Error> <Store> <BEA-280074> <The persistent store "datadispatcher-fs-2" encountered an unresolvable failure while processing transaction "BEA1-0A0CD965B4DAECF2346C". Shutdown
              and restart to resolve this transaction. weblogic.store.gxa.GXAException: weblogic.store.PersistentStoreException: weblogic.store.PersistentStoreException: [Store:280029]The persistent store record 6,810 co
              uld not be found
              weblogic.store.gxa.GXAException: weblogic.store.PersistentStoreException: weblogic.store.PersistentStoreException: [Store:280029]The persistent store record 6,810 could not be found
              at weblogic.store.gxa.internal.GXAResourceImpl.registerFailedTransaction(GXAResourceImpl.java:597)
              at weblogic.store.gxa.internal.GXATransactionImpl.doOperationCallbacks(GXATransactionImpl.java:243)
              at weblogic.store.gxa.internal.GXAResourceImpl.commit(GXAResourceImpl.java:1451)
              at weblogic.transaction.internal.XAServerResourceInfo.commit(XAServerResourceInfo.java:1333)
              at weblogic.transaction.internal.XAServerResourceInfo.commit(XAServerResourceInfo.java:577)
              at weblogic.transaction.internal.ServerSCInfo.startCommit(ServerSCInfo.java:486)
              at weblogic.transaction.internal.ServerTransactionImpl.localCommit(ServerTransactionImpl.java:1993)
              at weblogic.transaction.internal.ServerTransactionImpl.globalRetryCommit(ServerTransactionImpl.java:2658)
              at weblogic.transaction.internal.ServerTransactionImpl.globalCommit(ServerTransactionImpl.java:2580)
              at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:278)
              at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:227)
              at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:463)
              at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:335)
              at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:291)
              at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4072)
              at weblogic.jms.client.JMSSession.execute(JMSSession.java:3962)
              at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:4490)
              at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
              at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
              at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
              weblogic.store.PersistentStoreException: weblogic.store.PersistentStoreException: [Store:280029]The persistent store record 6,810 could not be found
              at weblogic.store.gxa.internal.GXATransactionImpl.commitStoreIO(GXATransactionImpl.java:103)
              at weblogic.store.gxa.internal.GXATransactionImpl.doOperationCallbacks(GXATransactionImpl.java:215)
              at weblogic.store.gxa.internal.GXAResourceImpl.commit(GXAResourceImpl.java:1451)
              at weblogic.transaction.internal.XAServerResourceInfo.commit(XAServerResourceInfo.java:1333)
              at weblogic.transaction.internal.XAServerResourceInfo.commit(XAServerResourceInfo.java:577)
              at weblogic.transaction.internal.ServerSCInfo.startCommit(ServerSCInfo.java:486)
              at weblogic.transaction.internal.ServerTransactionImpl.localCommit(ServerTransactionImpl.java:1993)
              at weblogic.transaction.internal.ServerTransactionImpl.globalRetryCommit(ServerTransactionImpl.java:2658)
              at weblogic.transaction.internal.ServerTransactionImpl.globalCommit(ServerTransactionImpl.java:2580)
              at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:278)
              at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:227)
              at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:463)
              at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:335)
              at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:291)
              at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4072)
              at weblogic.jms.client.JMSSession.execute(JMSSession.java:3962)
              at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:4490)
              at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
              at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
              at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
              weblogic.store.PersistentStoreException: [Store:280029]The persistent store record 6,810 could not be found
              at weblogic.store.internal.DeleteRequest.coalesce(DeleteRequest.java:55)
              at weblogic.store.internal.PersistentStoreImpl.coalesceRequests(PersistentStoreImpl.java:510)
              at weblogic.store.internal.PersistentStoreImpl.getOutstandingWork(PersistentStoreImpl.java:613)
              at weblogic.store.internal.PersistentStoreImpl.run(PersistentStoreImpl.java:621)
              at java.lang.Thread.run(Thread.java:595)
              >
              <Dec 17, 2007 7:19:48 PM MET> <Error> <EJB> <BEA-010026> <Exception occurred during commit of transaction Xid=BEA1-0A0DD965B4DAECF2346C(14187897),Status=Rolled back. [Reason=javax.transaction.xa.XAException
              ],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=0,seconds left=60,XAServerResourceInfo[WLStore_deplDomain_datadispatcher-fs-2]=(ServerResourceInfo[WLStore_deplDomain_datadispatcher-fs-2]=(st
              ate=rolledback,assigned=deplMan2),xar=WLStore_deplDomain_datadispatcher-fs-25927290,re-Registered = false),XAServerResourceInfo[datadispatcher-multipool]=(ServerResourceInfo[datadispatcher-multipool]=(state
              =rolledback,assigned=deplMan2),xar=datadispatcher-multipool,re-Registered = false),SCInfo[deplDomain+deplMan2]=(state=rolledback),local properties=({weblogic.jdbc.jta.datadispatcher-multipool=[ No XAConnect
              ion is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=deplMan2+141.249.2.220:28200+deplDomain+t3+, XAResources={NetworkControl, WeblogicTimerService
              , datadispatcher-xa-standby, datadispatcher-multipool, WLStore_deplDomain_datadispatcher-fs-2, datadispatcher-xa-active},NonXAResources={})],CoordinatorURL=deplMan2+141.249.2.220:28200+deplDomain+t3+): webl
              ogic.transaction.RollbackException: Could not prepare resource 'WLStore_deplDomain_datadispatcher-fs-2
              at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1809)
              at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:331)
              at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:227)
              at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:463)
              at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:335)
              at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:291)
              at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4072)
              at weblogic.jms.client.JMSSession.execute(JMSSession.java:3962)
              at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:4490)
              at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
              at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
              at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
              <Dec 18, 2007 12:33:44 AM MET> <Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "643" seconds working on the request "we
              blogic.work.ServerWorkManagerImpl$WorkAdapterImpl@7aca93", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
              sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
              java.lang.reflect.Method.invoke(Method.java:585)
              net.sf.hibernate.property.BasicPropertyAccessor$BasicGetter.get(BasicPropertyAccessor.java:96)
              net.sf.hibernate.persister.AbstractEntityPersister.getIdentifier(AbstractEntityPersister.java:306)
              net.sf.hibernate.impl.SessionImpl.checkId(SessionImpl.java:2636)
              net.sf.hibernate.impl.SessionImpl.flushEntity(SessionImpl.java:2461)
              net.sf.hibernate.impl.SessionImpl.flushEntities(SessionImpl.java:2454)
              net.sf.hibernate.impl.SessionImpl.flushEverything(SessionImpl.java:2256)
              net.sf.hibernate.impl.SessionImpl.autoFlushIfRequired(SessionImpl.java:1801)
              net.sf.hibernate.impl.SessionImpl.getQueries(SessionImpl.java:1567)
              net.sf.hibernate.impl.SessionImpl.find(SessionImpl.java:1532)
              net.sf.hibernate.impl.QueryImpl.list(QueryImpl.java:39)
              ch.meteoswiss.datadispatcher.model.dao.TimedMessageDAO.findByMeteodata(TimedMessageDAO.java:232)
              ch.meteoswiss.datadispatcher.model.dao.TimedMessageDAO.deleteByMeteodata(TimedMessageDAO.java:263)
              ch.meteoswiss.datadispatcher.model.dao.MeteodataDAO.delete(MeteodataDAO.java:482)
              ch.meteoswiss.datadispatcher.model.base.BaseMeteodataDAO.delete(BaseMeteodataDAO.java:194)
              ch.meteoswiss.datadispatcher.model.dao.MeteodataDAO.deleteOutdated(MeteodataDAO.java:432)
              ch.meteoswiss.datadispatcher.timed.CleanUpListener.deleteOutdatedMeteodataEntries(CleanUpListener.java:88)
              ch.meteoswiss.datadispatcher.timed.CleanUpListener.handleNotification(CleanUpListener.java:141)
              weblogic.management.timer.TimerListener$1.run(TimerListener.java:48)
              weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
              weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
              weblogic.management.timer.TimerListener.deliverNotification(TimerListener.java:44)
              weblogic.management.timer.Timer.deliverNotifications(Timer.java:440)
              weblogic.management.timer.TimerNotification$1.run(TimerNotification.java:124)
              weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
              weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
              weblogic.management.timer.TimerNotification.timerExpired(TimerNotification.java:121)
              weblogic.timers.internal.TimerImpl.run(TimerImpl.java:265)
              weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
              weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
              weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
              >

    Please find below an extract of the Java trace (kill -3 on Unix):
              "[STUCK] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'" daemon prio=1 tid=0x00440ef8 nid=0x34 in Object.wait() [0x85800000..0x85801808]
              at java.lang.Object.wait(Native Method)
              at java.lang.Object.wait(Object.java:474)
              at weblogic.messaging.dispatcher.Request.sleepTillNotified(Request.java:324)
              at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:801)
              - locked <0xb3288670> (a weblogic.jms.backend.BEProducerSendRequest)
              at weblogic.messaging.dispatcher.DispatcherImpl.dispatchAsyncInternal(DispatcherImpl.java:129)
              at weblogic.messaging.dispatcher.DispatcherImpl.dispatchAsync(DispatcherImpl.java:112)
              at weblogic.messaging.dispatcher.Request.dispatchAsync(Request.java:1046)
              at weblogic.jms.dispatcher.Request.dispatchAsync(Request.java:72)
              at weblogic.jms.frontend.FEProducer.doDispatch(FEProducer.java:880)
              at weblogic.jms.frontend.FEProducer.sendRetryDestination(FEProducer.java:1010)
              at weblogic.jms.frontend.FEProducer.send(FEProducer.java:1383)
              at weblogic.jms.frontend.FEProducer.invoke(FEProducer.java:1444)
              at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:759)
              at weblogic.messaging.dispatcher.DispatcherImpl.dispatchSyncNoTran(DispatcherImpl.java:246)
              at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSyncNoTran(DispatcherAdapter.java:59)
              at weblogic.jms.client.JMSProducer.toFEProducer(JMSProducer.java:1061)
              at weblogic.jms.client.JMSProducer.deliveryInternal(JMSProducer.java:670)
              at weblogic.jms.client.JMSProducer.sendInternal(JMSProducer.java:455)
              at weblogic.jms.client.JMSProducer.send(JMSProducer.java:337)
              at weblogic.jms.client.WLProducerImpl.send(WLProducerImpl.java:966)
              at ch.meteoswiss.datadispatcher.receiver.ReceiverServlet.sendJMSMessage(ReceiverServlet.java:255)
              at ch.meteoswiss.datadispatcher.receiver.ReceiverServlet.doProcess(ReceiverServlet.java:320)
              at ch.meteoswiss.datadispatcher.receiver.ReceiverServlet.doPost(ReceiverServlet.java:297)
              at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
              at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
              at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
              at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
              at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
              at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
              at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3231)
              at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
              at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
              at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2002)
              at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1908)
              at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1362)
              at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
              at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
              The method in ReceiverServlet:
                        private static void sendJMSMessage(MeteodataTransfer data) throws NamingException, JMSException {
                      QueueConnection queueConnection = null;
                      QueueSession jmsSession = null;
                      QueueSender jmsSender = null;
                      try {
                          final ServiceLocator initial = ServiceLocator.getInstance();
                          final QueueConnectionFactory factory = (QueueConnectionFactory)initial.lookup(ServiceLocator.CONNECTION_FACTORY); //"java:comp/env/jms/QUEUEFACTORY");
                          final Queue queue = (Queue)initial.lookup("java:comp/env/jms/"+data.getSubscriber().getOutputQueueTx().toUpperCase());
                          queueConnection = factory.createQueueConnection();
                          jmsSession = queueConnection.createQueueSession(false,Session.AUTO_ACKNOWLEDGE);
                          jmsSender = jmsSession.createSender(queue);
                          final ObjectMessage msg = jmsSession.createObjectMessage();
                          msg.setJMSExpiration(...);
                          msg.setObject(data);
                          jmsSender.send(msg); // LINE 255!!! STUCK!!!
                      } finally {
                          JmsUtil.closeQuietly(jmsSender);
                          JmsUtil.closeQuietly(jmsSession);
                          JmsUtil.closeQuietly(queueConnection);
              

  • Live Migration failed using virtual HBA's and Guest Clustering

    Hi,
    We have a Guest Cluster Configuration on top of an Hyper-V Cluster. We are using Windows 2012 and Fiber Channel shared storage.
    The problem is regarding Live Migration. Some times when we move a virtual machine from node A to node B everything goes well but when we try to move back to node A Live Migration fails. What we can see is that when we move the VM from node A to B and Live
    Migration completes successfully the virtual ports remain active on node A, so when we try to move back from B to A Live Migration fails because the virtual ports are already there.
    This doesn't happen every time.
    We have checked the zoning between Host Cluster Hyper-V and the SAN, the mapping between physical HBA's and the vSAN's on the Hyper-V and everything is ok.
    Our doubt is, what is the best practice for zoning the vHBA on the VM's and our Fabric? We setup our zoning using an alias for the vHBA 1 and the two WWN (A and B) on the same object and an alias for the vHBA 2 and the correspondent WWN (A and B). Is it
    better to create an alias for vHBA 1 -> A (with WWN A) and other alias for vHBA 1 -> B (with WWN B)? 
    The guest cluster VM's have 98GB of RAM each. Could it be a time out issue when Live Migration happen's and the virtual ports remain active on the source node? When everything goes well, the VM moves from node A with vHBA WWN A to node B and stays there
    with vHBA WWN B. On the source node the virtual ports should be removed automatically when the Live Migration completes. And that is the issue... sometimes the virtual ports (WWN A) stay active on the source node and when we try to move back the VM Live Migration
    fails.
    I hope You may understand the issue.
    Regards,
    Carlos Monteiro.

    Hi ,
    Hope the following link may help.
    To support live migration of virtual machines across Hyper-V hosts while maintaining Fibre Channel connectivity, two WWNs are configured for each virtual Fibre Channel adapter: Set A and Set B. Hyper-V automatically alternates between the Set A and Set B
    WWN addresses during a live migration. This ensures that all LUNs are available on the destination host before the migration and that no downtime occurs during the migration.
    Hyper-V Virtual Fibre Channel Overview
    http://technet.microsoft.com/en-us/library/hh831413.aspx
    More information:
    Hyper-V Virtual Fibre Channel Troubleshooting Guide
    http://social.technet.microsoft.com/wiki/contents/articles/18698.hyper-v-virtual-fibre-channel-troubleshooting-guide.aspx
    Hyper-V Virtual Fibre Channel Design Guide
    http://blogs.technet.com/b/privatecloud/archive/2013/07/23/hyper-v-virtual-fibre-channel-design-guide.aspx
    Hyper-V virtual SAN
    http://salworx.blogspot.co.uk/
    Thanks.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Failed to read data from report file, failed to read parameter object

    Error message when doing a u201CSchedule List of Valuesu201D
    failed to read data from report file,
    c:\docume~1\user........
    failed to read parameter object
    Earlier in the day it worked just fine nothing had been changed.
    I have admin right on the windows server and in central management console
    Can someone please help with this issue.

    Hi Glenn
    Please let us know the following:
    1.What is the exact version of Crystal Reports Designer?
    2.What is the version of Business objects Enterprise installed on the machine?
    3.Are reports based on Business views,Deski,Webi?
    4.Are the reports migrated from older version of Crystal Reports to new Version?
    Thanks
    Shraddha

Maybe you are looking for

  • User Status

    Dear all how to genarate user wise status report for example  how many po/Sale order / production order/material document made in particular year /date ? Regards Suresh

  • Inventory - Quantity Discrepancy

    Why do I show the correct quantity at the item master level but incorrect qty/value at the inventory valuation/audit report level? We have just taken physical inventory - we entered our results into inventory tracking then posted using inventory post

  • Bqlog File Oracle EPM 11.1.1.3

    Dear Experts, How to suppress Bqlog file which is generated with the other job outputs of any bqy job. In the old version I used to add BP_FLAGS variables in the startCommonservice.bat or startJobservcie.bat file . But in EPM 11.1.1.3 these batch fil

  • Saving image as file or in database

    What is the best practice for saving user uploaded picture? Should that image be saved in database or in some directory.

  • Can't sync with Blackberry software

    Hey Guys:  I have an 8830 and when I open the desktop software on my mac the message to "connect with the USB cable"  I can't move past this screen.  Any suggestions?  I have used pocket mac successfully for quite a while and this is a disappointment