Persisting Cut-off or unplayed notes problem in Logic Pro X

Hi Guys,
I've been having this persisting problem in LogicPro X. Let me just explain it here, I have a MIDI file which i got from the net, i played it in my piano role software and it was fine, but one i just imported the midi into Logic and just exported it straight away( just for experiment purposes), the notes became cut-off( example of cut-off? Ill send you the MIDI which i got on export from LOGIC aswell) when i played them in the piano roll software, and if i import and export the same MIDI in another software its fine, its just trhat ive grown accustomed to Logic Pro and i really enjoy it! I find FL studio and all those things annoying, so thats why i wondered if you guys could help me get a fix. And if something is wrong with my Logic just incase - if you guys give me your email address i will send the midi to you and can you just export it from your software and send it back to me? If the MIDI plays fine could you tell me your Logic Pro settings and such and such thanks! -And FYI if i re-open the exported MIDI in Logic its plays back fine! Im getting really annoyed and confused
PS: My piano roll software is Synthesia

You might want set up a key command for "paste at original position". My key command is command/option/shift/p. This seems to work flawlessly. Unfortunately I have run across the bug you're refering to.
Jim

Similar Messages

I've bought and downloaded music from itunes, but the ends of almost all my songs are cut off and will not play, how can I fix this?

I've bought and downloaded music from itunes, but the ends of almost all my songs are cut off and will not play, how can I fix this? Most of the music cuts off abouthalf way through the song, then it skips to the next one. Itunes also says I have not purchased the album though it is listed under my purchased albums. It's incrediabley frustrating, please help.

go to the itunes store. select more in the bottom right select purchased. then press the cloud icon to DL striaght to the phone. Id use wifi. you can also DL into computer then synv over to phone.

My K2000R will not respond to Logic Pro 9

My K2000R will not respond to Logic Pro 9

So the MIDI Sport has an A or B port selection?
MIDI Out of the interface to MIDI In on the K2000r
In the inspector on the left, (on a test track) set MIDI channel to ALL and try both the A & B ports.
Is the MIDI Interface plugged into a hub? If so try it on a port.
Did you upgrade anything recently, there was a version of OSX that stopped a bunch of USB stuff from working.
Is 10.7.5 correct?

IPod cutting off songs/iTunes not recognizing iPod correctly

Hi,
I have a second generation nano using a PC with Vista operating system, and using the latest iTunes software (7.6.1.9). I have been noticing that more and more of my songs on the iPod have been cutting off, either a few seconds into the song, near the end, etc, but are just fine when played through iTunes from my hard drive. At first it was just a couple of songs, but then more and more started to cut off. Then, the iTunes started telling me that it wasn't able to read my iPod correctly and that I should restore it to original settings. I did that a few times and kept reloading the songs, but the problem still occurs seems to be getting worse. Tonight when I plugged the iPod in, iTunes said that it "detected an iPod but couldn't identify it. Unplug it and plug back in." I did, and it read it, but that particular problem also seems to be getting worse and I'm afraid soon it won't be able to detect the iPod at all (and this latest message was after I updated with the iTunes latest version). It seems like the actual iPod software is corrupted, and that its software needs to be re-installed, not the iTunes. Am I wrong in that assessment? How would I go about doing that? I can't seem to find any clear instructions and I don't see many people reporting this problem.
Thanks,
Robyn

I have also had the same problem...
The songs appear to be random, and when I plug my iPod into the computer it is fixed. Sure enough, a monthish later, it happens again.
When my songs get cut off, they are stopped exactly half-way through. Apparently, the iPod thinks that is how long they are, because it plays the time that it shows (the total time only goes to helf of what it normally is).
This does not seem to be a matter of old software, as I am always up-to-date on iPod software, and this has been happening to me with version 1.4.1
I have not Restored my iPod, but apparently that will not help (according to the other posts).
I hope somebody can answer this (although I've posted it twice before with no luck, so...)

In combobox 'g' is getting cut off, 'g' is not fully visible

Hi Flex people,
I am facing problem in combobox, I have the items : 'moon' , 'manager' , 'marketing' in the combobox.
The text 'moon' is fully visible, but the in text 'manager' , 'g' is cut off, means character 'g' is not fully visible.
Please give solution to how to make the 'g' to visible in the selected item of combobox.
Please find the attached snapshot, that will give clear idea.
Thanks,
Sushant

Try this component:
<?xml version="1.0" encoding="utf-8"?>
<mx:ComboBox xmlns:mx="http://www.adobe.com/2006/mxml" creationComplete="init();" updateComplete="adjustComboDropDownWidth();"
    buttonMode="true">
    <mx:Script>
    <![CDATA[
        import mx.controls.List;
         private var _selectedValue:String;
         private var _selectedLable:String;
         private var bSelectedValueSet:Boolean = false;
         private var bDataProviderSet:Boolean = false;
         [Bindable]
            private var myDropdownFactory:ClassFactory;
         // Override committ, this may be called repeatedly
         override protected function commitProperties():void
            // invoke ComboBox version
            super.commitProperties();
            // If value set and have dataProvider
            if (bSelectedValueSet && bDataProviderSet)
               // Set flag to false so code won't be called until selectedValue is set again
               bSelectedValueSet=false;
               // Loop through dataProvider
               for (var i:int=0;i<this.dataProvider.length;i++)
                  // Get this item's data
                  var item:String = this.dataProvider[i].data;
                  // Check if is selectedValue
                  if(item == _selectedValue)
                     // Yes, set selectedIndex
                     this.selectedIndex = i;
                     break;
         // Trap dataProvider being set
         override public function set dataProvider(o:Object):void
            // invoke ComboBox version
            super.dataProvider = o;
            // This may get called before dataProvider is set, so make sure not null and has entries
            if (o!=null && o.length)
               // Got it, set flag
               bDataProviderSet = true;
         // set for selectedValue
         public function set selectedValue(s:String):void
            // Set flag
            bSelectedValueSet = true;
            // Save value
            _selectedValue = s;
            // Invalidate to force commit
            invalidateProperties();
          * @author       : Prashant Shelke.
          * @date         : 17/10/07
          * @method name : init()
          * @i/p params : -
          * @return            : void
          * @description : To show tool-tip on line items objects of combobox.
          public function init():void
                myDropdownFactory         = new ClassFactory(List);
                myDropdownFactory.properties = {showDataTips:true, dataTipFunction:myDataTipFunction}
                this.dropdownFactory    = myDropdownFactory;
             private function myDataTipFunction(value:Object):String
                return (value.label);
           * @author       : Prashant Shelke.
          * @date         : 17/10/07
          * @method name : adjustComboDropDownWidth()
          * @i/p params : ComboBox
          * @return         : Number
          * @description : computes dropdown width according to what dataprovider provided to it.
          private function adjustComboDropDownWidth():void
                  this.dropdownWidth    = calculateCustomPreferredSizeFromData();
          * @author       : Prashant Shelke.
          * @date         : 16/10/07
          * @method name : calculateCustomPreferredSizeFromData()
          * @i/p params : -
          * @return            : Number
          * @description : computes dropdown width according to what dataprovider provided to it.
          public function calculateCustomPreferredSizeFromData():Number
                var dropDownWidth:Number    = this.calculatePreferredSizeFromData(this.dataProvider.length).width+14;
                if(dropDownWidth > this.width)
                    return dropDownWidth;
                else
                    return this.width;
      ]]>
   </mx:Script>
</mx:ComboBox>

Songs purchased from iTunes cut off and do not show as purchased

I've had iTunes roughly since 2006. All my purchases don't show up in the purchased playlist. Quite a few of the songs (like the entire Sleep Through the Static album) cut off about 2 1/2 minutes into the song. I saw some people had deleted their "corrupt" files and then redownload them from the store but since many of the songs don't even show up as purchased anymore in mine (maybe do to the newer computer) this is not an option
Is there a way to fix this or am I out of luck?

Hello Radgeta,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Updating the Purchased playlist
http://support.apple.com/kb/TA25119
If you do not find your purchases there, don't worry—you can easily associate them with your Purchased playlist.
Best of luck,
Mario

Evolution MK449C Mod Wheel problem with Logic Pro/VSL Performance Tool

I'm using the latest version of Logic Pro on a new Intel Mac Pro. My controller keyboard is the Evolution MK449C, connected via a USB cable.
When using a Logic Audio Instrument assigned to the ESX Sampler Plug-in (running various samples, mostly from the Vienna Symphonic Library,) Logic's Transport Window doesn't register any modulation information generated from my keyboard.
As the VSL Performance Tool relies heavily on the Mod Wheel info to effect the sounds, I'm at a bit of a loss to spot the solution. When I assign a different conroller to the Mod Wheel, i.e. volume, pan, pitch bend, etc., I can see the info in the Transport Window with no problem, so I know the wheel itself is working okay.
Has either Logic or the ESX got some kind of controller filter, - maybe I've accidently turned something on that cuts out any incoming modulation. Can anyone help?
Thanks
Mac Pro Mac OS X (10.4.8)

It's good to know someone else is having a similar problem (if one can call that good!)
I've been poking around and I've also noticed this: If I create a cello part in Garageband, articulation works everytime I open it. If I take that Garageband song and open it in Logic, articulation still works everytime I open it. The Logic file in this instance is saved as a "Logic Song." I don't know how to tell, but I'm assuming the Logic song is drawing it's sound files from the Garageband song (I don't know how to check that).
However, if I save the newly created Logic song as a project - with all sound files being copied to folders within a master project folder - articulation does not work when I reopen the file.
Strange. And frustrating.
MacPro 2.66 2GB RAM & Powerbook 400mhz "Pismo" Mac OS X (10.4.7)

Problem open logic pro 7 songs made on other computer

i cant seem to load my iso that i have made on another logic - same spec logic etc..
this comes up - Damaged Song or not a Logic Pro Song! Search for fragments?
then when i click search, its aborts.
Anyone know why this problem is occuring?

thanks very much for helping me. the other computer is a new g5 desktop, with logic pro7 also installed on it.
i have made a track on the desktop in our studio, it includes samples that we have cut up, and plenty of midi controlling our outboard keyboard set up.
I just bought a new macbook the other day, installed logic. I then tried opening the logic file that i had made on the desktop. it comes up saying that the song is damaged etc. I then tried to put my autoload file that i have always used on logic, and it had the same problem, HOWEVER,for some reason this now works when i tried again.
So i am a little confused as to why i cant open the new tune. Other tunes seem to be opening, but they are from a long time ago. I need to work out why recent songs arent opening.
i will try re-saving the original song.. is there anything else that springs to mind that could be causing this?
cheers,

Digidesign Core Audio not working in Logic pro 7.1

Help! I'm not able to use Digidesign's (002 interface) as a core-audio interface for Logic Pro 7. Pro-Tools works fine with the 002. Logic works fine with built-in interface. However whenever I go to change from the built-in audio interface to the core audio 002 interface in audio drivers (in preferences), it won't allow me and I get the following message:
"Audio device has been removed" (press OK) then
"Previously selected audio interface is not available" (Press OK) (digidesign 002 interface has double brackets around the name in the audio drivers). If you try to relaunch driver again it disappears from the drivers list? In addition the "Digi design core-audio " application that opens up on the dock - just says "not connected" and some buttons are greyed out and you cannot "reconnect"?
Is there a conflict of drivers with the OS/Logic version and digi core-audio? I'm running Pro-Tools ver6.4, with digi core-audio 6.9 (updated from 6.4 - didn't solve the issue?), Logic Pro 7.1 and OS 10.3.9 (on a G4 1.25Ghz, 512Ram)?
It seems like a core-audio driver problem - but having updated to the latest version I'm still not getting any joy? Any offers?! Cheers.

Check the FW cable.
Anyway about compatibility Digidesign says this:
Mac OS X 10.3.9 Not Supported
With ALL versions of Pro Tools 6.x for Panther (other than Pro Tools LE 6.8.1 with Mbox 2 hardware only), the highest version of Mac OS X 10.3 that you should use is Mac OS X 10.3.8. There are incompatibilities with Pro Tools 6 and QuickTime 7, which is installed by Mac OS X 10.3.9. If you must use Mac OS X 10.3.9 for some reason, you should revert to QuickTime 6.5.2, available from the Apple website.
cheers
rob

TS4628 onscreen keyboard does not work in logic pro x

onscreen keyboard has stopped working in logic pro x - latest version.
There is no indication of midi in or out on control bar when keys pressed.
also, certain keys do register do not trigger from outboard keyboard instrument.
when playing back tracks, the relevant keys auto depress on the onscreen keypad.
audio output is fine on the system. all keys on piano roll keyboard work fine.
The onscreen keyboard works fine in garageband
have reset all midi assignments in prefs.
have reinstalled the program but the issue remains
silvejon

You have either installed a midi controller that is over riding things or you are running an iOS App that is interfering....
Turn off all iOS devices to test for iOS App
Delete CS prefs to test for conflicting Midi Controller issues...
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove ~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.

Problems starting Logic pro

I have just installed logic pro upgrade software 9.0 then updated to 9.1 logic 7 was installed before this and that fired up fine. on trying to open 9.0 or 9.1 I get the following error
Logic pro quit unexpectedly: opening the report gives the following info:
Process: Logic Pro [268]
Path: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Identifier: com.apple.logic.pro
Version: ??? (???)
Build Info: Logic-16972300~1
Code Type: X86 (Native)
Parent Process: launchd [88]
Date/Time: 2010-01-15 23:28:12.988 +0000
OS Version: Mac OS X 10.6.2 (10C540)
Report Version: 6
Interval Since Last Report: 100998 sec
Crashes Since Last Report: 3081
Per-App Crashes Since Last Report: 35
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/XSKey.framework/Versions/A/XSKey
Referenced from: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Reason: image not found
Can anyone shed any light on my problem?
Cheers

Have a look through this thread:
http://discussions.apple.com/message.jspa?messageID=9879826#9879826

Novation Remote 25SL Not Working with Logic Pro (Logic Automap)

Hi,
I can't seem to get my new Novation Remote 25 SL to work in Logic Automap mode.
I have the Remote SL in Logic AutoMap (template #39). When I launch Logic Pro 7, The Remote SL shows : "Logic AutoMap" on the Left LCD display, and nothing else happens, it seems to be frozen at this state. The Up/Down arrows on the Left side don't change anything.
Any clues why this is happening ?
I have read many posts on this and other forums of user issues in setting the Remote up properly, and have it work in Logic Automode. Tried many configurations, and settings, re-installed sw, OS 1.0.13, but no luck so far.
I would like to hear from Logic Pro 7 users who have successfully setup their Remote SL with Logic Pro 7.2.1 in Logic Automode, and are working with this system without any issues.
This will be very helpful in figuring out if there is something wrong in my settings, or if the unit itself is defective, or I am doing something wrong during the installation of the software ? I have been trying to get this thing to work for the past two days, with no success so far.
The Remote SL should be a wonderful controller for Logic Pro 7 (once it works !) so, I'm being as patient as I can with this thing.
I'm using Logic pro 7.2.1 on a Mac G5 2.5 Quad, Mac OSX 10.4.6
Thanks.

Hi Blaze,
I tried your settings, but no change, the Remote SL is still frozen showing :
"Logic Automap" on the left LCD .
You mention setting "Mixer View 64" well the parameter I see is called :
"Mixer View Fader" which I guess is the same one you are referring to. I set it to 64, it was set to 8, but has not changed anything. Still having the same problem. This problem is dragging into Day 3, what a bummer.
Thanks.

USB Interface Not Working With Logic Pro 9

Hello,
I've had a Tascam US-1641 for several years now with absolutely zero issues on my old PC. Ever since I upgraded to Mac (early 2011 17 inch Macbook Pro running Snow Leopard) I've had nothing but problems with the US-1641. No matter how many times I uninstall-reinstall the drivers and what USB port I plug it into, whenever I turn on the device and it's connected to my Macbook, it crashes my operating system and it freezes everything I was doing. Logic Pro doesn't load and when it sometimes does (10 minutes later), it immediately crashes when I click anything.
I've tried several tips to fix it and nothing worked. The most popular choice was select the default input/output in Logic to the system audio, then quit Logic, turn on the interface, then restart Logic. No such luck. I have to reboot my machine at least 5 times, uninstall/reinstall the driver and hope it works to use the interface. I thought it was the operating system, so I upgraded to Mountain Lion and installed the new driver for Mountain Lion, after of course deleting the other drivers and removing all previous data, and it is still giving me the same problems.
I don't have the money to afford a replacement model or a different interface from a different company, so I'm hoping you guys can help me figure out what exactly it is that's causing the interface to freeze my operating system and crashing my Mac whenever I try to use it. I am getting extremely frustrated at this and as much as I love OSX and Logic, what good is this piece of software if I can't use it? I need help.
Thank you.

The problem lies with Tascam and their inability to write stable drivers for OS X... and isn't anything to do with Logic Pro ..
As you know, you are not the only person to have had this issue and the reality is, while the 1641 might work fine with Windows, when it comes to OS X Macs.. it's an entirely different story... depending on the version of OS XS you are running.
The one tip I have read, that seemed to fix it for most people.. (Though not all) is as follows;
(Thanks to Paulypaulpaul for this)
-uninstall your tascam driver 2.10
-restart
-install driver 1.03
-restart
-plug in your tascam
-goto where you download your drivers (http://tascam.com/product/us-1641/downloads/), scroll down to the bottom where it says firmware, Download the firmware 1.02 (3rd from top under firmware), install it. your control panal should now read 1.03 for your drivers and 1.02 for your firmware.
-install drivers 2.10
-restart
Follow each of the steps exactly.. including all restarts when indicated..
...and good luck...

Amp designer and pedal board not working in Logic Pro 8

Hello! I am new to LOGIC PRO 8 and maybe my silly question has a easy answer. When I want to record a guitar or a bass in the audio channel created for it, and want to insert for example a complete rig, the sound won't load and a message will apper saying "pedalboard not available" "amp designer not available" or pedal not available". If I open Mainstage 2 or Garage Band and I play, pedals are working and all amp modulation as well. If I go and look into the application support and plug-in settings folders it seems to me that everything is there. What am I missing or doing wrong? how can I solve the problem and make these enable for recording? THANK YOU FOR HELPING!

primocaster wrote:
"pedalboard not available" "amp designer not available" or pedal not available".
Hi
Amp Designer and Pedalboard plugs are in Logic 9 only...
CCT

M-Audio Fast Track USB interface not compatible with Logic Pro X and Yosemite

Hello All!
I've been trying to simply record some guitar and vocal tracks onto the latest version of Logic Pro X. It worked before I downloaded the update of Yosemite, however now, I can't find a solution to my problem. I've tried everything! Installed new drivers onto the M-Audio and even tried to search for a later update of Yosemite. I have read a few things online about how Yosemite doesn't accept 3rd party drivers. So any USB plugged in to the macbook/mac that isn't mac based it doesn't accept.
Please can someone help me solve his issue!
Thankyou!
Felix

I know many, many of us who are running things just fine.
I have to be really honest with you Ben and say... Where are you getting that idea from because it simply isn't so.....
I have a quite large client list of Logic users from all over the world... and of those that have attempted to use Logic Pro X and Yosemite together... over 80% have had to revert back to a previous configuration because of performance and/or stability related issues...
I personally, have on test here at the studios... 7 different Macs ranging from 2010 Mac Mini i7 Servers to 2011 32GB 3.4Ghz iMacs.. to a maxed out 2013 i7 MBP to a top of the line 2014 Mac Pro and all have demonstrated issues regarding performance and stability with LPX and 10.10.x using a variety of different Audio/Midi interfaces, all of which have supposedly 10.10 compatible drivers... and all of which have no such issues running LPX under Mavericks...
Just a quick scan across the various forums.. indicates that very few people are successfully running LPX under Yosemite without performance problems.... so that's why I am asking where you are seeing 'many many people" because I am just not seeing that myself...
Cheers..
Nigel

Persisting Cut-off or unplayed notes problem in Logic Pro X

Similar Messages

Maybe you are looking for