Person assignment table

Hi all,
Im looking for table which shows the relationship of person assignment to wbs.
when we assign through edit....wbs...Project teamfor WBS.
Is their any report or table.
Regards

Hello
The list is available in HRP1001 table. You can retrieve the employee number from there and collect the First name and Last names from PA0002 table.
Regards
Renjith
Chandra - the above has been copied from the message Ahmed has suggested.
Virendra

Similar Messages

Person assigned to a work center

Hi,
We are using work force planning to assign resources to activities. We have some problem with one of the work centres. When we click on the person dropdown box in the personal assignment tab then we would expect to see the individuals that are in the work centre associated with the activity. We can see six persons from project builder and when we checked work center master data we could see only four persons.
When checked thoroughly, the data at work centre master data is picked from HRP1001 and its showing only 4 persons. At the project level, the data is picked from the same table but initially fetches with work centre as input and then capacity ID as input. Finally it combines the data (6 Persons) and show from CJ20n and its different from the work centre data.
is this the standard behavior or we missing something
Regards,
Laxminarsimha

I think you have assigned two person at capacity category level for that WC.
Open your WC in CJR3 --> Click on capacity header icon -->on new screen click on HRMS link button ( check no of person assigned here it should be two )
With Regards
Nitin P.

CJ20N - person assignment tab data

hi,
We need to retrive data from CJ20N - Person assignment tab details. Please help, from which tables we can get those details...
Thanks,

hI,
In fact I want to get first person name which assignmened, in CJ20N - "Person Assignment" tab of WBS->network activity
here is the below table is showing in CJ20N, we have to retrive "Atkinson" name ...please help
                                                                                Spl    Person      D Date       Time Work      Un. Duratn Un. Reqmts      Un.
   1      Atkinson      04.08.2009 00:00     160.0 HR     80.0 DAY     160.00 HR
   2                         04.08.2009 00:00     261.0 HR     32.6         261.00
   3                         04.08.2009 00:00                                 0.00
   4                        04.08.2009 00:00                                 0.00
   5                        04.08.2009 00:00                                 0.00

How to change the default date in Person assignment tab?

Hi experts,
Does anyone know how to change the default date in person assignment tab in cj20n? Currently, the system always take the scheduled finish date to the date of the person assignment tab. Can I change it to the start date?
Thanks and rgs,
Michelle

Hi Michelle,
Goto SPRO->Project system->Dates->Scheduling->Specify Parameters for Network Scheduling, Here you can control the workforce planning dates.
Hope this is useful...
Regards
Aatish

Problem in Assigning table to access sequence

Dear All,
i am facing problem in assigning table to access sequence for billing output type.
I have created 1 table B902 with the combination of Sales org,plant ,Division,Billing doc type.
but if i am going to assign with access sequence system is taking for Billing type & division & for other its showing red marks & errorr.Access sequence->Aceessess->Field.if i am clicking on field in I/O column for plant its displaying negative.
bcause of this i am not able to make condtion record.
Message is Select a document field for WERKS
Regards
ajit
Edited by: SAP SD AJIT on Mar 1, 2010 3:18 PM

Hi SAP SD AJIT ,
Go to IMG --> Sales and Distribution --> Basic Functions --> Output control --> Output Determination --> Output Determination using condition technique --> Mantain output Determination for billing document --> Mantain condition table, in the pop-up choose the option "Field catalog: Messages for billing documents", there you can add standard field into the catalog, so you can add WERKS and the other one "document structure" I don't know what field it is, but if it is and standard field you can add it. If you have a Z field you need ABAP help to add the Z field to the structure "KOMKBZ5" and then you can add it to the catalog.
Regards,
Mariano.

SRM 7.0 Add Fields in Account Assignment Table

Hi SRM Gurus,
I am working on SRM7.0.
I want to add two fields in Account Assignment Table in Account assignment tab of Shopping cart Item.
I can do it using WebDynpro Enhancement framework , i.e.
1) Create an append structure for Structure INCL_EEW_PD_ACC_CSF
2) Enhance WebDynpro Component : /SAPSRM/WDC_UI_DO_ACC - Component controller node
3) Map this with View V_DO_ACCOUNTING Node
4) Create the necessary Table Columns and Column editors in Account Assignment Table
However i think using SPRO configuration and enhancing few structures also this can be achieved.
Can anyone guide me on how can i achieve it without creating WebDynpro ABAP Enhancement?
Regards,
Ashish Shah

I've never done it with account data, but yes with header and item.
I think in this case you need to add these fields in SPRO:
SAP Supplier Relationship Management --> SRM Server --> Cross-Application Basic Settings --> Extensions and Field Control (Personalization) --> Configure Field Control --> Configure Control for Fields of Substructures --> Metadata for Fields of Substructures and Table-Like Enhancements
Adding the fields with "Set Type" = 31 Accounting...

Color coding in the "Date" and "Time" field in "Person Assignment"

Hi,
What does it mean when the color of the values for the "Date" and "Time" fields under the tab "Person Assignment" on an activity element in the project builder (CJ20N) turn red?
Regards,
Petter Kvalvik

Hi,
I dont suppose we have any option to achieve this at Query Designer level. Your requirement can be achieved in Workbook,
Insert text template in one of the cell in your workbook, context menu--properties-Constant Tab----Check Display last Refreshed. Doing this you will get Date and Time of last refreshed data.
Thanks,
Vishnu.

SAP APO 5.0 Assignment Table and Like Profiles

Hello,
Is the any way to extract all the entries in either of the like profiles or the assignment table.
I tried the System -> List -> Save but all the options are grayed out.
Any feedback wold be greatly appreciated.
Thanks

Hi,
I am not sure which entries you want exactly...However there are couple of tables related to like profiles in which LIKEID is there.
/SAPAPO/DP440G- Master Forecast Profile (APO0300)
/SAPAPO/FCST_LC - Assignment Table: Lifecycle Profiles to Charact. Value
/SAPAPO/FCST_LC1 - Assignment Table: Lifecycle Profiles to Charact. Value
/SAPAPO/T445LIKE - Table for LIKE Dependencies
/SAPAPO/T445LIKK - Header Table for LIKE Dependencies
/SAPAPO/T445LIKT - Text Table for Like Profiles
/SAPAPO/T445LIPR - Table for Life Cycle Planning
I hope this will help you at some extent..
Regards,
Saurabh

Lifecycle planning assignment table

Hi
In the Assignment table, when i am entering the Product number and trying to select the either Like Prfl/ PIN or P out profiles, its not happening. But I can enter the profile names manually. But unable to choose from the drop down profiles. Also the profile dates do not show up.
also, sometimes, when i am hitting ENTER on keyboard, the product number is disappearing or the whole line.
Anyone know why this should be happening ? We just upgraded our system from 5.0 to SCM 7.0.
Any hint is appreciated.
Thx
Venkat

closing the thread. Fixed by applying a note.

Sales person assigned to an account?

On which screen of the WEB UI can i see a sales person assigned to an account?

Hello!
Within the Account Overview Page there is the Assignment Block u201CRelationshipsu201D. Here all Employees related to this Account are listed here with the Relationship u201CHas the Employee Responsibleu201D.
In addition the u201CMainu201D Employee Responsible is visible in the Header of the Account Overview Page directly.
The main Employee Responsible is also visible directly in the Account Search-Result-List.
Within the Employee Overview Page you can see the other direction of the Relationship. Here the Relationship is u201CIs the Employee Responsible Foru201D.
Best regards
Arno

PS Workforce planning, Person Assignment in internal activity.

Hello PS colleagues!
Im trying to use the workforce planning functions but I can not get the screen for person assignment in the internal activity.
I have done this, IMG I go to this path:
Project System -> Structures -> Operative Structures -> Network -> User Interface Settings -> Layout of Activity Detail Screens -> Define layout activity detail screens
Then I create all tab, I copy the standard to my network profile and there is tab 8, in standard is call Admin. then when I try it out it do not appear in the project, I use project builder.
Does any one what more I need to do for this to work??
Please help me out with this.
Best Regards
Jose Marin

Check the consulting note 543362
This note explains the steps/configuration node that needs to be in place for workforce planning
Regards
Sreenivas

BAPI to upload Person Assignment data under network activity

Hello All!
Can anybody tell me the appropriate BAPI that can upload the data of Person Assignment tab under network activity of Project System(TCode:cj20n)? I.E. data like Split Person Date Time Work Un and others data.
Thanks in advance.
Regards.
Sarbajit

Hi Majumdar,
you can find it by running transaction ST05 against CJ20N.
try bapi-
BAPI_PROJECT_MAINTAIN
Regards,
NaPPy

Error number assignment table pointer (no.range object HRTABNR) - LSO_PSV2

Hi ALL
On LSO_PSV2, when i create a course:
Error number assignment table pointer (no.range object HRTABNR)
Any ideas?
Thanks in advance
Sony

Hi Sony,
Please go to SNUM t-code and make sure there exists an interval for object HRTABNR.
Regards,
Dilek

Person assignment tab

Hi,
Iu2019m not able to get person assignment tab for the activity in cj20n.
I have maintained work and workcenter for each activity.
Can any one help me on this, I have checked note 543362 and have maintained the same.
But i dont know what is missing.
Thanks,
Chandru

Hi Chandru
Actually the note 543362 (written by me) should give you all the information. Anyway double check the following again.
1. Is the flag 'capacity requirement' of network set?
2. Is the scheduling for network done?
3. Is the work for activity maintained?
4. Which work center is maintained for involved activtiy. Call CR03 for this work center.
4.1. In work center, in the capacity tab. Is the formular for field 'Other formular' maintained. Default is SAP008
4.2. Click of button 'HR assignment', is the HR resource assigned?
If all the checkitems do not help, you can open a customer message to let SAP have a look.
Kind rgards
Zhenbo

Internal assignment table that maps the ERP & CRM Partner ID's

Hello Experts,
In CRM-ISU integration,
If we are maintaining different number range, in which table its maintaining the details of both Business PartnerID's
or how they link each other?
In one document i read this statement.
"There is always an internal assignment table that maps the ERP business partner ID to the corresponding CRM business partner to ensure a consistent data exchange."
thanks in advance,
Sreejith

HI,
In CRM there is a table BUT0ID which stores the ERP business partner ID as ID Number against CRM business partners.
Pass the CRM BP in the Business partner field to get the ERP BP number in the ID number field.
Regards,
PP

Person assignment table

Similar Messages

Maybe you are looking for