Person Responsible Table Field

Hi,
I need to find a table for "Person Responsible" field maintained in Service Order IW33.
I need to get the person responsible based upon Order number.
AUFK-USER2 does not contain any value for AUFK-AUFNR (Order number)
Suggest the required table.
Please help!
Thanks

Table Name :  VAFILOA
give the order number in VAFILOA table and pick the INGPR (Planner Group for Customer Service and Plant Maintenance),GEWRK.
INGPR  description you can find in table  T024I.
give GEWRK field to OBJID in table CHRD. pick the fields ARBPL,WERKS
give two fields ARBPL,WERKS in table M_CRAMA pick the discription Mn.wk.ctr
Regards,
Kiran  ( HPL )
Edited by: Kiran HPL on Dec 14, 2009 8:07 AM

Similar Messages

  • Person Responsible & Department field

    I want to make Person Responsible field and Department field mandatory, so that i can view the values in the Preventive Maintenance as well as Calibration Order.
    can anyone tell me the complete procedure on how to go ahead and make it possible?
    Thanks in Advance
    Abhi

    I am takingthe following steps
    spro --> plant maintenance & Customer Service --> Master data in Pm&CS --> Basic Settings --> Partners ---> Determine Partner Determination proc  & Partner Funct --> Undr this am selecting the partner object as Plant Maintenance ->Cjange Partner  button-->creating a new partner det proc as PM >Selecting the PM and then clicking on the Partner Functions Folder-> am ending up with a tabular column with lots of fields
    Now here i can see department responsible (partner fn as AB) and also Person responsible (Partner Fn as I3 also as VW) ---> hw to make them mandatory... which is the check box to select and what all values i need to put there?
    Kindly let me know
    Thanks Again
    Abhi
    Edited by: Abhi1703 on Apr 22, 2011 3:41 PM

  • Add Option of choosing values from list in "Person Responsible" field of Cost Center Master

    Dear All,
    Could anyone advise me how can I add the option to Choose Values from list to field "Person Responsible",
    in Cost Center Master Data ?
    The Technical Name of this field is VERAK, and currently it is an open field.
    I would like to allow the user to choose values from existing list.
    Thank you!
    Orly

    Hi Orly,
    You have take it to your ABAPer, who will have to modify the attributes of CSKSZ-VERAK field in CSKSZ structure. ABAPer will have to define it with foreign key and introduce the name of the table, which will be used for deriving the available values. No standard table exists for it, but you can either create your own Z-table or take it from users table (USR02) if you have the necessary information there. Of course, this action would account for modification of standard SAP structure.
    Regards,
    Eli

  • Field for Person Responsible

    Hi
    In plant maintenance, which table holds the field for CYSPLTIN-SHORT
    it is the person responsible for a notification.
    Your time and answers will be returned with points.
    regarsd,
    maria.

    Im not able to trace this CYSPLTIN-SHORT..
    can u navigate the process..
    in plant maintenance check these tables.
    IN TABLE QMEL
    check the fields ..
    ERNAM
    AENAM
    QMNAM
    also check table QMMA,
    QMSM,
    regards,
    vijay

  • Hide Person Responsible field for IW21

    Hello,
    As a business process requirement, we were requested to hide or greyout  the "Person Responsible" field in IW21.
    Can any one help us set that up.
    Thanks.

    To Hide,
    Config - SPRO  - PM & CS - Maintenance service processing - maintenance and service notifications - Notification creation - Partners - Define partner determine procedure and partner function - Assign partner functions to notification type - select the notification type and detail - remove selection from " Person responsible" ( Blank)
    To display
    Create transaction variant to display.
    -S.N

  • Problem in makeing the Person Responsible field as mandatory

    I am taking the following steps
    spro --> plant maintenance & Customer Service --> Master data in Pm&CS --> Basic Settings --> Partners ---> Determine Partner Determination proc & Partner Funct --> Undr this am selecting the partner object as Plant Maintenance ->Change Partner button-->creating a new partner det proc as PM -->Selecting the PM and then clicking on the Partner Functions Folder-then i have selected the the check box and saved
    after that i have created the maintenance order but it is not showing as a mandatory field, may i know the actual problem in this

    Hi,
    1. If u want to make Partner as Mandatory for Maintenance Order then the config path u have given is correct and at the same time check whether that partner procedure is assigned to order type in OIOM ..
    2. If ur looking for Making Person Responsible field as Mandtatory then check under field selections in config path
    else u can use user exit ;- IWO10009 PM Order: Customer Check for 'Save' Event to perform validation while saving .. u can have an error message to be poped-up to fill that field filled..
    regards
    pushpa

  • Person Responsible field Account Details Relationship

    Hello experts,
    we are using CRM 2007 and at the Account Details there is a field 'Person Responsible' where it appears the Standard relationship 'BUP011'.
    I wanted to ask if there is anyway in customizing to show a different relationship...
    I found that there is an entry in the BP_HEAD/AccountDetails in Context Node 'EMPLOYEERESPONSIBLE' at the attribute STRUCT.PARTNER2 the method  SET_PARTNER2. I changed the entry but it didnt work...
    Any help??
    thank you in advance
    M

    Hello Ton
    follow advice contained in SAP note 21686
    br, Guido

  • PM Order: Get Person Responsible

    Hi All.
    Does anybody know where the table is where I can find the personnel number and/or personnel name of the person responsible that links to a specific order?
    If I have the pernr, I know how to find the employee
    in the relevant HR table.
    I apppreciate any help.
    Sincerely
    Ryno

    Hi Ryno Boyens ,
    <b>1</b>.
    Use AUFK-ERNAM field .This is user ID of Who has created ORDER .
    <b>2</b>.
    Use Infotype table PA0105 (Communications IT).
    Get the PERNR from this table like this
    Select single PERNR
    from PA0105
    into l_pernr
    where subty = '0001'
      and usrid = AUFK-ERNAM
      and begda le sy-datum
      and endda ge sy-datum.
    <b>3</b>.
    The below is must.
      and begda le sy-datum
      and endda ge sy-datum.
    <b>4</b>.
    After getting PERNR from that table get emp name from PA0001
    Select single ENAME
    from PA0001
    into l_ename
    where pernr = l_pernr
      and begda le sy-datum
      and endda ge sy-datum.
    I think that it helps u .
    <b>Thanks
    Venkat.O</b>

  • Purchase requisition release strategy - projects person responsible

    Hello,
    I want to create a characteristic in CT04 that contains the person responsible of a project (CJ20n).
    What would be the table and the field for that?
    Thanks
    Anne

    Hello,
    I have tried that, I have created a new characteristic for that field.
    Also I have created 2 new groups (20 and21), Codes and strategies.
    The only difference for the data I have entered for the two strategies (CL20n) is the perosn responsible field (20 and 21).
    Now I assign person responsbile 21 to a project and its WBS element and create a PR on this wbs element.
    A strategy comes up, but the one for group 20 and not for 21...
    It almost looks like it takes the first strategy with account assignement P in the PR.
    Thanks
    Anne

  • Person responsible in COPA thru settlement

    Hi,
    Is there any possibility of getting the person responsible in COPA as sales person when the project is settled? If so, pl share the details of user exit to be used.
    Regards,

    Hi,
    You can create a Derivation rule- Table look up on PRPS and derive the field PRPS-VERNA and map the same with a COPA Characteristic.
    Hope this helps
    Regards
    Venkat

  • Person responsible from HR master data

    Hi Experts
    The person responsible is defined in a customizing table.
    Is it possible to map the person responsible from HR masters in stead of defining seperately (Because all personnel are already defined in HR).
    Warm regards
    ramSiva

    these are two seperate things
    firstly -  you may have a person reposnsible for a WBS who may not be an employee
    secondly - not all companies use SAP HR module
    thirdly - person repsonsible is used for authorisation - so I can set up all person rep starting with 10000 etc for a specific type of project
    fourthly - this field is also used by IM module
    so hence SAP has this seperate - if you want to use HR employee number then you may do so but yoiu have to maintain this table

  • PS on ERP not update after changing person responsible on PPM Phase or Task

    I've implemented BADI DPR_FIN_GECCO_ATTR to update additional attributes on the ERP side, such as person responsible and some of the user fields.  In a normal create of the project everything works fine. When only the person responsible is updated in cProjects no update occurs on the ERP side.  Everything is updated properly on the PPM side, there is no error on COCPCPR, but the person responsible field is not updated.  If the person responsible is updated on the PPM side and also another field, like the long text, everything works fine. For some reason, the change of just the person responsible does not trigger a replication on the ERP side.
    Has anyone come across a similar situation?  Is there a way to trigger that the ERP side should be updated?

    Hi Experts,
    I've been able to identify the problem and need help with the solution.  The problem when just the person responsible is changed on a task in PPM is that change is recognized as a change to the object CL_DPR_ENTITY_LINK.  This type of change does not identify the task and insert a record in the change table for the task object.  In method ON_APPLICATION_OBJECT_CHANGED of class CL_DPR_APPL_OBJECT_CHANGE_MNGR the table mt_updated_objects needs to be updated with the task if it is not already present when this type of change occurs.
    My question is how can I get the task object associated with the DPR_ENTITY_LINK object to insert into that table?
    Points will be rewarded for right solution.

  • Getting the Person Responsible from Requiremts Assignmts Tab in Service Ord

    Hi,
    I am trying to get the person responsible for a particular operation from the Requiremts Assignmts Tab in Service Order.In the IW32 transaction,in the requirements assignment tab for a particular operation when
    I look at the technica information of the field where the person is assigned, I see that it is on Structure : CYSPLITIN, field: SHORT.
    I need to know the actual database table or link to the operation/activity where I can read the person from in an ABAP program.
    Please find below the SQL trace for your reference.
    Transaction          ?     Work process no                    18     Proc. Type               UP2          Client          100          User          AAAAAAAA          TransGUID          4877F6D607E15917E1000000C0A8D032          Date          12.07.2008
         Duration     Obj. name                    Op.     Recs.               RC     Statement
                 7     VBHDR                    REOPEN                         0     SELECT WHERE "VBKEY" = '4877F6D607E15917E1000000C0A8D032' FOR UPDATE
               697     VBHDR                    FETCH         1                    0
                 6     VBMOD                    REOPEN                         0     SELECT WHERE "VBKEY" = '4877F6D607E15917E1000000C0A8D032' AND "VBRC" <> 0 AND ( "VBMODE" = '2' OR "VBMODE" = '4' OR "VBMODE" = '5' )
               241     VBMOD                    FETCH         3                 1403
                 6     VBDATA                    REOPEN                         0     SELECT WHERE "VBKEY" = '4877F6D607E15917E1000000C0A8D032' AND "VBMODCNT" = 1 AND "VBBLKNO" >= 0 ORDER BY "VBKEY" , "VBMODCNT" , "VBBLKNO"
               233     VBDATA                    FETCH         1                 1403
                 7     TMC2F                    REOPEN                         0     SELECT WHERE "MANDT" = '500' AND "ZEITP" = 'I3' AND "KBTCH" <> ' ' ORDER BY "MANDT" , "ZEITP" , "SUHIE" , "STAFO" , "KBTCH" , "FPROG" , "FROUT"
               363     TMC2F                    FETCH        44                 1403
               496     MCIPMIS                    REEXEC         1                    0     UPDATE SET "STWAE" = 'EUR' , "WAERS" = 'EUR' , "EQUNR" = '000000000003000200' , "BEGRU" = ' ' , "EQTYP" = '1' , "EQART" = ' ' , "INVNR" = ' ' , "ANSDT" = 00000000 , "ELIEF" = ' ' , "HERST" = ' ' , "SERGE" = ...
                 6     VBDATA                    REOPEN                         0     SELECT WHERE "VBKEY" = '4877F6D607E15917E1000000C0A8D032' AND "VBMODCNT" = 2 AND "VBBLKNO" >= 0 ORDER BY "VBKEY" , "VBMODCNT" , "VBBLKNO"
               273     VBDATA                    FETCH         1                 1403
                 8     VBDATA                    REOPEN                         0     SELECT WHERE "VBKEY" = '4877F6D607E15917E1000000C0A8D032' AND "VBMODCNT" = 7 AND "VBBLKNO" >= 0 ORDER BY "VBKEY" , "VBMODCNT" , "VBBLKNO"
               523     VBDATA                    FETCH         1                 1403
               774     VBMOD                    REEXEC         8                    0     DELETE WHERE "VBKEY" = '4877F6D607E15917E1000000C0A8D032'
               476     VBDATA                    REEXEC         8                    0     DELETE WHERE "VBKEY" = '4877F6D607E15917E1000000C0A8D032'
               173     VBHDR                    REEXEC         1                    0     DELETE WHERE "VBKEY" = '4877F6D607E15917E1000000C0A8D032'
               698                         EXECSTA         0                    0     COMMIT WORK ON CONNECTION 0
         Transaction          ST05          Work process no                    0     Proc. Type               DIA          Client          100          User          AAAAAAAA          TransGUID          4877F79907E15917E1000000C0A8D032          Date          12.07.2008
         Duration     Obj. name                    Op.     Recs.               RC     Statement
                10     TFDIR                    REOPEN                         0     SELECT WHERE "FUNCNAME" = 'PERFORMANCE_TRACE_OFF'
               461     TFDIR                    FETCH         1                    0
                 8     TFDIR                    REOPEN                         0     SELECT WHERE "FUNCNAME" = 'SQLT_TRACE_OFF'
               303     TFDIR                    FETCH         1     
                   0
    Regards,
    Sophia Xavier

    Hi Sophie,
    Check if these FMs helps you anyway -   RH_READ_OBJECT or RP_CHECK_PERNR
    I found them in include program - LCOI0F14 . Give a breakpoint in these FMs and check how they are working.
    My system unfortunately dont have any service order ( or i dont know how to see that )
    Cheers
    Kothand
    Edited by: Kothand on Jul 12, 2008 10:19 AM

  • PM: PERSON RESPONSIBLE FROM IW38

    Folks,
    I am a BW consultant and I am trying to extract the person responsible in IW38.
    Can anyone advice me which table has this. I need to extract this as an attribute of pmorder.
    Thanks.

    figured it out.
    Lookup caufv using aufnr and pickup objnr
    With this objnr look up IHPA for parvw=vw and counter=000000 pick field parnr.

  • In CJ20N, unable to change the "Person Responsible"

    Hi,
    In cj20n, When I create a new WBS under a project, the system defaults the Person responsible from the Project level.
    The field is display only and I am unable to change it.  There is no substitution active in the project profile.
    Could anyone help me to change the config so that the user can maintain the "Person Responsible" at the WBS level for the existing projects & the newly created projects.
    Thanks in advance
    WD

    Hi.
    Dd you check (OPUK) the field selection settings for this field? You can make it editable entry in there.
    Regards
    Sreekanth

Maybe you are looking for