Personal and room video equipments in same videoconference

My problem is:
We have to make videoconference using CUVA and videoconference room system. We would like pictures with good quality on both systems. We use MCU3515 as Conference Bridge. On the room equipment we need 4CIF format because the CIF format does not give good quality on the room display. Unfortunately the CUVA cannot handle the 4CIF format.
How can we solve this problem? Can the MC3515 send the mixed picture with different format to endpoints with different capabilities? Or are there any possibilities to handle 4CIF by CUVA?
The central elements of the video phone system are:
The MCU3515 is connected to UCM6.1 via SIP trunk. The Room system is connected to UCM6.1 as SIP phone.
Thanks in advance,
Laszlo

Welcome to the discussions, W5QAP.
Unfortunately, Keynote doesn't have any kind of stringent timecode to go by. Because of this, if you have a need to have perfect timing from show to show in a presentation, you'll have to use something other than Keynote.

Similar Messages

Is it possible to output to div monitor and s-video at the same time?

I'm editing video and want to see the broadcast results on the fly (ie monitor and tv side by side, same image onscreen). Is it possible to output to div monitor and s-video at the same time? Maybe thru a splitter cable. I'm concerned about resolution issues.

This is not possible with a mini.

Acquiring data from daq-pad and saving video at the same time

I am trying to record data from my daq-pad at 100 samples per second. At the same time I am using a usb interfaced camera to record a video feed. The idea is that when i begin recording data i also begin recording the video feed.
The way I record the video feed works fine in its own VI (I need it to record at 30fps and it does this just fine). But when I integrate it with the data record/capture VI the framing rate slows down to only 10 fps. I suspect this is because the VI gets caught capturing the data from the daq-pad thus slowing down its ability to record the video feed. I was hoping you could give me some help with how to record the data at 100 samples per second and get the VI to capture 30 frames per second. Thanks in advance for anyone who helps out.
I've attached the VI that has both the data capture and the video capture already integrated.
Attachments:
usa_swimming with video21.vi ‏892 KB

Hi,
I took a look at your code and the problem is that you have both the data acquistion and the image acquistion in the same loop. Have you tried using parellel loops? There is more information about this in the labview tutorials that are available online if you are unsure how to do that. The problem is that you are doing a lot of things in that loop (acquiring data, doing some analysis, and writing to file), so you can't acquire images very fast because it depends on the speed of the loop iteration. I hope this helps.
Have a great day,
GG

Are the 30Gh and 60Gh Video iPod the same dimension?

I'm wondering if the 30gig and the 60gig video iPods are the same dimensions? I'm looking to buy that Video iPod protective case, and the item's description says: "Fits a 30G iPod" Is there a size difference between the two of them??
Thank you,
Andre

"But here’s the kicker: At under half an inch thin, the new 30GB iPod takes up about 45 percent less room than the original iPod. Even the new 60GB model is over 10 percent thinner than the fourth-generation 30GB iPod. More features in less space? Sounds like iPod."
Its a bit thicker than the 30gb.

Dual screen-annotate and watch videos at the same time?

Does anyone know a way to annotate pdfs while watching a video lecture at the same time? I have tried notability and side by side but both lack the capabilities to do both. Thanks

@kalos
Uninstalled everything PA, also uninstalled mangler which was the only thing that depended on PA. It didn't work anyway.
No pulseaudio --kill command so I couldn't run.
Checked systemd journal and there is no mention of PA this time.
Checked top, and grepped ps aux and there is no PA there either.
I also rebooted the machine completely just to make sure. However VLC and HTML5 have the same incompatibilities.
_ vlc Videos/anime/fmab/01.mp4
VLC media player 2.1.5 Rincewind (revision 2.1.4-49-gdab6cb5)
[0x1bc30f8] pulse audio output error: PulseAudio server connection failure: Connection refused
[0x1af4118] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
[0x7fb604001248] main vout display error: Failed to resize display
But the video and audio did work until I ran some HTML5 video, after which the audio worked, and then I opened it again and it didn't work...
@nomorewindows
I see. That's too bad. At least we're not alone.
Last edited by Greduan (2014-11-14 01:34:29)

USB Ports and AGP Video Card on same IRQ

I've got a tough one. I have 6 USB ports. Call them 1,2,3,4,5,6. Ports 1 and 2 work fine with my new USB 2.0 80GB External Harddrive. This pair of ports 1 and 2 are direct into motherboard.
However system crashes when I plug USB 2.0 External Drive into ports 3,4,5,6. These are Dports with cables that plug into the MB. One of these Dports has the four error lights which are all green. Western Digital has cautioned against sharing this drive with other IRQs. Says that the video card and the WD harddrive require dedicated IRQs...but I have no control of how W XP assigns them.
Ports #3-6 work fine with mouse, scanner, and printer etc. However they fail when trying to use WD External Hardrive.
I also checked IRQ settings and IRQ 16 is used for a USB Port and for my MSI AGP video card. I believe this conflict is the cause of the problem.
So help..how do I fix this dilemma?
I have Windows XP and see no way to change IRQs.
BIOS does not even show IRQ as a choice..only 1-15. Also BIOS is latests version for my MSI 845G Max L MS-6580 mother Board. USB drivers are all Intel. Video Card Is MSI AGP MS-8878 G4Ti/MX 420 w TV out. Bios and Drivers are current.
How can I run the USB 2.0 External Harddrive in Ports 3-6?

I did load new Intel INF Drivers and AGP drivers yesterday.
No luck USB Ports 3-6 still fail with External Hard Drive.
I'm not clear on how to turn back on AICP or ACIP. BIOS?
Also not IRQs 16-23 are listed with active devices on the Device Manager
16 has a USB Controller at 24c2
16 also has AGP video card
17 has Audio '97
17 also has Fast Eternet.
18 has USB Controller at 24c7
19 has USB Controller at 24c4
23 has PCI to USB Interface.
Port 3-6 do work fine with mouse, dig cam, Scanner, printer. These ports only fail with External Harddrive plugged in. Ports 1and2 work fine with external HD??
So question is how do I check on the IRQ ports using AIPC or APIC...or whatever the name is...thanks folks.

Playing and saving videos at the same time

Hi~
I wanna download a movie clip from the Web and play it, and at the same time, save the clip onto the local disk. So next time I play the clip, no more downloading.
my environment is Flash CS4 and AIR.
I looked up three classes: NetConnection, NetStream, VideoPlayer.
give me some hints~
thanks.

I found this tutorial and was going to try it out. http://tdotblog.info/?q=node/1 It looks pretty simple and and works with AIR.

Can i play audio and record video at the same time, disabling the external mike, so the video has that audio?

can i play audio while recording a video so that the audio is recorded with the video? .. disabling the inboard mic, ? .. thank you

Hi SwedelostinAmerica,
Welcome to the Apple Support Communities!
The iPhone can maintain multiple pairing records, but it can only connect to one headset or hands-free device at a time. However, in your situation there may be a solution. You can connect the iPhone via Bluetooth for calls and use the 3.5mm jack on your iPhone and car radio to connect for music.
The following article explains Bluetooth pairing and usage. Please use it as a reference.
iOS: Third-party Bluetooth accessories
http://support.apple.com/kb/HT1664
Have a great day,
Joe

Combine 720 and 1080 video of the same performance?

In early November I have been asked to video a performance. I have 720 and a 1080 cameras. What can I expect when I edit. I will be using jus one camera for audio source. I am using OS 10.8.5. Plan to use iMovie, but Final Cut Express is available.

I would just buy a new kit: http://www.crucial.com/store/listparts.aspx?model=Pavilion%20g6-2040nr&Cat=RAM
It's less than $40.

HDMI and Component Video at the same time?

I'm trying to connect both outputs of the Apple TV at once. HDMI to the projector and the component to my receiver. I want to be able to get a preview of what I'm going to be watching before sending it to the projector.
Is there a way to have both outputs active? I just need one component or composite output for my preview.

Wiqui wrote:
Is there a way to have both outputs active? I just need one component or composite output for my preview.
no.
HDMI takes precedence and will disable component when an HDMI cable is connected

How do I get to synchronise 3 videos of the same thing from 3 different Angles to play in a FLA and switch between them?

Hi all,
It's been a long time since I was on here... well here goes(I need a bit of technical help with a question if I may)
This client of wants a flash video player of a model, modeling some clothes.
They are going to set up 3 different cameras around her at the same time filming her - one from the front, one from the side and one from the back. Each clip lasts exactly 3mins and they are filming her at THE SAME TIME.
Now after this, they want to put a FLASHPLAYER on their website with the video playing in a screen with 3 buttons underneath one saying FRONT VIEW, one saying SIDE VIEW AND one saying BACK VIEW. The three separate videos will be integrated in some way with this one flash file.
The video player might start playing the FRONT VIEW first.
BUT lets say 30 seconds into the clip I press the SIDE VIEW button the video switches to the side view on 30 seconds - The side view video doesn't play right from the start. Like I said before for example if the person is speaking and says "hello there", if you switch angle by clicking one of the buttons just at the point after she has said the word "hello", you switch to the angle where he is just about to say "there". If you see what I mean.
As I said before there are 3 separate video clips:- FRONT VIEW, SIDE VIEW and BACK VIEW. Now I am not sure if these have to be embedded in the FLA file or can be contained in a separate folder on the server so that the SWF can access them. I am worry about streaming over the internet thats why I THINK Flash Media Server3 MIGHT be a solution BUT I don't know. BUT they must be seamless.
AGAIN to reiterate...LETS say I am watching the SIDE view 30 seconds after the clip has started and the model starts scatching her head and then AT THAT POINT I click the front view button below I see the model scratching her head from the front view at THAT precise moment.
So all the videos seem to work at the same time to the casual viewer/user and it looks as though you are just switching views whenever you want.
I have been looking all over the net to see if someone has produced a working example or if there is a tutorial somewhere but I have found NOTHING.
I think there might be a problem pulling this one off as each video clip could be 4-5 MB in size and if they are streaming then there would be download problems and these videos might stop due to people with various bandwidth restrictions UNLESS all the videos were integrated into the flash library and were referenced from within by Actionscript but then the resultant SWF could be HUGE.
I would really appreciate any help/suggestions here and any link to any working samples on the NET that I can download and disect at my leisure.
BTW:-
My email is [email protected]
Cheers

Use Flash Media Server to stream the files.......set up a timer and have all three of them play at once....and have a button switch the streams depending upon which stream you want to play.....and wallah......
you can also capture the stream.time from the video playing and resume from that point on the other videos as well....havent done this theoretically so I dont know how smooth the transistion between streams will be....but it can be done....
plus u may have to use double buffering techniques to make sure it starts up right away......
thelegendaryghost

Personal Cinema and S-Video input

My Personal Cinema FX5200 set up works fine on TV-tuner and Composite Video, and I get good picture quality, and good sound using the Ulead Videostudio 7 software ( and Nero VisionExpress, too)....but when I use an S-Video lead from my VCR into the break-out block, I get black and white images only. I can live with capturing from the composite leads, but why doesn't the S-Video lead work? I have checked and double-checked all the settings, and have run out ogf ideas.
Is anybody else having this problem with S-Video input?
Does anyone have any suggestions where I might be missing something?
Any help much appreciated...I don't like these little problems beating me!

Ricardo this is not solution for you. Using S-Video cable can be used for video signal transfer only.
Do you want to have picture without sound. I don't think so.
I have made similar experiments and I have copied old VHS cassettes to my old Qosmio G30. Later I have converted recorded material and created DVDs.
My Qosmio G30 has antenna in port and I have connected my VHS recorder to this port and transferred video and audio signal. I have for example started video on VHS recorder and started Windows media centre and scanned all channels and on channel 33 I saw my recorded material that comes from connected VHS recorder.
I have tested recording with Qosmioplayer and MCE. Using both options I was able to use record option and have video material on HDD.
I am sure the same can be done with G40. Check it out.

Video Chatting and Internet Sharing at the same time.

Does anyone know why video chat communication cannot be established while internet sharing, or how to remedy this problem by (what I imagine would be) opening/closing/redirecting a few ports?
More specifically:
I share my ethernet connection through my airport connection to my iphone with the ip host/client scheme of 10.10.0.1/10.10.0.2.
If I don't turn internet sharing off, a video chat connection cannot be established.

Would you want any phone call due to come to you to go to both your landline and your mobile/cell phone particularly if you did not have both together ?
It is mostly about the specific needs of iChat needing to be able to place the computer in a specific place compared to the rest of the Internet.
If you have your Cell phone divert to your Home phone or vice versa how do you know it has also not been answered ?
More to the point how do you know that someone answering a call you have made to them has not been answered by someone else ?
In practice you know only one phone can be answered because of the mechanisms put in place that allows you to make the link between cell and Landline.
It is same for the process used to connect iChat to an iChat Buddy. It makes sure the Network has been set up correctly and is secure.
It is less about making two connections to the internet in the belief it will be twice as fast.
(Check a Download in a web Browser and see if it is really any faster with two connections or if Web Browsing is any faster.)
6:20 PM Friday; February 6, 2009

Firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result.

firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result. Why do I have no sound. Computer plays I-tunes and all other sounds, just no web browser sounds.

Glad you seem to have sorted things out.
The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems.

I have two iphones, personal and work. Same icloud account. Now i get my imessages on both phones. I dont want that. How do I stop it?

I have two iPhones, personal and work. Same iCloud account. I updated my work phone last night. Now I get my imessages on both phones. Incoming and outgoing. No matter which phone I use.
Help, I do not need my work phone to have my personal text.

Settings>Messages>Send & Receive...edit on each phone here.

Personal and room video equipments in same videoconference

Similar Messages

Maybe you are looking for