Personal Data changes were not saved

Hi,
From the Personal Profile, I am able to edit and save data in all the sections but not for the Personal Data. Once after clicking on the Edit button from the Personal Data as shown below:
We are getting below Edit Personal Data screen. Upon clicking on Save we are getting the error:
Error:
Here's the dump from st22:
Category               ABAP Programming Error
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_HRPA_INVALID_PARAMETER
ABAP Program           CL_HRPAD_IL===================CP
Application Component  PA-ESS-XX-WDA
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_HRPA_INVALID_PARAMETER', was notcaught in procedure "MODIFY_LINE_RECORDS"          (METHOD)", nor was it propagated by a RAISING clause.
     Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated.
     The reason for the exception is:
     Invalid parameter SECONDARY_RECORD-PSKEY, value 0000099132589999123119860415000
After running the report RPUPAV00, I get the below message:
Regeneration of Additional ITs for Views
2 ERP016X"Start of Subsequent IT Generation in Client:" "120" " " " "
2 ERP016X"    New Personnel Number:" "00000991" " " " "
2 ERP016 "*" "00000991" "No Conversion Routines for CGr:" "24"
2 ERP016X"Statistics" " " " " " "
2 ERP016 "No Database Conversion Occurred" " " " " " "
This is this happening for country Colombia
I have checked the sap note: 1815863, I found the table V_T582V & V_T582W. as per sapnote: 1542198, i maintained tcode-GENIL_MODEL_BROWSER.
Thanks
Regards

For this table :
If I delete the entries for the following tables , work fine.
However this not is the solution.
Other suggestions?
Thanks

Similar Messages

  • Modified CR2 files in ACR and changes were not saved

    I have a directory with 1400 CR2 files in it. I have a stack of picks that I am working with. I went through and for 6 hours adjusted all the images by opening them in Camera Raw and making changes to White Balance, Fill light, etc... When I was done, i clicked done to save the changes to the file (Like I've done many many times before).However most of the modifications were never saved. All the files have sidecar xmp files, but most show original files without modification. I edited approximately 580 images this way and probably 20% kept the changes and the rest "seem" to have reverted back to their original "As Shot" state. Any ideas what happened? Is this reversible or did I just waste my life?

    Look at the folder in windows Explorer.   What are the time stamps on  the xmp files?  Do they appear to be "current" -- that is, timestamps approximately when you performed the ACR edits and pressed Done?  Or do 70 to 80% of them have earlier time stamps?  Current time stamps would suggest that xmp files are being written or updated, possibly omitting some ACR edit data; earlier time stamps suggest that the xmp files were not updated by ACR-Done.
    Sequence the xmp files by Date Modified.   Do the xmp file time stamps appear to be in time groups?  If you clicked Done after editing 20-25 images in ACR, you would expect to see 20-25 xmp files with the same file modified date and time.  If you see this, it suggests that entire groups of edits were saved; but some groups of edits that should be saved by a Done from ACR may not have been saved to xmp.  If you see groups of substantially fewer than your usualy edit Done sets of 20-25, it suggests that only some xmp files were written.
    Since it looks like that you will need to go back and redo the edits to a good many of your 580 images, you might try looking at the xmp files after each ACR Done.  Sequence the xmp files by Date Modified.  Is the number of file modified timestamps with the 'now' date and time the same as the number of files you just edited in ACR?
    In Bridge, do the just-performed edits appear in the thumbnails?  Look a the ACR values in the metadata for each of the just-edited images.  Do they show the values you just edited?  (Be sure that you have checked on Camera Raw metadata in Bridge preferences.)

  • Microsoft Outlook 2010 The delegates settings were not saved correctly. Cannot activate Send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object.

    I am trying to assign delegation to a user and I receive the following message.
    The delegates settings were not saved correctly.  Cannot activate Send-on-behalf-of list.  You do not have sufficient permission to perform this operation on this object.
    We are using 2010 for the server and client.  There are only specific mailboxes that this is happening for after being migrated from Lotus Notes.  The user can use their mailfile fine however it is just the delegation that appears corrupted somehow. 
    I'm not sure how to fix this.  I have checked the access through the security tab in ad and that looks fine.
    Any help would be appreciated.

    I did some more digging and I solved it.
    This would be the solution:
    In Active Directory Users and Computers
    -Click on VIEW
    -Click on ADVANCE FEATURES  (this is important otherwise you won't see
    the complete list in the next steps)
    -Click on the USERS container
    -Find the problem user's account
    -Right mouse the account and click on PROPERTIES
    -Click on the SECURITY tab
    -In the top box, click on the SELF account
    -In the bottom portion of the screen make sure the READ PERSONAL
    INFORMATION  & WRITE PERSONAL INFORMATION  should both be checked for
    ALLOW
    If you can compare the permissions for 'SELF' with another user you probably should set them accordingly to be safe. I noticed that for the user where setting delegates (SOB) did
    not work, more than those 2 permissions were missing.
    Good luck!
    David

  • Outlook error "The Delegate settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed"

    Hi,
    Re: "The Delegate settings were not saved correctly. cannot activate send-on-behalf-of list.  The operation failed" 
    I have a client who is getting the above error when attempting to change delegate permissions in Outlook 2010.
    She is also getting this error when she tries to remove a delegate.
    I have tried recreating her mail profile.
    I have also tried kb2593557. The auto fix didn't work at all and the registry fix only removes the error message and not the problem. This client would like to be able to edit her delegate permissions.
    She is on Exchange 2010
    Any assistance would be appreciated.

    The article you provided is not related to the error message that the user is getting it.
    Can you please provide better solution? I know this answer and this post is old but I am having same issue.
    The error message is only (The Delegates settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed) I was not able to attach screen shot.

  • Adobe acrobat has recovered one or more documents that were not saved properly

    Hello,
    I am getting the following error and cant seem to fins anything about it anywhere
    "Adobe acrobat has recovered one or more documents that were not saved properly before Acrobat was shut down click yes to open the recovered document click no your changes will be lost. "
    This comes up numerous times a day.  Does anyone have any idea to what it might be related to?  Some seting?  Looking for a direction to troubleshoot.
    Running Acrobat X standard, fully updated, Windows 7.

    Same problem.
    Clicking yes or no does not stop the pop up to come over and over again.
    Copied the file "unsaved", renamed it and deleted the "unsaved" one.
    No success, pop up with message Adobe acrobat has recovered one or more documents that were not saved properly continues
    It is very disturbing when working with tough deadlines
    Using Acrobat Pro 9.5.5 (updated)
    Please help

  • Error while TRANSFER System is trying to write data that were not locked

    Hi Everybody,
          I am encountering a Error Msg when i try to TRANSFER plan values .The Error masg is
    "System is trying to write data that were not locked".
    I never got this msg before. I checked my Planning query, it looks fine. I have the cells in Blue but couldn't change values or create new records.
    I have the locks set up in RSPLSE too.
    I am on BI-7 IP SP12.
    regards,
    Roger

    Hi ,
      Below is the reply i got from SAP this morning... i have asked my basis team to apply the note.. will update after i test my layout.
    *************Reply from SAP *********************
    I was able to replicate the issue in your system.
    Please implement the note 1153756 in your system.
    1153756 : Template: BI 7.0 (SP18) / BI 7.1 SPS06
    This note will solve your issue.
    If the issue still persists then , please try using a blank value for
    RSADMIN parameter RSPLS_DATA_CHECK_WRITE = X.
    This parameter triggers some 'extra' checks.
    Using a blank value should avoid these error message which you are
    getting.
    regards,
    roger

  • Error while configuring GCM: The push settings were not saved. Error 400

    Hi,
    While configuring push settings for google cloud messaging in azure mobile services, i entered the server key received from google developer console.
    When i try to save the entry, i get the message The push settings were not saved <mobile-serversices-site>: Error 400
    I have regenerated the key multiple times but of no use.
    Am I missing something? I am a paid subscriber of Azure
    Thanks, Laks.

    Sorry for the late reply. Sometimes there are transient errors in the portal that affect whether or not the settings can be saved. Also, you should make sure that you have an associated notification hub (which will show up in your push settings). If there
    is no associated hub, you will always get errors when trying to configure.

  • Upon startup Firefox says "Proxy is refusing connections." When I select "Auto-Detect Proxy" from Advanced settings and solve problem, changes are not saved and upon next startup I must select again...!

    Firefox 4 was working fine. Then one day, when I started up Firefox, it says "Proxy is refusing connections." I solved this by selecting "Auto-Detect Proxy" from Advanced network settings, but my changes are not saved and upon every start-up I must select it again! (I even completely removed my webroot antivirus protection, as it as hindering many proxy related programs, but this seems to not be the source of the problem)

    You can find the connection settings in Tools > Options > Advanced : Network : Connection
    If you do not need to use a proxy to connect to internet then select "No Proxy"
    See "Firefox connection settings":
    * https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    See also:
    *http://kb.mozillazine.org/Preferences_not_saved

  • UI Shell :  Changes are not saved. If you leave this page

    Hi,
    My JDeveloper version is 11.1.1.6.0
    I have on VO having all transient attributes. The vo having dependent LOV's . When i am not not selecting the value from lov and trying to close the UI Shlll it is not showing warning message.
    When i am changing the lov then trying to close the UI shelll then it is shows the "Changes are not saved..." warning message. I want to skip the warning message . How to do that
    Thanks
    Deepak

    go to <af:document id="d1" > tag and then property inspector and the n make uncommittedDataWarning to off.
    Thanks
    Pratee.

  • Web template changes are not saved.

    Hello Experts,
    I making a small change to an existing Web Template namely changing the tab page 1 to tab page 2 and  vice versa.
    I could see the message Changes are saved but at the end web template is same like as it was.
    Any idea why changes are not being saved and how to over come this will be of great help.
    Thanks in anticipation.
    Best Regards.

    Hi.
    The changes are not saved in WAD or has not affect when executing the WAD ?
    Regards.

  • Changes are not saved

    After making changes to my iWeb site, I have re-published as well as saved all to .mac. However, the changes are not saved. How can I save the changes?

    KHCrowley,
    Welcome to Apple's discussions.
    Try clearing your browser cache, and then take another look. The changes are most likely there.
    Mark

  • Clock and date settings are not saved

    clock and date settings are not saved in lion

    I'd give AppleCare a call.
    AppleCare Support Phone Number: 1-800-275-2273
    open 6am to 6pm Pacific Time
    International Technical Support Numbers
    http://www.apple.com/support/contact/phone_contacts.html
    You may want to look under date & time and set the clock from the internet.  At least you will have the correct time after a while.
    RObert

  • How to extract the data from the chart. Data were not saved

    Hi everyone. Beginners question, but could not find an answer to it
    How can I get the numerical data from the chart. Chart is already on the screen and data vere not saved into file during VI run. All I have - just chart, but I need numbers       
    Thanks
    Message Edited by olka on 07-18-2007 09:41 AM

    You can still do it, the process just changes a bit...
    Copy the control to a new VI as before, and change it into a control.
    Create the diagram shown in the attached screen shot.
    Run the new VI. You will get two arrays: one of x-axis values and one of y-axis values.
    Mike...
    Message Edited by mikeporter on 07-18-2007 12:21 PM
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
    Attachments:
    extracting xy data.JPG ‏5 KB

  • Visio 2010 - Shape Data Fields Are Not Saving

    I am having a problem with a number of shape data fields which are not saving data that has been entered into it, whether by entering it through the "shape data" or "define shape data" dialog boxes, or by editing the "shape
    sheet". 
    All data fields appear to save normally while file is open, it remains as entered.  However, when file is closed and later reopened select data fields do not retaining data correctly.  Some retain nothing (null), or revert back to a "default"
    value, see below for a couple examples:
    Rack Units:  Want to enter data as 1U, 2U, etc. ... in some cases it will save it as entered while in other cases it reverts to "1 RU", "2U", etc.
    Room:  Enter the data as I want it stored, most of the time it appears to come back empty, there are some shapes which will retain as entered.
    Comments:  Fails to retain any data
    I have looked at a number of reasons to explain why, whether the problems occur with stencils is supplied by Microsoft, a vendor, or were custom created.   Looked into whether it might have to do with a particular vendor's stencils/drawings
    but I have a number of Cisco drawings where some save those fields as entered while others do not.  I believe it could be a setting within the stencil preventing it from saving the data as entered, enabled in some cases and not in others.
    I have checked "Protection" under the "Developer" tab, but nothing appears to be set to prevent editing/storing data entered. 
    Is there some setting(s) or field(s) somewhere that I can look at to allow this data to be saved as entered?
    Is there a GLOBAL setting that can be set once within a file?
    Thank you in advance for your time to assist me in fixing these problems. Have a great day!
    MJ_NWE
    MJ

    >Can I build logic so that they can't fill in a field unless the previous field has been filled in?
    It's theoretically possible to do this (e.g. each field has an action
    of removing read-only on the next). It's considered extremely bad form
    design, because people don't always fill in fields in the order
    specified. If you watch people with a form they fill in their name,
    address, other easy stuff; then they go back for the harder stuff.
    They may want to save a form because one piece of information needs
    research.
    What you might like to consider is a large splash "FORM INCOMPLETE" in
    Red or whatever, which vanishes when all the fields are completed.
    Aandi Inston

  • Personal data change in PORTAL (PA30) - need to send mail notification

    Hi,
    When there is any change in personal data on PORTAL need to send a mail notification to the respective agents. I was able to design the workflow in such a way that , whenever there is any change in the personal data (Ex. Marital status) it trigger an event and workflow starts, inturn it send mail to external system and sap Userid.
    The question is ?
    1. If the personal data is changed from the portal , does it trigger the same event in the backend ? does 
        it  start my workflow?
    Thanks!
    Richard A

    Hello Richard,
    In my opinion same event is triggered. You can check it in transaction SWEL.
    Please have a look at the following threads more more detailed information,
    Workflow is not trigerred from the portal
    /thread/113450 [original link is broken]
    /people/alan.rickayzen/blog/2003/10/13/workflow-in-the-enterprise-portal
    Best regards,
    Abir.

Maybe you are looking for