Personal Data iview can be changed

ESS-PersonalInformation--PersonalData-Webdynpro based iview
I have a scenario that i need Personal Data only for display purpose.There should not be Edit button inorder to edit.
Can we make changes to the Personal Data iview

Personal Data uses SAP transaction PZ13 behind it. You could make a Z copy of the SAP Program (function group EHF5) and remove the 'change' button from screen 100. Then create a new iview that references this custom program/transaction.
Adrian

Similar Messages

Changes to the ESS Personal Data iview

Hi There
With regard to the 'Personal Data' iview on ESS.
I have a scenario where fields marked as REQUIRED are DISABLED.
How do i enable them ?
When trying to change the field configuration by previewing the Personal Data iview and then doing 'control + right click' on the relevant disabled field the changes DO NOT take effect.
When changing an enabled field the change take effect.
Any ideas as to what may be causing this ?
Any advice with regard to resolving this issue will be appreciated.

Hi,
The ESS/MSS fields can be enabled/disabled from spro settings at the backend.
Please check with HR consultant to see the status of that field.
The pathmay be:
>Personnel Management > personnel administration > own data > personal data
Thanks
Muthukumar

MSS General Information - Personal Data Iview

Hi,
On Mss> Team > General Information, We want to add to Personal Data Iview more fields, for example secondary address, We dont have NWDI, so I'm looking for some table to customize an add the parameters....
Any help?
Thanks in advanced!

Unfortunately there is no table for this to customise, You can try peronalisation
Without NWDI this cannot be achieved.
http://help.sap.com/saphelp_erp2005/helpdata/en/ee/63ef41925b2135e10000000a1550b0/frameset.htm

Problem with displaying a standard field in Personal Data iView

Hi,
I'm trying to display the field 'Nickname' from infotype 0002 in the Personal Data iView. I searched SDN and SAP Help and all of the replies/documentation refers to "Maintain V_T588MFPROPC". I want to display this field in the Edit and the Review and Save screens.
The steps given in this forum seem straightforward but in reality it's a nightmare. I've spent days and nights debugging and testing, but still couldn't solve this. I can see from my debugging that the field is filled in with the appropriate values in all the internal tables/structures but it is not shown at all in the iView. What I got from maintaining V_T588MFPROPC is just the field's attributes.
How do I actually display the field in the Review and Save screens of the Personal Data iView? Does this involving modification to the iView Java program? Can anyone help?
Thanks in advance.

V_T588MFPROPC is the table where you add the technical field name for the country version you are using
like for USA it is 10
Now the same field if supported should appear in all screens, it if it not then you would need java modification
of the ess component
http://wiki.sdn.sap.com/wiki/display/profile/ESSPersonalInformationUIenhancementwithoutmodification
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?spaceKey=profile&title=ESSPersonalInformationUIenhancementwithoutmodification&decorator=printable

I changed companies and had icloud with my old company - now i want to just use my personal id and can't change any icloud info to match my personal ipad id - i can't delete the icloud without the old company id and password which is not available to me

i changed companies and had icloud with my old company - now i want to just use my personal id and can't change any icloud info to match my personal ipad id - i can't delete the icloud without the old company id and password which is not available to me - it probably doesn't even exist anymore!
Because I can't delete the icloud account, I keep getting view terms to accept and it wants to go to the old company account. I can't do anything to get rid of this - when I try to delete the icloud it wants me to delete find my ipad and asks for the old co. id and password - it's a vicious circle and i just want to get rid of it and start fresh with my regular personal email id and password!!! Help!

You will need that old Apple ID and password, which does indeed still exist. Apple doesn't delete Apple IDs, though if this ID was in the control of your company they may have changed the password. If so, you will need your former company to log into the iCloud account using that ID and password and erase the iPad or remove it from iCloud:
http://support.apple.com/kb/TS4515?viewlocale=en_US
Until that's done you cannot change those settings, and if you try to restore the iPad will have it locked with Activation Lock and thereafter be unusable.
Regars.

MSS Personal data iview

HI Experts,
I have to add phone field in personal data iview.
I am using EP7.0 Portal ,and this is a webdynrpo based iview,I wanted to know whether there is any hidden field for phone or we need to add this field or is there any configuration required from backend.
Thanks in advance.
Thanks,
Vinay

Hi,
If this field already manitained at r3 side, you need to get that field from R3 as same what the other fileds you are getting. Nothing is required for this only thing you have to Map this field and you have to bind this field to your view.

Hide or remove delete button - ESS personal data iView

Hi, regarding for example ESS(50.4) personal data overview iView.
How to hide or remove delete button in the personal data overview iView screen(I know that this can be done on the ITS server side (web studio), but I want to do this in R3)
/Best Regards
Patrick

Achim was right on. Edit/Change the Internet Service in R/3. A few things to consider though....
(1) if using the original service, you may want to create a copy of theme 99 into your own theme (any number will do...99 is just the default theme). If doing so, be sure to change the service's service file (yeh, I always loved that about SAP's naming) to point the ~theme paramter to your new theme.
or
(2) Copy the entire service into your own "Z" service. Then modify the templates as you wish. You will need to point the iView to this "Z" service too.
Also, it is best to do it via SE80 vs. file level because then it will be part of a transport and follow the correct path through the landscape.
Now, if you really want to go back to R/3....find the function module or program the transaction code for your service actually calls, make a "Z" version of it, modify it, create your own "Z" t-code to call it, and THEN modify the internet service's service file (either the original SAP one or a custom version) to call your new "Z" t-code. Lot of work...yes, I know....but that's the way it's done if you gotta get back down to the ABAP level.
Hope this helps!
Message was edited by: Christopher Solomon

Bringing additional field in "Personal Data" iView

Hi All,
This problem might have been discussed on SDN, but I could not locate any concrete solution so posting new question.
We are implementing ESS for multiple countries including US, UK , Japan. Language is english only.
For ESS > Personal Data application, we would like to have Suffix field avaialble on the iView.
There is a field for Suffix in Infotype 0002, but there is no field on the iView.
Questions are :
(1) How this can be brought in the iView?
(2) Can this be done using any configuration or need customization using NWDI ?
(3) Does a single process or config will make it available in iViews of all countries?
Thanking in anticipation.
Regards,
Rajesh

Hi Rajesh
Each ESS service is country specific therefore it has to be customizied by country
Regarding adding fields you would normally do this by "Inserting a child" into the relevant views transparent container
- modifying by NWDS is only part of the customization - you still need to ensure the model recognises the
field and passes values to and from the Portal with the correct business logic
I also found the following which may be of interest -->
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?spaceKey=profile&title=ESSPersonalInformationUIenhancementwithoutmodification&decorator=printable
Best wishes
Stuart

Personal data iView error....Anyone able to help?

Hi All,
I have a problem with my EP. I have create an iViews and link it to employee bank information (PZ03) which I publish this thru SE80 under Internet service. On the R/3 side, if I login as the employee, by typing /n then press enter and I type PZ03. I am able to see the screen. The problem is when I wanted to display the personal data (PZ13); I could not publish it in SE80 under Internet service. It gives me an error message that the object does not exist. However I am able to view the screen if I log in as an employee in R/3 (same with what I did for PZ03).
On the EP side, I am not able to view that personal data (PZ13) iView. It gives me some error message which listed below. It is working fine in my development EP. Is there anything that I need to re-publish or any service that I need to activate?
Error
The page just hang there with an hour glass while on the bottom left corner of the browser, it show done with some warning. When I double click on the warning it gives me error which I listed some below.
Line:572
Char: 1
Error: Self.myOnloadhdIf2 is null or not an object
Code: 0
URL: http://sapepprd.bimbdev.com.my/scripts/wgate/pz13/!?client=010&language=en&accessbility=0&DesignBaseUrl=http%3A%2F%2Fsapepprd.bimbdev.com.my%3A50400%2Firj%2Fportalapps%2Fcom.sap.portal.design.portaldesigndata%2Fthemes%2Fits&~design=sap_tradeshow
Error 2
Line:5116
Char: 1
Error: its_tablecontrolObject is undefined
Code: 0
URL: http://sapepprd.bimbdev.com.my/scripts/wgate/pz1354ee2f84/~fIN0YXRIPTM4NDCUMDAxLiAyLiAy===?
subframe=1&use_session_protocol=1&webguiuserareawidth=766&webguiuserareaheight=372
Anyone know what is the problem or the solution?
Thanks you..
Regards,
Bryan

Although I haven't used XSQL specifically with MySQL database, your issue is clearly related to some dependence on Oracle JDBC drivers. The first place to look - did you change the <connectiondefs> section of the XSQLConfig.xml file to include appropriate connection parameters for your database, including a class name of the MySQL JDBC driver? Another thing to try - switch to Tomcat's DataSource implementation - for instructions see comments in XSQLConfig.xml file. You'll need to use oracle.xml.xsql.XSQLDatasourceConnectionManager factory instead of the default one. Note that some advanced features may not be supported with DataSource-based DB connections, but those seem to be fairly obscure.
Hope this helps,
-M-

I have five iPads, four for my classroom and one that is personal. How can I change my Apple ID on the personal iPad and still keep the apps? Thank you!

I have five ipad ii products. Four of them I use in my classroom and one is for personal use. How can I change my apple ID on my personal iPad and keep all of the apps (i.e. Kindle). I do not want it connected to my school iPads.

All app purchases are permanently tied to their Apple ID. You will have to delete and repurchase the apps with a new ID. I would recommend wiping that iPad and setting it up with another ID.
~Lyssa

PA30 - Changing personal data of one employee changes data to others also

Hello,
I have a strange problem. When I am changing the personal data of an employee in PA30 this change is affecting several employees also. This means at the moment that I have people that have connected data like the same name and so on...
Could someone give me a hint what I could have done wrong?
I am using SAP_HR Release 600 with Level 28
Thx, Van

I am sorry. The problem was the thing between chair and display. I changed the data in PA30 and there was something wrong with it.
cu, Van

Date & Time: Can't Change Year on a User Profile

I have multiple profiles on my Mac. One of the profiles has a year of "2556," even though I have it set to sync automatically via time.apple.com. Now when I log into a different user profile, the year is current "2015." I've unchecked to "set date and time automatically" and tried to change it manually on the user profile in question, but unable to change it.
Any suggestions on how to force a change on a profile?

Good link. The Language & Region was a good place to look. Attempting to restore defaults was not an option. However the Region was pointing to Africa. Once I changed that, everything else fell in place.
Thanks!

Mail 3.1 - all older e-mails has the wrong date - how can i change this?

all e-mails in my Mail 3.1 that are older than May 23 2006 has not got the right date any more. Most has the date of May 23 2006 but some has older dates again. Anyway there is something wrong and I cannot find amongst my old e-mails anymore, as they as not sorted by date because they all have the same date now. Has anyone any ideas how to change this? In my IMAP account the old mails all have the correct dates still...
thanks

Unfortunately this has no affect on the problem. I have in the mean time also spoken to the Apple Support gyes. Even they couldn’t help me so fare….any one?

How to show email id in personal Data of ESS

Hi All,
I have a scenario in which i have to show the email id mail in personal data iview of the personal information .
Iam using NWDI . I have checked the personal data DC and found that the RFCs being called in the application are related to 0002 infotype. I didnt find any field for email id in 0002 infotype. In my case the email id has to be picked from su01 user data.
Please help me to proceed further.
Thanks,

Hi,
I think there ia already an Iview you can use. Check Change own data
http://help.sap.com/erp2005_ehp_04/helpdata/en/34/1100414a0e40a5ae68d5aeacc30165/frameset.htm
This picks email from from su01/su03
This is there in ESS version 1.0 also. You can add remove lot of fileds using the infoset in SPRO setting in
Personnel Management > Employee Self-Service > Service-Specific Settings > Whou2019s Who.
Srini

In Mail can I change my "To" field to From or sender

In Mail my inbox shows 3 fields "To, Subject, Date Recieved" Can I change the "to" field to from or sender. I know who the mail is to, it's always to me after all it's my mail I'm checking. I would like to know the sender so I can better decide which mail to open and read. Sometimes I'm looking for a response from a paticular person.

Hi Ubettergetit: Actually it is quite easy to get rid of that little annoyance. With mail open, Right (Control) Click on one one of the headings in Mail. (To, From, Subject....). This will bring up a menu that allows you to select which headings you would like to see, change it as required.
Enjoy
Stedman

Personal Data iview can be changed

Similar Messages

Maybe you are looking for