Personal Domains and the index file

Ok, I have a number of sites that I use through .mac, and now I have ONE of my sites that I want to use on a personal domain. When I set it to publish to a folder and put the address in, it will only do the FIRST of my sites, and it will only do it as a subdirectory, and not create it as the index file for the site.
Help!
Todd
PS Yes the CNAME has been changed for the site, so it is talking fine with iWeb.

When I set it to publish to a folder and put the address in,
The address is only to make sure your RSS feed is correct.
it will only do the FIRST of my sites, and it will only do it as a subdirectory, and not create it as the index file for the site.
I'm not sure what you think should happen, but iWeb normally publishes all your sites, each in its own folder with the same name as the site has inside the iWeb app. It will also publish one index.html file alongside those folders, and this goes with the topmost site inside iWeb.
Before publishing to a folder, make sure the site you intend to upload via ftp is topmost in the iWeb site organizer. After publishing, upload the index.html file plus the folder which has the name of that site.

Similar Messages

I have been working on the same numbers file for the past few weeks. The last time I opened it was 1 week ago. Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.

I have been working on the same numbers file for the past few weeks. The last time I opened it was 1 week ago. Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.

Hi Tracie,
I upgraded to Maverick OS X 10.9.5, numbers spreadsheet is saved. Upon re-opening, it appears to be frozen, a warning "file is invalid as index.xml file is missing". I checked, and the file is not "locked". This appears to occur only with using the new numbers app. When I open previous spreadsheets from old iWorks, no such problem occurs.
How did you resolve your problem?
Would appreciate any help here.
Thanks,
Deehay

Getting Error The trust relationship between the primary domain and the trusted domain failed in SharePoint 2010

Hi,
SharePoint 2010 Backup has been taken from production and restored through Semantic Tool in one of the server.The wepapplication of which the backup was taken is working fine.
But the problem is that the SharePoint is not working correctly.We cannot create any new webapplication ,cannot navigate to the ServiceApplications.aspx page it shows error.Even the Search and UserProfile Services of the existing Web Application is not working.Checking
the SharePoint Logs I found out the below exception
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4)        0x2D24 SharePoint Foundation         Database
8u1d High    Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4)        0x2D24 SharePoint Foundation         Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4)        0x12AC SharePoint Foundation         Database
8u1d High    Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4)        0x12AC SharePoint Foundation         Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:55.54 mssearch.exe (0x0864)                   0x2B24 SharePoint Server Search      Propagation Manager
fo2s Medium [3b3-c-0 An] aborting all propagation tasks and propagation-owned transactions after waiting 300 seconds (0 indexes) [indexpropagator.cxx:1607] d:\office\source\search\native\ytrip\tripoli\propagation\indexpropagator.cxx
11/30/2011 12:14:55.99 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
75dz High    The SPPersistedObject with
Name User Profile Service Application, Id 9577a6aa-33ec-498e-b198-56651b53bf27, Parent 13e1ef7d-40c2-4bcb-906c-a080866ca9bd failed to initialize with the following error: System.SystemException: The trust relationship between the primary domain and the trusted
domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids, Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection
sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()
at Microsoft.SharePoint.Administration.SPAcl`1.Add(String princip...
11/30/2011 12:14:55.99* OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
75dz High    ...alName, String displayName, Byte[] securityIdentifier, T grantRightsMask, T denyRightsMask)     at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider
persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state)
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
8xqx High    Exception in RefreshCache. Exception message :The trust relationship between the primary domain and the trusted domain failed.
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Timer
2n2p Monitorable The following error occured while trying to initialize the timer: System.SystemException: The trust relationship between the primary domain and the trusted domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection
sourceSids, Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()     at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, Byte[] securityIdentifier, T grantRightsMask,
T denyRightsMask)     at Microsoft.SharePoint.Administrati...
11/30/2011 12:14:56.00* OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Timer
2n2p Monitorable ...on.SPAcl`1..ctor(String persistedAcl)     at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()
at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(Guid
id, Guid parentId, Guid type, String name, SPObjectStatus status, Byte[] versionBuffer, String xml)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(SqlDataReader dr)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.RefreshCache(Int64
currentVe...
Please guide me on the above issue ,this will be of great help
Thanks.

I have same error. Verified for trust , ports , cleaned up cache.. nothing has helped.
The problem is caused by User profile Synch Service:
UserProfileProperty_WCFLogging :: ProfilePropertyService.GetProfileProperties Exception: System.SystemException:
The trust relationship between the primary domain and the trusted domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids,
Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()     at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, SPIdentifierType identifierType, Byte[]
identifier, T grantRightsMask, T denyRigh...
08/23/2014 13:00:20.96*        w3wp.exe (0x2204)
        0x293C        SharePoint Portal Server              User Profiles
        eh0u        Unexpected        ...tsMask)     at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.Office.Server.Administration.UserProfileApplication.get_SerializedAdministratorAcl()     at Microsoft.Office.Server.Administration.UserProfileApplication.GetProperties()     at Microsoft.Office.Server.UserProfiles.ProfilePropertyService.GetProfileProperties()
Please let me know if you any solution found for this?
Regards,
Kunal

Personal Domain and MobileMe

Once I changed my settings to my Personal Domain, I could no longer post my second MobileMe site. Can I use a Personal Domain and have more than one MobileMe site?

This is incorrect. You can only use the personal domain name option with CNAME forwarding ONCE for every MobileMe account. If you want other sites, then you can publish as many as you want and they will have the url http://web.me.com/username/sitename. If you want to use domain names with these sites, then you can, but you have to use ordinary masked or unmasked web forwarding so that your domain is forwarded to web.me.com/username/sitename.
Also, why do you persist in placing links that don't work? Try clicking on your WordPress link and it comes up every time with server not found.

How to Publish to a personal domain AND .Mac?

I had a working iWeb site published to web.mac and it working fine. I added a new site in iWeb08 and set up a personal domain. When I selected the new site and published, BOTH my old site and the new one published to my personal domain. How do I tell iWeb08 to publish one site to a personal domain and another site to .Mac (.Me)?

This post is a little confusing. Do you have two sites hosted at MMe or not?
Do you mean that you used to host your business site and MMe and have now switched to uploading directly to your web host using ftp? If you have, then you can of course delete this site from your iDisk/MMe account, because if you have uploaded directly, then MMe has nothing to do with your domain name any more.
If you have not done this and you are hosting both your sites on your MMe account via either CNAME or web forwarding, then no, you can't delete that site because if you do, there is nowhere to forward to.
Password protection will not affect any other sites that you have. Just go into iWeb and set this up and then re-publish and it will just affect that site that you set it up for. Nothing else.

How about adding a meta tag to the index file.....

This is another way to get verified with Google and other search engines. Does anyone know a way that you could add a meta tag to the index file generated by iweb??
Thanks for any help....Matt
http://www.want2takecredit.com

I'm glad it worked. Nevertheless you might think of uploading an html file as well. The index.html sometimes gets overwritten by iweb, thus the meta-tag would disappear and you would have to do it again. The html file instead stays where it is.
Here's how to procede:
When they will ask you to verify that it really is your website. “Choose verification method” select “Upload an HTML file” and now you will have to build that verification file (here’s a How-to by Roddy).
1. Go to your applications folder and launch Text Edit.
2. Don't put anything on the blank page.
3. Select File/Save As.
4. In the popup window "Save As" box enter your Google number (something like google05a23d347cXXXXXX )
5. In the "Where" box select desktop.
6. In "File Format" menu select HTML.
7. Click "Save".
8. A file will appear on your desktop called google05a23d347cXXXXXX.html
9. This is what you upload to your server or iDisk.
Upload that file to your main folder on your server so that it will be http://www.yoururl.com/google05a23d347cXXXXXX.html (not in the subfolder of the Sites folder named with the title of your site...*).
For .Mac go to the Finder menu and select Go/iDisk/My iDisk/ or hit SchiftCommand(Apple)i and then go to /Web/Sites/. Drop your file into the "Sites" folder
Entering: http://web.mac.com/username/google05a23d347cXXXXXX.html in your browser should bring up this file. If it doesn’t you placed the file in the wrong location.
Entering: http://yourbaseurl.com/google05a23d347cXXXXXX.html in your browser should bring up this file. If it doesn’t you placed the file in the wrong location.
Regards,
Cédric
+I just noticed your other posts on the forum and that you got it solved I'll leave the explanation for other people wondering and stumbling over the thread+

I have two excel files I cannot open or delete from my desktop. One is titled 6ACAD200 and the other file is titled 8D73A700. How can I get these off of my computer?

I have two excel files I cannot open or delete from my desktop. One is titled 6ACAD200 and the other file is titled 8D73A700. How can I get these off of my computer?

From the names I'd guess they are temporary files. If excel is running, quit and try again. If they still won't move or delete reboot. If they still won't move or delete...kill a chicken at midnight under an oak tree?

I converted aif files to mp3 files in I tunes so I could put them on a flash drive. Now when I transfer an album to the flash drive I get both the aif files and the mp3 files in the flash drive. How do I get the iTunes to only copy the smaller file?

I converted aif files to mp3 files in iTunes so I could put them on a flash drive. Now when I transfer an album to the flash drive I get both the aif files and the mp3 files on the flash drive. How do I get the iTunes to only copy the smaller file?

My suggestion to use the smart playlist was more along the lines of making one list with rules to show everything in your library as long as it was kind "mpeg" (= mp3).
Smart playlists cannot be edited manually, only by changing the rules. You can use them as the basis for another smart playlist though.
There is added overhead to using smart playlists, so don't go overboard.

ICal failing to run applescripts: The 'Open' button does not change to 'Run', and the script file is opened but not executed on alert.

iCal failing to run applescripts: The 'Open' button does not change to 'Run', and the script file is opened but not executed.

Calendar (not called iCal anymore) does not include that capability any longer, apparently. What you have to do now is go to Automator and create a Calendar Alert action. You can add a Run AppleScript object to the action and paste in your script there, then when you save it, it will become available as a choice in the alert menu in Calendar.

In Indesign CS6 I export an artboard to TIFF with the sdk's funtion SnapshotUtilsEx- ExportImageToTIFF(iStream) and, the resulting file is one pixel too large in the X, leaving a transparent strip on one edge. Any idea if there is a bug in the sdk?

In Indesign CS6 I export an artboard to TIFF with the sdk's funtion SnapshotUtilsEx->ExportImageToTIFF(iStream) and, the resulting file is one pixel too large in the X, leaving a transparent strip on one edge. Any idea if there is a bug in the sdk?

An easy example to prove this bug of Indesing CS6: I create a psd with Photoshop CS6, with width 505 pixels, height 317 pixels and a resolution of 300 pixels per inch. This psd is placed on a page in InDesign CS6. Then I try to export it as a tiff with the functions:
fSnapshotUtilsEx->Draw(flags,fullResolutionGraphics,greekBelowPtSize,enableAntiAliasing,tr ansparencyQuality,abortCheck,pVPAttrMap,bDrawNonPrintingObjects);
and
SnapshotUtilsEx-> ExportImageToTIFF (iStream)
The resulting tiff has a width of 506 pixels (one pixel more in width). It will happen the same if we start with a width of 507 pixels, etc.
This error does not occur with Indesign CS5, nor Indesing CC.

I just updated to 5.7 and the exported files are blurry. I compared the ones I exported before the change and they are fine. I have not change any settings.

I just updated to 5.7 and the exported files are blurry. I compared the ones I exported before the change and they are fine. I have not change any settings.

I don't understand your last paragraph.
"The home page also has a full bar ..." What does "full bar" mean? " ... instead of the tray it had before." What does "tray" mean?
Anyway, you might try Settings > General > Reset > Reset Home Screen Layout
I guess that cannot make things any worse.

I bought a Nikon D810 and the RAW files will not open in Photoshop 6. Can anyone help me?

I bought a Nikon D810 and the RAW files will not open in Photoshop 6. Can anyone help me?

You're welcome! It's usually CS5 and below that has the ACR update problems.
What counts is that you are back in business.
Gene

Since updating my iPhone 3GS to iOS 4.3.3 I have been unable to sync my photos! Keep getting the error message unable to sync and 'the required file cannot be found.' Please help?

Since updating my iPhone 3GS to iOS 4.3.3 I have been unable to sync my photos! Keep getting the error message unable to sync and 'the required file cannot be found.' Please help?

Try deleting the iPod Photo Cache on your computer.
http://support.apple.com/kb/ts1314

I recorded audio with Quicktime player and the sound files won't disappear from the desktop no matter how I try to put them in the trash...

I recorded audio with Quicktime player and the sound files won't disappear from the desktop no matter how I try to put them in the trash...tried xing out the red x, putting them in the trash...right clicking to make them disappear...nothing works...

Just got rid of them... I closed Quicktime and was asked to delete. So I deleted them. Problem solved.

I uninstalled itunes, downloaded new version and the setup file won't launch. I'm running Windows Vista 64-bit. Can anyone help?

I uninstalled itunes, downloaded new version and the setup file won't launch. I'm running Windows Vista 64-bit. Can anyone help?

Is there an error message when you try to launch the iTunesSetup.exe (or iTunes64Setup.exe)? If so, what does it say? (Precise text, please.)

Personal Domains and the index file

Similar Messages

Maybe you are looking for