Personal File Sharing failure between Leopard MBP and Tiger iMac

Hi,
I am attempting to give the iMac access to files on the Leopard using Personal File Sharing. Personal File Sharing is turned on on the MBP. The firewall on the MBP has been variously set for Essential Services Only and turned off. The firewall on the iMac is off (it has no internet connection). I have tried both encrypted and unencrypted ad-hoc wireless networking on various channels. I have tried ethernet. The results are always the same:
1) the MBP will appear in the Network folder of the iMac, but any attempt to connect fails. I am unable even to reach a Drop Box.
2) the iMac appears in the Shared section of the Sidebar on the MBP, and connections of all kind work without problems
I have no internet connection in the house and am unable to try connecting both Macs to the same WiFi network for testing purposes. I have tried pinging each machine from the other using Network Utility, with failure reported in every case ---however, I'm led to believe this is not unusual in small network circumstances.
One other piece of info that may be relevant: I am also struggling to have my iPod touch found by my MBP when attempting to use the WebDAV protocol to share files with Files Lite. My iMac connects to Files Lite without issue. Stanza Desktop also refuses to find Stanza. Cyberduck will find Files Lite on the network from the MBP (the only app to recognise it in any way from my MBP), but will consistently fail to connect. Perhaps this is related?
Any help would be welcome. I can provide more information as needed. I have only offered the information I thought would be useful, and that fits within my layman's understanding of networking.
Thanks.
S.

Hi,
Well, it's all working fine now. Seems I /hadn't/ tried turning off the firewall on the MBP. The PFS now works with the firewall off or with "Set access for specific services and applications", but not "Essential services only".
*shrugs* I was so sure I'd tried it with the firewall off…
So, thanks! All is now kushti. I may have to grumble to myself a little (and ultimately to Apple) about the lack of co-operation between the firewall and the Sharing prefs, and what I perceive as a poverty (or at least poor layout) of information in the firewall settings pane, though. I mean, why can't the firewall automatically choose the correct setting depending on the Sharing preferences? Or, at least, provide a pop-up that such a change is necessary? Hmm…
Ta!
S.
PS: FYI, "guest" sharing was already enabled, presumably by default.

Similar Messages

Personal file sharing via a cable modem and AEBS

At home, my Internet access is provided by a Comcast cable modem. It used DHCP; however, the address I get assigned rarely changes. What I want to do is use my G5 and an external disk to back up files from my MBP while I travel.
I have a new AirPort Extreme Base Station which I use as my router. Is there any documentation available to download that tells me how to set up the AirPort base station to allow me to mount my G5's disks on my laptop when I travel? I know I need to enable personal file sharing, but how do I get the router to allow me to access my G5's disks from my hotel? I also want to access the disk drive that's connected to my AEBS remotely.
I can do this when I connect via my MBP to my AEBS wirelessly and it works great, but I don't know what to do on the AEBS to allow it to be done from anywhere.
Any tips will be appreciated.

Hmmm, don't have the "Extreme" AEBS here... Express or something, so it looks like this one...
http://portforward.com/english/routers/port_forwarding/Apple/AirPortExtreme/FTP. htm
And the setup has no "continue" button... just the ADD, OK, and then Update buttons.

Basic File Sharing question between user accounts on my iMac

I don't understand how to be able to share and download to one common folder among User Accounts on my iMac. I am trying to use a Clean Account as a test, and wanted to copy a file I downloaded from the web in one account into this clean account folder, and install the file.
I went to Sharing and thought I turn File Sharing on. Logged into the Clean account and Apple+I the folder, changing access priviledges to the folder. Then copy the file into the Clean User Account.
But it doesn't work that way. Can anyone help me understand sharing between accounts?

File Sharing is for sharing files between two different machines, not between different accounts on the same machine. If you want to share files on one machine, you just need to put them in a folder everyone has access to, like the /Users/shared folder. Also, don't go fooling around with folder permissions... that's a good way to mess things up. If I had a nickel for every time someone messed up their system using the "Apply to enclosed items" option when changing permissions, I'd be a rich man!

Leopard File Sharing Slow when Connecting to a Tiger iMac from a MacBook

I have a MacBook (2.0 GhZ Alu) with Leopard and an iMac (2.0GhZ Alu) with Tiger (both most recent versions). The iMac is connected to a Belkin N1 wireless modem-router and the MacBook uses Airport to connect to the router. On the iMac I use Finder and select Network and am instantly able to log-in and have access to the files on the MacBook within seconds, but while the MacBook instantly identifies the iMac connecting to it takes a number of minutes - much slower than when using the iMac - I have to wait while it finds the files and then wait again to log-in using my user name and if I close the Finder window it needs to happen all over again. Any ideas?

I've now updated both systems to Snow Leopard - Tiger and Leopard don't like sharing.

How do I share data between my MBP and iMac?

I have two Genealogy programs on my iMac that I would like to share data between my MBP and the iMac. I would like to gather the data on the MBP and then share new data to the iMac which is where I basically do all of the Genealogy work from, since it is much easier with the larger screen and better keyboard.
Can someone please explain or direct me to a tutorial or procedures if this is possible? Thank You!

Click Apple>System Preferences>Sharing
Check File Sharing. In File Sharing add the folder you want to share with another computer. Then add users. Then proide access previledges such as Read & Write, Read Only, Write Only or No Access.
Now in the System Preferences, Click iCloud, sign in to iCloud. It's free and you can access your Macs from anywhere.
In iCloud, check Back to My Mac.
Do the same to another computer. You're all set by now.

Problem with "Personal File Sharing"

Apple Support
"Personal File Sharing" does not work in my Powerbook G4 17 inch with 1.67 ghz CPU and with 1 gb ram.
There is long delay, if I turn on the "Sharing" dialogue box.
When it works shortly, I click the "Personal File Sharing" option.
Then there is long delay again, then "Windows Sharing" is automatically selected without any change.
"Personal File Sharing" is always off.
When I click the other options while this short moment, they can be turned on and off.
Only "Personal File Sharing" does not work!
And my Laptop can not be seen in other OS X.
How can I find the reason and how can I solve this problem?
What I can suppose is only the installation of Server Assistent.
Can it be a problem?
Sincerely yours
Message was edited by: prko

This may or may not help you, but doing so has helped numerous other users in other forums here (iChat, Mail, Print&Fax, etc.) that have reported crappy performance problems of one sort or another.
Download the OS 10.4.10 COMBO update for Intel (for ktom) or PPC (for prko).
Close all services and ports in Sys Prefs Sharing. Run Disk Utility and verify your boot drive. Then repair permissions. Reapply the combo update. Repair permissions again. Reopen desired services and ports in Sys Prefs Sharing. Reboot. Post back and let us know if that helped or not.

Personal file sharing Crahing

I am using 3 G5 1.8GHz having 10.4.6. I observed that personal file sharing service is crashing again and again on all the 3 mahines. If i start the service manually it runs for a moment and then automatically stopped again. any ideas why this is happening??

Thank you. I started to go through the hints but I am not through till now. I suppose I shall have to delete the hard disc and install the whole system new. But the time to do all the work will be not earlier than in two weeks.

Airport and personal file sharing between macbook pros

My wife and I each have 2.2 ghz macbook pros. I wanted to transfer about 30 photos from iphoto on my macbook pro to my wife's macbook pro; I turned on personal file sharing on my computer (the "host"), exported the jpegs from iphoto to my shared folder, and then used the wireless network to mount the shared folder on my wife's desktop. She downloaded the jpegs onto her computer from my shared folder but found that 5 of them would not open-- preview gave a message that it couldn't recognize the files. The other 25 photos seemed to open fine. I went back to my computer and e-mailed the same 5 photos that preview couldn't recognize, and my wife's computer had no trouble opening the e-mailed photos with preview.
Does anyone have any idea what went wrong with using personal file sharing and airport to transfer the photos between the 2 macbook pros? All software and firmware on both computers are both up to date. Thanks very much.

Not sure what went wrong, but there's an easier way ...
On the source Mac open iPhoto Preferences/Sharing and check "Share my photos" and "Share entire Library"
On the destination Mac open iPhoto Preferences/Sharing and check "Look for shared photos"

Personal File Sharing and Kernel Panic?

I used Personal File Sharing between my MacBook 2 GHz Intel Core 2 Duo and my iMac G5 both with Mac OS 10.4.9 and within the same AirPort Extreme net. Now both computers no longer find the other server after I unplugged all computers and the AirPort basic station during a thunderstorm. The program MacSysInfo which I installed today found the following kernel panic. It seems to me that the time of the kernel panic is the time from which Persoanl File Sharing is no longer working. The connection to the printer within the same net still works for both computers. What can I do to solve the problem?
Sat May 26 18:53:22 2007
panic(cpu 0 caller 0x001A429B): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x80010033, CR2: 0x00000008, CR3: 0x00d6a000, CR4: 0x000006e0
EAX: 0x038f5640, EBX: 0x00000008, ECX: 0x03adbccc, EDX: 0x14023d68
CR2: 0x00000008, EBP: 0x14023cc8, ESI: 0x12871360, EDI: 0x03adbc08
EFL: 0x00010202, EIP: 0x0015abfa, CS: 0x00000008, DS: 0x00000010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x14023aa8 : 0x128d08 (0x3cb134 0x14023acc 0x131de5 0x0)
0x14023ae8 : 0x1a429b (0x3d0e4c 0x0 0xe 0x3d0670)
0x14023bf8 : 0x19ada4 (0x14023c10 0x31dbe80 0x14023c68 0x190ef9)
0x14023cc8 : 0x15c7f4 (0x3adbc00 0x190 0xb3200000 0x0)
0x14023d88 : 0x160505 (0x3adbc00 0x265000 0x0 0x38d7110)
0x14023df8 : 0x160bd2 (0xb3200000 0x0 0x38d7110 0x265000)
0x14023f48 : 0x1a450e (0x300e490 0xb3200000 0x0 0x3)
0x14023fc8 : 0x19acd4 (0x25c6660 0x0 0x10 0x336cca0) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbfffabd8
Kernel version:
Darwin Kernel Version 8.9.1: Thu Feb 22 20:55:00 PST 2007; root:xnu-792.18.15~1/RELEASE_I386

Thank you. I started to go through the hints but I am not through till now. I suppose I shall have to delete the hard disc and install the whole system new. But the time to do all the work will be not earlier than in two weeks.

Personal File Sharing and Printer Sharing difficulty

I hope someone can help me, this is really irritating.
I have an Intel iMac running OS X 10.4.11 and a motley band of other computers, Mac and Windows. For the past few months, I haven't been able to use Personal File Sharing or Printer Sharing to connect to the iMac. Some details:
1) Everything used to work about 6 months ago, but stopped... I don't know exactly when it stopped and I don't remember any installations/updates/etc that happened around that time.
2) I can't connect from a OS X 10.3 Powerbook to the iMac, but I can connect from the iMac to the Powerbook.
3) None of my Windows computers are able to do anything.
4. All of the computers have no trouble connecting to the Internet.
5. I don't know if this means anything, but the iMac beeps as soon as the desktop appears on startup and right before the desktop disappears on shutdown.
Does anyone have any ideas? Everything seems to be set up properly... the Sharing control panel shows that all Personal File Sharing, Windows Sharing, and Printer Sharing are all running.
Thanks,
Joe

Hi Joe, and a warm welcome to the discussions!
1. Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
2. Find the IP of the iMac in it's Network Pref Pane>TCP/IP tab. In finder, select Go menu>Connect to Servers..., then on the PB, type in afp://ip.of the iMac, like...
afp://10.0.1.5
afp://192.168.1.3
3. From Windows®, try...
smb://10.0.1.5
smb://192.168.1.3
5. Open Console as soon as it boots up, check for meaningful messages.

Personal File Sharing between Remote Networks

Trying to connect my Mac (OS 10.4.9) in one state to a Mac in another state (OS 10.3.9). I am connected to the internet via Airport. Second Mac is connected to the internet via DSL modem. With file sharing turned on, on both computers, and firewalls turned off (System Preferences: Sharing: Firewall Off), neither computer can connect to either computer via Personal File Sharing (I went to Go: Connect to server... Then entered the correct IP address).
Also, have not been able to use my computer as an FTP server (System Preferences: Sharing: FTP Access On) such that the second computer can connect via Cyberduck (FTP client software).
I know little about all this, but in my research over the last two days I am unsure why my efforts have not worked (for either Personal File Sharing or FTP connections). the following two Support pages on Personal File Shariing have not worked for me:
http://docs.info.apple.com/article.html?artnum=107369
http://docs.info.apple.com/article.html?artnum=106661
iMac G5 2GHz Mac OS X (10.4.9)

What is a NAT router? Your suggestion to use a file
storage service as an alternative sounds like it
might be a good idea for me. It's just that the Apple
Support articles made file sharing sound so simple
(i.e. "This allows Macintosh computers in remote
locations to share files with any type of Internet
connection").
This is like saying the Interstate highway system makes it easy to drive from one city to another. It's true, but you need to know something about driving first. Similarly, you need to know something about Internet traffic.
To continue with the highway analogy, let's say your data is like a car. Actually, it's a packet with addressing information inside. The key addresses are source and destination IP addresses. When inside your town, or LAN, it's got local addresses. Maybe your computer is 10.1.1.2 and your printer is 10.1.1.3 and a car destined from your computer to your printer has a source of 10.1.1.2 and a destination of 10.1.1.3. This is like saying take a left at Main Street.
But there are maybe millions of Main Streets. Where this all changes is where we go out to the Interstate, or global Internet. Your router is your gateway to this traffic. It has two interfaces, one side talks to your locality and it has a number like 10.1.1.1, and another side which talks to the global Internet and might have a number like 71.126.45.113. As your car goes through this router, it's source number changes to become that of the router (71.126.45.113). This is so it can find its way back, and others can follow. The local address has no meaning out here. When it (or rather another car) returns, the router swaps the addresses back and sends it to the local network. This process is called NAT (Network Address Translation).
Now, the problem you find is that you can reach the destination router, and what you want is to get to another machine in that locality, but there is no local destination. You get to the toll booth at the end of the Interstate, but the toll taker doesn't know where you want to go. This is where ports come in. Your car has a number which corresponds to a service. In this case, the port is 548 and the services is Apple Filing Protocol over TCP. The toll taker know this. "Oh yes, Mrs. Johnson on First Street handles afpovertcp. Take a left on Main Street." This is called port-forwarding. You set the router to send requests for port 548 to the machine you want shared.
Another possibility would be to disable NAT. This has some drawbacks. If you have more than one machine, you may violate your contract with your ISP. You also open yourself up to certain attacks and need to be much more careful. There's another possibility called DMZ, but that's like disabling NAT for one machine.
I hope this clarifies things. You need to use the addresses of the routers, and forward the ports you wish to use. There's one more consideration: unless you have static IP addresses, those are likely to change. You can use a service like www.dyndns.com to use a host/domain name to connect your machines. It's free and easy.
Powerbook G4, iMac (Intel), and tons of hardware sitting in the closet Mac OS X (10.4.8)

Originating File Sharing Mini with Leopard G3 Beige and Vice Verse.

I guess a sub-heading of this would be connecting to the newest Mac from an older one.
Here is a problem: I can set up the G3 Beige (running Jaguar) as a file sharing server and very easily connect to it from the a Mac Mini by using top menu Go>Connect to server.
Where i run into what seems to be impossible is to do the same thing from the G3. Nothing seems to establish a connection. It is always rejected with a no connection error message.
Both machines are wirelessly connecting through a router. The mini with internal airport and the G3 beige using an external D-link bridge. Both work fine accessing the internet.
Main reason i wanted to do this is that my Shared Printer is on the Mini and i wanted to print something from the Beige to it.
Can anybody help, or am i attempting the impossible.

DEAR Grant Bennet-Adler: Thank you for your last reply. I'm not sure exactly what i did but I was able to connect. To answer your questions:
IP Addresses are similar. One is ...101 and the other is ...102.
My router uses DHCP.
What seemed to fix the problem was going to security>firewall on the MINI and checking
o Allow all incoming messages.
Not sure what ODS Agent.app is but it is highlighted as allow incoming vs blocked.
Both computers "allow personal file sharing"
On the G3 i was able to connect after a bit of trial and error: On the G3, when i "Connect to Server" i am presented with three choices of servers, one of which is the G3 itself--I wish the system wouldn't remember irrelevance.
One of the choices is OK and when i checkit i get the ID and Password Dialog--again for ID i am presented with the MINI's name and not my user (Admin) name.
Change that, type in the password and i am given a list of drives on the folder. That includes any opened from a .img.
After i open one i then see it on my desktop and can get into it.
One slight problem: Once into one, i can;t go back to "go to server" to open more. I get timeouts, error messages and other stuff. I have to start over. That also appears to be to include disconnecting the connection to the G3 server that gets set up on the MINI.
Regards:
p.s I hven't gotten into Shared Printer although i saw it did show up in the Firewall dialog.I think i have the Canon MP470 Software on the G3 as well as the Mini but i will have to check on it.
p.p.s. Next thing is to try X PostFacto on the G3 again to try to install a later OS; but this time not making the mistakes that totally messed it up the last time, last year, that i tried it.

Personal file sharing is not working from Snow Leopard (10.6)

I am having hard time making the personal file sharing on my MacBook running 10.4.11 accessible from my work computer MacBook Pro running 10.6.2.
They are connected to the same router.
On 10.4.11 MacBook side, I turned off Firewall and started Personal File Sharing.
On 10.6.2 MacBook Pro, I saw the MacBook below "SHARED" in the side bar of Finder window. I double clicked on the icon. It showed all users of the MacBook. I double clicked on one user, then an error dialog showed and the connection had been disconnected. Since then, only "Not Connected" is shown in the Finder window. There is no Reconnect button. I had to reboot 10.4.11.
Should 10.6.2 be able to open the public folders on 10.4.11?
What is the best way to trouble shoot this?

I had much the same problem except that it was a PB running 10.4.11 to a G4 running same.
Check this article - http://www.macosxhints.com/article.php?story=20070226213016446
The PB could connect to an iMac with no problem and the G4 could connect to the PB and iMac and vice versa.
Turns out that com.apple.ByteRangeLocking.plist had been deleted from the G4 Root Library at some point. Copied it from the user preference file and everything now works again.

Personal file sharing: file copying broken from/to imported account?

I have an iMac G5 with two user accounts A and B ; and a MacBook Pro with two user accounts A' (imported from A with the migration assistant) and C.
Personal file sharing, FTP and SMB are enabled on both machines. The firewall is disabled. Permissions, as well as the Keychain have been repaired.
When I am logged as A' on the MBP, and when I connect to the iMac with the username/password of A, I can't copy files from A' to A : I get the following error message [The operation cannot be completed because you do not have sufficient privileges for some of the items]. However, a 0-byte file is created on A'. The same problem occurs from A to A'.
This problem drives me crazy because :
- I can read and delete any file in A' from A (and vice-versa). Only copy and modification doesn't work.
- I can copy files from A to C, A' to B, C to A, B to A'.
- FTP sharing between A and A' does work.
Someone got the problem solved by re-creating his account and re-importing all his data, but I absolutely want to avoid that. I'm sure there can be a simpler solution...
It appeared to me that the only reason why AFP copy doesn't work between A and A' is that A' was imported from A. It seems also that a common broken preference/setting is not the source of the problem, since sharing works from/to any other account (and well, re-creating the account couldn't solve the problem as it would re-set the broken settings).
I would like to know which information is used to determine user privileges when copying from one machine to another...
A strange thing I noticed is that both A and A' have the same generateduid (which is thus not "unique") - could it be the source of the problem?
If you have two machines with one account imported from one machine to another, can you check whether Personal file sharing with this account works? I love understanding why stuff doesn't work.
Thanks!

Here are the results of a few more experiments... Something is definitely broken with those two user accounts, but I'd like to know why, and how it got broken
I have replaced the names of the accounts/machines by more meaningful identifiers.
From the MBP, trying to access Account_B on the iMac:
MBP:~ account_A'$ mkdir test
MBP:~ account_A'$ mount -t afp afp://accountB:*****@iMac/accountB test
mount_afp: the mount flags are 0000 the altflags are 0020
MBP:~ account_A'$ ls -l test
total 0
drwx------ 29 account_A' account_A' 942 Nov 8 22:28 Desktop
drwx------ 14 account_A' account_A' 432 Sep 24 23:47 Documents
(And I can copy whatever I want in test)
Now trying to access Account_A:
MBP:~ account_A'$ mkdir test
MBP:~ account_A'$ mount -t afp afp://accountA:*****@iMac/accountA test
mount_afp: the mount flags are 0000 the altflags are 0020
MBP:~ account_A'$ ls -l test
total 0
drwxr-xr-x 23 501 501 738 Aug 26 00:03 Code
drwx------ 13 501 501 398 Nov 8 13:10 Desktop
(I can't copy to test here)
501 is the uid of account_A (on the iMac). (The uid of account_A' is 503).
Same stuff through SMB:
MBP:~ account_A'$ mkdir test
MBP:~ account_A'$ mount -t smbfs //accountA@iMac/accountA test
Password:
MBP:~ account_A'$ ls -l test
total 0
drwxr-xr-x 1 account_A' account_A' 16384 Aug 26 01:03 Code
drwxr-xr-x 1 account_A' account_A' 16384 Nov 8 13:10 Desktop
(In this case, it works)

Personal File Sharing - Shared Folders not found

I have a mbp and 2 iMacs. They connect to the internet through an airport extreme. I would like to share files between them all. I have tried using personal file sharing in System Preferences. I turned it on, on all the machines. I also turned on apple talk under Network in System Preferences. All of the machines can ping each other yet when I go to Network no folders come up.
Do I need to do anything with the router or any other settings?
Any help would be great. Thank you.

See the following:
http://www.apple.com/support/tiger/network/
http://docs.info.apple.com/article.html?artnum=106461
http://docs.info.apple.com/article.html?artnum=107369
Also select Mac Help from the Finder's Help menu, enter the word "sharing" in the search field. You will find a listing of numerous articles on file sharing.

Personal File Sharing failure between Leopard MBP and Tiger iMac

Similar Messages

Maybe you are looking for