Personal File Sharing on my eMac turns off by itself

I have three computers in my home office environment-- a eMac using Tiger fully updated--in fact it just came back from Apple Care doctors due to hard drive and memory issues-- (we think a power surge into my house caused it)--I also have a iBook-- four years old--running Tiger fully updated, but slow--- then I just got a MacBook running Leopard---- anyway I can get my laptops to network and share files, and I can get my eMac to connect to the laptops for file sharing, etc--- however, when I try to link the laptops to the eMac it hooks up for less than a minute, then I lose the connection--- it indicates issues with the connection, and on the MacBook yo use the link is gone. I go into the preferences in the eMac and see that the Personal File Sharing check box is no longer checked. I have tried resetting it, locking the preferences, etc. but I cannot get it to stay connected-- it is a minor issue, but one I would like to resolve--- thanks

Well, I have tried everything that you have indicated, including re-starting the eMac from the Tiger installer DVD and going to the Disc Utility and repairing the disc (nothing wrong) and repairing permissions-- lots needed corrections-- anyway, I still get the issue--- when I try to locate the eMac on the home netwrok, it looks like it hooks up for a second or so then I get a yellow triangle with an explanation mark in it saying the network is interrupted--and when I go into the system preferences the Personal File Sharing button is unchecked--- weird !!!
Ok, here are a couple of other interesting items-- when I go to the Go menu item and scroll down to the Network command, it will open a box for more than a split second the first time-- then not at all after that.
Secondly, when I do try to access the eMac, I do not ever get the little Connect to Server box asking for the short name and password to enter (??)-- also weird.
Any other suggestions--- this eMac was recently totally re-built-- new hard drive, new memory and new logic board-- (Seems I had a serious power surge in my office and it fried everything) -- I even had to re-install my printer and scanner software-- !!! Thanks for any suggestions.

Similar Messages

  • Personal File Sharing won't be turned on anymore

    Under the Sharing System Preference, the Personal File Sharing will not be turned on anymore. When I select it, "File Sharing staring up . . ." message comes up, but it stays like that forever. Because of this problem, I can not share my files with other computers anymore. Is this due to a corrupted preference file, or something? Please help me.
    PowerBook G4   Mac OS X (10.3.9)  

    welcome to the club
    http://discussions.apple.com/thread.jspa?threadID=352820

  • Personal File Sharing with Fast User Switiching

    I have 2 users set up on the iBook. I want file sharing turned on for only one of the users and off for the other. Both are logged in.
    Any way to do this?
    It appears that personal file sharing is either on or off for all users.

    As far as i know either the AFP daemon is on or is off - for all users.. You can disable the Public share for a user if oyu like by using netinfo or SHarepoints but you cant turn off sharing for a user. If you have AFP active they can login. Now there may be away with some shell commands to add som config to this and disable on a user level but i havent seen it mentioned naywhere - or requested for that matter.

  • Personal file sharing: not possible

    Hi all, when I tried to turn ON Personal File Sharing , it switchs back to Off. Any ideas.
    Thanks and Merry Xtmas

    Hi Borec,
    It could be that your System Preferences plist file is corrupted.
    Navigate to User/Library/Preferences folder, and find the file:
    com.apple.systempreferences.plist
    Trash this file, and reattempt to reset your Personal File Sharing. (By the way, you'll need to reset all your system prefs, after you trash the above file...)
    Merry Christmas,
    Bob

  • Personal file sharing turns off by itself

    Hey everyone. My Personal File Sharing keeps turning off on my Mac Pro when I try to access it from my PowerBook. I have tried repairing permissions on both computers and still no luck. Also tried locking the little padlock in the Preferences Control Panel and no luck. The computer name is one word with no spaces.
    I did a search on this topic but found an archived post with no new suggestions. Any advice out there?
    PowerBook G4 15 Titanium 1.5 GHz   Mac OS X (10.3.7)  

    I'd try trashing on the one that changes...
    /Library/Preferences/com.apple.sharing.firewall.plist
    Then reboot and setup Sharing again.

  • Personal File Sharing Turns off after an attempt to connect from other comp

    I have personal file sharing turned on on my MacBook and when I attempt to connect to it from my iMac I get a typical logon windows and extended delay and then the message that the Server Connection was Interrupted. When I check Personal File Sharing on the MacBook it has been turned off even though I have locked the settings.
    The problem exist whether I use my local Wireless LAN (Apple-N) or an ethernet connection. In both cases the MacBook the ethernet connection is with the a port on the Apple N wireless LAN

    It may be solved for you, but I just discovered that since upgrading to 10.4.11 I can no longer connect to any of my other Macs. When I click on network NOTHING shows up in the Finder.
    While I'm happy to grab random code posted by an unknown person and stick it in my system, I shouldn't have to. Clearly Whatever the update did to your Mac it did to my MacBook as well and most likely others. If this is the official fix for the problem, Apple needs to acknowledge it and offer a link to the file rather than relying on fix-it forums to solve their problems.
    Apple seriously needs to test these updates a little more thoroughly before they make them available. I KNOW you are supposed to back everything up before you do it, yada, yada, yada ... but Apple has basically made the Software update feature an automatic function as if it is the best thing for your computer ... clearly that is not always the case.

  • Personal File Sharing Keeps Turning Off.

    I have a second notebook, a Powerbook G4 Titanium 667 which is still amazingly useful for all but the most demanding apps and I regularly leave an external hard disk connected to this which I access by attaching to the G4 from my Macbook, via Finder, in the Server section. I authenticate and then choose the external disk volume and it mounts no problem.
    My issue is that since a recent batch of software updates (perhaps a week ago), I no longer see the G4 in the Servers list. I returned to the G4 and found that Personal File Sharing was not longer enabled. I re-enabled it and locked the preferences again. I then see the G4 from my Macbook, connect as before and the volume mounts for a few seconds before being disconnected. I am then unable to reconnect. When I visit the G4 again, I find that the preferences are still locked but now Personal File Sharing is DISABLED.
    I've not found any way around this, but console indicates that AppleFileServer failed. The crash report log does show the error. Here's the head of the file's last entry:
    Host Name: powerbook-g4
    Date/Time: 2008-04-13 08:52:48.696 +0200
    OS Version: 10.4.11 (Build 8S165)
    Report Version: 4
    Command: AppleFileServer
    Path: /usr/sbin/AppleFileServer
    Parent: launchd [1]
    Version: ??? (???)
    PID: 6379
    Thread: 4
    Exception: EXCBADACCESS (0x0001)
    Codes: KERNINVALIDADDRESS (0x0001) at 0x00705000
    I've found references to other apps causing this but no mention of this with a G4 / 10.4.11. Any advice appreciated.

    Welcome to the forums!
    Reading the title I was certain I knew the answer, but I've never thought to have anyone check or report the Log on this, soooo, maybe I don't know and this might be something different.
    But usually this is fixed by dragging one or more of these files to the Desktop, Rebooting, setting up again... it may just be one, or many at a time needed...
    /Library/Preferences/com.apple.sharing.firewall.plist
    /Users/nnnnLibrary/Preferences/com.apple.internetconnect.plist
    /Library/Preferences/SystemConfiguration/preferences.plist
    /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
    Then, if it's certain other kinds of connections, there may also be files like this...
    /Users/nnnn/Library/Preferences/ByHost/com.apple.networkConnect.<ethernet MAC address>.plist

  • Unable to turn on personal file sharing

    Hello,
    i've been exchaging files between 2 macs over a windows-based network for about 1 year without any problem. And suddenly for no particular reason it doesn't work any more. I checked the sharing preferences and noticed that on one of the macs the box Personal File Sharing was unchecked. It is impossible to check it again. It's neither greyed our nor do I get an error message. It just does not check it.
    Anybody know what the problem is?
    Thanks
    G5 Quad   Mac OS X (10.4.8)  

    Hmm, something deeper eh?
    You aren't runnung any other Firewall or proection are you?
    Fixed Permissions already?
    I think these three files can also affect it...
    /Users/nnnnLibrary/Preferences/com.apple.internetconnect.plist
    /Library/Preferences/SystemConfiguration/preferences.plist
    /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist

  • Problem with "Personal File Sharing"

    Apple Support
    "Personal File Sharing" does not work in my Powerbook G4 17 inch with 1.67 ghz CPU and with 1 gb ram.
    There is long delay, if I turn on the "Sharing" dialogue box.
    When it works shortly, I click the "Personal File Sharing" option.
    Then there is long delay again, then "Windows Sharing" is automatically selected without any change.
    "Personal File Sharing" is always off.
    When I click the other options while this short moment, they can be turned on and off.
    Only "Personal File Sharing" does not work!
    And my Laptop can not be seen in other OS X.
    How can I find the reason and how can I solve this problem?
    What I can suppose is only the installation of Server Assistent.
    Can it be a problem?
    Sincerely yours
    Message was edited by: prko

    This may or may not help you, but doing so has helped numerous other users in other forums here (iChat, Mail, Print&Fax, etc.) that have reported crappy performance problems of one sort or another.
    Download the OS 10.4.10 COMBO update for Intel (for ktom) or PPC (for prko).
    Close all services and ports in Sys Prefs Sharing. Run Disk Utility and verify your boot drive. Then repair permissions. Reapply the combo update. Repair permissions again. Reopen desired services and ports in Sys Prefs Sharing. Reboot. Post back and let us know if that helped or not.

  • Personal File Sharing: Lost Connection

    I'm trying to use my new miniStack external HD attached via Firewire to my Mac mini as a pseudo network drive. In other words, I want that drive available to my mini and my two iBooks. If I can get that working, I'd like it available to my XP box as well.
    I have wireless internet via an Airport Express and cable modem throughout the house. All four computers are attached via wireless cards.
    I've turned on personal file sharing on the mini using my administrator log in. I've also activated AppleTalk via the Airport settings in the Network preference settings.
    I've also activated AppleTalk on my iBook and turned on personal file sharing.
    All my Macs are running the latest version of OS X (10.4.7).
    I restarted both machines after making the above setting selections. I then used the Finder on my iBook to search for the mini. I clicked on the Network icon, found 'servers', 'library', and the following folders: "home" which has my XP box readily accessible, "My Network" and "Workgroup". Each of these last has an icon for my mini.
    When I double click on my Mini, it shows me all volumes on it, including my miniStack. I select one to connect to and get a beach ball followed by an error message saying "Server Connection Interupted: miniStack" and a single button marked 'disconnect'.
    After I press the disconnect button (my only choice) I notice that personal file sharing on my mini is now turned off.
    This exact same thing happens when I try to access the native internal HD on my mini so it isn't just the external stack that's the problem.
    I've searched high and low through the fora here and can't find anything addressing this.
    Does anyone have any idea what I'm doing wrong?
    Thanks and take care,
    Jeff

    After much trial and error, I finally resorted to doing a Archive and Install on my mini. After doing so, everything works great. I still have no clue what the problem was but I now have no interest in finding out since it's working great.
    Of note, the lost connection problem was unidirectional. I had no difficulties logging onto and accessing anything on either of my iBooks from my mini. Just the other way around.
    Take care,
    Jeff

  • Personal File Sharing failure between Leopard MBP and Tiger iMac

    Hi,
    I am attempting to give the iMac access to files on the Leopard using Personal File Sharing. Personal File Sharing is turned on on the MBP. The firewall on the MBP has been variously set for Essential Services Only and turned off. The firewall on the iMac is off (it has no internet connection). I have tried both encrypted and unencrypted ad-hoc wireless networking on various channels. I have tried ethernet. The results are always the same:
    1) the MBP will appear in the Network folder of the iMac, but any attempt to connect fails. I am unable even to reach a Drop Box.
    2) the iMac appears in the Shared section of the Sidebar on the MBP, and connections of all kind work without problems
    I have no internet connection in the house and am unable to try connecting both Macs to the same WiFi network for testing purposes. I have tried pinging each machine from the other using Network Utility, with failure reported in every case ---however, I'm led to believe this is not unusual in small network circumstances.
    One other piece of info that may be relevant: I am also struggling to have my iPod touch found by my MBP when attempting to use the WebDAV protocol to share files with Files Lite. My iMac connects to Files Lite without issue. Stanza Desktop also refuses to find Stanza. Cyberduck will find Files Lite on the network from the MBP (the only app to recognise it in any way from my MBP), but will consistently fail to connect. Perhaps this is related?
    Any help would be welcome. I can provide more information as needed. I have only offered the information I thought would be useful, and that fits within my layman's understanding of networking.
    Thanks.
    S.

    Hi,
    Well, it's all working fine now. Seems I /hadn't/ tried turning off the firewall on the MBP. The PFS now works with the firewall off or with "Set access for specific services and applications", but not "Essential services only".
    *shrugs* I was so sure I'd tried it with the firewall off…
    So, thanks! All is now kushti. I may have to grumble to myself a little (and ultimately to Apple) about the lack of co-operation between the firewall and the Sharing prefs, and what I perceive as a poverty (or at least poor layout) of information in the firewall settings pane, though. I mean, why can't the firewall automatically choose the correct setting depending on the Sharing preferences? Or, at least, provide a pop-up that such a change is necessary? Hmm…
    Ta!
    S.
    PS: FYI, "guest" sharing was already enabled, presumably by default.

  • Personal File sharing is on but not working

    This problem has been plaguing me for some months. When I try to access the problem computer on the network it will not show up until I turn off Personal File Sharing and then turn it back on. Then all works fine for several days until it doesn't work, and then I repeat the process (turn PFS off and then back on again) to make it work. I can't make an association with any third party programs that might be contributing to the problem.
    I thought that the problem might go away with the purchase of a new iMac (10.4.10) and initialized with Migration Manager. Apparently, I imported the problem.
    In the past I've tried restart with opt-cmd-P-R which works for awhile and then the process start over again. I've also tried dragged /Library/Preferences/com.apple.sharing.firewall.plist to the trash and restarted.
    Anybody have any ideas on how to solve this one? Is there a log file that might show when PFS is tampered with?
    Thanks in advance.

    At this point I think you should get Applejack...
    http://www.versiontracker.com/dyn/moreinfo/macosx/19596
    After installing, reboot holding down CMD+s, then when the prompt shows, type in...
    applejack AUTO
    Then let it do all 5 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 5 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Also, if you trash those files again, and it re-occures again, I'd suspect RAM maybe.

  • Personal File Sharing between Remote Networks

    Trying to connect my Mac (OS 10.4.9) in one state to a Mac in another state (OS 10.3.9). I am connected to the internet via Airport. Second Mac is connected to the internet via DSL modem. With file sharing turned on, on both computers, and firewalls turned off (System Preferences: Sharing: Firewall Off), neither computer can connect to either computer via Personal File Sharing (I went to Go: Connect to server... Then entered the correct IP address).
    Also, have not been able to use my computer as an FTP server (System Preferences: Sharing: FTP Access On) such that the second computer can connect via Cyberduck (FTP client software).
    I know little about all this, but in my research over the last two days I am unsure why my efforts have not worked (for either Personal File Sharing or FTP connections). the following two Support pages on Personal File Shariing have not worked for me:
    http://docs.info.apple.com/article.html?artnum=107369
    http://docs.info.apple.com/article.html?artnum=106661
    iMac G5 2GHz   Mac OS X (10.4.9)  

    What is a NAT router? Your suggestion to use a file
    storage service as an alternative sounds like it
    might be a good idea for me. It's just that the Apple
    Support articles made file sharing sound so simple
    (i.e. "This allows Macintosh computers in remote
    locations to share files with any type of Internet
    connection").
    This is like saying the Interstate highway system makes it easy to drive from one city to another. It's true, but you need to know something about driving first. Similarly, you need to know something about Internet traffic.
    To continue with the highway analogy, let's say your data is like a car. Actually, it's a packet with addressing information inside. The key addresses are source and destination IP addresses. When inside your town, or LAN, it's got local addresses. Maybe your computer is 10.1.1.2 and your printer is 10.1.1.3 and a car destined from your computer to your printer has a source of 10.1.1.2 and a destination of 10.1.1.3. This is like saying take a left at Main Street.
    But there are maybe millions of Main Streets. Where this all changes is where we go out to the Interstate, or global Internet. Your router is your gateway to this traffic. It has two interfaces, one side talks to your locality and it has a number like 10.1.1.1, and another side which talks to the global Internet and might have a number like 71.126.45.113. As your car goes through this router, it's source number changes to become that of the router (71.126.45.113). This is so it can find its way back, and others can follow. The local address has no meaning out here. When it (or rather another car) returns, the router swaps the addresses back and sends it to the local network. This process is called NAT (Network Address Translation).
    Now, the problem you find is that you can reach the destination router, and what you want is to get to another machine in that locality, but there is no local destination. You get to the toll booth at the end of the Interstate, but the toll taker doesn't know where you want to go. This is where ports come in. Your car has a number which corresponds to a service. In this case, the port is 548 and the services is Apple Filing Protocol over TCP. The toll taker know this. "Oh yes, Mrs. Johnson on First Street handles afpovertcp. Take a left on Main Street." This is called port-forwarding. You set the router to send requests for port 548 to the machine you want shared.
    Another possibility would be to disable NAT. This has some drawbacks. If you have more than one machine, you may violate your contract with your ISP. You also open yourself up to certain attacks and need to be much more careful. There's another possibility called DMZ, but that's like disabling NAT for one machine.
    I hope this clarifies things. You need to use the addresses of the routers, and forward the ports you wish to use. There's one more consideration: unless you have static IP addresses, those are likely to change. You can use a service like www.dyndns.com to use a host/domain name to connect your machines. It's free and easy.
    Powerbook G4, iMac (Intel), and tons of hardware sitting in the closet   Mac OS X (10.4.8)  

  • Is my airport network secure with Personal File Sharing on?

    I have my Airport Extreme connected to a cable modem. I have a G4 tower w/external hard drive connected by ethernet cable to the airport base station. I use a MacBook laptop wirelessly around the house to access the internet.
    Each computer is set up for multiple users but we don't use passwords with any of our user accounts. I have Personal File Sharing turned on in both computers and am able to access accounts and drives from the other computer in the house.
    I do have password protection (WPA/WPA2 personal) set up on the Airport network itself.
    Does the fact that I don't have passwords on the user accounts mean someone outside of my home could get into my home network and access my files?
    Does the afp address I use to access the other computer in the house afp://10.0.XXX mean it is restricted to people outside of my home?
    Any guidance someone could provide is appreciated.

    Does the fact that I don't have passwords on the user accounts mean someone outside of my home could get into my home network and access my files?
    No.
    WPA (with a strong non-dictionary password) is going to keep everyone off you network.
    If they could get on your network, then they would be able to access your files.

  • Password Protecting Personal File Sharing

    Hi,
    I can't find an option to password-protect the Personal File Sharing in System Preferences - and if I click Network in Finder, I can see my Mac (local server) and am able to access any folder, app or whatever. Can people on other macs who joined my network do this? The firewall for PFS is turned on.
    Thanks guys.

    You're not really turning PFS off. Didn't mean to give you that impression, sorry.
    Sharepoints lets you specify which folders you ARE sharing, and password-protects them.
    Just download it and see. A picture/demo is worth 1,000 words.
    This is donationware software.
    Like it? pay the guy something.
    Don't like it? Don't use it.
    Don't want to donate a few shekels? Then don't. (cheapskate that's a wink, since I'm just joking with you there.
    I am not affiliated with Sharepoints in any way.

Maybe you are looking for

  • Problem creating a sales order for configurable material in SAP ECC

    I have a Variant Configurable material named X. The structure of this VC material is Material X has charatcertics CHARCTERISTIC1 and CHARCTERISTIC2. CHARCTERISTIC1 has values VALUE1 CHARCTERISTIC2 has values VALUE2 I created a sales order manually fr

  • Negative Sign in the front for amount

    Hi Friends, i am facing problem in negative sign while using fm : cloi_put_sign_in_front which accepts char variable. In my report amount type is char15 and here negative sign appears after using this fm but when i download this data in one other cha

  • Printing Thai characters on Windows 7

    Dear Experts, We are developing our system on Windows 7 and we are testing on the printer with Thai characters from SAP(GUI710 Patch 17).  On "Print Preview" everything looks fine but after printed there are some Thai characters (vowels) do not align

  • HT201210 itunes is not downloading the software for restore

    im am trying to restore my iphone after it got locked for some dumb reson(locked = needs activation for no f**king reson). when i press the restor button in itunes i get a message "There was a problem downloading the software for the iPhone "My iPhon

  • FCP User Manual viewer

    OK, this seems like it wouldn't be a FCP question, but hopefully someone has the answer: I needed to look something up in the manual, so I went Help --> User Manual and it opened up in Adobe Reader. It used to open up in Preview. Preview has a much f