Personal hotspot is searching endless and can´t be stopped

After installing IOS6 on my iPad 3 the problem occured. The system is searching untikl the battery is down.

    Hi JWDC,
Oh my! It sounds like you have been quite dilligent in troubleshooting your phone. You are absolutely correct in knowing that placing the phone in Safe Mode or performing a Hard Reset is a great way to help determine the nature of the processes on your phone. As you requested, I have provided links with step by step directions for both Safe Mode; http://bit.ly/mX5mec and performing a Hard Reset; http://bit.ly/nExWmP for your Motorola Droid Bionic.
Plese keep in mind that some processes can not be completely stopped as they are imperative to the core function of the phone.
Let us know if you have further questions.
Thanks,
TanishaS_VZW
Follow us on Twitter @VZWSupport

Similar Messages

  • How can I tether via USB my iPhone 4S with iOS 7.1.1 to my MacBook with Snow Leopard 10.6.8 and iTunes 11.2.2 ?? Please note that at the same time Personal Hotspot via both WiFi and Bluetooth works perfectly!

    How can I tether via USB my iPhone 4S with iOS 7.1.1 to my MacBook with Snow Leopard 10.6.8 and iTunes 11.2.2 ?? Please note that at the same time Personal Hotspot via both WiFi and Bluetooth works perfectly!

    Hello, lustige luka. 
    Thank you for visiting Apple Support Communities. 
    The Personal Hotspot feature using USB  should be as simple as connecting the device to your Mac via the USB cable when Hotspot is enabled.  Here is some more information regarding this feature and an article that will provide some troubleshooting steps if you are experiencing an issue. 
    iOS: Understanding Personal Hotspot
    http://support.apple.com/kb/ht4517
    iOS: Troubleshooting Personal Hotspot
    http://support.apple.com/kb/TS2756
    Cheers,
    Jason H. 

  • Question about personal hotspot. I know I can share GSM / 3G but I would like to know if my iPhone is connected to a wifi can I also share that wifi collection, through personal hotspot?

    Question about personal hotspot. I know I can share GSM / 3G but I would like to know if my iPhone is connected to a wifi can I also share that wifi collection, through personal hotspot? And if so can it be through wifi or does it have to be Bluetooth or USB?
    Sounds like an odd question but my phone will connect to BT Openzone so I want to share that with my iPad via personal hotspot. I could use 3G but then it comes off my data allowance and I don't want to have to buy a separate SIM for my iPad if I can avoid it. I can swap my sim from my phone, but that's a pain!
    Thanks
    Luke

    No, unfortunately Personal Hotspot will only use your 3G plan.

  • TS2756 How to use personal hotspot in iPhone 5 and how to setup

    How can I use personal hotspot in iPhone 5

    Verify that your carrier supports Personal Hotspot for your device and that you have Personal Hotspot enabled on your cellular plan:
    From Here  >  http://support.apple.com/kb/HT3574
    Personal Hot spot
    iOS System Requirements  >  http://support.apple.com/kb/HT3574
    Understanding  >  http://support.apple.com/kb/HT4517
    Trouble Shooting  >  http://support.apple.com/kb/TS2756

  • HT204023 I've been using my personal hotspot between my iPhone and iPad, but I don't believe I've changed anything with my phone contract, will I be charged on my next bill?

    I've been using my personal hotspot between my iPhone and iPad, but I don't believe I've changed anything with my phone contract, will I be charged on my next bill?

    Depends on whether your carrier supports Personal Hotspot & how/if they charge for this feature. Some carriers include Personal Hotspot as part of your data plan, some require it be provisioned on your account. Contact your carrier & see what their requirements are. The fact that you have the Personal Hotspot setting indicates your carrier supports this feature.

  • Personal Hotspot continous searching

    Personal Hotspot is searching continously (Tethering)

    Solved issue. Needed to input carrier APN info under Internet Tethering as well.

  • TS2756 i'm not seeing the application personal hotspot on my 4s, what can i do to get this on my phone

    i'm not seeing the application personal hotspot on my 4s, what can i do to get this on my phone

    I'm assuming your using iTunes to sync your iPhone correct?   When you plug your iPhone into your PC/Mac..Open iTunes.  Go to music tab.  Pick the music you want on your iPhone.  Press Sync.  . I'm assuning you've done thiis before so I apologize if I sound like I'm telling you something you've already done.  If you can please give more information it would be easier to solve your problem.

  • HT204023 Can you set up a personal hotspot between a smartphone and ipad?

    How can you set up a personal hot spot between a smartphone and an ipad?

    First your smartphone, plan and carrier have to support personal hotspot or tethering. The turn it on and select the network it creates in the iPad's Settings/WiFi.

  • Personal hotspot keeps searching

    I've recently bought an iPhone5. Some how I'm not able to configure the Personal Hotspot. It keeps on searching. If someone can, please help me out.

    general  - cellular - cellular data network - scroll down to internet tethering fill the APN entry space with the same you have filled for your cellular data apn.
    now just turn on and off the cellular data by just toggling . the problem will be solved.
    first reset ur ineternet settings and then only yu do the above .

  • Personal hotspot not getting router and DNS configured

    My provider for cellular is "bob" (A1) in Austria.
    I want to make my iPad to provide network access via cellular as a personal hotspot.
    The network is broadcasted and I can see it at any other device when activating Wi-Fi.
    When I connect it times out, the iPad does not provide DNS and router address to the client.
    I have also an iPhone5 with the provider "drei" - it works without problem to activate and use the "personal hotspot" provided by the iPhone.
    I contacted "bob" - they say there is nothing the provider can do about personal hotspot, it should work, I shall contact Apple support.
    Any other experience/advise?

    Update:  I have found that if I connect my iPhone via USB and share the personal hotspot via USB that it works fine.  But if I try and share it over wifi, it maybe lasts 5 mins then the blue status bar at the top of the iPhone, flashes on and off and the internet isn't shared. 
    I have restored my iphone and updated it to 5.1.1, but still get the same!
    Can anyone suggest anything? Please help
    Thanks
    Paul

  • Can't activate Personal Hotspot on iPad 4, but can on iPhone 4...

    Hello -
    I have the new iPad and I can't get the personal hotspot to turn on. It simply has the round 'busy' icon and no on/off switch. The strange thing is that this works fine on my iPhone 4 with the same carrier (b-mobile in Bhutan).
    Has any one heard of this before?
    It seems strange that it will work with my iPhone and not my iPad..
    Thanks!
    Kyle

    Thanks for the advice. The hotspot setting is under settings, cellular data, and then personal hotspot. On mine, there is no on/off switch, only a round busy wheel that turns with no end.
    I will check with the carrier over the next few days, but it seems they support the iPhone with Personal Hotspot and not the iPad..
    That just seems odd.. Why one and not the other?

  • I am having trouble connecting to my computer via the personal hotspot on my iPhone 5s, can anyone help?

    My iPhone 5s will not connect via wi fi to my computer using the hotspot. sometimes , if I plug it in via USB it works but most times the blue"personal hotspot connection" bar just jumps and does nothing else. Anyone , can you help?

    If nothing else is working, I would reset the network settings on the iPhone. Settings/General/Reset/Reset Network Settings. Nothing will be erased from the phone, but you will need to re-enter any wifi connection you had set up previously along with re-enter any bluetooth connection you had.

  • Personal Hotspot switches from LTE and gets stuck in 3G. Won't switch back

    Hi There,
    My Personal Hotspot on my iPhone 6 switches from LTE and gets stuck in 3G service. The hotspot stays in the 3G service even when I'm back in an LTE zone. The only reason I know I'm back in an LTE service zone is because if I disable hotspot, put my phone in airplane mode, and turn it back on I get LTE service. Please note that if I wasnt using personal hotspot the phone seems to find LTE, go to 3G, and then back to LTE just fine.
    This happens while I'm commuting to work on the train and consistently pass between multiple cell phone towers.
    Any help?
    Thanks!!!

    JeffinSF wrote:
    To recreate this...First make sure WiFi is off and that you have 3G turned on (go to Settings-->General-->Network) and that you're in a real 3G area (you'll see a "3G" symbol in the upper left of the screen
    Then turn off 3G (go to Settings-->General-->Network and turn off 3G.) Wait a few seconds for the phone to switch to EDGE (you'll see the "E" indicator in the upper left of the iPhone screen once it's on EDGE). Then simply go back and turn 3G back on in Settings->General->Network. The phone SHOULD automatically reselect 3G and you'd see the "3G" again in the upper left part of the screen but instead you'll just see the same "E" in the upper left because it's not switching. To force the switchback to 3G after performing the above example, turn on Airplane mode and then turn it back off after a few seconds. For me, this always resets the radios such that 3G will again appear in the upper left of the screen and the phone will run on 3G. Otherwise it will just sit on EDGE even though I've turned 3G on. Strange but consistent.
    I just tried this and my IP4 switched to 3G after turning back on the 3G and accessing a web site. It took about 5 seconds, but it did switch on its own. It did not happen just sitting there, I had to make it do some work (by loading data).

  • Why does Office language follow the Keyboard and can it be stopped

    Hi
    To clarify here I work for a multi-language company Office is installed in US English language packs are loaded for French, German, Czech and Japanese.
    For my case I have a French Laptop but most of my communication is in English. In the office language settings everything is set to English. But the keyboard remains set in French.
    Image not included because I'm not trusted yet.
    When I open any Office document the proofing language will be French. In Word for instance at the bottom of the screen every new document opens with France (French).
    I have tried changing this via the language preferences, by GPO and by Registry hack and nothing works. The proofing tool always defaults to the user input language defined on the OS. You can change it document by document of for PowerPoint slide by slide.
    But that's not what I want. I want the spell check and grammar to check for the language I define as default.
    Has anyone got any ideas.
    Thanks

    Hi Bob,
    Thanks for your question.
    As per your description, it seems you have the Detect language automatically
    option turned on. This feature detects the language that you are typing in and enables the proofing tools for that language.
    Please try to turn off this option and then verify result:
    Open a new Word document or an email message from the Outlook client.
    On the Review tab, in the Language group, click
    Language.
    Click Set Proofing Language.
    In the Language dialog box, deselect the Detect
    language automatically check box.
    Hope this helps.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • OMA Download process running wild and can't be stopped

    About a week ago, my Bionic phone started staying hot and using battery power like crazy.  I installed an app to track processes, etc, and OMA Download (PID 1046, android.process.media) is sucking 48% of my CPU at all times.  I kill it and it comes back within seconds and keeps using CPU and battery like mad.  Sometimes it comes back as another process, but they all say "android.process.media".  I have uninstalled 99% of my third party apps, I have uninstalled all kinds of updates to apps that I cannot fully uninstall, nothing seems to kill this creature.  Anyone have any solutions?  Am I going to have to save/backup and then do a massive reset and then rebuild?  if so, how do you do the hard reset?  Also, I have tried to start in Safe Mode by using the volume button, but it never works.  is there another way to start in Safe Mode?

        Hi JWDC,
    Oh my! It sounds like you have been quite dilligent in troubleshooting your phone. You are absolutely correct in knowing that placing the phone in Safe Mode or performing a Hard Reset is a great way to help determine the nature of the processes on your phone. As you requested, I have provided links with step by step directions for both Safe Mode; http://bit.ly/mX5mec and performing a Hard Reset; http://bit.ly/nExWmP for your Motorola Droid Bionic.
    Plese keep in mind that some processes can not be completely stopped as they are imperative to the core function of the phone.
    Let us know if you have further questions.
    Thanks,
    TanishaS_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for

  • How do I set the CoreTable sort column in the managed bean?

    I have a CoreTable with two columns, first name and company, from the managed bean in a session scope, how do I set the company column to be the default/selected sort order? Or is that done by binding the af:column to a CoreColumn object in the manag

  • MAC BOOK PRO DVD

    dvd slot won't allow disc in only can be put in 1/3 of the way and it is blocked, nothing is inside now

  • Differences between 4.7 and ECC 6.0

    Hi Friends, Can anybody explain the major differences between the versions 4.7 and ECC 6.0? Thanks

  • Check box mandatory in checkbox

    hi i have checkbox which is inside my adf table i what this to be mandatory only once e.g in my table i got field firstname,surname,email,and checkbox accounting office,if i check one person as accounting oficer is ok i must not be able to check anot

  • Cfscript function vs cffunction

    Just passing on something I ran across recently:  I have a page that has 2 nested CFLOOP's, and a UDF function call inside the inner loop.  The page was consistently taking about 75 seconds to run.  Just out of curiousity, I changed the UDF from a CF